Hi All,
I am installing a Zaptel Quad E1 card with ISDN PRI in Brazil and I?m with
this problem:
Asterisk CLI :
Mar 27 01:49:57 WARNING[2612]: chan_zap.c:7143 zt_pri_error: PRI: !! No
channel map, no channel, and no ds1? W
hat am I supposed to identify?
Mar 27 01:49:57 WARNING[2612]: chan_zap.c:7143 zt_pri_error: PRI: !!
Unable to add IE 'Channel Identification'
== Restart on requested on entire span 1
== Restart on requested on entire span 1
-- Executing Dial("SIP/6666-2d30", "Zap/5/88028709|20")
in new stack
-- Called 5/88028709
-- Channel 0/5, span 1 got hangup
-- Forcing restart of channel 0/5 on span 1 since channel reported in use
-- Hungup 'Zap/5-1'
== No one is available to answer at this time
-- Executing Congestion("SIP/6666-2d30", "") in new
stack
Mar 27 01:55:31 ERROR[2612]: cdr_csv.c:222 csv_log: Unable to re-open
master file /var/log/asterisk//cdr-csv//Master.csv : Permission denied
-- B-channel 0/5 successfully restarted on span 1
The light at the end of the card is green and the physical layer is UP.
Any tip?
I have this configs:
=========================================================
dmesg output:
zaptel: no version for "struct_module" found: kernel tainted.
Zapata Telephony Interface Registered on major 196
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 185
Detected Tormenta 2 Quad T1/PRI or E1/PRA at 0xdc001000/0xdc002000 irq 185
Xilinx Chip successfully loaded, configured and started!!
Tormenta 2 Quad E1/PRA Card
Detected Card number: 0
Tor2: Launching card: 0
Registered Tormenta2 PCI
Registered tone zone 0 (United States / North America)
=========================================================
ztcfg ?vv
Zaptel Configuration
=====================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03: Individual Clear channel (Default) (Slaves: 03)
Channel 04: Individual Clear channel (Default) (Slaves: 04)
Channel 05: Individual Clear channel (Default) (Slaves: 05)
Channel 06: Individual Clear channel (Default) (Slaves: 06)
Channel 07: Individual Clear channel (Default) (Slaves: 07)
Channel 08: Individual Clear channel (Default) (Slaves: 08)
Channel 09: Individual Clear channel (Default) (Slaves: 09)
Channel 10: Individual Clear channel (Default) (Slaves: 10)
Channel 11: Individual Clear channel (Default) (Slaves: 11)
Channel 12: Individual Clear channel (Default) (Slaves: 12)
Channel 13: Individual Clear channel (Default) (Slaves: 13)
Channel 14: Individual Clear channel (Default) (Slaves: 14)
Channel 15: Individual Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Individual Clear channel (Default) (Slaves: 17)
Channel 18: Individual Clear channel (Default) (Slaves: 18)
Channel 19: Individual Clear channel (Default) (Slaves: 19)
Channel 20: Individual Clear channel (Default) (Slaves: 20)
Channel 21: Individual Clear channel (Default) (Slaves: 21)
Channel 22: Individual Clear channel (Default) (Slaves: 22)
Channel 23: Individual Clear channel (Default) (Slaves: 23)
Channel 24: Individual Clear channel (Default) (Slaves: 24)
Channel 25: Individual Clear channel (Default) (Slaves: 25)
Channel 26: Individual Clear channel (Default) (Slaves: 26)
Channel 27: Individual Clear channel (Default) (Slaves: 27)
Channel 28: Individual Clear channel (Default) (Slaves: 28)
Channel 29: Individual Clear channel (Default) (Slaves: 29)
Channel 30: Individual Clear channel (Default) (Slaves: 30)
Channel 31: Individual Clear channel (Default) (Slaves: 31)
31 channels configured.
=========================================================
/etc/zaptel.conf
pan=1,0,0,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
loadzone=us
defaultzone=us
=========================================================
/etc/asterisk/zapata.conf
[channels]
language=us
context=default
switchtype=euroisdn
;If you connect to a hicom PBX set your ISDN Numbering Plan Identifier to
unknown.
pridialplan=unknown
prilocaldialplan=unknown
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
group = 1
channel => 1-15
channel => 17-31
asterisk01*CLI> zap show channel 1
Channel: 1*CLI>
File Descriptor: 14
Span: 1k01*CLI>
Extension: CLI>
Dialing: noCLI>
Context: default
Caller ID string:
Destroy: 0*CLI>
InAlarm: 0*CLI>
Signalling Type: PRI Signalling
Owner: <None>I>
Real: <None>LI>
Callwait: <None>
Threeway: <None>
Confno: -1*CLI>
Propagated Conference: -1
Real in conference: 0
DSP: nok01*CLI>
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
PRI Flags:
PRI Logical Span: Implicit
Actual Hookstate: Onhook
