asterisk users - Oct 2005 - Re: Asterisk-Users Digest, Vol 15, Issue 28

Hello All

 

Anybody had used ooH323 for asterisk

i using ooH323-0.7.2 and asterisk CVS may 2005. OpenH323 1.17.1 and pwlib 1.9.0
and GNUGK 2.0.2

audio is very good, better than SIP and IAX, but i have problem.

how to router call from openh323 to outside PSTN.

my h323.conf setting

; Objective System's H323 Configuration example for tvcti
; ooh323c driver configuration
;
; [general] section defines global parameters
;
; This is followed by profiles which can be of three types - user/peer/friend
; Name of the user profile should match with the h323id of the user device.
; For peer/friend profiles, host ip address must be provided as
"dynamic" is
; not supported as of now.
;
; Syntax for specifying a H323 device in extensions.conf is
; For Registered peers/friends profiles:
;        H323/name where name is the name of the peer/friend profile.
;
; For unregistered H.323 phones:
;        H323/ip[:port] OR if gk is used H323/alias where alias can be any H323
;                          alias
;
; For dialing into another tvcti peer at a specific exten
;       H323/exten/peer OR H323/exten@ip
;
; Domain name resolution is not yet supported.
; 
; When a H.323 user calls into tvcti, his H323ID is matched with the profile
; name and context is determined to route the call
;
; The channel driver will register all global aliases and aliases defined in 
; peer profiles with the gatekeeper, if one exists. So, that when someone
; outside our pbx (non-user) calls an extension, gatekeeper will route that 
; call to our tvcti box, from where it will be routed as per dial plan.


[general]
;Define the asetrisk server h323 endpoint

;The port tvcti should listen for incoming H323 connections.
;Default - 1720
;port=1720

;The dotted IP address tvcti should listen on for incoming H323
;connections
;Default - tries to find out local ip address on it's own
bindaddr=192.168.22.224    

;Whether tvcti should use fast-start and tunneling for H323 connections.
;Default - yes
;faststart=no
;h245tunneling=no
faststart=yes
h245tunneling=yes


;H323-ID to be used for tvcti server
;Default - tvcti PBX
;h323id=ObjSystvcti 
;e164=100

h323id=9
;e164=100
;e164=0,1,2,3,4,5,6,7,8,9,*,#

;CallerID to use for calls
;Default - Same as h323id
callerid=tvcti

;Whether this tvcti server will use gatekeeper.
;Default - DISABLE
;gatekeeper = DISCOVER
;gatekeeper = a.b.c.d
gatekeeper = 192.168.22.224

;Location for H323 log file
;Default - /var/log/tvcti/h323_log
;logfile=/var/log/tvcti/h323_log


;Following values apply to all users/peers/friends defined below, unless
;overridden within their client definition

;Sets default context all clients will be placed in.
;Default - default
context=from-h323

;Sets rtptimeout for all clients, unless overridden
;Default - 60 seconds
rtptimeout=60     ; Terminate call if 60 seconds of no RTP activity
                    ; when we're not on hold

;Type of Service
;Default - none (lowdelay, thoughput, reliability, mincost, none)
tos=lowdelay

;amaflags = default
amaflags = billing

;The account code used by default for all clients.
accountcode=h3230101

;The codecs to be used for all clients.Only ulaw and gsm supported as of now.
;Default - ulaw
; ONLY ulaw, gsm, g729 and g7231 supported as of now
disallow=all     ;Note order of disallow/allow is important.
allow=gsm
allow=ulaw
allow=alaw


; dtmf mode to be used by default for all clients. Only rfc2833 supported as
; of now.
;Default - rfc 2833
;dtmfmode=rfc2833
dtmfmode=inband

; User/peer/friend definitions:
; User config options                    Peer config options
; ------------------                     -------------------
; context                            
; disallow                               disallow
; allow                                  allow
; accountcode                            accountcode
; amaflags                               amaflags
; dtmfmode                               dtmfmode
; rtptimeout                             ip
;                                        port
;                                        h323id
;                                        email
;                                        url
;                                        e164
;                                        rtptimeout

;


[152]
type=peer
context=from-h323
;ip=a.b.c.d   ; UPDATE with appropriate ip address
;port=1720    ; UPDATE with appropriate port
;e164=0,1,2,3,4,5,6,7,8,9,*,#
e164=9911
allow=ulaw
allow=alaw    
allow=gsm

[myfriend11]
type=friend
context=from-h323
;ip=10.0.0.82   ; UPDATE with appropriate ip address
;port=1820    ; UPDATE with appropriate port
disallow=all
allow=ulaw
e164=9
rtptimeout=60
dtmfmode=rfc2833

[myfriend1]
type=friend
context=from-h323
;ip=10.0.0.82   ; UPDATE with appropriate ip address
;port=1820    ; UPDATE with appropriate port
disallow=all
allow=ulaw
;e164=7777
;h323id=tvcti_tvgk1
h323id=0,1,2,3,4,5,6,7,8,9
rtptimeout=60
;dtmfmode=rfc2833
dtmfmode=rfc2833

[abc1]
type=friend
context=from-h323
disallow=all
allow=ulaw
allow=alaw
h323id=9911

rtptimeout=60
dtmfmode=rfc2833

 

 

 

how to setup prefix for gateway GNUGK??

 

Please help me
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20051008/feb75105/attachment.htm