search for: undi

I have already a running automated Deployment system using pxelinux and tftd and a 1,44 floppy image (memdisk) with ms-dos and 3-com undi drivers. The whole thing is working good, and i am not unhappy about it. But, the dos image solution has a few disadvanatages, because i cannot find a mtftp client for ms-dos to deploy a lot of system at the same time. Under linux such client exists, but i want to have a linux image that is also...

Hello, We use undi_drv.exe that is provided with Symantec Ghost Enterprise. This driver loads a UNDI PXE stack into memory. It, along with a UNDI packet driver are bundled into a 1.44MB disk image that we use for netbooting computer lab machines into the ghost client. This is done with pxelinux. This driver has...

...d accessing files over a network share. Having some success with the Microsoft network DOS client, it seems that many programs have issues with its IPX support - so, now I'm trying to use Novell's IPX driver instead. Unfortunately it seems I need an ODI driver to do this, and there are no UNDI/PXE -> ODI drivers available. I have found PDEther however, which is a Packet -> ODI driver, which means I could do something like this: Boot PXE Load UNDI/PXE -> Packet driver Load Packet -> ODI driver Load ODI -> IPX driver Except that I can't find an UNDI/PXE -> Packet d...

...a isolinux cd to boot on it, but i'm thinking that it can be more usable in my case if i can boot from lan. I can use a linux server. I'm using a solution base on Magik DHCP server & Tftpd32. PXE linux start corectly : PXELINUX 2.01 2003-01-31 Copyrigth (C) 1994-2002 H.Peter Anvin UNDI data segment at: 00094B30 UNDI data segment size: 9750 UNDI code segment at: 0009E280 UNDI code segment size: 1706 PXE entry point found (we hope) at 9D98:00F6 My IP address seems to be C0A800DF 192.168.0.223 ip=192.168.0.223:0.0.0.0:192.168.0.1:255.255.255.0 TFTP prefix ^^^^^^^ Trying to loa...

...s - that's at least 69 boot options... Hope this helps. Regards, Rijk -----Original Message----- From: Aaron McSorley [mailto:aaron.mcsorley at amd.com] Sent: Wednesday, January 14, 2004 8:36 PM To: Philippe Gramoull? Cc: syslinux at zytor.com Subject: [syslinux] Re: pxegrub + memdisk + dos + undi In our testing, pxelinux and Dos UNDI is much more stable than pxegrub with ten different nic drivers compiled in. The only thing holding us back on using pxelinux for all of our tftp images is the lack of a menu system. We are very close to buying a proprietary software but, I would much rat...

Hi, I work in Dell Support and I have a customer with a PowerEdge 1650 Server with Intel? PRO/1000 XT (82544GC Gigabit Ethernet Controllers). The nic is integrated on the motherboard. The customer is using a Linux system with DHCP+tftp to PXE boot and load an MS-Dos 6.22 image, with an UNDI driver, over to the PowerEdge 1650 and then map a Samba share to install Windows 2000. The customer get the following problem: If the Samba Server is located on a different subnet from the PowerEdge 1650 data transfer fail's, Some of the files are corrupt after transfer. However if the Samba S...

...e looking for. Please keep this list updated. Best regards, Rijk -----Original Message----- From: Aaron McSorley [mailto:aaron.mcsorley at amd.com] Sent: Thursday, January 15, 2004 4:56 PM To: rbitter at cntnl.jnj.com Cc: syslinux at zytor.com Subject: RE: [syslinux] Re: pxegrub + memdisk + dos + undi That is what we are doing now but, we have many images that change frequently. I display menu text files just as you say, and use the Function keys for sub menus. For organization and speed this becomes confusing for the people selecting the images, especially when the images change. We are s...

HPA et al.: Are there any plans for pxelinux to support UNDI-3.1, as defined in UEFI-2.1, appendix E? I ask because I was dismayed to see EFI systems successfully download pxelinux, only to have pxelinux exit. This was a major downer after implementing an debugging an entire EFI "UNDI" driver. Scanning pxelinux.asm, I conclude that pxelinux...

Hello I wonder, if you know any more about the possibilities of having a standard Network driver for most cards. Is there any such thing for linux? Where do I get it? Is there possibly something for DOS? A UNDI Packetdriver would be cool, because then I could use DosSCP on every Network card I would ever be using with MemDisk (which in turn is very cool.) bye Christian (thinking about writing own PXE/UNDI Packetdriver) -- HiWi PC-Administration Rechenzentrum TU-Clausthal mailto:christian.marg at tu-clau...

I'm using PxeLinux to bot DOS images for an automated test application. After Running the DOS application program, I want to use the UNDI stack to send a completion status message to the server. I boot the DOS image with keeppxe, so that the UNDI stack will continue to be in memory. I am not clear as to what state the stack is left in after PxeLinux has loaded and transferred control to the DOS image. Do I need to go through all...

In our testing, pxelinux and Dos UNDI is much more stable than pxegrub with ten different nic drivers compiled in. The only thing holding us back on using pxelinux for all of our tftp images is the lack of a menu system. We are very close to buying a proprietary software but, I would much rather use an open source type solution. It...

O.K Here we go: 8-) Pxelinux 4.10 4.10-pre22 Copyright ..... !PXE entry point found (we hope) at 9073:00F6 via plan A UNDI code segment at 9073 len 216A UNDI data segment at 9059 len 01A0 UNDI: baseio ec00 int 11 MTU 1500 type 1 "DIX+802.3" flags 0x81b Getting cached Packet 01 02 03 MY IP addr seems to be 172.31.126.10 UNDI : IRQ11(0x73):0a63:4f9b -> 0000:8de2 Mac: Addr: 80 ee 73 18 73 f0 Hope there are...

I am using memdisk to remotely flash the BIOS and other firmware. It works well for most flash programs. After the flash I need to initialize the NIC to send a signal to my management server that the flash is complete. I am curious as to how others have solved this problem. Thanks.

Hello, I'm still trying to setup RIS (Remote Installation Service -w2k) with PXE Linux, but before that I must say that the mail list archive is a _good_ idea. Back to RIS. When I start from pxelinux memdisk initrd=risbootdisk.img I get an error: No UNDI Driver found. The risbootdisk.img is a bootdisk from Microsoft, which starts a RIS installation. When I boot from floppy it works fine, when I load the image over network, I get this error. Is it possible to have a memdisk load in pxelinux with the PXE and UNDI stack in memory? I'm not sure,...

I have an image of a dos floppy that loads the undi driver from 3com and mounts an smb share. This works great with pxelinux(from syslinux) and memdisk I need to make it work with pxegrub so we can use menus. (or figure out a menu system for pxelinux) With pxegrub I use memdisk as the kernel and load the dos image as a ramdisk. The undi driver lo...

Hi I use this setup with PXELINUX. label Ghost1 menu label Ghost v11 (uni net 192.168.150.10) kernel memdisk append keeppxe initrd=img/gh1.zip floppy vga=1 The sw keeppxe I use to prevent destroy the pxe UNDI net driver. The problem is similar when using ISOLINUX with the same UNDI net driver, the driver fail to load!!! The same will happened if I don't use the sw keeppxe on PXELINUX. Is there a sw or anything else I can use on ISOLINUX??? Regards Flemming

Good day, I have the problem to pass the ?loaded? undi driver to the next bootloader. In current pxelinux ?lernel memdisk keeppxe harddisk raw initrd::parh_to_img? always unloads undi before memdisk (or other kernel) takes control. After many tries I found that the keeppxe feature is broken starting from version 6.03 pre 9. I tried to find the reas...

Hi I'm having problems PXE-booting a Sun-Blade 100x. As the subject line says, booting stops during "Loading /bzimage...." Broadcom UNDI PXE-2.1 (build 082) v6.2.11 Copyright (C) 2000-2003 Broadcom Corporation Copyright (C) 1997-2000 Intel Corporation All rights reserved. CLIENT MAC ADDR: 00 03 BA 44 4F F4 GUID: 00000000 0000 0000 0000 000000000000 CLIENT IP: 10.148.11.21 MASK: 255.255.255.0 DHCP IP: 10.148.11.106 PXELINUX 2.06...

The following changes since commit 6438fbcb6cb7e0cd40e4bb3681ada047fe77ffdd: Gene Cumm (1): Allow for UNDIIF_ID_DEBUG in 1 mk line are available in the git repository at: git://github.com/geneC/syslinux.git elflink-undi-thread-for-mfleming Gene Cumm (3): core/lwip/undi: Improve UNDIIF_ID_DEBUG messages core: mbox/semaphore NULL checks core: make mbox_post()/__sem_down_slow() check...

...pyright (c) 2000-2005 Broadcom Corporation Copyright (c) 1997-2000 Intel CLIENT MAC ADDR: 00188BF9DA55 GUID:44454C4C 5400 1048 8054 B8C04F344431 CLIENT IP: 192.168.0.254 MASK:255.255.255.0 DHCP IP:192.168.0.2 GATEWAY IP: 192.168.0.1 PXELINUX 3.11 2005-09-02 Copyright (c) 1994-2005 H. Peter Anvin UNDI data segment at 00094EA0 UNDI data segment size:3AE0 UNDI data segment at 00098980 UNDI data segment size: 60F8 PXE entry point found (we hope) at 9898:00DA My IP address seems to be C0A800FE 192.168.0.254 ip=192.168.0.254;0.0.0.0:192.168.0.1:255.255.255.0 TFTP prefix: Trying to load: pxelinux.cfg/...