search for: authus

...this doesn't belong on this list, but I am just including it for problem history. I am trying to setup IMAP Voicemail with our email server. We are using a non-standards based groupware server called FirstClass. The server has some built in support for IMAP. My problem seems to be that the authuser flag is not supported. When I use mtest in the imap toolkit to connect to the FirstClass server, and input this as the Mailbox to connect to: {ares.school.da.org:143/imap/authuser=admin//user=fbeck}Inbox mtest replies: [Trying IP address [10.11.5.253]] [FirstClass IMAP4rev1 server v8.262 at m...

Hi, I have access to two providers. On one of them the authuser is the same as the username, so outgoing works. On the other one I can only get incoming - what ever combination I try for outgoing I get an error. The register command has the ability to specify both usernames (which is why incoming works) but outgoing doesn't seem to, and without that I...

...P support a spin on my home server, but without much luck so far. Asterisk 1.4.0 Dovecot 0.99.14 Maildir format C-client 2006d The imap server is also the Asterisk server, so connections are on the localhost. The error posted to the logs is: IMAP Error: Can't open mailbox {127.0.0.1:143/imap/authuser=root//user=dan_austin}INBOX: invalid remote specification Digging in the code and the c-client documentation the '//' is where additional flags would go. I've tried a number of the flags supported by the c-client library, but the results are the same. Has anyone managed to get IMAP...

...; isn't enough... Just a guess, it already solved a few problems for me. -Manuel -----Messaggio originale----- Da: Tony Hoyle [mailto:tmh@nodomain.org] Inviato: martedì, 18. maggio 2004 13:03 A: asterisk-users@lists.digium.com Oggetto: [Asterisk-Users] Configure asterisk for outgoing.. need authuser parameter? [...] [pipecall] type=peer secret=xxxxx username=xxxxx host=sipproxy.pipecall.com The first one works OK - I can dial out with no problems. The second one needs an extra field for the authuser - when I try to dial out I just get: May 17 01:03:45 NOTICE[1110916016]: chan_sip.c:5059...

Today, We have added INVITE Authentication. This seems to bring a large amount of problems to people in the way since they can't make outbound calls. Here's what needs to be done. You need to add three variables to your peers or friends, username, authuser, and secret. username=<phonenumber> authuser=<phonenumber> secret=<registration password> Dan

...(2003)? I can connect my asterisk to a local dovecot imap server without problems. But if I change the settings to our exchange server I can?t connect... Here is my config: imapserver=exchangeserver imapport=143 expungeonhangup=no imapfolder=INBOX imapflags=notls imapuser=imapuser at mydomain.de authuser=imapuser at mydomain.de authpassword=mypassword [default] default => 100,Michael Hamann,mail at mhamann.net,,attach=yes|imapuser=imapuser|imappasswd=mypassword 100 => 100,Michael Hamann,,,attach=yes|imapuser=imapuser|imappasswd=mypassword Any hints? Michael

...externip=mydomain bindaddr = 0.0.0.0 port=5060 localnet=192.168.1.0/255.255.255.0 disallow=all allow=ulaw register => num1:pass@sip.broadvoice.com register => num2:passsip.broadvoice.com tos=0x18 srvlookup=yes nat=never insecure=yes [sip.broadvoice.com] type=peer username=NUM1 fromuser=NUM1 authuser=NUM1 secret=SECRET host=sip.broadvoice.com context=sip fromdomain=sip.broadvoice.com canreinvite=no nat=never dtmfmode=inband [sip.broadvoice.com.home] type=peer username=NUM2 fromuser=NUM2 authuser=NUM2 secret=SECRET host=sip.broadvoice.com context=sip fromdomain=sip.broadvoice.com canreinvite=...

...general] 8<---- SNIP! ---->8 Register => 1212121:aaaaaaaa at sipgate.co.uk/1212121 Register => 1313131:bbbbbbbb at sipgate.co.uk/1313131 8<---- SNIP! ---->8 [sipgate] type=friend username=1212121 secret=aaaaaaaa host=sipgate.co.uk fromuser=1212121 fromdomain=sipgate.co.uk nat=yes authuser=1212121 dtmfmode=rfc2833 context=infoline_SG insecure=very canreinvite=no disallow=all allow=alaw [2sipgate2] type=friend username=1313131 secret=bbbbbbbb host=sipgate.co.uk fromuser=1313131 fromdomain=sipgate.co.uk nat=yes authuser=1313131 dtmfmode=rfc2833 context=infoline_config_SG insecure=ve...

...provided it sorts my problem) [general] port = 5060 bindaddr = 0.0.0.0 disallow=all allow=ulaw allow=alaw allow=gsm ; register => *********.******@sipgate.co.uk/******* register => ***:***********@sipgate.co.uk/****** [sipgate1] type=friend context=from-sipgate1 fromuser=****** username=**** authuser=***** secret=****** host=sipgate.co.uk fromdomain=sipgate.co.uk nat=yes dtmfmode=info qualify=yes insecure=very canreinvite=no ; [sipgate2] type=friend context=from-sipgate2 fromuser=********* username=****** authuser=******* secret=********* host=sipgate.co.uk fromdomain=sipgate.co.uk nat=yes dt...

...il I realized I had solved multiple parts of a compound problem but not all at the same time. When I put them together in the right order, it worked. I did not understand that I needed to use AUTHENTICATE PLAIN and that such authentication is a single string which pertains to the user and not the authuser. Then, once I got the right password parameter name and figured out that I could not use a distribution list rather than a real email account for shared voice mail (duh), it all fell into place. The configuration in the examples below works. It's a wonder to behold. Thanks Asterisk develope...

Well the subject line probably says it all. I have a Quintum D3000 which I'm supposed to be getting connected up to our Asterisk system. No matter what I try, neither username or authuser config works. I've also tried md5auth and it still refuses to register. Any one have a config they could share with me? Any help would be much appreciated. Neil

Hi again. I cant get my Budgetone registered in Asterisk, and I cant find what's wrong... uff. This is my config: This fragment is from my sip.conf: [12345] type=user user=12345 username=12345 secret=12345 authuser=12345 qualify=1000 nat=no host=dynamic dtmfmode=rfc2833 reinvite=no canreinvite=no disallow=all allow=g729 allow=ulaw allow=alaw context=sip_default And this is from my Budgetone configuration: SIP Server: 192.168.1.175 -- asterisk is in my LAN SIP User ID: 12345 Authenticate ID: 12345 Authenti...

...erver is dovecot, with a master password configured. I've tried plain and SHA auth, but from the logs I don't even see the asterisk master user trying to connect. Here's my voicemail.conf: [general] imapserver=localhost imapfolder=Inbox ;pollmailboxes=yes ;pollfreq=30 imapflags=notls authuser=asttest expungeonhangup=yes authpassword=whatever [default] 5252 => 5252,Test,5252 at localhost,,imapuser=5252 (I have also tried this line as: 5252 => 5252,Test,,,imapuser=5252 5252 => 5252,Test,5252 at localhost,,imapuser=5252|imappass=pass 5252 => 5252,Test,,,imapuser=5252|imappa...

Hello List. I have a question regarding connecting two asterisk servers. I'm trying to learn how asterisk comunicates from server to server. I already have a server running smoothly now, I'm installing another one to test it along side the actual one. I would like to run different scenarios: 1. Have one of the boxes at a different location outside the LAN and have them communicate. 2.

...;sip show registry" command says user B is registered. In my sip.conf I have: register => userB:password at sip.tellfree.net/userB [userB] type = peer nat = yes insecure = very canreinvite = yes qualify = yes ;---- Authentication and channel options ---- secret = xxxxxx username = yyyyyyy authuser = yyyyyyy authname = yyyyyyy fromuser = yyyyyyy host = sip.tellfree.net fromdomain = sip.tellfree.net port = 5060 context = tellfreein Is there anybody (Brazilian or not) who can give me a hint, please? Thank you. Giorgio

I configured this once now I forgot what I did. Two Broadvoice accounts. Incoming is simple - just use the phone numbers. Outgoing: Dial out on a specific line and/or set up the groups and select the other "line" if the first one is busy? -- James Taylor MetroTel 3505 Summerihll Road Suite 11 Texarkana, Texas 75503 903-793-1956

IVR Number :17275691533 When I try it from xlite configuring my provider directly, it works perfectly. When I try to dial out from dialer , it doesnt work. [sip8] type=peer username=user fromuser=user authuser=user secret=password host=8.14.146.111 nat=no canreinvite=yes insecure=very disallow=all allow=g729 allow=ulaw context=default dtmfmode=rfc2833 What cld be the reason ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-use...

I have tried to setup ssmtp to relay through gmail. root=my gmail address AuthUser=my gmail address AuthPass=my password FromLineOverride=YES mailhub=smtp.gmail.com:587 UseSTARTTLS=YES TLS_CA_FILE=/etc/pki/tls/certs/ca-bundle.crt I get this error: Authorization failed (534 5.7.14 https://support.google.com/mail/answer/78754 145sm16287775qhb.20 - gsmtp) I am not using two ste...

I don't know what's means about register in sip.conf such as: register => user:secret:authuser@host:port/extension even if I registe a sip proxy , but how use it ? I think : when incoming from sip proxy to asterisk : user a --> sip proxy --> asterisk --> pstn sip proxy : SER in ser.cfg farword ( "192.168.0.10" , 5060 ) this will forward a call to asterisk , an...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi folks, I don't really understand the extension function on: register => user:secret:authuser@host:port/extension First question - -------------- well, it's only local, or is important for authentication on external sip server? Example: I've one external sip account, the number is the URI also (111), pass 'xxx' I'll do something like: register => 111:xxx@extsip...