similar to: Re: Asterisk-Users Digest, Vol 15, Issue 28

OOH323 Debugging Enabled -- Executing Answer("SIP/3513-090f7d40", "") in new stack -- Executing Wait("SIP/3513-090f7d40", "1") in new stack -- Executing DeadAGI("SIP/3513-090f7d40", "a2billing.php|1") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php a2billing.php|1: line:58 - IDCONFIG : 1

All, I'm running (attempting to) ooh323 with Asterisk and a Cisco 2621XM router operating as a H.323 GateKeeper, however when I bring the Asterisk box up it registers successfully with the GateKeeper (exchanges GRQ/GCF, then RRQ/RCF) it notes the GateKeeper supports keepalive at 300 seconds, when it gets to time to re-register its sends an RRQ again and gets rejected with RRJ (unspecified

Hi, I am trying to communicate H323 and SIP users. I have configured h323.conf, sip.conf and ooh323.conf. If I am using gatekeeper (gnugk) then I am able to call successfully to h323 users using SJphone. And same for SIP users also. But when I disabled gatekeeper and trying to call using gateway with sjphone then every time whatever number I dial the call goes to asterisk and some computerized

Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Executing [1000 at ext-meetme:7] Read("DAHDI/2-1", "PIN|enter-conf-pin-number||||") in new stack Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Playing 'enter-conf-pin-number' (language 'en') Jan 19 10:00:43 VERBOSE [7177] logger.c: -- USER ENTERED 'THE PIN NUMBER' Jan 19 10:00:43 VERBOSE [7177] logger.c: --

Has anyone had any luck getting Asterisk 1.6.2.13 to register to a Tandberg Gatekeeper? The logs on the Asterisk end seem to show that the registration request is sent, and the Tandberg Gatekeeper responds. However, the response doesn't seem to be what Asterisk was expecting. Here is my ooh323.conf, followed by the relevant portion of the h323_log: [general] port = 1720 bindaddr =

Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Executing [1000 at ext-meetme:7] Read("DAHDI/2-1", "PIN|enter-conf-pin-number||||") in new stack Jan 19 10:00:29 VERBOSE [7177] logger.c: -- <DAHDI/2-1> Playing 'enter-conf-pin-number' (language 'en') Jan 19 10:00:43 VERBOSE [7177] logger.c: -- User entered

Hi, I'm trying to configure Asterisk as SIP-H.323 Gateway via ooh323, but I have an error relatively to the GK Confirmation message. >From the log: "H323 RAS channel creation - succesful Sent GRQ message Gatekeeper Confirmed (GCF) message received ERROR:No Gatekeeper ID present in received GKconfirmed message Ignoring message and will retransmit GRQ after timeout Error: Failed to

All, I'm haveing a bit of trouble getting my head around H.323 and call routing with Gatekeepers, Zones and intra-zone calls - hopefully someone who is more informed in things H.323 will be able to point me in the right direction...? I already have a mature network of Asterisk boxes dotted around the UK and overseas with hundreds of extensions and our own number-plan/dial-plan in the form

has anyone managed to get these three beasties to work together ? we're using ooh323 from asterisk-addons-1.2.2, asterisk 1.2.6 and microsoft netmeeting default from windows xp. the symptoms are that calls from a SIP client to NetMeeting rings on NetMeeting, but upon answering the call in NetMeeting, no audio is passed between the two. eventually, the call times out and hangs up. on a

I have searched and searched for over a week on this but can't seem to find the issue. Calls from CallManager to Asterisk are being disconnected immediately. I have setup CallManager and Asterisk per Shaun Ewing's pdf http://asterisk.edropbox.net/ccmasteriskvm.pdf I have installed Asterisk 1.4.0-beta3 on Fedora Core 5. I got libpri, zaptel, and asterisk compiled and installed.

hello all, i want to have ooh323 connection between asterisk and cisco. in my scenario, asterisk is gateway and cisco is gatekeeper. this is my ooh323.conf file: [general] port=1720 bindaddr=192.168.0.227 gateway=yes faststart=yes h245tunneling=yes h323id=gw10 at test.com settracelevel=10 gatekeeper=192.168.0.212 context=from-trunk disallow=all allow=ulaw allow=alaw allow=gsm dtmfmode=rfc2833

hello all, i want to have ooh323 connection between asterisk and cisco. in my scenario, asterisk is gateway and cisco is gatekeeper. this is my ooh323.conf file: [general] port=1720 bindaddr=192.168.0.227 gateway=yes faststart=yes h245tunneling=yes h323id=gw10 at test.com settracelevel=10 gatekeeper=192.168.0.212 context=from-trunk disallow=all allow=ulaw allow=alaw allow=gsm dtmfmode=rfc2833

On Wed, Jun 16, 2010 at 4:35 PM, Shina Owolabi <shinacalypse at gmail.com>wrote: > Hi! > I've installed Asterisk 1.4.32 with freepbx-2.6.0 in an attempt to provide > a conference bridge for an existing Avaya PBX. I have no control over the > Avaya system, but I am able to speak with the admin in charge when I need > stuff done. I am running all this in a VirtualBox

Dears; I am having same problem, that when I place a call from the H323 end point (even if it is not added in the ooh323.conf), then asterisk handle the call and play the wave file in the default context. Also I added endpoint to the ooh323.conf and same thing, it keep goes for default context whatever the context placed. My Asterisk vesion is 1.4.25 My Asterisk add-on version is: 1.4.8 What I

Stephan, Ok, I'll re-state the problem... I have two devices that I want to talk to each other: 1. an Asterisk PBX 2. a Damm Cellular TETRAFLEX digital radio system (www.damm.dk) both devices are effectively "gateways" because they have many subscribers behind them. The Damm Cellular system controller is based on Windows-XP Embedded and its sub-systems used the OpenH323

Hello, I'm trying to create a H.323 trunk between Asterisk 11 and Avaya. I have done this before between Asterisk 1.6 and Avaya but had some issues placing external calls from the Asterisk to the Public network which is connected to Avaya. I'm trying to create that trunk on Asterisk 11 because the 1.6 is outdated and has no support. On the Asterisk side I have Aastra 6731i SIP phones

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to. ID - HMA0200.10szxn-xxxx e.164 - 22xx2912

This is third time today that my Asterisk hangs up. It seams that I have problems with h323. I'm using ooh323 from Asterisk add-ons. I have the following configuration Asterisk 1.2.1 Asterisk-addons 1.2.1 Fedora Core 4 I'm using SIP phones and h323 trunk to my VoIP provider Like I said this is third time today that he hang's up. First time, I came at work and Asterisk was down.

I am running asterisk 1.0.1 with OH323 compiled in. We have a 323 trunk to CallManager with a mgcp controlled pri router. When using sip phones (directly registered with asterisk) to call out the 323 trunnk to PSTN, calls timeout after 3 rings. If I answer b4 3 rings - no problem, otherwise I get "no one is available to answer at this time" on the consoel and it redirects to an

Hi all, I have a problem with 1.6.1.7-rc1 and ENUM (with an own PowerDNS server and NAPTR record). Maybe somebody has more experience with this or can give me some input. The dialplan: exten => 292,1,Set(DIAL_NUMBER=43660123456) exten => 292,2,Set(sip= ${ENUMLOOKUP(+${DIAL_NUMBER},sip,,1,ns3.e164.xxx.com)}) ;x'ed out the domain name starting from here exten => 292,3,NoOp(${sip})