I installed Asterisk as per instructions in the FAQ on the digium.com site. Double checked it. I also think they have a bug in the zapata.conf where the context should be incoming and not internal. 1) I hear no dialtone when I pickup the phone on the S100U. Asterisk sees the event and displays the message on the screen. I tried dialing but nothing happens. I hangup and * shows the hangup event. I did set the phone.conf mode to be dialtone but nothing works. 2) I can dial from the outside and the phone on the S100U rings. Asterisk shows Ringing. However when I pick it up it says "Attempting to Bridge". I wait a while but doesnt work. There is no communication between the outside phone and the one on the S100U. There is no sound card in the machine. I assume its not the problem. The machine is an RH9 with 2.2Ghz and 256RAM. Any ideas or help would be appreciated. -- Costas Menico Meezon Software Corp 201-224-8111 costas@meezon.com --
Hi Costas- I had similar problems getting my Dev Lite setup working initially. I don't remember how I had it set up initially, but here's what works for me now. I'm also under Red Hat 9. I still have some flakiness with the USB device, but most of the time it works ok. ADD TO YOUR rc.local inititialization file: rmmod usb-uhci modprobe usb-uhci modprobe wcfxo modprobe wcusb sleep 1 ztcfg -vv sleep 1 ALSO, /etc/zaptel.conf should be fxsks=1 fxoks=2 loadzone = us defaultzone=us AND, /etc/asterisk/zapata.conf should include something like this: context=home signalling=fxs_ks context=incoming channel => 1 signalling=fxo_ks context=outgoing channel => 2 GOOD LUCK! Scott Scott M. Stingel Emerging Voice Technology Inc. Email: scott@evtmedia.com <mailto:scott@evtmedia.com> URL: www.evtmedia.com <http://www.evtmedia.com>> -----Original Message----- > From: asterisk-users-admin@lists.digium.com > [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of costas > Sent: Saturday, October 25, 2003 12:44 AM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Help with Dev Kit Lite > > > I installed Asterisk as per instructions in the FAQ on the > digium.com site. Double checked it. I also think they have a > bug in the zapata.conf where the context should be incoming > and not internal. > > 1) I hear no dialtone when I pickup the phone on the S100U. > Asterisk sees the event and displays the message on the > screen. I tried dialing but nothing happens. I hangup and * > shows the hangup event. > I did set the phone.conf mode to be dialtone but nothing works. > > 2) I can dial from the outside and the phone on the S100U > rings. Asterisk shows Ringing. However when I pick it up it > says "Attempting to Bridge". I wait a while but doesnt work. > There is no communication between the outside phone and the > one on the S100U. > > There is no sound card in the machine. I assume its not the problem. > > The machine is an RH9 with 2.2Ghz and 256RAM. > > Any ideas or help would be appreciated. > > > > -- > Costas Menico > Meezon Software Corp > 201-224-8111 > costas@meezon.com > > -- > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > >
costas wrote:>I installed Asterisk as per instructions in the FAQ on the digium.com site. Double checked it. I also think they have a bug in the zapata.conf where the context should be incoming and not internal. > >1) I hear no dialtone when I pickup the phone on the S100U. Asterisk sees the event and displays the message on the screen. I tried dialing but nothing happens. I hangup and * shows the hangup event. >I did set the phone.conf mode to be dialtone but nothing works. > >2) I can dial from the outside and the phone on the S100U rings. Asterisk shows Ringing. However when I pick it up it says "Attempting to Bridge". I wait a while but doesnt work. There is no communication between the outside phone and the one on the S100U. > >There is no sound card in the machine. I assume its not the problem. > >The machine is an RH9 with 2.2Ghz and 256RAM. > >Any ideas or help would be appreciated. > > >I had similar problems with my S100U.. In fact I went through three of them in 6 months... The just kept breaking.. So I would be inclined to suspect a faulty S100U over an incorrect configuration.. Later..
How did you determine that they are faulty? Did Digium replace them? Thanks ---------- Original Message ---------------------------------- From: WipeOut <wipe_out@onetel.com> Reply-To: asterisk-users@lists.digium.com Date: Sat, 25 Oct 2003 08:39:31 +0100>costas wrote: > >>I installed Asterisk as per instructions in the FAQ on the digium.com site. Double checked it. I also think they have a bug in the zapata.conf where the context should be incoming and not internal. >> >>1) I hear no dialtone when I pickup the phone on the S100U. Asterisk sees the event and displays the message on the screen. I tried dialing but nothing happens. I hangup and * shows the hangup event. >>I did set the phone.conf mode to be dialtone but nothing works. >> >>2) I can dial from the outside and the phone on the S100U rings. Asterisk shows Ringing. However when I pick it up it says "Attempting to Bridge". I wait a while but doesnt work. There is no communication between the outside phone and the one on the S100U. >> >>There is no sound card in the machine. I assume its not the problem. >> >>The machine is an RH9 with 2.2Ghz and 256RAM. >> >>Any ideas or help would be appreciated. >> >> >> > I had similar problems with my S100U.. In fact I went through three of >them in 6 months... The just kept breaking.. > >So I would be inclined to suspect a faulty S100U over an incorrect >configuration.. > >Later.. > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >-- Costas Menico Meezon Software Corp 201-224-8111 costas@meezon.com --
costas wrote:>How did you determine that they are faulty? Did Digium replace them? > >Thanks > > >Well when I started the device worked and over time the phone started crackling and then randomly stopped providing dial tone and then stopped providing dial tone at all.. I am in the UK so I contacted the agent that I got it from and it was swapped out..