thr3ads.net - asterisk users - [Asterisk-Users] Using a group variable for a groupofextension to dial [Jul 2004]

If this information is useful, please help other people find it:
Share via:

Wiley E. Siler

2004-Jul-17 20:06 UTC

[Asterisk-Users] Using a group variable for a groupofextension to dial

Actually doing both sounds good to me.  Can you explain further about
ringing them all at once?
Here is how I tried to make mine work and failed...

{global} 
PHONES0=SIP/2000
PHONES1=SIP/2001

[local]

exten => 6001,1,Dial(${PHONES0&PHONES1),20,trf)

When I dial 6001 I see my debugger tell me that I am using the wrong
syntax.

Do you know the correct syntax for ringing them all at once?

I will check out the queue system you referenced.

Thanks!
Wiley

 

-----Original Message-----
From: Seth Remington [mailto:sremington@saberlogic.com] 
Sent: Saturday, July 17, 2004 7:45 PM
To: asterisk-users@lists.digium.com
Subject: RE: [Asterisk-Users] Using a group variable for a
groupofextension to dial

It would ring all three at the same time. You are probably looking for a
roundrobin call queue ->
http://www.voip-info.org/wiki-Asterisk+call+queues

I have never set up a call queue myself so I can't help you more than
pointing you to the link. You could also do what you want with just the
dialplan...

exten => 501,1,Dial(SIP/Phone1,10)
exten => 501,2,Dial(SIP/Phone2,10)
exten => 501,3,Dial(SIP/Phone3,10)

That would ring phone 1 for ten seconds, if it wasn't answered it would
ring phone 2 for ten seconds, etc...

-Seth


On Sat, 2004-07-17 at 22:05, Wiley E. Siler wrote:> That could be it.  What I want to do is set a group of callers and 
> have the event cause the phone to ring them in order.  I will tie it 
> to my IVR portion and thus I can make sure peole in sales get calls 
> based on our hierarchy in the office.  So if I am reading your example
> right the syntax is....
> 
> Exten => 501,1,Dial(SIP/PHONE1&SIP/PHONE2&SIP/PHONE3), rtf)
> 
> Is that a valid way to cause it to ring through each of these 
> extensions or would that result in these three extensions all ringing
togeher?> 
> Thanks!
> Wiley
> 
> 
> 
> -----Original Message-----
> From: Seth Remington [mailto:sremington@saberlogic.com]
> Sent: Saturday, July 17, 2004 6:35 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [Asterisk-Users] Using a group variable for a group 
> ofextension to dial
> 
> Maybe I am misunderstanding your question but are you looking for the 
> '&' operator?
> 
>
Dial(type1/identifier1&type2/identifier2&type3/identifier3...,timeout,
> op
> tions,URL)
> 
> -Seth
> 
> On Sat, 2004-07-17 at 19:24, Wiley E. Siler wrote:
> > I ahve been searching to no avail for a referenc eon how to setup a 
> > part of my dial plan that will ring certain groups of number based 
> > upon the context.  Essentually, I want to be able to designate 3 
> > people as sales and have my IVR handoff and ring their extensions in
> > order.  Then maybe I will ahve a couple of people I group together 
> > and
> 
> > have them ring if someone selects 2 on the IVR for tech support.
> > Someone used some sytax that employed something like ($GROUP1, 
> > GROUP2,
> > GROUP3) that accomplished this but I cannot find any reference to it
> > after googling since ysterday.  Does anyone know how to accomplish 
> > this task?
> >  
> > Thanks,
> > Wiley
> >  
> --
> Seth Remington
> SaberLogic, LLC
> 661-B Weber Drive
> Wadsworth, Ohio 44281
> Phone: (330)335-6442
> Fax: (330)336-8559
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users--
Seth Remington
SaberLogic, LLC
661-B Weber Drive
Wadsworth, Ohio 44281
Phone: (330)335-6442
Fax: (330)336-8559

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Seth Remington

2004-Jul-17 20:43 UTC

head link

[Asterisk-Users] Using a group variable for a groupofextension to dial

Change {global} to [globals] and
exten => 6001,1,Dial(${PHONES0&PHONES1),20,trf) to
exten => 6001,1,Dial(${PHONES0}&${PHONES1},20,trf)

Your variable syntax is slightly off.
http://www.voip-info.org/wiki-Asterisk+variables

-Seth

On Sat, 2004-07-17 at 23:06, Wiley E. Siler wrote:> Actually doing both sounds good to me.  Can you explain further about
> ringing them all at once?
> Here is how I tried to make mine work and failed...
> 
> {global} 
> PHONES0=SIP/2000
> PHONES1=SIP/2001
> 
> [local]
> 
> exten => 6001,1,Dial(${PHONES0&PHONES1),20,trf)
> 
> When I dial 6001 I see my debugger tell me that I am using the wrong
> syntax.
> 
> Do you know the correct syntax for ringing them all at once?
> 
> I will check out the queue system you referenced.
> 
> Thanks!
> Wiley
> 
>  
> 
> -----Original Message-----
> From: Seth Remington [mailto:sremington@saberlogic.com] 
> Sent: Saturday, July 17, 2004 7:45 PM
> To: asterisk-users@lists.digium.com
> Subject: RE: [Asterisk-Users] Using a group variable for a
> groupofextension to dial
> 
> It would ring all three at the same time. You are probably looking for a
> roundrobin call queue ->
> http://www.voip-info.org/wiki-Asterisk+call+queues
> 
> I have never set up a call queue myself so I can't help you more than
> pointing you to the link. You could also do what you want with just the
> dialplan...
> 
> exten => 501,1,Dial(SIP/Phone1,10)
> exten => 501,2,Dial(SIP/Phone2,10)
> exten => 501,3,Dial(SIP/Phone3,10)
> 
> That would ring phone 1 for ten seconds, if it wasn't answered it would
> ring phone 2 for ten seconds, etc...
> 
> -Seth
> 
> 
> On Sat, 2004-07-17 at 22:05, Wiley E. Siler wrote:
> > That could be it.  What I want to do is set a group of callers and 
> > have the event cause the phone to ring them in order.  I will tie it 
> > to my IVR portion and thus I can make sure peole in sales get calls 
> > based on our hierarchy in the office.  So if I am reading your example
> 
> > right the syntax is....
> > 
> > Exten => 501,1,Dial(SIP/PHONE1&SIP/PHONE2&SIP/PHONE3), rtf)
> > 
> > Is that a valid way to cause it to ring through each of these 
> > extensions or would that result in these three extensions all ringing
> togeher?
> > 
> > Thanks!
> > Wiley
> > 
> > 
> > 
> > -----Original Message-----
> > From: Seth Remington [mailto:sremington@saberlogic.com]
> > Sent: Saturday, July 17, 2004 6:35 PM
> > To: asterisk-users@lists.digium.com
> > Subject: Re: [Asterisk-Users] Using a group variable for a group 
> > ofextension to dial
> > 
> > Maybe I am misunderstanding your question but are you looking for the 
> > '&' operator?
> > 
> >
Dial(type1/identifier1&type2/identifier2&type3/identifier3...,timeout,
> > op
> > tions,URL)
> > 
> > -Seth
> > 
> > On Sat, 2004-07-17 at 19:24, Wiley E. Siler wrote:
> > > I ahve been searching to no avail for a referenc eon how to setup
a
> > > part of my dial plan that will ring certain groups of number
based
> > > upon the context.  Essentually, I want to be able to designate 3 
> > > people as sales and have my IVR handoff and ring their extensions
in
> 
> > > order.  Then maybe I will ahve a couple of people I group
together
> > > and
> > 
> > > have them ring if someone selects 2 on the IVR for tech support.
> > > Someone used some sytax that employed something like ($GROUP1, 
> > > GROUP2,
> > > GROUP3) that accomplished this but I cannot find any reference to
it
> 
> > > after googling since ysterday.  Does anyone know how to
accomplish
> > > this task?
> > >  
> > > Thanks,
> > > Wiley
> > >  
> > --
> > Seth Remington
> > SaberLogic, LLC
> > 661-B Weber Drive
> > Wadsworth, Ohio 44281
> > Phone: (330)335-6442
> > Fax: (330)336-8559
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> --
> Seth Remington
> SaberLogic, LLC
> 661-B Weber Drive
> Wadsworth, Ohio 44281
> Phone: (330)335-6442
> Fax: (330)336-8559
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users-- 
Seth Remington
SaberLogic, LLC
661-B Weber Drive
Wadsworth, Ohio 44281
Phone: (330)335-6442
Fax: (330)336-8559

Maybe Matching Threads

Search for more possibly parallel threads

asterisk users - Jul 2004 - Using a group variable for a groupofextension to dial

[Asterisk-Users] Using a group variable for a groupofextension to dial

[Asterisk-Users] Using a group variable for a groupofextension to dial

Maybe Matching Threads