asterisk users - Jan 2004 - Static Noise coming from Wildcard FXS: Wildcard TDM400P

I recently plugged in Phone to my TDM400P Card to test out something I
mostly use sip phones to interface with *. All of sudden I'm getting lot of
line static noise coming of the card is there any settings I should look at
or anything I need to do on the command line at this point I'm open to any
ideas
I'm running
0.7.1 on Redhat 9.0 machine.

Any insight would be greatly appreciated.

-Frankie Gravato
[aolim]:cronparser
[irc]:crontibs

On Wed, 14 Jan 2004 nanog@cfsdigital.com wrote:
> I recently plugged in Phone to my TDM400P Card to test out something I
> mostly use sip phones to interface with *. All of sudden I'm getting
lot of
> line static noise coming of the card is there any settings I should look at
> or anything I need to do on the command line at this point I'm open to
any
> ideas
If it is an old card (without the 12V drive power cable connector), stop
*, unload the modules, reload them, restart *.  That will fix it.

You are probably sharing an interrupt with the card and something else in
your machine.  Get it onto its own interrupt.  That fixed the problem for
me.  My guess is that the driver isn't smart enough to notice this failure
and reinitialize the card.

-- 
Joel

I had the same problem, I reseated the daughter card on the board and that
helped but just for a short time.  Eventually the port wouldn't even break
dial-tone. All other ports 2, 3&4 on the card were fine, it was only port 1
giving a problem.  I swapped daughter boards around between ports but the
problem stayed with port 1.  Maybe this is a sign of a bad run of TDM boards
with some component associated with port one.  I'm in the process of RMA
with Digium for a new card.


What port is the problem you are experiencing?

JR

-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of
nanog@cfsdigital.com
Sent: Wednesday, January 14, 2004 6:04 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Static Noise coming from Wildcard FXS: Wildcard
TDM400P

I recently plugged in Phone to my TDM400P Card to test out something I
mostly use sip phones to interface with *. All of sudden I'm getting lot of
line static noise coming of the card is there any settings I should look at
or anything I need to do on the command line at this point I'm open to any
ideas
I'm running
0.7.1 on Redhat 9.0 machine.

Any insight would be greatly appreciated.

-Frankie Gravato
[aolim]:cronparser
[irc]:crontibs

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users