Greg Scasny
2004-Apr-24 22:53 UTC
\[Asterisk-Users] Adtran Channel Bank? - Email found in subject
Jay, I have had a lot of trouble with the FXO ports on Adtran TA750. Unless the incoming POTS lines have a balance impedance, they will buzz very bad. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jay Milk Sent: Sunday, April 25, 2004 12:16 AM To: asterisk-users@lists.digium.com Subject: [SPAM] - [Asterisk-Users] Adtran Channel Bank? - Email found in subject I'm new to Asterisk -- don't have it set-up yet, just comparing options. Can I do this: Wildcard T100P going into an Adtran Total Access 750 or 850, purchased from ebay -- most of those come with a few FXS cards; swap one quad-FXS with a quad-FXO card for four CO lines and up to 20 analog extensions. If I understand correctly, I can also terminate a couple of SIP connections (* acts as a SIP client) as well as create SIP extensions (* as a SIP server). What kind of processor would I need for this? Will the "leftover" P2-233 be enough, should I revive a 1.2GHz Celeron, or should I free up an Athlon 2200+ for this? Or start fresh with a 2.5+ GHz Celeron (or P4?) As for call volume, this is mainly a super-charged home-office. Asterisk is mainly for the "cool" factor and won't handle more than two calls (four channels) at a time. The business line should receive more polished call-handling, the home-lines should become more practical (ring my wife's extension during business hours, etc). How (and how well) does * support ADSI? Can I pump out data to ADSI-capable phones through a T100P and Adtran Channel bank? Thanks in advance. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Jay Milk
2004-Apr-25 17:30 UTC
\[Asterisk-Users] Adtran Channel Bank? - Email found in subject
What if the incoming POTS are actually FXS ports of an ATA186? What's the alternative for FXOs? How would a 12/12 CAC compare? After looking at various options, it seems by scarcest commodity are PCI slots, so I'd like to use a solution where each CO line won't cost me a slot. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Greg Scasny Sent: Sunday, April 25, 2004 12:54 AM To: asterisk-users@lists.digium.com Subject: RE: \[Asterisk-Users] Adtran Channel Bank? - Email found in subject Jay, I have had a lot of trouble with the FXO ports on Adtran TA750. Unless the incoming POTS lines have a balance impedance, they will buzz very bad. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jay Milk Sent: Sunday, April 25, 2004 12:16 AM To: asterisk-users@lists.digium.com Subject: [SPAM] - [Asterisk-Users] Adtran Channel Bank? - Email found in subject I'm new to Asterisk -- don't have it set-up yet, just comparing options. Can I do this: Wildcard T100P going into an Adtran Total Access 750 or 850, purchased from ebay -- most of those come with a few FXS cards; swap one quad-FXS with a quad-FXO card for four CO lines and up to 20 analog extensions. If I understand correctly, I can also terminate a couple of SIP connections (* acts as a SIP client) as well as create SIP extensions (* as a SIP server). What kind of processor would I need for this? Will the "leftover" P2-233 be enough, should I revive a 1.2GHz Celeron, or should I free up an Athlon 2200+ for this? Or start fresh with a 2.5+ GHz Celeron (or P4?) As for call volume, this is mainly a super-charged home-office. Asterisk is mainly for the "cool" factor and won't handle more than two calls (four channels) at a time. The business line should receive more polished call-handling, the home-lines should become more practical (ring my wife's extension during business hours, etc). How (and how well) does * support ADSI? Can I pump out data to ADSI-capable phones through a T100P and Adtran Channel bank? Thanks in advance. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users