asterisk users - Feb 2006 - Problem with two cards Digium

Hello,

I`ve got a problem which I can`t deal with. I own 2 cards - TDM2400P and 
TE410P. I`ve put them into a HP Proliant DL380 G4 server, compiled the 
drivers according to the manual. Unfortunetly there are both cards 
channels are configured in zaptel.conf file the first module (in this 
file) sends an error.

For configuration:

span = 1, 1, 0, ccs, hdb3, crc4
fxsks = 21-24
bchan = 25-39, 41-55
dchan = 40

root# modprobe zaptel
root# modprobe wctdm24xxp
------------------------------
ZT_CHANCONFIG failed on channel 25: No such device or address (6) FATAL: 
Error running install command for wctdm24xxp

For configuration:

span = 1, 1, 0, ccs, hdb3, crc4
bchan = 1-15, 17-31
dchan = 16
fxsks = 145-148

root# modprobe zaptel
root# modprobe wct4xxp
----------------------
ZT_CHANCONFIG failed on channel 145: No such device or address (6) 
FATAL: Error running install command for wct4xxp

If the configuration applies only a single card the modules are loaded 
correctly. The analog card is equiped with one FXO module, which is 
placed in the last joint. I`ve disabled hyperthreading in my kernel and 
in BIOS, interrupts are not shared. Besides I`ve put the cards in other 
slots, switched on and off ACPI and other functions in BIOS as well as 
in my kernel. Maybe the problem is in the drivers?

I`ve attached some information which might be useful.
http://www.dir.pl/~supczinskib/logs.tgz

-- 
With best regards
Bartosz Supczinski
IT Manager


DIR
Konstytucji 3 Maja 2
86-300 Grudziadz
POLAND
www.dir.pl

t.: +48 (56) 6440100
f.: +48 (56) 6440111
m.: +48 (504) 019040

http://www.google.ca/search?hl=en&q=dl380+g4+site%3Alists.digium.com&meta
-----Original Message-----
From: Bartosz Supczinski [mailto:Bartosz.Supczinski@dir.pl]
Sent: Tuesday, February 28, 2006 7:58 PM
To: Asterisk-Users; Asterisk-Dev
Subject: [Asterisk-Users] Problem with two cards Digium


Hello,

I`ve got a problem which I can`t deal with. I own 2 cards - TDM2400P and 
TE410P. I`ve put them into a HP Proliant DL380 G4 server, compiled the 
drivers according to the manual. Unfortunetly there are both cards 
channels are configured in zaptel.conf file the first module (in this 
file) sends an error.

For configuration:

span = 1, 1, 0, ccs, hdb3, crc4
fxsks = 21-24
bchan = 25-39, 41-55
dchan = 40

root# modprobe zaptel
root# modprobe wctdm24xxp
------------------------------
ZT_CHANCONFIG failed on channel 25: No such device or address (6) FATAL: 
Error running install command for wctdm24xxp

For configuration:

span = 1, 1, 0, ccs, hdb3, crc4
bchan = 1-15, 17-31
dchan = 16
fxsks = 145-148

root# modprobe zaptel
root# modprobe wct4xxp
----------------------
ZT_CHANCONFIG failed on channel 145: No such device or address (6) 
FATAL: Error running install command for wct4xxp

If the configuration applies only a single card the modules are loaded 
correctly. The analog card is equiped with one FXO module, which is 
placed in the last joint. I`ve disabled hyperthreading in my kernel and 
in BIOS, interrupts are not shared. Besides I`ve put the cards in other 
slots, switched on and off ACPI and other functions in BIOS as well as 
in my kernel. Maybe the problem is in the drivers?

I`ve attached some information which might be useful.
http://www.dir.pl/~supczinskib/logs.tgz

-- 
With best regards
Bartosz Supczinski
IT Manager


DIR
Konstytucji 3 Maja 2
86-300 Grudziadz
POLAND
www.dir.pl

t.: +48 (56) 6440100
f.: +48 (56) 6440111
m.: +48 (504) 019040

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

I'll guess the TE410P is being loaded first - Try swapping entries in 
zaptel.conf and zapata.conf

Bart


----- Original Message ----- 
From: "Bartosz Supczinski" <Bartosz.Supczinski@dir.pl>
To: "Asterisk-Users" <asterisk-users@lists.digium.com>;
"Asterisk-Dev"
<asterisk-dev@lists.digium.com>
Sent: Tuesday, February 28, 2006 6:57 PM
Subject: [Asterisk-Users] Problem with two cards Digium

> Hello,
>
> I`ve got a problem which I can`t deal with. I own 2 cards - TDM2400P and 
> TE410P. I`ve put them into a HP Proliant DL380 G4 server, compiled the 
> drivers according to the manual. Unfortunetly there are both cards 
> channels are configured in zaptel.conf file the first module (in this 
> file) sends an error.
>
> For configuration:
>
> span = 1, 1, 0, ccs, hdb3, crc4
> fxsks = 21-24
> bchan = 25-39, 41-55
> dchan = 40
>
> root# modprobe zaptel
> root# modprobe wctdm24xxp
> ------------------------------
> ZT_CHANCONFIG failed on channel 25: No such device or address (6) FATAL: 
> Error running install command for wctdm24xxp
>
> For configuration:
>
> span = 1, 1, 0, ccs, hdb3, crc4
> bchan = 1-15, 17-31
> dchan = 16
> fxsks = 145-148
>
> root# modprobe zaptel
> root# modprobe wct4xxp
> ----------------------
> ZT_CHANCONFIG failed on channel 145: No such device or address (6) FATAL: 
> Error running install command for wct4xxp
>
> If the configuration applies only a single card the modules are loaded 
> correctly. The analog card is equiped with one FXO module, which is placed 
> in the last joint. I`ve disabled hyperthreading in my kernel and in BIOS, 
> interrupts are not shared. Besides I`ve put the cards in other slots, 
> switched on and off ACPI and other functions in BIOS as well as in my 
> kernel. Maybe the problem is in the drivers?
>
> I`ve attached some information which might be useful.
> http://www.dir.pl/~supczinskib/logs.tgz
>
> -- 
> With best regards
> Bartosz Supczinski
> IT Manager
>
>
> DIR
> Konstytucji 3 Maja 2
> 86-300 Grudziadz
> POLAND
> www.dir.pl
>
> t.: +48 (56) 6440100
> f.: +48 (56) 6440111
> m.: +48 (504) 019040
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>