Being resilvered 444.00 GB 168.21 GB 158.73 GB Just wondering if anyone has any rough guesstimate of how long this will take? It''s 3x1200JB ata drives and one Seagate SATA drive. The SATA drive is the one that was replaced. Any idea how long this will take? As in 5 hours? 2 days? I don''t see any way to get a status update on where it''s at in the reslivering process (feature request?). This message posted from opensolaris.org
On Fri, Sep 15, 2006 at 12:43:19PM -0700, Tim Cook wrote:> Being resilvered 444.00 GB 168.21 GB 158.73 GB > > Just wondering if anyone has any rough guesstimate of how long this > will take? It''s 3x1200JB ata drives and one Seagate SATA drive. The > SATA drive is the one that was replaced. Any idea how long this will > take? As in 5 hours? 2 days? I don''t see any way to get a status > update on where it''s at in the reslivering process (feature request?).How long it takes depends on many factors. You will get a *very* rough estimate and progress report by running "zpool status <pool>". Did you try that? --Bill
the status showed 19.46% the first time I ran it, then 9.46% the second. The question I have is I added the new disk, but it''s showing the following: Device: c5d0 Storage Pool: fserv Type: Disk Device State: Faulted (cannot open) The disk is currently unpartitioned and unformatted. I was under the impression ZFS was going to take care of all of that. Do I need to setup partitioning and formatting before trying to add it to a pool? This message posted from opensolaris.org
On Fri, Sep 15, 2006 at 01:10:25PM -0700, Tim Cook wrote:> the status showed 19.46% the first time I ran it, then 9.46% the > second. The question I have is I added the new disk, but it''s showing > the following: > > Device: c5d0 > Storage Pool: fserv > Type: Disk > Device State: Faulted (cannot open)Did you run "zpool replace fserv c5d0"? We''re working on the auto-replace when we detect a hot-plug, but it''s not in yet.> The disk is currently unpartitioned and unformatted. I was under the > impression ZFS was going to take care of all of that. Do I need to > setup partitioning and formatting before trying to add it to a pool?ZFS should take care of all that. --Bill
hrmm... "cannot replace c5d0 with c5d0: cannot replace a replacing device" This message posted from opensolaris.org
says it''s online now so I can only assume it''s working. Doesn''t seem to be reading from any of the other disks in the array though. Can it sliver without traffic to any other disks? /noob This message posted from opensolaris.org
On Fri, Sep 15, 2006 at 01:26:21PM -0700, Tim Cook wrote:> says it''s online now so I can only assume it''s working. Doesn''t seem > to be reading from any of the other disks in the array though. Can it > sliver without traffic to any other disks? /noobCan you send the output of "zpool status -v <pool>"? --Bill
Yes sir:
[@fservsol11b46]:/
# zpool status -v fserv
pool: fserv
state: DEGRADED
status: One or more devices is currently being resilvered. The pool
will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scrub: resilver in progress, 5.90% done, 27h13m to go
config:
NAME STATE READ WRITE CKSUM
fserv DEGRADED 0 0 0
raidz1 DEGRADED 0 0 0
replacing DEGRADED 0 0 0
c5d0s0/o UNAVAIL 0 0 0 cannot open
c5d0 ONLINE 0 0 0
c3d0 ONLINE 0 0 0
c3d1 ONLINE 0 0 0
c4d0 ONLINE 0 0 0
errors: No known data errors
-----Original Message-----
From: Bill Moore [mailto:Bill.Moore at sun.com]
Sent: Friday, September 15, 2006 4:45 PM
To: Tim Cook
Cc: zfs-discuss at opensolaris.org
Subject: Re: [zfs-discuss] Re: reslivering, how long will it take?
On Fri, Sep 15, 2006 at 01:26:21PM -0700, Tim Cook
wrote:> says it''s online now so I can only assume it''s working.
Doesn''t seem
> to be reading from any of the other disks in the array though. Can it
> sliver without traffic to any other disks? /noob
Can you send the output of "zpool status -v <pool>"?
--Bill
Yes sir: [@fservsol11b46]:/ # zpool status -v fserv pool: fserv state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scrub: resilver in progress, 5.90% done, 27h13m to go config: NAME STATE READ WRITE CKSUM fserv DEGRADED 0 0 0 raidz1 DEGRADED 0 0 0 replacing DEGRADED 0 0 0 c5d0s0/o UNAVAIL 0 0 0 cannot open c5d0 ONLINE 0 0 0 c3d0 ONLINE 0 0 0 c3d1 ONLINE 0 0 0 c4d0 ONLINE 0 0 0 errors: No known data errors -----Original Message----- From: Bill Moore [mailto:Bill dot Moore at sun dot com] Sent: Friday, September 15, 2006 4:45 PM To: Tim Cook Cc: zfs-discuss at opensolaris dot org Subject: Re: [zfs-discuss] Re: reslivering, how long will it take? On Fri, Sep 15, 2006 at 01:26:21PM -0700, Tim Cook wrote:> says it''s online now so I can only assume it''s working. Doesn''t seem > to be reading from any of the other disks in the array though. Can it > sliver without traffic to any other disks? /noobCan you send the output of "zpool status -v <pool>"? --Bill ___________________________________________ ____ zfs-discuss mailing list zfs-discuss at opensolaris dot org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss This message posted from opensolaris.org