Caz Yokoyama
2010-Dec-16 05:49 UTC
[Xen-users] dom0 does not boot when VT-d is enabled on ASRock X58 Extreme
Hello,
Has anyone found dom0 does not boot when VT-d is enabled on ASRock X58
Extreme? I am running SLES 11.1 which has X4.0.0_21091_04-0 .2.6.and kernel
2.6.32.12-0.7-xen. Xen does not boot when VT-d is enabled as following
table. Other combinations are fine. For example, dom0 kernel,
vmlinuz-2.6.32.12-0.7-default boot fine even when VT-d is enabled.
VT-d xen boot
Enb yes no
Dis yes yes
Enb no yes
Has anyone else had this symptom? Here is console log.
__ __
\ \/ /___ _ __
\ // _ \ ''_ \
/ \ __/ | | |
/_/\_\___|_| |_|
_ _ ___ ___ ____ _ ___ ___ _ ___ _ _ ___ ____
| || | / _ \ / _ \ |___ \/ |/ _ \ / _ \/ | / _ \| || | / _ \ |___
\
| || |_| | | | | | | __) | | | | | (_) | | | | | | || |_ __| | | | __)
|
|__ _| |_| | |_| | / __/| | |_| |\__, | | | |_| |__ _|__| |_| | /
__/ _
|_|(_)___(_)___/___|_____|_|\___/ /_/|_|___\___/ |_|
\___(_)_____(_)
|_____| |_____|
__
/ /_
| ''_ \
| (_) |
\___/
(XEN) Xen version 4.0.0_21091_04-0.2.6 (abuild@) (gcc version 4.3.4
[gcc-4_3-branch revision 152973] (SUSE Linux) ) Thu May 20 11:44:41 UTC 2010
(XEN) Latest ChangeSet: 21091
(XEN) Command line: vga=mode-0x375 com1=115200,8n1 console=vga,com1L
gdb=com1H
(XEN) Video information:
(XEN) VGA is graphics mode 1600x1200, 16 bpp
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) EDID info not retrieved because of reasons unknown
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN0000000000a0000 (reserved)
(XEN) 00000000000e4000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bbe80000 (usable)
(XEN) 00000000bbe80000 - 00000000bbe90000 (ACPI data)
(XEN) 00000000bbe90000 - 00000000bbed0000 (ACPI NVS)
(XEN) 00000000bbed0000 - 00000000bbee0000 (reserved)
(XEN) 00000000bbeeb800 - 00000000bc000000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 00000001c4000000 (usable)
(XEN) ACPI: RSDP 000FA1F0, 0014 (r0 ACPIAM)
(XEN) ACPI: RSDT BBE80000, 0044 (r1 111510 RSDT1542 20101115 MSFT 97)
(XEN) ACPI: FACP BBE80200, 0084 (r1 A_M_I OEMFACP 12000601 MSFT 97)
(XEN) ACPI: DSDT BBE80480, 7129 (r1 AS244 AS244263 263 INTL 20051117)
(XEN) ACPI: FACS BBE90000, 0040
(XEN) ACPI: APIC BBE80390, 00AC (r1 111510 APIC1542 20101115 MSFT 97)
(XEN) ACPI: MCFG BBE80440, 003C (r1 111510 OEMMCFG 20101115 MSFT 97)
(XEN) ACPI: OEMB BBE90040, 0073 (r1 111510 OEMB1542 20101115 MSFT 97)
(XEN) ACPI: AAFT BBE8A480, 0027 (r1 111510 OEMAAFT 20101115 MSFT 97)
(XEN) ACPI: HPET BBE8A4B0, 0038 (r1 111510 OEMHPET 20101115 MSFT 97)
(XEN) ACPI: DMAR BBE900C0, 0130 (r1 AMI OEMDMAR 1 MSFT 97)
(XEN) ACPI: SSDT BBE92430, 0363 (r1 DpgPmm CpuPm 12 INTL 20051117)
(XEN) System RAM: 6112MB (6259636kB)
(XEN) Domain heap initialised
(XEN) Processor #0 7:10 APIC version 21
(XEN) Processor #2 7:10 APIC version 21
(XEN) Processor #4 7:10 APIC version 21
(XEN) Processor #6 7:10 APIC version 21
(XEN) Processor #1 7:10 APIC version 21
(XEN) Processor #3 7:10 APIC version 21
(XEN) Processor #5 7:10 APIC version 21
(XEN) Processor #7 7:10 APIC version 21
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) [VT-D]dmar.c:504: RMRR address range not in reserved memory base
bbeeb800 end = bbefffff; iommu_inclusive_mapping=1 parameter may be needed.
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3135.481 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel VT-d Snoop Control supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping supported.
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) TSC is reliable, synchronization unnecessary
(XEN) Platform timer is 14.318MHz HPET
ΓΏ(XEN) Allocated console ring of 16 KiB.
(XEN) Brought up 8 CPUs
(XEN) Created cpupool 0 with scheduler SMP Credit Scheduler (credit)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0x2000 -> 0x765000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000013c000000->000000013e000000 (1507875 pages to
be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80002000->ffffffff80765000
(XEN) Init. ramdisk: ffffffff80765000->ffffffff815b4c00
(XEN) Phys-Mach map: ffffea0000000000->ffffea0000b91118
(XEN) Start info: ffffffff815b5000->ffffffff815b54b4
(XEN) Page tables: ffffffff815b6000->ffffffff815c5000
(XEN) Boot stack: ffffffff815c5000->ffffffff815c6000
(XEN) TOTAL: ffffffff80000000->ffffffff81800000
(XEN) ENTRY ADDRESS: ffffffff80002000
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times
to switch input to
Xen)
(XEN) Freed 184kB init memory.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.12-0.7-xen (geeko@buildhost) (gcc
version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP
2010-05-20 11:14:20 +0200
[ 0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 vga=0x375
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 1.524364] Xen-provided machine memory map:
[ 1.524366] BIOS: 0000000000000000 - 0000000000097800 (usable)
[ 1.524368] BIOS: 0000000000097800 - 00000000000a0000 (reserved)
[ 1.524369] BIOS: 00000000000e4000 - 0000000000100000 (reserved)
[ 1.524370] BIOS: 0000000000100000 - 00000000bbe80000 (usable)
[ 1.524371] BIOS: 00000000bbe80000 - 00000000bbe90000 (ACPI data)
[ 1.524373] BIOS: 00000000bbe90000 - 00000000bbed0000 (ACPI NVS)
[ 1.524374] BIOS: 00000000bbed0000 - 00000000bbee0000 (reserved)
[ 1.524375] BIOS: 00000000bbeeb800 - 00000000bc000000 (reserved)
[ 1.524376] BIOS: 00000000fec00000 - 00000000fec01000 (reserved)
[ 1.524378] BIOS: 00000000fee00000 - 00000000fee01000 (reserved)
[ 1.524379] BIOS: 00000000ffb00000 - 0000000100000000 (reserved)
[ 1.524380] BIOS: 0000000100000000 - 00000001c4000000 (usable)
[ 1.524381] Xen-provided physical RAM map:
[ 1.524382] Xen: 0000000000000000 - 0000000172a23000 (usable)
[ 1.524472] DMI present.
[ 1.524481] last_pfn = 0x172a23 max_arch_pfn = 0x80000000
[ 1.524482] last_pfn = 0x100000 max_arch_pfn = 0x80000000
[ 1.524484] init_memory_mapping: 0000000000000000-0000000100000000
[ 1.648782] init_memory_mapping: 0000000100000000-0000000172a23000
[ 1.703563] RAMDISK: 00765000 - 015b4c00
[ 1.703601] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
[ 1.703608] ACPI: RSDT 00000000bbe80000 00044 (v01 111510 RSDT1542
20101115 MSFT 00000097)
[ 1.703613] ACPI: FACP 00000000bbe80200 00084 (v01 A_M_I OEMFACP
12000601 MSFT 00000097)
[ 1.703619] ACPI: DSDT 00000000bbe80480 07129 (v01 AS244 AS244263
00000263 INTL 20051117)
[ 1.703623] ACPI: FACS 00000000bbe90000 00040
[ 1.703625] ACPI: APIC 00000000bbe80390 000AC (v01 111510 APIC1542
20101115 MSFT 00000097)
[ 1.703629] ACPI: MCFG 00000000bbe80440 0003C (v01 111510 OEMMCFG
20101115 MSFT 00000097)
[ 1.703632] ACPI: OEMB 00000000bbe90040 00073 (v01 111510 OEMB1542
20101115 MSFT 00000097)
[ 1.703635] ACPI: AAFT 00000000bbe8a480 00027 (v01 111510 OEMAAFT
20101115 MSFT 00000097)
[ 1.703639] ACPI: HPET 00000000bbe8a4b0 00038 (v01 111510 OEMHPET
20101115 MSFT 00000097)
[ 1.703642] ACPI: 00000000bbe900c0 00130 (v01 AMI OEMDMAR
00000001 MSFT 00000097)
[ 1.703645] ACPI: SSDT 00000000bbe92430 00363 (v01 DpgPmm CpuPm
00000012 INTL 20051117)
[ 1.712410] (7 early reservations) ==> bootmem [0000000000 - 0172223000]
[ 1.712411] #0 [0000765000 - 00015c5000] Xen provided ==>
[0000765000 - 00015c5000]
[ 1.712434] #1 [0000002000 - 00007448a8] TEXT DATA BSS ==>
[0000002000 - 00007448a8]
[ 1.712446] #2 [0002000000 - 0002b95000] INITP2M ==>
[0002000000 - 0002b95000]
[ 1.712465] #3 [0000745000 - 000074512f] BRK ==>
[0000745000 - 000074512f]
[ 1.712466] #4 [00015c5000 - 0001dca000] PGTABLE ==>
[00015c5000 - 0001dca000]
[ 1.712480] #5 [0001dca000 - 0002000000] PGTABLE ==>
[0001dca000 - 0002000000]
[ 1.712485] #6 [0002b95000 - 0002cf7000] PGTABLE ==>
[0002b95000 - 0002cf7000]
[ 1.716456] Zone PFN ranges:
[ 1.716457] DMA 0x00000000 -> 0x00001000
[ 1.716458] DMA32 0x00001000 -> 0x00100000
[ 1.716459] Normal 0x00100000 -> 0x00172a23
[ 1.716460] Movable zone start PFN for each node
[ 1.716461] early_node_map[2] active PFN ranges
[ 1.716462] 0: 0x00000000 -> 0x00172223
[ 1.716462] 0: 0x00172a23 -> 0x00172a23
[ 1.745056] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 1.745058] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 1.745059] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 1.745060] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 1.745061] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 1.745062] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 1.745063] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 1.745064] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 1.745065] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] died)
[ 1.745065] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 1.745066] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 1.745067] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 1.745073] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 1.745078] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
0-23
[ 1.745081] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 1.745082] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 1.745090] Using ACPI (MADT) for SMP configuration information
[ 1.745123] Allocating PCI resources starting at bc000000 (gap:
bc000000:42c00000)
[ 1.745125] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 1.745205] PERCPU: Embedded 17 pages/cpu @ffff88000200a000 s40856 r8192
d20584 u69632
[ 1.745209] pcpu-alloc: s40856 r8192 d20584 u69632 alloc=17*4096
[ 1.745210] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 1.745221] Swapping MFNs for PFN 635 and 2010 (MFN 13c635 and 13e40e)
[ 1.745234] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1495311
[ 1.745236] Kernel command line: root=/dev/sda2 resume=/dev/sda1
vga=0x375
[ 1.745250] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.746020] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 1.747448] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 1.759427] allocated 60724600 bytes of page_cgroup
[ 1.759429] please try ''cgroup_disable=memory'' option if
you don''t want
memory cgroups
[ 1.778241] Software IO TLB enabled:
[ 1.778241] Aperture: 64 megabytes
[ 1.778242] Address size: 27 bits
[ 1.778242] Kernel range: ffff88000c7e8000 - ffff8800107e8000
[ 1.778244] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.791060] Memory: 5796228k/6072460k available (3424k kernel code, 8192k
absent, 267288k reserved, 2892k data, 340k init)
[ 1.791123] Hierarchical RCU implementation.
[ 1.791129] NR_IRQS:6464 nr_irqs:2584
[ 1.791202] Xen reported: 3135.480 MHz processor.
[ 0.267032] Console: colour dummy device 80x25
[ 0.267118] console [tty0] enabled
[ 0.267295] console [xvc-1] enabled
[ 0.334997] Calibrating delay using timer specific routine.. 6272.63
BogoMIPS (lpj=12545272)
[ 0.335002] pid_max: default: 32768 minimum: 301
[ 0.335036] Security Framework initialized
[ 0.335047] AppArmor: AppArmor initialized
[ 0.335062] Mount-cache hash table entries: 256
[ 0.335148] Initializing cgroup subsys ns
[ 0.335152] Initializing cgroup subsys cpuacct
[ 0.335155] Initializing cgroup subsys memory
[ 0.335160] Initializing cgroup subsys devices
[ 0.335162] Initializing cgroup subsys freezer
[ 0.335164] Initializing cgroup subsys net_cls
[ 0.335190] mce: CPU supports 9 MCE banks
[ 0.335211] SMP alternatives: switching to UP code
[ 0.347723] ACPI: Core revision 20090903
[ 0.376228] SMP alternatives: switching to SMP code
[ 0.389028] Brought up 8 CPUs
[ 0.389257] devtmpfs: initialized
[ 0.389472] regulator: core version 0.5
[ 0.389502] Time: 5:32:58 Date: 12/16/10
[ 0.389559] NET: Registered protocol family 16
[ 0.389685] ACPI: bus type pci registered
[ 0.389731] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
[ 0.389735] PCI: Not using MMCONFIG.
[ 0.389737] PCI: Using configuration type 1 for base access
[ 0.390221] bio: create slab <bio-0> at 0
[ 0.394411] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.399782] ACPI: Interpreter enabled
[ 0.399787] ACPI: (supports S0 S1 S5)
[ 0.399800] ACPI: Using IOAPIC for interrupt routing
[ 0.399841] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
[ 0.404799] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.497155] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.505128] ACPI Warning: Incorrect checksum in table [OEMB] - CF, should
be CE (20090903/tbutils-314)
[ 0.505166] ACPI Warning: Incorrect checksum in table [ ] - 3B, should
be 7F (20090903/tbutils-314)
[ 0.505267] ACPI: No dock devices found.
[ 0.505270] PCI: Ignoring host bridge windows from ACPI; if necessary,
use "pci=use_crs" and report a bug
[ 0.505383] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.505475] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.505481] pci 0000:00:00.0: PME# disabled
[ 0.505576] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.505580] pci 0000:00:01.0: PME# disabled
[ 0.505677] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.505682] pci 0000:00:03.0: PME# disabled
[ 0.505781] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.505786] pci 0000:00:07.0: PME# disabled
[ 0.506527] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.506533] pci 0000:00:1a.7: PME# disabled
[ 0.506646] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.506652] pci 0000:00:1b.0: PME# disabled
[ 0.506739] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.506744] pci 0000:00:1c.0: PME# disabled
[ 0.506834] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.506839] pci 0000:00:1c.1: PME# disabled
[ 0.506933] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.506938] pci 0000:00:1c.5: PME# disabled
[ 0.507373] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.507379] pci 0000:00:1d.7: PME# disabled
[ 0.507573] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
[ 0.507578] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6
GPIO
[ 0.507582] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00
(mask 00ff)
[ 0.507589] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700
(mask 001f)
[ 0.507951] pci 0000:00:01.0: PCI bridge to [bus 07-07]
[ 0.517523] pci 0000:00:03.0: PCI bridge to [bus 05-05]
[ 0.517664] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with ''pcie_aspm=force''
[ 0.517730] pci 0000:00:07.0: PCI bridge to [bus 06-06]
[ 0.517907] pci 0000:03:00.0: PME# supported from D3hot
[ 0.517914] pci 0000:03:00.0: PME# disabled
[ 0.517945] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with ''pcie_aspm=force''
[ 0.518025] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.518186] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[ 0.518193] pci 0000:02:00.0: PME# disabled
[ 0.518361] pci 0000:02:00.1: PME# supported from D2 D3hot D3cold
[ 0.518367] pci 0000:02:00.1: PME# disabled
[ 0.525585] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.525758] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.525764] pci 0000:01:00.0: PME# disabled
[ 0.533546] pci 0000:00:1c.5: PCI bridge to [bus 01-01]
[ 0.533622] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive
decode)
[ 0.540870] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14
15)
[ 0.540965] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.541054] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14
*15)
[ 0.541146] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14
15)
[ 0.541238] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15)
*0, disabled.
[ 0.541331] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14
15)
[ 0.541427] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14
15)
[ 0.541520] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14
15)
[ 0.541575] xen_mem: Initialising balloon driver.
[ 0.541650] vgaarb: device added:
PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.541657] vgaarb: device added:
PCI:0000:06:00.0,decodes=io+mem,owns=none,locks=none
[ 0.541661] vgaarb: loaded
[ 0.541704] PCI: Using ACPI for IRQ routing
[ 0.541858] NetLabel: Initializing
[ 0.541861] NetLabel: domain hash size = 128
[ 0.541862] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.541872] NetLabel: unlabeled traffic allowed by default
[ 0.541883] Switching to clocksource xen
[ 0.153167] AppArmor: AppArmor Filesystem Enabled
[ 0.153176] pnp: PnP ACPI init
[ 0.153183] ACPI: bus type pnp registered
[ 0.156886] pnp: PnP ACPI: found 15 devices
[ 0.156890] ACPI: ACPI bus type pnp unregistered
[ 0.156897] system 00:01: iomem range 0xfbf00000-0xfbffffff has been
reserved
[ 0.156900] system 00:01: iomem range 0xfc000000-0xfcffffff has been
reserved
[ 0.156903] system 00:01: iomem range 0xfd000000-0xfdffffff has been
reserved
[ 0.156906] system 00:01: iomem range 0xfe000000-0xfebfffff has been
reserved
[ 0.156908] system 00:01: iomem range 0xfec8a000-0xfec8afff has been
reserved
[ 0.156911] system 00:01: iomem range 0xfed10000-0xfed10fff has been
reserved
[ 0.156917] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.156919] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.156922] system 00:06: ioport range 0x500-0x57f could not be reserved
[ 0.156925] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.156928] system 00:06: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.156931] system 00:06: iomem range 0xfed40000-0xfed8ffff has been
reserved
[ 0.156935] system 00:09: iomem range 0xffc00000-0xffefffff has been
reserved
[ 0.156939] system 00:0a: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 0.156942] system 00:0a: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.156945] system 00:0a: iomem range 0xfec8a000-0xfec8afff has been
reserved
[ 0.156949] system 00:0c: ioport range 0xa00-0xa0f has been reserved
[ 0.156952] system 00:0c: ioport range 0xa10-0xa1f has been reserved
[ 0.156954] system 00:0c: ioport range 0xa20-0xa2f has been reserved
[ 0.156957] system 00:0c: ioport range 0xa30-0xa3f has been reserved
[ 0.156961] system 00:0d: iomem range 0xe0000000-0xefffffff has been
reserved
[ 0.156965] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.156968] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.156971] system 00:0e: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.156973] system 00:0e: iomem range 0x100000-0xbbffffff could not be
reserved
[ 0.156977] system 00:0e: iomem range 0xfed90000-0xffffffff could not be
reserved
[ 0.157137] pci 0000:00:01.0: PCI bridge, secondary bus 0000:07
[ 0.157141] pci 0000:00:01.0: IO window: disabled
[ 0.157146] pci 0000:00:01.0: MEM window: disabled
[ 0.157150] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.157158] pci 0000:00:03.0: PCI bridge, secondary bus 0000:05
[ 0.157162] pci 0000:00:03.0: IO window: 0xe000-0xefff
[ 0.157167] pci 0000:00:03.0: MEM window: 0xf8f00000-0xf8ffffff
[ 0.157172] pci 0000:00:03.0: PREFETCH window:
0x000000c0000000-0x000000cfffffff
[ 0.157180] pci 0000:00:07.0: PCI bridge, secondary bus 0000:06
[ 0.157182] pci 0000:00:07.0: IO window: disabled
[ 0.157188] pci 0000:00:07.0: MEM window: 0xf9000000-0xfbefffff
[ 0.157192] pci 0000:00:07.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.157200] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.157204] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.157210] pci 0000:000: MEM window: 0xf8e00000-0xf8efffff
[ 0.157215] pci 0000:00:1c.0: PREFETCH window:
0x000000bc000000-0x000000bc1fffff
[ 0.157224] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.157256] pci 0000:00:1c.1: IO window: 0xc000-0xcfff
[ 0.157262] pci 0000:00:1c.1: MEM window: 0xf8d00000-0xf8dfffff
[ 0.157267] pci 0000:00:1c.1: PREFETCH window:
0x000000bc200000-0x000000bc3fffff
[ 0.157276] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:01
[ 0.157279] pci 0000:00:1c.5: IO window: 0xb000-0xbfff
[ 0.157286] pci 0000:00:1c.5: MEM window: 0xf8c00000-0xf8cfffff
[ 0.157291] pci 0000:00:1c.5: PREFETCH window:
0x000000bff00000-0x000000bfffffff
[ 0.157299] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.157301] pci 0000:00:1e.0: IO window: disabled
[ 0.157307] pci 0000:00:1e.0: MEM window: disabled
[ 0.157312] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.157385] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ
17
[ 0.157424] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ
16
[ 0.157438] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ
16
[ 0.157541] NET: Registered protocol family 2
[ 0.157608] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.157931] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.158367] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.158468] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.158471] TCP reno registered
[ 0.158554] NET: Registered protocol family 1
[ 0.158988] Unpacking initramfs...
[ 0.164955] Freeing initrd memory: 14655k freed
[ 0.166882] audit: initializing netlink socket (disabled)
[ 0.166894] type=2000 audit(1292477579.075:1): initialized
[ 0.171900] VFS: Disk quotas dquot_6.5.2
[ 0.171928] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.171969] msgmni has been set to 2968
[ 0.172374] alg: No test for stdrng (krng)
[ 0.172201] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 254)
[ 0.172205] io scheduler noop registered
[ 0.172207] io scheduler anticipatory registered
[ 0.172209] io scheduler deadline registered
[ 0.172231] io scheduler cfq registered (default)
[ 0.173336] pci-stub: invalid id string ""
[ 0.176012] vesafb: framebuffer at 0xc0000000, mapped to
0xffffc90010100000, using 7500k, total 16384k
[ 0.176016] vesafb: mode is 1600x1200x16, linelength=3200, pages=0
[ 0.176019] vesafb: scrolling: redraw
[ 0.176021] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.176089] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.176090] bootsplash: silentjpeg size 79881 bytes
[ 0.192506] bootsplash: ...found (1600x1200, 42941 bytes, v3).
[ 0.315561] Console: switching to colour frame buffer device 196x71
[ 0.422561] fb0: VESA VGA frame buffer device
[ 0.423486] Non-volatile memory driver v1.3
[ 0.423874] Xen virtual console successfully installed as xvc0
[ 0.424362] Event-channel device installed.
[ 0.424722] Fixed MDIO Bus: probed
[ 0.425027] PNP: No PS/2 controller found. Probing ports directly.
[ 0.814970] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.815381] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.815837] mice: PS/2 mouse device common for all mice
[ 0.816495] TCP cubic registered
[ 0.816808] registered taskstats version 1
[ 0.817820] PCI IO multiplexer device installed.
[ 0.818224] Magic number: 6:245:517
[ 0.818642] Freeing unused kernel memory: 340k freed
[ 0.819104] Write protecting the kernel read-only data: 5716k
[ 0.485651] SCSI subsystem initialized
[ 0.495508] pata_via 0000:02:00.1: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 0.496251] scsi0 : pata_via
[ 0.496564] scsi1 : pata_via
[ 0.496963] ata1: PATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400
irq 17
[ 0.497550] ata2: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408
irq 17
[ 1.049741] ata1.00: ATAPI: PIONEER DVD-RW DVR-112D, 1.15, max UDMA/66
[ 1.050294] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.065764] ata1.00: configured for UDMA/33
[ 1.078374] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-112D
1.15 PQ: 0 ANSI: 5
[ 0.854708] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 0.868497] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1
impl SATA mode
[ 0.869172] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum
part
[ 0.869891] scsi2 : ahci
[ 0.870136] ata3: SATA max UDMA/133 abar m8192@0xf8efe000 port 0xf8efe100
irq 16
[ 1.188477] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.207211] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 1.207802] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.208418] scsi3 : ata_piix
[ 1.208704] scsi4 : ata_piix
[ 1.209762] ata4: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400
irq 19
[ 1.210352] ata5: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408
irq 19
[ 1.210961] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 1.211552] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.212122] scsi5 : ata_piix
[ 1.212402] scsi6 : ata_piix
[ 1.213349] ata6: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400
irq 19
[ 1.213938] ata7: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408
irq 19
[ 1.547566] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.558535] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.248254] ata5.00: SATA link down (SStatus 0 SControl 300)
[ 2.264873] ata5.01: SATA link down (SStatus 0 SControl 300)
[ 2.028522] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.045557] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 2.504060] ata4.00: ATA-7: MAXTOR STM3320620AS, 3.AAE, max UDMA/133
[ 2.521739] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.585894] ata4.00: configured for UDMA/133
[ 2.604188] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM332062
3.AA PQ: 0 ANSI: 5
[ 2.256690] Uniform Multi-Platform E-IDE driver
[ 2.283790] ACPI: SSDT 00000000bbe901f0 0223C (v01 DpgPmm P001Ist
00000011 INTL 20051117)
[ 2.304508] No available Cx info for cpu 2
[ 2.325068] No available Cx info for cpu 3
[ 2.345538] N
[ 2.366014] No available Cx info for cpu 5
[ 2.386534] No available Cx info for cpu 6
[ 2.407086] No available Cx info for cpu 7
[ 2.427684] No available Cx info for cpu 8
[ 2.448309] No available Cx info for cpu 9
[ 2.468733] No available Cx info for cpu 10
[ 2.489207] No available Cx info for cpu 11
[ 2.509724] No available Cx info for cpu 12
[ 2.530282] No available Cx info for cpu 13
[ 2.550885] No available Cx info for cpu 14
[ 2.571514] No available Cx info for cpu 15
[ 2.591779] No available Cx info for cpu 16
[ 2.641029] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 2.671015] netfront: Initialising virtual ethernet driver.
[ 2.722080] udevd version 128 started
[ 3.209708] usbcore: registered new interface driver usbfs
[ 2.833610] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320
GB/298 GiB)
[ 2.833648] sd 3:0:0:0: [sda] Write Protect is off
[ 2.833667] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn''t support DPO or FUA
[ 2.833765] sda: sda1
[ 3.294089] usbcore: registered new interface driver hub
[ 2.905522] usbcore: registered new device driver usb
[ 2.906369] ehci_hcd: USB 2.0 ''Enhanced'' Host Controller
(EHCI) Driver
[ 2.906425] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 2.906452] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.906467] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 2.906508] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.910363] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8bf6000
[ 2.924276] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.924289] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.924291] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.924292] usb usb1: Product: EHCI Host Controller
[ 2.924292] usb usb1: Manufacturer: Linux 2.6.32.12-0.7-xen ehci_hcd
[ 2.924293] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.924335] usb usb1: configuration #1 chosen from 1 choice
[ 2.924350] hub 1-0:1.0: USB hub found
[ 2.924362] hub 1-0:1.0: 6 ports detected
[ 2.924431] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 2.924453] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.924458] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 2.924494] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.928356] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8bfc000
[ 2.940274] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.940286] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.940287] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.940288] usb usb2: Product: EHCI Host Controller
[ 2.940289] usb usb2: Manufacturer: Linux 2.6.32.12-0.7-xen ehci_hcd
[ 2.940290] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.940325] usb usb2: configuration #1 chosen from 1 choice
[ 2.940338] hub 2-0:1.0: USB hub found
[ 2.940350] hub 2-0:1.0: 6 ports detected
[ 3.034576] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.586987] sda2
[ 3.587598] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 3.587608] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.587615] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 3.587641] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008400
[ 3.587708] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.587709] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.587710] usb usb3: Product: UHCI Host Controller
[ 3.587711] usb usb3: Manufacturer: Linux 2.6.32.12-0.7-xen uhci_hcd
[ 3.587712] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.587751] usb usb3: configuration #1 chosen from 1 choice
[ 3.587766] hub 3-0:1.0: USB hub found
[ 3.587774] hub 3-0:1.0: 2 ports detected
[ 3.587840] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) ->
IRQ 21
[ 3.587848] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.587853] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 3.587923] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008480
[ 3.587957] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.587958] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.587960] usb usb4: Product: UHCI Host Controller
[ 3.587961] usb usb4: Manufacturer: Linux 2.6.32.12-0.7-xen uhci_hcd
[ 3.587961] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.587998] usb usb4: configuration #1 chosen from 1 choice
[ 3.588015] hub 4-0:1.0: USB hub found
[ 3.588024] hub 4-0:1.0: 2 ports detected
[ 3.588061] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) ->
IRQ 19
[ 3.588068] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.588074] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 5
[ 3.588099] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008800
[ 3.588133] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.588134] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.588135] usb usb5: Product: UHCI Host Controller
[ 3.588136] usb usb5: Manufacturer: Linux 2.6.32.12-0.7-xen uhci_hcd
[ 3.588137] usb usb5: SerialNumber: 0000:00:1a.2
[ 3.588172] usb usb5: configuration #1 chosen from 1 choice
[ 3.588185] hub 5-0:1.0: USB hub found
[ 3.588193] hub 5-0:1.0: 2 ports detected
[ 3.588228] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 3.588235] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.588241] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 6
[ 3.588266] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008880
[ 3.588301] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.588302] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.588303] usb usb6: Product: UHCI Host Controller
[ 3.588304] usb usb6: Manufacturer: Linux 2.6.32.12-0.7-xen uhci_hcd
[ 3.588310] usb usb6: SerialNumber: 0000:00:1d.0
[ 3.588342] usb usb6: configuration #1 chosen from 1 choice
[ 3.588355] hub 6-0:1.0: USB hub found
[ 3.588364] hub 6-0:1.0: 2 ports detected
[ 3.588396] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 3.588404] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.588407] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 7
[ 3.588433] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008c00
[ 3.588466] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.588468] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.588469] usb usb7: Product: UHCI Host Controller
[ 3.588469] usb usb7: Manufacturer: Linux 2.6.32.12-0.7-xen uhci_hcd
[ 3.588470] usb usb7: SerialNumber: 0000:00:1d.1
[ 3.588503] usb usb7: configuration #1 chosen from 1 choice
[ 3.588518] hub 7-0:1.0: USB hub found
[ 3.588529] hub 7-0:1.0: 2 ports detected
[ 3.588574] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 3.588585] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.588591] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 8
[ 3.588621] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009000
[ 3.588665] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.588667] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.588669] usb usb8: Product: UHCI Host Controller
[ 3.588670] usb usb8: Manufacturer: Linux 2.6.32.12-0.7-xen uhci_hcd
[ 3.588671] usb usb8: SerialNumber: 0000:00:1d.2
[ 3.588720] usb usb8: configuration #1 chosen from 1 choice
[ 3.588741] hub 8-0:1.0: USB hub found
[ 3.588753] hub 8-0:1.0: 2 ports detected
[ 3.608172] sd 3:0:0:0: [sda] Attached SCSI disk
[ 5.652177] usb 3-1: new full speed USB device using uhci_hcd and address
2
[ 6.193751] usb 3-1: New USB device found, idVendor=0557, idProduct=7000
[ 6.220260] usb 3-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 6.257709] usb 3-1: configuration #1 chosen from 1 choice
[ 6.284023] hub 3-1:1.0: USB hub found
[ 6.309979] hub 3-1:1.0: 4 ports detected
[ 6.013953] kjournald starting. Commit interval 15 seconds
[ 6.014144] EXT3 FS on sda2, internal journal
[ 6.014149] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.613822] usb 3-1.1: new low speed USB device using uhci_hcd and
address 3
[ 6.814770] usb 3-1.1: New USB device found, idVendor=0a81,
idProduct=0205
[ 6.841727] usb 3-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 6.866430] usb 3-1.1: Product: PS2 to USB Converter
[ 6.891045] usb 3-1.1: Manufacturer: CHESEN
[ 6.891101] usb 3-1.1: configuration #1 chosen from 1 choice
[ 8.056424] udevd version 128 started
[ 8.272808] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 8.276484] ACPI: WMI: Mapper loaded
[ 8.327885] ACPI: Power Button [PWRB]
[ 8.352725] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 8.379206] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 8.405331] ACPI: Power Button [PWRF]
[ 9.094274] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 9.125265] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 8.739063] iTCO_vendor_support: vendor-support=0
[ 9.178285] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 8.833402] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
->
IRQ 18
[ 9.222522] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 9.222524] Uniform CD-ROM driver Revision: 3.20
[ 8.933922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 8.960942] iTCO_wdt: Found a ICH10R TCO device (Version=2,
TCOBASE=0x0860)
[ 8.988080] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.038509] ohci1394 0000:02:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 9.090367] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.092298] rtc_cmos 00:03: RTC can wake from S4
[ 9.092350] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 9.092431] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 9.201456] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ
17
[ 9.229410] eth0: RTL8168d/8111d at 0xffffc900111dc000,
00:25:22:4c:18:b7, XID 081000c0 IRQ 465
[ 9.302291] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
MMIO=[f8def800-f8deffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 9.726427] usbcore: registered new interface driver hiddev
[ 9.779273] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input3
[ 9.812868] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10
Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.1/input0
[ 9.888261] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input4
[ 9.922109] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10
Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.1/input1
[ 9.953720] usbcore: registered new interface driver usbhid
[ 9.985310] usbhid: v2.6:USB HID core driver
[ 9.812844] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
IRQ 22
[ 11.044624] ohci1394: fw-host0: Unrecoverable error!
[ 11.076663] ohci1394: fw-host0: Async Req Tx Context died: ctrl[00008806]
cmdptr[0b17a002]
[ 10.880242] ALSA hda_intel.c:687: azx_get_response timeout, switching to
polling mode: last cmd=0x000f0000
[ 12.328050] ALSA hda_intel.c:1390: Codec #0 probe error; disabling it...
[ 13.394596] ALSA hda_intel.c:726: hda_intel: azx_get_response timeout,
switching to single_cmd mode: last cmd=0x000f0000
-caz
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users