asterisk users - Mar 2005 - RE: 8 channel fxo setup outgoing call problem (cont)

Ok, I just got my 8 channel setup to dial out and back in but here is the new
issue.  It sill dials in fine with all the channels, but dialing out from inside
the asterisk system only works on the 1st channel of my 1st TDM400P card.

Now I dont have all 8 PSTN lines going into my asterisk box at this moment, only
one line for testing currently, but I should be able to plug that one line into
any of the open channels on the back of the asterisk box and have it dial out
with no problem correct?  I can plug the line into any of the channels and it
will take calls into the system just fine currently, just not call out.  It will
only call out if the PSTN line is plugged into the 1st channel on the 1st card.

I need this setup to be able to take incomming calls or send outgoing calls on
any available line at any time!  Can someone clue me in?

Thanks:

Configs: 
Zaptel.conf:

fxsks=1-8
loadzone=us
defaultzone=us

Zapata.conf:

[trunkgroups]

[channels]

musiconhold=default
rxwink=300  ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callerid=xxxxxx
callwaiting=yes
busydetect=no
callprogress=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=800
rxgain=0.0
txgain=0.0

group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=incoming
faxdetect=no

signalling=fxs_ks
callerid=asreceived
context=from-pstn
channel=>1-8
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050328/d3c8427d/attachment.htm

On Mar 28, 2005, at 3:32 PM, Mike Flynn wrote:
> Ok, I just got my 8 channel setup to dial out and back in but here is 
> the new issue.? It sill dials?in fine with all the channels, but 
> dialing out from inside the asterisk system only works on the 1st 
> channel of my 1st TDM400P card.?
> ...
> Zaptel.conf:
> ...
> Zapata.conf:
> ...
What I suspect is a problem in your dialing plan, and you didn't send 
us that (extensions.conf).

> Ok, I just got my 8 channel setup to dial out and back in but here is the
new issue.  It sill
dials in fine with all the channels, but dialing out
from
> inside the asterisk system only works on the 1st channel of my 1st TDM400P
card.
>  
> Now I dont have all 8 PSTN lines going into my asterisk box at this moment,
only one line for
testing currently, but I should be able to plug that
> one line into any of the open channels on the back of the asterisk box and
have it dial out
with no problem correct?  I can plug the line into any
> of the channels and it will take calls into the system just fine currently,
just not call out.
 It will only call out if the PSTN line is plugged into
the
> 1st channel on the 1st card. 
>  
> I need this setup to be able to take incomming calls or send outgoing calls
on any available
line at any time!  Can someone clue me in?
>  
Just for fun, try moving the pstn line to another port on the tdm card
and then stop/restart asterisk. If that doesn't prove anything, try
restarting the drivers.