similar to: E1 ISDN Problem

Greetings, I have a quad port Tormenta 2 PCI card (uses the tor2 driver), which I have been successfully using for some time on an older, power-hungry Intel machine. I recently moved it to a newer machine with an Intel Atom D510 CPU in an effort to save on energy costs, but I cannot seem to get it to work there. Both machines are running Ubuntu 13.10 x64, with DAHDI support coming from the

Hi all.. I`m with a problem in some E1 cards. The value of Bipolar Viol is too big, and some times the link seems well, but isn`t work correctly, like as if the link is down. Normally, I use to stop asterisk, remove the modules from my card, use modprove to set up they again, and start asterisk, and it come to work, but in some times I have to reboot the server, and then the value of

Hi- I've posted this on the bugs list, but I'd also like to see if others have had similar problems when connecting via E1 trunks (E400P). I'm getting numerous errors like the following during inbound calls to my E1 channels. These occur when the system is under medium load: WARNING[196621]: File chan_zap.c, Line 5404 (zt_pri_error): PRI: !! Got reject for frame 78, retransmitting

Hello,every one! I want to fabric a piece of Tormenta ISA E1 card for study. But the from http://www.zapatatelephony.org is all about Tormenta ISA T1 card. I want to know if they are using the same chips or something different bettween them. Thanks. john

Hi! I have the chance to play with a couple of E400P cards, each installed in a IBM e330 XSeries servers (2 x 1GHz P-III CPU 2 Gb RAM, 36Gb SCSI HDD with RH8.0 2.4.18-smp kernel), and I'm trying to test/benchmark this e330/E400P combo generating calls thru /var/spool/asterisk/outgoing One e400P if doing the carrier work making calls and the other just receives the calls: Server#1

Hi list, I have a asterisk box with an E400P that was running ok until last week. The machine just stop responding and after a reboot, the module (tor2) doesn't load anymore. anyone could help? regards Eduardo modprobe returns this: asterix:~# modprobe tor2 Zapata Telephony Interface Registered on major 196 Detected Tormenta 2 Quad T1/PRI or E1/PRA at 0xfe121800/0xfe121000 irq 7

Hello everyone, We have an E400P Card from phoniceq.? There is a DAHDI Driver posted at: http://e400p.phoniceq.com/driver/dahdi-tor2-tormenta3-e1.tgz but, it doesn't work.? The author (martin (or marcin) pycko) says that it isn't finished. I've e-mailed martin, and he stated that he would fix the driver AFTER we order 10 more cards, not before.? I have a difficult time ordering

Hi ! I'm trying to configurate my first asterisk system. My test plant has an E100P Card and a 4 FXS TDM 400P card. I've an E1 configured for 15 channels. Telco says that crc4 is configurated so my zaptel.conf is: loadzone = it defaultzone=it span=1,0,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 unused=17-31 fxoks=32-35 zttool shows no alarms. I've also tried changing the timing

About every hour I see the yellow alarms on all or a number of channels of my PRI which is connected to the dutch telephony network, Asterisk keeps on working fine.... Here's an example where channel 1-24 went into alarm: WARNING[90124]: File chan_zap.c, Line 4139 (handle_init_event): Detected alarm on channel 1: Yellow Alarm WARNING[90124]: File chan_zap.c, Line 4139 (handle_init_event):

(I'm producing a writeup on all the things one run into building an * box. Which after a couple of boxes is showing up aplenty.) So this uses the working h/w and config's from another box. All I do is build in a new computer. Loading the modules I got: __________________________________________________ Zaptel Configuration ====================== Channel map: Channel 01: FXS

I've got some weird behavior on my HFC-s cards. asterisk CVS-06/26/04-21:28:35, bristuff 0.02, libpri 20040510, zaptel 20040623 When i pick up my ISDN phone on Zap5-1 ("3987") and call the external number "1901" it will do so, connect me and everything is fine. In the second, where it tries to attempt the native bridge, the audio will disappear. Using another card

Hi, After temporarily pulling the T1 cable out of our Asterisk box, we ended up getting a strange error messages even after the cable was plugged back in. [...] Dec 10 09:01:11 WARNING[1192437440]: File chan_zap.c, Line 5683 (zt_pri_error): PRI: Read on 63 failed: Unknown error 500 Dec 10 09:01:21 WARNING[1192437440]: File chan_zap.c, Line 5683 (zt_pri_error): PRI: Read on 63 failed: Unknown

Good day everyone, A Solution now exists for those of you still looking for the first model of Quad T1/E1 Interface Cards - the T400P and E400P. The T400P and E400P were manufactured by Digium until a few months ago, and were designed and released under the GNU Public License as the Tormenta II by Zapata Telephony. Varion, Inc. is now in full production manufacturing these boards. With the

Hi there, my * has no Zaptel or Tormenta hardware at all, also no ztdummy. However dmesg is full of Zapata Telephony Interface Registered on major 196 No ISA tormenta card found at d0000 Zapata Telephony Interface Unloaded and /var/log/messages shows tons of this: Nov 25 21:28:28 localhost kernel: Zapata Telephony Interface Registered on major 196 Nov 25 21:28:28 localhost kernel: No ISA

Hullo everyone, Iam new to Asterix but am trying to get R2 signalling working with a Digium E100P E1/PRA Card. My Telecom doesn't have an implementation of ISDN PRI yet, so it's R2 that is supported. Could anyone have a patch to fix this for me. Am told it has something to do with Assembly Language programming. Please help me fix this. Regards, Nicholas

Hi, I am running * with E100P board. At least every our I got an Error 500 message and ISDN-PRI restarts: Jan 10 12:53:02 WARNING[98311]: File chan_zap.c, Line 5758 (zt_pri_error): PRI: Read on 27 failed: Unknown error 500 Jan 10 12:54:27 WARNING[98311]: File chan_zap.c, Line 5758 (zt_pri_error): PRI: Read on 27 failed: Unknown error 500 Jan 10 13:33:01 WARNING[98311]: File chan_zap.c, Line

Hello everyone, I try to connect the Asterisk PBX Server on my NTBA (NT1) - actually its "hard"-connected on the box, but I've tried a crosslink-ISDN cable, too. My ISDN-Phone is connected on one port (of two) S0-Ports on NTBA. When I start Asterisk and want to make a call I'll geht a lot of this messages --> 040827-034639 WARNING[213005]: chan_zap.c:6902 zt_pri_error:

Hi all, what could be the cause for the following messages? May 22 12:44:53 WARNING[3791]: chan_zap.c:8498 zt_pri_error: 2 !! Got reject for frame 0, but we only have others! May 22 12:44:54 WARNING[3791]: chan_zap.c:8498 zt_pri_error: 2 !! Got reject for frame 0, but we only have others! May 22 12:44:55 WARNING[3791]: chan_zap.c:8498 zt_pri_error: 2 !! Got reject for frame 0, but we only have

Hello all, I got a problem at an asterisk server, with dropping calls, losing all channels and reaktivating all channels and beeing back up. This problem seems to occure randomly over the whole day, when it gots traffic on the card. After looking @ google I found several hints but none did work fine. To avoid problems with the phone line (german E1) I called the provider, he did a 45 min. route

Hello... Does anybody knows what is the meaning of thoose messages ? What i'm doing wrong here ? The * works fine , both incoming and outgoing services.. WARNING[163851]: File chan_zap.c, Line 5683 (zt_pri_error): PRI: Read on 47 failed: Unknown error 500 PRI got event: 8 WARNING[163851]: File chan_zap.c, Line 5683 (zt_pri_error): PRI: Read on 47 failed: Unknown error 500 PRI got event: 6