Hi I have a Supermicro PDSGE with an AMI BIOS, I have UFS boot disk connected via IDE and a ZFS pool comprising 4 x 400GB entire disks on the SATA ports. After I created the ZFS pool the BIOS freezes after the SATA disks are detected, this is because the EFI label is not recognised by the BIOS, removing the disks allows the system to boot. Is there a workaround that I can use, I read you could set the SATA devices in the BIOS to "None", will Solaris still see the disks if I do this? I would like to be able to boot and have a ZFS pool using the entire disks. I have emailed Supermicro for help also. Thanks for your time. Kind Regards Richard This message posted from opensolaris.org