Yes, you are missing these options in the DHCP server: 66 'Boot Server Host Name' (the tftp server IP) 67 'Bootfile Name' (pxelinux.0) -----Original Message----- From: Pierre VIALLET [mailto:pvt at auvitran.com] Sent: Wednesday, February 12, 2003 10:18 AM To: syslinux at zytor.com Subject: [syslinux] PXE boot from Windows XP Hi, I want to boot a VIA EPIA Motherboard from a Windows XP OS. It's a PXE compliant card. I do a isolinux cd to boot on it, but i'm thinking that it can be more usable in my case if i can boot from lan. I can use a linux server. I'm using a solution base on Magik DHCP server & Tftpd32. PXE linux start corectly : PXELINUX 2.01 2003-01-31 Copyrigth (C) 1994-2002 H.Peter Anvin UNDI data segment at: 00094B30 UNDI data segment size: 9750 UNDI code segment at: 0009E280 UNDI code segment size: 1706 PXE entry point found (we hope) at 9D98:00F6 My IP address seems to be C0A800DF 192.168.0.223 ip=192.168.0.223:0.0.0.0:192.168.0.1:255.255.255.0 TFTP prefix ^^^^^^^ Trying to load: pxelinux.cfg/C0A800DF When I monitor my lan (with ethereal) I show that my client (192.168.0.223) ask pxelinux.cfg/C0A800DF to 0.0.0.0 Can it be a DHCP missing option ? _______________________________________________ SYSLINUX mailing list Submissions to SYSLINUX at zytor.com Unsubscribe or set options at: http://www.zytor.com/mailman/listinfo/syslinux Please do not send private replies to mailing list traffic.
What exact version of tftpd32 are you running? the lastest is buggy, try version 2.21(i think) -----Original Message----- From: Pierre VIALLET [mailto:pvt at auvitran.com] Sent: Wednesday, February 12, 2003 8:21 PM To: syslinux at zytor.com Subject: RE: [syslinux] PXE boot from Windows XP I think this option are OK : the pb arrive after that pxelinux.0 runs ... with ethereal I show that the client (pxelinux) want to download by tftp the config file pxelinux.cfg/C0A800DF on to the 0.0.0.0 tftp server. Do you have an idear ? Yes, you are missing these options in the DHCP server: 66 'Boot Server Host Name' (the tftp server IP) 67 'Bootfile Name' (pxelinux.0) Hi, I want to boot a VIA EPIA Motherboard from a Windows XP OS. It's a PXE compliant card. I do a isolinux cd to boot on it, but i'm thinking that it can be more usable in my case if i can boot from lan. I can use a linux server. I'm using a solution base on Magik DHCP server & Tftpd32. PXE linux start corectly : PXELINUX 2.01 2003-01-31 Copyrigth (C) 1994-2002 H.Peter Anvin UNDI data segment at: 00094B30 UNDI data segment size: 9750 UNDI code segment at: 0009E280 UNDI code segment size: 1706 PXE entry point found (we hope) at 9D98:00F6 My IP address seems to be C0A800DF 192.168.0.223 ip=192.168.0.223:0.0.0.0:192.168.0.1:255.255.255.0 TFTP prefix ^^^^^^^ Trying to load: pxelinux.cfg/C0A800DF When I monitor my lan (with ethereal) I show that my client (192.168.0.223) ask pxelinux.cfg/C0A800DF to 0.0.0.0 Can it be a DHCP missing option ? _______________________________________________ SYSLINUX mailing list Submissions to SYSLINUX at zytor.com Unsubscribe or set options at: http://www.zytor.com/mailman/listinfo/syslinux Please do not send private replies to mailing list traffic.
Hi, I want to boot a VIA EPIA Motherboard from a Windows XP OS. It's a PXE compliant card. I do a isolinux cd to boot on it, but i'm thinking that it can be more usable in my case if i can boot from lan. I can use a linux server. I'm using a solution base on Magik DHCP server & Tftpd32. PXE linux start corectly : PXELINUX 2.01 2003-01-31 Copyrigth (C) 1994-2002 H.Peter Anvin UNDI data segment at: 00094B30 UNDI data segment size: 9750 UNDI code segment at: 0009E280 UNDI code segment size: 1706 PXE entry point found (we hope) at 9D98:00F6 My IP address seems to be C0A800DF 192.168.0.223 ip=192.168.0.223:0.0.0.0:192.168.0.1:255.255.255.0 TFTP prefix ^^^^^^^ Trying to load: pxelinux.cfg/C0A800DF When I monitor my lan (with ethereal) I show that my client (192.168.0.223) ask pxelinux.cfg/C0A800DF to 0.0.0.0 Can it be a DHCP missing option ?
Hi ! It seems that Philippe has released version 2.52 recently, bugfix - the tsize was broken - 2.52 works OK here... \Thomas -----Original Message----- From: Luis.F.Correia [mailto:Luis.F.Correia at seg-social.pt] Sent: 12. februar 2003 10:25 To: syslinux at zytor.com Subject: RE: [syslinux] PXE boot from Windows XP What exact version of tftpd32 are you running? the lastest is buggy, try version 2.21(i think) -----Original Message----- From: Pierre VIALLET [mailto:pvt at auvitran.com] Sent: Wednesday, February 12, 2003 8:21 PM To: syslinux at zytor.com Subject: RE: [syslinux] PXE boot from Windows XP I think this option are OK : the pb arrive after that pxelinux.0 runs ... with ethereal I show that the client (pxelinux) want to download by tftp the config file pxelinux.cfg/C0A800DF on to the 0.0.0.0 tftp server. Do you have an idear ? Yes, you are missing these options in the DHCP server: 66 'Boot Server Host Name' (the tftp server IP) 67 'Bootfile Name' (pxelinux.0) Hi, I want to boot a VIA EPIA Motherboard from a Windows XP OS. It's a PXE compliant card. I do a isolinux cd to boot on it, but i'm thinking that it can be more usable in my case if i can boot from lan. I can use a linux server. I'm using a solution base on Magik DHCP server & Tftpd32. PXE linux start corectly : PXELINUX 2.01 2003-01-31 Copyrigth (C) 1994-2002 H.Peter Anvin UNDI data segment at: 00094B30 UNDI data segment size: 9750 UNDI code segment at: 0009E280 UNDI code segment size: 1706 PXE entry point found (we hope) at 9D98:00F6 My IP address seems to be C0A800DF 192.168.0.223 ip=192.168.0.223:0.0.0.0:192.168.0.1:255.255.255.0 TFTP prefix ^^^^^^^ Trying to load: pxelinux.cfg/C0A800DF When I monitor my lan (with ethereal) I show that my client (192.168.0.223) ask pxelinux.cfg/C0A800DF to 0.0.0.0 Can it be a DHCP missing option ? _______________________________________________ SYSLINUX mailing list Submissions to SYSLINUX at zytor.com Unsubscribe or set options at: http://www.zytor.com/mailman/listinfo/syslinux Please do not send private replies to mailing list traffic. _______________________________________________ SYSLINUX mailing list Submissions to SYSLINUX at zytor.com Unsubscribe or set options at: http://www.zytor.com/mailman/listinfo/syslinux Please do not send private replies to mailing list traffic.
I think this option are OK : the pb arrive after that pxelinux.0 runs ... with ethereal I show that the client (pxelinux) want to download by tftp the config file pxelinux.cfg/C0A800DF on to the 0.0.0.0 tftp server. Do you have an idear ? Yes, you are missing these options in the DHCP server: 66 'Boot Server Host Name' (the tftp server IP) 67 'Bootfile Name' (pxelinux.0) Hi, I want to boot a VIA EPIA Motherboard from a Windows XP OS. It's a PXE compliant card. I do a isolinux cd to boot on it, but i'm thinking that it can be more usable in my case if i can boot from lan. I can use a linux server. I'm using a solution base on Magik DHCP server & Tftpd32. PXE linux start corectly : PXELINUX 2.01 2003-01-31 Copyrigth (C) 1994-2002 H.Peter Anvin UNDI data segment at: 00094B30 UNDI data segment size: 9750 UNDI code segment at: 0009E280 UNDI code segment size: 1706 PXE entry point found (we hope) at 9D98:00F6 My IP address seems to be C0A800DF 192.168.0.223 ip=192.168.0.223:0.0.0.0:192.168.0.1:255.255.255.0 TFTP prefix ^^^^^^^ Trying to load: pxelinux.cfg/C0A800DF When I monitor my lan (with ethereal) I show that my client (192.168.0.223) ask pxelinux.cfg/C0A800DF to 0.0.0.0 Can it be a DHCP missing option ?
> -----Message d'origine----- > De : Pierre VIALLET [mailto:pvt at auvitran.com] > Envoy? : vendredi 14 f?vrier 2003 10:04 > ? : syslinux at zytor.com > Objet : RE : RE: PXE boot from Windows XP > > Hi, > > Thank a lot for your help. > > I test Bootp/DHCP (http://home.t-online.de/home/hanewin/dhcp1816d.exe)from http://home.t-online.de and it seems to be ok !> > I contacted Phillipe to help him to corect some pb on TFTP32. > >