asterisk users - Mar 2006 - [1.2.5] DTMF not being set correctly (RESEND)

I apologize if this gets posted twice. Tried once about 5 or so hours 
ago, and still have not seen the message on the list....

--------------------------------

I am having trouble getting DTMF mode to be set to inband on incoming
calls.

I have the following set, and for some reason the connection is still
negotiated with rfc2833.

[outbound]
type=friend
secret=XXXXXXX
username=XXXXXXX
authuser=XXXXXXX
host=XXX.XXX.XXX.XXX
context=inbound
qualify=200
insecure=very
disallow=all
allow=ulaw
dtmfmode=inband
dtmf=inband
canreinvite=no
nat=no

Is there something that you can recommend that I add to get this to
work? I am running 1.2.5, and the rfc2833 mode works like a champ, but I
would like to be able to support inband, too.

Thanks in advance!
Steve

> I am having trouble getting DTMF mode to be set to inband on incoming
> calls.
> 
> I have the following set, and for some reason the connection is still
> negotiated with rfc2833.
> 
> [outbound]
> type=friend
> secret=XXXXXXX
> username=XXXXXXX
> authuser=XXXXXXX
> host=XXX.XXX.XXX.XXX
> context=inbound
> qualify=200
> insecure=very
> disallow=all
> allow=ulaw
> dtmfmode=inband
> dtmf=inband
> canreinvite=no
> nat=no
Since you didn't mention what device/itsp is generating the incoming 
call, I'll have to assume you are trying to use sip with an external itsp.

If that's a correct assumption, the itsp may not support inband, 
suggesting the session is rfc2833 only.

You might want to try 'sip debug' and see what's happening, or
'set
verbose xx' where xx is some large number like 30 or so. One or the 
other should provide more detail.