thr3ads.net - Xen users - [Xen-users] Error: Error creating domain: (22, ''Invalid argument'') [Nov 2005]

If this information is useful, please help other people find it:
Share via:

Andrew Turnbull

2005-Nov-21 18:29 UTC

[Xen-users] Error: Error creating domain: (22, ''Invalid argument'')

Hi there

I get the following error message when i try to "xm create
<domid>"

Error: Error creating domain: (22, ''Invalid argument'')

I have included everything i can think of

Thanks


The DomU config is

kernel = "/boot/vmlinuz-2.6.12-xenU"
ramdisk = "/boot/initrd-2.6.12.6-xenU.img"
memory = 128
name = "xen01"
nics=1
disk = [ ''phy:/dev/xensys01/xen01,sda1,w'',
''phy:/dev/xensys01/xen01swap,sda2,w'']
root = "/dev/sda1 ro"

My xm dmesg is

 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 3.0-devel (root@(none)) (gcc version 3.4.4 20050721 (Red
Hat 3.4.4-2)) Sun Nov 20 17:49:04 GMT 2005
 Latest ChangeSet: Sat Nov 19 09:37:14 2005 +0100 7901:aad88a902892

(XEN) Physical RAM map:
(XEN)  0000000000000000 - 000000000009fc00 (usable)
(XEN)  000000000009fc00 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000e8100000 (usable)
(XEN)  00000000efff0000 - 00000000effff000 (ACPI data)
(XEN)  00000000effff000 - 00000000f0000000 (ACPI NVS)
(XEN)  00000000fee00000 - 00000000fee01000 (reserved)
(XEN)  00000000fff80000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000400000000 (usable)
(XEN) System RAM: 16000MB (16384636kB)
(XEN) Xen heap: 9MB (10124kB)
(XEN) PAE enabled, limit: 16 GB
(XEN) found SMP MP-table at 000ff780
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 AMI                                   ) @ 0x000ff900
(XEN) ACPI: RSDT (v001 RCC    GCHE     0x00000001 MSFT 0x01000000) @ 0xefff0000
(XEN) ACPI: FADT (v001 RCC    GCHE     0x00000001 MSFT 0x01000000) @ 0xefff0030
(XEN) ACPI: MADT (v001 RCC    GCHE     0x00000001 MSFT 0x01000000) @ 0xefff00b0
(XEN) ACPI: DSDT (v001    RCC     GCHE 0x00000100 MSFT 0x0100000d) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:2 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 15:2 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 15:2 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
(XEN) Processor #3 15:2 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
(XEN) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
(XEN) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 3 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 1993.586 MHz processor.
(XEN) Using scheduler: Simple EDF Scheduler (sedf)
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
(XEN) CPU: L2 cache: 512K
(XEN) CPU: L3 cache: 1024K
(XEN) CPU: Hyper-Threading is disabled
(XEN) CPU0: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
(XEN) CPU: L2 cache: 512K
(XEN) CPU: L3 cache: 1024K
(XEN) CPU: Hyper-Threading is disabled
(XEN) CPU1: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
(XEN) Booting processor 2/2 eip 90000
(XEN) Initializing CPU#2
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
(XEN) CPU: L2 cache: 512K
(XEN) CPU: L3 cache: 1024K
(XEN) CPU: Hyper-Threading is disabled
(XEN) CPU2: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
(XEN) Booting processor 3/3 eip 90000
(XEN) Initializing CPU#3
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
(XEN) CPU: L2 cache: 512K
(XEN) CPU: L3 cache: 1024K
(XEN) CPU: Hyper-Threading is disabled
(XEN) CPU3: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
(XEN) ...trying to set up timer (IRQ0) through the 8259A ...  failed.
(XEN) ...trying to set up timer as Virtual Wire IRQ... works.
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 4 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
''GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=yes,LOADER=generic''
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000007800000->0000000008000000 (129024 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: c0100000->c06205e4
(XEN)  Init. ramdisk: c0621000->c06c2800
(XEN)  Phys-Mach map: c06c3000->c0743000
(XEN)  Start info:    c0743000->c0744000
(XEN)  Page tables:   c0744000->c074d000
(XEN)  Boot stack:    c074d000->c074e000
(XEN)  TOTAL:         c0000000->c0800000
(XEN)  ENTRY ADDRESS: c0100000
(XEN) Initrd len 0xa1800, start at 0xc0621000
(XEN) Scrubbing Free RAM:
....................................................................................................................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times
to switch
input to Xen).
(XEN) mtrr: type mismatch for fb000000,1000000 old: write-back new:
write-combining
(XEN) microcode: CPU1 updated from revision 0x13 to 0x2a, date = 08112004
(XEN) microcode: CPU2 updated from revision 0x13 to 0x2a, date = 08112004
(XEN) microcode: CPU3 updated from revision 0x13 to 0x2a, date = 08112004
(XEN) microcode: CPU0 updated from revision 0x13 to 0x2a, date = 08112004

My Xend.log

[2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:178)
XendDomainInfo.create([''vm'', [''name'',
''xen01''], [''memory'',
''128''],
[''image'', [''linux'',
[''kernel'', ''/boot/vmlinuz-2.6.12-xenU''],
[''ramdisk'',
''/boot/initrd-2.6.12.6-xenU.img''], [''root'',
''/dev/sda1
ro''], [''args'', ''4''],
[''vcpus'', ''1''], [''vcpus'',
''1''], [''boot'', ''c'']]],
[''device'', [''vbd'',
[''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'',
''sda1''], [''mode'', ''w'']]],
[''device'', [''vbd'',
[''uname'',
''phy:/dev/xensys01/xen01swap''], [''dev'',
''sda2''], [''mode'', ''w'']]],
[''device'', [''vif'']]])
[2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:283)
parseConfig: config is [''vm'', [''name'',
''xen01''], [''memory'',
''128''],
[''image'', [''linux'',
[''kernel'', ''/boot/vmlinuz-2.6.12-xenU''],
[''ramdisk'',
''/boot/initrd-2.6.12.6-xenU.img''], [''root'',
''/dev/sda1
ro''], [''args'', ''4''],
[''vcpus'', ''1''], [''vcpus'',
''1''], [''boot'', ''c'']]],
[''device'', [''vbd'',
[''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'',
''sda1''], [''mode'', ''w'']]],
[''device'', [''vbd'',
[''uname'',
''phy:/dev/xensys01/xen01swap''], [''dev'',
''sda2''], [''mode'', ''w'']]],
[''device'', [''vif'']]]
[2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:337)
parseConfig: result is {''ssidref'': None,
''uuid'': None, ''on_crash'':
None, ''on_reboot'': None, ''image'':
[''linux'', [''kernel'',
''/boot/vmlinuz-2.6.12-xenU''], [''ramdisk'',
''/boot/initrd-2.6.12.6-xenU.img''], [''root'',
''/dev/sda1 ro''], [''args'',
''4''], [''vcpus'', ''1''],
[''vcpus'', ''1''], [''boot'',
''c'']], ''on_poweroff'':
None, ''name'': ''xen01'',
''backend'': [], ''vcpus'': 1,
''cpu_weight'': None,
''vcpu_avail'': None, ''memory'': 128,
''device'': [(''vbd'', [''vbd'',
[''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'', ''sda1''], [''mode'',
''w'']]), (''vbd'', [''vbd'',
[''uname'', ''phy:/dev/xensys01/xen01swap''],
[''dev'', ''sda2''], [''mode'',
''w'']]), (''vif'', [''vif''])],
''bootloader'':
None, ''cpu'': None, ''maxmem'': None}
[2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1065)
XendDomainInfo.construct: None 0
[2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1097)
XendDomainInfo.initDomain: 6 1.0
[2005-11-21 18:27:20 xend] INFO (image:132) buildDomain os=linux dom=6 vcpus=1
[2005-11-21 18:27:20 xend] DEBUG (image:170) dom            = 6
[2005-11-21 18:27:20 xend] DEBUG (image:171) image         
/boot/vmlinuz-2.6.12-xenU
[2005-11-21 18:27:20 xend] DEBUG (image:172) store_evtchn   = 1
[2005-11-21 18:27:20 xend] DEBUG (image:173) console_evtchn = 2
[2005-11-21 18:27:20 xend] DEBUG (image:174) cmdline        = 
root=/dev/sda1 ro 4
[2005-11-21 18:27:20 xend] DEBUG (image:175) ramdisk       
/boot/initrd-2.6.12.6-xenU.img
[2005-11-21 18:27:20 xend] DEBUG (image:176) vcpus          = 1
[2005-11-21 18:27:20 xend.XendDomainInfo] ERROR (XendDomainInfo:190)
Domain construction failed
Traceback (most recent call last):
  File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py",
line 183, in create
    vm.initDomain()
  File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py",
line 1118, in initDomain
    channel_details = self.image.createImage()
  File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
line 115, in createImage
    return self.createDomain()
  File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
line 134, in createDomain
    result = self.buildDomain()
  File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
line 183, in buildDomain
    ramdisk        = self.ramdisk)
error: (22, ''Invalid argument'')
[2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1183)
XendDomainInfo.destroy: domid=6
[2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1191)
XendDomainInfo.destroyDomain(6)
[2005-11-21 18:27:20 xend] ERROR (SrvBase:87) Request create failed.
Traceback (most recent call last):
  File
"/root/xen-unstable/dist/install/usr/lib/python/xen/web/SrvBase.py",
line 85, in perform
    return op_method(op, req)
  File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/server/SrvDomainDir.py",
line 82, in op_create
    raise XendError("Error creating domain: " + str(ex))
XendError: Error creating domain: (22, ''Invalid argument'')

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Tarmo Tänav

2005-Nov-21 18:46 UTC

head link

Re: [Xen-users] Error: Error creating domain: (22, ''Invalid argument'')

Hi,

I had a similiar problem, seemed to be related to networking,
because disabling it made things work well.
After getting the invalid message the domain appeared to be
in paused state, as shown by "xm list", just running "xm unpause
domid"
made it work.

--
Tarmo Tänav

On E, 2005-11-21 at 18:29 +0000, Andrew Turnbull wrote:> Hi there
> 
> I get the following error message when i try to "xm create
<domid>"
> 
> Error: Error creating domain: (22, ''Invalid argument'')
> 
> I have included everything i can think of
> 
> Thanks
> 
> 
> The DomU config is
> 
> kernel = "/boot/vmlinuz-2.6.12-xenU"
> ramdisk = "/boot/initrd-2.6.12.6-xenU.img"
> memory = 128
> name = "xen01"
> nics=1
> disk = [ ''phy:/dev/xensys01/xen01,sda1,w'',
''phy:/dev/xensys01/xen01swap,sda2,w'']
> root = "/dev/sda1 ro"
> 
> My xm dmesg is
> 
>  http://www.cl.cam.ac.uk/netos/xen
>  University of Cambridge Computer Laboratory
> 
>  Xen version 3.0-devel (root@(none)) (gcc version 3.4.4 20050721 (Red
> Hat 3.4.4-2)) Sun Nov 20 17:49:04 GMT 2005
>  Latest ChangeSet: Sat Nov 19 09:37:14 2005 +0100 7901:aad88a902892
> 
> (XEN) Physical RAM map:
> (XEN)  0000000000000000 - 000000000009fc00 (usable)
> (XEN)  000000000009fc00 - 00000000000a0000 (reserved)
> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 00000000e8100000 (usable)
> (XEN)  00000000efff0000 - 00000000effff000 (ACPI data)
> (XEN)  00000000effff000 - 00000000f0000000 (ACPI NVS)
> (XEN)  00000000fee00000 - 00000000fee01000 (reserved)
> (XEN)  00000000fff80000 - 0000000100000000 (reserved)
> (XEN)  0000000100000000 - 0000000400000000 (usable)
> (XEN) System RAM: 16000MB (16384636kB)
> (XEN) Xen heap: 9MB (10124kB)
> (XEN) PAE enabled, limit: 16 GB
> (XEN) found SMP MP-table at 000ff780
> (XEN) DMI 2.3 present.
> (XEN) Using APIC driver default
> (XEN) ACPI: RSDP (v000 AMI                                   ) @ 0x000ff900
> (XEN) ACPI: RSDT (v001 RCC    GCHE     0x00000001 MSFT 0x01000000) @
0xefff0000
> (XEN) ACPI: FADT (v001 RCC    GCHE     0x00000001 MSFT 0x01000000) @
0xefff0030
> (XEN) ACPI: MADT (v001 RCC    GCHE     0x00000001 MSFT 0x01000000) @
0xefff00b0
> (XEN) ACPI: DSDT (v001    RCC     GCHE 0x00000100 MSFT 0x0100000d) @
0x00000000
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> (XEN) Processor #1 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> (XEN) Processor #2 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> (XEN) Processor #3 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
> (XEN) ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
> (XEN) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
> (XEN) ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
> (XEN) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) Enabling APIC mode:  Flat.  Using 3 I/O APICs
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Initializing CPU#0
> (XEN) Detected 1993.586 MHz processor.
> (XEN) Using scheduler: Simple EDF Scheduler (sedf)
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> (XEN) CPU: L2 cache: 512K
> (XEN) CPU: L3 cache: 1024K
> (XEN) CPU: Hyper-Threading is disabled
> (XEN) CPU0: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> (XEN) Booting processor 1/1 eip 90000
> (XEN) Initializing CPU#1
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> (XEN) CPU: L2 cache: 512K
> (XEN) CPU: L3 cache: 1024K
> (XEN) CPU: Hyper-Threading is disabled
> (XEN) CPU1: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> (XEN) Booting processor 2/2 eip 90000
> (XEN) Initializing CPU#2
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> (XEN) CPU: L2 cache: 512K
> (XEN) CPU: L3 cache: 1024K
> (XEN) CPU: Hyper-Threading is disabled
> (XEN) CPU2: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> (XEN) Booting processor 3/3 eip 90000
> (XEN) Initializing CPU#3
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> (XEN) CPU: L2 cache: 512K
> (XEN) CPU: L3 cache: 1024K
> (XEN) CPU: Hyper-Threading is disabled
> (XEN) CPU3: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> (XEN) Total of 4 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
> (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> (XEN) ...trying to set up timer (IRQ0) through the 8259A ...  failed.
> (XEN) ...trying to set up timer as Virtual Wire IRQ... works.
> (XEN) checking TSC synchronization across 4 CPUs: passed.
> (XEN) Platform timer is 1.193MHz PIT
> (XEN) Brought up 4 CPUs
> (XEN) mtrr: v2.0 (20020519)
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen-ELF header found:
>
''GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=yes,LOADER=generic''
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   0000000007800000->0000000008000000 (129024 pages
> to be allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN)  Loaded kernel: c0100000->c06205e4
> (XEN)  Init. ramdisk: c0621000->c06c2800
> (XEN)  Phys-Mach map: c06c3000->c0743000
> (XEN)  Start info:    c0743000->c0744000
> (XEN)  Page tables:   c0744000->c074d000
> (XEN)  Boot stack:    c074d000->c074e000
> (XEN)  TOTAL:         c0000000->c0800000
> (XEN)  ENTRY ADDRESS: c0100000
> (XEN) Initrd len 0xa1800, start at 0xc0621000
> (XEN) Scrubbing Free RAM:
>
....................................................................................................................................................................done.
> (XEN) Xen trace buffers: disabled
> (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three
times to switch
> input to Xen).
> (XEN) mtrr: type mismatch for fb000000,1000000 old: write-back new:
> write-combining
> (XEN) microcode: CPU1 updated from revision 0x13 to 0x2a, date = 08112004
> (XEN) microcode: CPU2 updated from revision 0x13 to 0x2a, date = 08112004
> (XEN) microcode: CPU3 updated from revision 0x13 to 0x2a, date = 08112004
> (XEN) microcode: CPU0 updated from revision 0x13 to 0x2a, date = 08112004
> 
> My Xend.log
> 
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:178)
> XendDomainInfo.create([''vm'', [''name'',
''xen01''], [''memory'',
''128''],
> [''image'', [''linux'',
[''kernel'', ''/boot/vmlinuz-2.6.12-xenU''],
> [''ramdisk'',
''/boot/initrd-2.6.12.6-xenU.img''], [''root'',
''/dev/sda1
> ro''], [''args'', ''4''],
[''vcpus'', ''1''], [''vcpus'',
''1''], [''boot'', ''c'']]],
> [''device'', [''vbd'',
[''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'',
> ''sda1''], [''mode'',
''w'']]], [''device'', [''vbd'',
[''uname'',
> ''phy:/dev/xensys01/xen01swap''], [''dev'',
''sda2''], [''mode'', ''w'']]],
> [''device'', [''vif'']]])
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:283)
> parseConfig: config is [''vm'', [''name'',
''xen01''], [''memory'',
''128''],
> [''image'', [''linux'',
[''kernel'', ''/boot/vmlinuz-2.6.12-xenU''],
> [''ramdisk'',
''/boot/initrd-2.6.12.6-xenU.img''], [''root'',
''/dev/sda1
> ro''], [''args'', ''4''],
[''vcpus'', ''1''], [''vcpus'',
''1''], [''boot'', ''c'']]],
> [''device'', [''vbd'',
[''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'',
> ''sda1''], [''mode'',
''w'']]], [''device'', [''vbd'',
[''uname'',
> ''phy:/dev/xensys01/xen01swap''], [''dev'',
''sda2''], [''mode'', ''w'']]],
> [''device'', [''vif'']]]
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:337)
> parseConfig: result is {''ssidref'': None,
''uuid'': None, ''on_crash'':
> None, ''on_reboot'': None, ''image'':
[''linux'', [''kernel'',
> ''/boot/vmlinuz-2.6.12-xenU''],
[''ramdisk'',
> ''/boot/initrd-2.6.12.6-xenU.img''],
[''root'', ''/dev/sda1 ro''],
[''args'',
> ''4''], [''vcpus'', ''1''],
[''vcpus'', ''1''], [''boot'',
''c'']], ''on_poweroff'':
> None, ''name'': ''xen01'',
''backend'': [], ''vcpus'': 1,
''cpu_weight'': None,
> ''vcpu_avail'': None, ''memory'': 128,
''device'': [(''vbd'', [''vbd'',
> [''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'', ''sda1''], [''mode'',
> ''w'']]), (''vbd'',
[''vbd'', [''uname'',
''phy:/dev/xensys01/xen01swap''],
> [''dev'', ''sda2''],
[''mode'', ''w'']]), (''vif'',
[''vif''])], ''bootloader'':
> None, ''cpu'': None, ''maxmem'': None}
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1065)
> XendDomainInfo.construct: None 0
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1097)
> XendDomainInfo.initDomain: 6 1.0
> [2005-11-21 18:27:20 xend] INFO (image:132) buildDomain os=linux dom=6
vcpus=1
> [2005-11-21 18:27:20 xend] DEBUG (image:170) dom            = 6
> [2005-11-21 18:27:20 xend] DEBUG (image:171) image          >
/boot/vmlinuz-2.6.12-xenU
> [2005-11-21 18:27:20 xend] DEBUG (image:172) store_evtchn   = 1
> [2005-11-21 18:27:20 xend] DEBUG (image:173) console_evtchn = 2
> [2005-11-21 18:27:20 xend] DEBUG (image:174) cmdline        = 
> root=/dev/sda1 ro 4
> [2005-11-21 18:27:20 xend] DEBUG (image:175) ramdisk        >
/boot/initrd-2.6.12.6-xenU.img
> [2005-11-21 18:27:20 xend] DEBUG (image:176) vcpus          = 1
> [2005-11-21 18:27:20 xend.XendDomainInfo] ERROR (XendDomainInfo:190)
> Domain construction failed
> Traceback (most recent call last):
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py",
> line 183, in create
>     vm.initDomain()
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py",
> line 1118, in initDomain
>     channel_details = self.image.createImage()
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
> line 115, in createImage
>     return self.createDomain()
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
> line 134, in createDomain
>     result = self.buildDomain()
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
> line 183, in buildDomain
>     ramdisk        = self.ramdisk)
> error: (22, ''Invalid argument'')
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1183)
> XendDomainInfo.destroy: domid=6
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1191)
> XendDomainInfo.destroyDomain(6)
> [2005-11-21 18:27:20 xend] ERROR (SrvBase:87) Request create failed.
> Traceback (most recent call last):
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/web/SrvBase.py",
> line 85, in perform
>     return op_method(op, req)
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/server/SrvDomainDir.py",
> line 82, in op_create
>     raise XendError("Error creating domain: " + str(ex))
> XendError: Error creating domain: (22, ''Invalid
argument'')
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Andrew Turnbull

2005-Nov-21 18:59 UTC

head link

Re: [Xen-users] Error: Error creating domain: (22, ''Invalid argument'')

On 21/11/05, Tarmo Tänav <tarmo@itech.ee> wrote:> Hi,
>
> I had a similiar problem, seemed to be related to networking,
> because disabling it made things work well.
> After getting the invalid message the domain appeared to be
> in paused state, as shown by "xm list", just running "xm
unpause domid"
> made it work.
Hi

Its not actually appearing in the xm list at all. So How do I disable
the networking ? Please can you explain.

Thanks>
> --
> Tarmo Tänav
>
> On E, 2005-11-21 at 18:29 +0000, Andrew Turnbull wrote:
> > Hi there
> >
> > I get the following error message when i try to "xm create
<domid>"
> >
> > Error: Error creating domain: (22, ''Invalid
argument'')
> >
> > I have included everything i can think of
> >
> > Thanks
> >
> >
> > The DomU config is
> >
> > kernel = "/boot/vmlinuz-2.6.12-xenU"
> > ramdisk = "/boot/initrd-2.6.12.6-xenU.img"
> > memory = 128
> > name = "xen01"
> > nics=1
> > disk = [ ''phy:/dev/xensys01/xen01,sda1,w'',
''phy:/dev/xensys01/xen01swap,sda2,w'']
> > root = "/dev/sda1 ro"
> >
> > My xm dmesg is
> >
> >  http://www.cl.cam.ac.uk/netos/xen
> >  University of Cambridge Computer Laboratory
> >
> >  Xen version 3.0-devel (root@(none)) (gcc version 3.4.4 20050721 (Red
> > Hat 3.4.4-2)) Sun Nov 20 17:49:04 GMT 2005
> >  Latest ChangeSet: Sat Nov 19 09:37:14 2005 +0100 7901:aad88a902892
> >
> > (XEN) Physical RAM map:
> > (XEN)  0000000000000000 - 000000000009fc00 (usable)
> > (XEN)  000000000009fc00 - 00000000000a0000 (reserved)
> > (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> > (XEN)  0000000000100000 - 00000000e8100000 (usable)
> > (XEN)  00000000efff0000 - 00000000effff000 (ACPI data)
> > (XEN)  00000000effff000 - 00000000f0000000 (ACPI NVS)
> > (XEN)  00000000fee00000 - 00000000fee01000 (reserved)
> > (XEN)  00000000fff80000 - 0000000100000000 (reserved)
> > (XEN)  0000000100000000 - 0000000400000000 (usable)
> > (XEN) System RAM: 16000MB (16384636kB)
> > (XEN) Xen heap: 9MB (10124kB)
> > (XEN) PAE enabled, limit: 16 GB
> > (XEN) found SMP MP-table at 000ff780
> > (XEN) DMI 2.3 present.
> > (XEN) Using APIC driver default
> > (XEN) ACPI: RSDP (v000 AMI                                   ) @
0x000ff900
> > (XEN) ACPI: RSDT (v001 RCC    GCHE     0x00000001 MSFT 0x01000000) @
0xefff0000
> > (XEN) ACPI: FADT (v001 RCC    GCHE     0x00000001 MSFT 0x01000000) @
0xefff0030
> > (XEN) ACPI: MADT (v001 RCC    GCHE     0x00000001 MSFT 0x01000000) @
0xefff00b0
> > (XEN) ACPI: DSDT (v001    RCC     GCHE 0x00000100 MSFT 0x0100000d) @
0x00000000
> > (XEN) ACPI: Local APIC address 0xfee00000
> > (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > (XEN) Processor #0 15:2 APIC version 20
> > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> > (XEN) Processor #1 15:2 APIC version 20
> > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> > (XEN) Processor #2 15:2 APIC version 20
> > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> > (XEN) Processor #3 15:2 APIC version 20
> > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
> > (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> > (XEN) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
> > (XEN) ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
> > (XEN) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
> > (XEN) ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
> > (XEN) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
> > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > (XEN) ACPI: IRQ0 used by override.
> > (XEN) ACPI: IRQ2 used by override.
> > (XEN) Enabling APIC mode:  Flat.  Using 3 I/O APICs
> > (XEN) Using ACPI (MADT) for SMP configuration information
> > (XEN) Initializing CPU#0
> > (XEN) Detected 1993.586 MHz processor.
> > (XEN) Using scheduler: Simple EDF Scheduler (sedf)
> > (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> > (XEN) CPU: L2 cache: 512K
> > (XEN) CPU: L3 cache: 1024K
> > (XEN) CPU: Hyper-Threading is disabled
> > (XEN) CPU0: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> > (XEN) Booting processor 1/1 eip 90000
> > (XEN) Initializing CPU#1
> > (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> > (XEN) CPU: L2 cache: 512K
> > (XEN) CPU: L3 cache: 1024K
> > (XEN) CPU: Hyper-Threading is disabled
> > (XEN) CPU1: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> > (XEN) Booting processor 2/2 eip 90000
> > (XEN) Initializing CPU#2
> > (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> > (XEN) CPU: L2 cache: 512K
> > (XEN) CPU: L3 cache: 1024K
> > (XEN) CPU: Hyper-Threading is disabled
> > (XEN) CPU2: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> > (XEN) Booting processor 3/3 eip 90000
> > (XEN) Initializing CPU#3
> > (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> > (XEN) CPU: L2 cache: 512K
> > (XEN) CPU: L3 cache: 1024K
> > (XEN) CPU: Hyper-Threading is disabled
> > (XEN) CPU3: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> > (XEN) Total of 4 processors activated.
> > (XEN) ENABLING IO-APIC IRQs
> > (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
> > (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> > (XEN) ...trying to set up timer (IRQ0) through the 8259A ...  failed.
> > (XEN) ...trying to set up timer as Virtual Wire IRQ... works.
> > (XEN) checking TSC synchronization across 4 CPUs: passed.
> > (XEN) Platform timer is 1.193MHz PIT
> > (XEN) Brought up 4 CPUs
> > (XEN) mtrr: v2.0 (20020519)
> > (XEN) *** LOADING DOMAIN 0 ***
> > (XEN) Xen-ELF header found:
> >
''GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=yes,LOADER=generic''
> > (XEN) PHYSICAL MEMORY ARRANGEMENT:
> > (XEN)  Dom0 alloc.:   0000000007800000->0000000008000000 (129024
pages
> > to be allocated)
> > (XEN) VIRTUAL MEMORY ARRANGEMENT:
> > (XEN)  Loaded kernel: c0100000->c06205e4
> > (XEN)  Init. ramdisk: c0621000->c06c2800
> > (XEN)  Phys-Mach map: c06c3000->c0743000
> > (XEN)  Start info:    c0743000->c0744000
> > (XEN)  Page tables:   c0744000->c074d000
> > (XEN)  Boot stack:    c074d000->c074e000
> > (XEN)  TOTAL:         c0000000->c0800000
> > (XEN)  ENTRY ADDRESS: c0100000
> > (XEN) Initrd len 0xa1800, start at 0xc0621000
> > (XEN) Scrubbing Free RAM:
> >
....................................................................................................................................................................done.
> > (XEN) Xen trace buffers: disabled
> > (XEN) *** Serial input -> DOM0 (type ''CTRL-a''
three times to switch
> > input to Xen).
> > (XEN) mtrr: type mismatch for fb000000,1000000 old: write-back new:
> > write-combining
> > (XEN) microcode: CPU1 updated from revision 0x13 to 0x2a, date =
08112004
> > (XEN) microcode: CPU2 updated from revision 0x13 to 0x2a, date =
08112004
> > (XEN) microcode: CPU3 updated from revision 0x13 to 0x2a, date =
08112004
> > (XEN) microcode: CPU0 updated from revision 0x13 to 0x2a, date =
08112004
> >
> > My Xend.log
> >
> > [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:178)
> > XendDomainInfo.create([''vm'',
[''name'', ''xen01''],
[''memory'', ''128''],
> > [''image'', [''linux'',
[''kernel'', ''/boot/vmlinuz-2.6.12-xenU''],
> > [''ramdisk'',
''/boot/initrd-2.6.12.6-xenU.img''], [''root'',
''/dev/sda1
> > ro''], [''args'', ''4''],
[''vcpus'', ''1''], [''vcpus'',
''1''], [''boot'', ''c'']]],
> > [''device'', [''vbd'',
[''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'',
> > ''sda1''], [''mode'',
''w'']]], [''device'', [''vbd'',
[''uname'',
> > ''phy:/dev/xensys01/xen01swap''],
[''dev'', ''sda2''], [''mode'',
''w'']]],
> > [''device'', [''vif'']]])
> > [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:283)
> > parseConfig: config is [''vm'',
[''name'', ''xen01''],
[''memory'', ''128''],
> > [''image'', [''linux'',
[''kernel'', ''/boot/vmlinuz-2.6.12-xenU''],
> > [''ramdisk'',
''/boot/initrd-2.6.12.6-xenU.img''], [''root'',
''/dev/sda1
> > ro''], [''args'', ''4''],
[''vcpus'', ''1''], [''vcpus'',
''1''], [''boot'', ''c'']]],
> > [''device'', [''vbd'',
[''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'',
> > ''sda1''], [''mode'',
''w'']]], [''device'', [''vbd'',
[''uname'',
> > ''phy:/dev/xensys01/xen01swap''],
[''dev'', ''sda2''], [''mode'',
''w'']]],
> > [''device'', [''vif'']]]
> > [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:337)
> > parseConfig: result is {''ssidref'': None,
''uuid'': None, ''on_crash'':
> > None, ''on_reboot'': None, ''image'':
[''linux'', [''kernel'',
> > ''/boot/vmlinuz-2.6.12-xenU''],
[''ramdisk'',
> > ''/boot/initrd-2.6.12.6-xenU.img''],
[''root'', ''/dev/sda1 ro''],
[''args'',
> > ''4''], [''vcpus'',
''1''], [''vcpus'', ''1''],
[''boot'', ''c'']],
''on_poweroff'':
> > None, ''name'': ''xen01'',
''backend'': [], ''vcpus'': 1,
''cpu_weight'': None,
> > ''vcpu_avail'': None, ''memory'': 128,
''device'': [(''vbd'', [''vbd'',
> > [''uname'',
''phy:/dev/xensys01/xen01''], [''dev'',
''sda1''], [''mode'',
> > ''w'']]), (''vbd'',
[''vbd'', [''uname'',
''phy:/dev/xensys01/xen01swap''],
> > [''dev'', ''sda2''],
[''mode'', ''w'']]), (''vif'',
[''vif''])], ''bootloader'':
> > None, ''cpu'': None, ''maxmem'': None}
> > [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1065)
> > XendDomainInfo.construct: None 0
> > [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1097)
> > XendDomainInfo.initDomain: 6 1.0
> > [2005-11-21 18:27:20 xend] INFO (image:132) buildDomain os=linux dom=6
vcpus=1
> > [2005-11-21 18:27:20 xend] DEBUG (image:170) dom            = 6
> > [2005-11-21 18:27:20 xend] DEBUG (image:171) image          > >
/boot/vmlinuz-2.6.12-xenU
> > [2005-11-21 18:27:20 xend] DEBUG (image:172) store_evtchn   = 1
> > [2005-11-21 18:27:20 xend] DEBUG (image:173) console_evtchn = 2
> > [2005-11-21 18:27:20 xend] DEBUG (image:174) cmdline        > >
root=/dev/sda1 ro 4
> > [2005-11-21 18:27:20 xend] DEBUG (image:175) ramdisk        > >
/boot/initrd-2.6.12.6-xenU.img
> > [2005-11-21 18:27:20 xend] DEBUG (image:176) vcpus          = 1
> > [2005-11-21 18:27:20 xend.XendDomainInfo] ERROR (XendDomainInfo:190)
> > Domain construction failed
> > Traceback (most recent call last):
> >   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py",
> > line 183, in create
> >     vm.initDomain()
> >   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py",
> > line 1118, in initDomain
> >     channel_details = self.image.createImage()
> >   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
> > line 115, in createImage
> >     return self.createDomain()
> >   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
> > line 134, in createDomain
> >     result = self.buildDomain()
> >   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
> > line 183, in buildDomain
> >     ramdisk        = self.ramdisk)
> > error: (22, ''Invalid argument'')
> > [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1183)
> > XendDomainInfo.destroy: domid=6
> > [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1191)
> > XendDomainInfo.destroyDomain(6)
> > [2005-11-21 18:27:20 xend] ERROR (SrvBase:87) Request create failed.
> > Traceback (most recent call last):
> >   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/web/SrvBase.py",
> > line 85, in perform
> >     return op_method(op, req)
> >   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/server/SrvDomainDir.py",
> > line 82, in op_create
> >     raise XendError("Error creating domain: " + str(ex))
> > XendError: Error creating domain: (22, ''Invalid
argument'')
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users
>
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Tarmo Tänav

2005-Nov-21 19:43 UTC

head link

Re: [Xen-users] Error: Error creating domain: (22, ''Invalid argument'')

On E, 2005-11-21 at 18:59 +0000, Andrew Turnbull wrote:> On 21/11/05, Tarmo Tänav <tarmo@itech.ee> wrote:
> > Hi,
> >
> > I had a similiar problem, seemed to be related to networking,
> > because disabling it made things work well.
> > After getting the invalid message the domain appeared to be
> > in paused state, as shown by "xm list", just running
"xm unpause domid"
> > made it work.
> 
> Hi
> 
> Its not actually appearing in the xm list at all. So How do I disable
> the networking ? Please can you explain.
If it''s not appering at all then you likely have a different problem
than the one I had. To disable networking you only have to set
"nics=0"
in your domU configuration. 


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Steven Howe

2005-Nov-21 19:59 UTC

head link

Re: [Xen-users] Error: Error creating domain: (22, ''Invalid argument'')

Hi Andrew,

try:
disk = [ ''phy:xensys01/xen01,sda1,w'',
''phy:xensys01/xen01swap,sda2,w'']
(note lack of ''dev'' entry. I think thats a built in)

Steven


On Mon, 2005-11-21 at 18:29 +0000, Andrew Turnbull wrote:
> Hi there
> 
> I get the following error message when i try to "xm create
<domid>"
> 
> Error: Error creating domain: (22, ''Invalid argument'')
> 
> I have included everything i can think of
> 
> Thanks
> 
> 
> The DomU config is
> 
> kernel = "/boot/vmlinuz-2.6.12-xenU"
> ramdisk = "/boot/initrd-2.6.12.6-xenU.img"
> memory = 128
> name = "xen01"
> nics=1

> root = "/dev/sda1 ro"
> 
> My xm dmesg is
> 
>  http://www.cl.cam.ac.uk/netos/xen
>  University of Cambridge Computer Laboratory
> 
>  Xen version 3.0-devel (root@(none)) (gcc version 3.4.4 20050721 (Red
> Hat 3.4.4-2)) Sun Nov 20 17:49:04 GMT 2005
>  Latest ChangeSet: Sat Nov 19 09:37:14 2005 +0100 7901:aad88a902892
> 
> (XEN) Physical RAM map:
> (XEN)  0000000000000000 - 000000000009fc00 (usable)
> (XEN)  000000000009fc00 - 00000000000a0000 (reserved)
> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 00000000e8100000 (usable)
> (XEN)  00000000efff0000 - 00000000effff000 (ACPI data)
> (XEN)  00000000effff000 - 00000000f0000000 (ACPI NVS)
> (XEN)  00000000fee00000 - 00000000fee01000 (reserved)
> (XEN)  00000000fff80000 - 0000000100000000 (reserved)
> (XEN)  0000000100000000 - 0000000400000000 (usable)
> (XEN) System RAM: 16000MB (16384636kB)
> (XEN) Xen heap: 9MB (10124kB)
> (XEN) PAE enabled, limit: 16 GB
> (XEN) found SMP MP-table at 000ff780
> (XEN) DMI 2.3 present.
> (XEN) Using APIC driver default
> (XEN) ACPI: RSDP (v000 AMI                                   ) @ 0x000ff900
> (XEN) ACPI: RSDT (v001 RCC    GCHE     0x00000001 MSFT 0x01000000) @
0xefff0000
> (XEN) ACPI: FADT (v001 RCC    GCHE     0x00000001 MSFT 0x01000000) @
0xefff0030
> (XEN) ACPI: MADT (v001 RCC    GCHE     0x00000001 MSFT 0x01000000) @
0xefff00b0
> (XEN) ACPI: DSDT (v001    RCC     GCHE 0x00000100 MSFT 0x0100000d) @
0x00000000
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> (XEN) Processor #1 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> (XEN) Processor #2 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> (XEN) Processor #3 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
> (XEN) ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
> (XEN) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
> (XEN) ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
> (XEN) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) Enabling APIC mode:  Flat.  Using 3 I/O APICs
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Initializing CPU#0
> (XEN) Detected 1993.586 MHz processor.
> (XEN) Using scheduler: Simple EDF Scheduler (sedf)
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> (XEN) CPU: L2 cache: 512K
> (XEN) CPU: L3 cache: 1024K
> (XEN) CPU: Hyper-Threading is disabled
> (XEN) CPU0: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> (XEN) Booting processor 1/1 eip 90000
> (XEN) Initializing CPU#1
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> (XEN) CPU: L2 cache: 512K
> (XEN) CPU: L3 cache: 1024K
> (XEN) CPU: Hyper-Threading is disabled
> (XEN) CPU1: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> (XEN) Booting processor 2/2 eip 90000
> (XEN) Initializing CPU#2
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> (XEN) CPU: L2 cache: 512K
> (XEN) CPU: L3 cache: 1024K
> (XEN) CPU: Hyper-Threading is disabled
> (XEN) CPU2: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> (XEN) Booting processor 3/3 eip 90000
> (XEN) Initializing CPU#3
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> (XEN) CPU: L2 cache: 512K
> (XEN) CPU: L3 cache: 1024K
> (XEN) CPU: Hyper-Threading is disabled
> (XEN) CPU3: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> (XEN) Total of 4 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
> (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> (XEN) ...trying to set up timer (IRQ0) through the 8259A ...  failed.
> (XEN) ...trying to set up timer as Virtual Wire IRQ... works.
> (XEN) checking TSC synchronization across 4 CPUs: passed.
> (XEN) Platform timer is 1.193MHz PIT
> (XEN) Brought up 4 CPUs
> (XEN) mtrr: v2.0 (20020519)
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen-ELF header found:
>
''GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=yes,LOADER=generic''
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   0000000007800000->0000000008000000 (129024 pages
> to be allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN)  Loaded kernel: c0100000->c06205e4
> (XEN)  Init. ramdisk: c0621000->c06c2800
> (XEN)  Phys-Mach map: c06c3000->c0743000
> (XEN)  Start info:    c0743000->c0744000
> (XEN)  Page tables:   c0744000->c074d000
> (XEN)  Boot stack:    c074d000->c074e000
> (XEN)  TOTAL:         c0000000->c0800000
> (XEN)  ENTRY ADDRESS: c0100000
> (XEN) Initrd len 0xa1800, start at 0xc0621000
> (XEN) Scrubbing Free RAM:
>
....................................................................................................................................................................done.
> (XEN) Xen trace buffers: disabled
> (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three
times to switch
> input to Xen).
> (XEN) mtrr: type mismatch for fb000000,1000000 old: write-back new:
> write-combining
> (XEN) microcode: CPU1 updated from revision 0x13 to 0x2a, date = 08112004
> (XEN) microcode: CPU2 updated from revision 0x13 to 0x2a, date = 08112004
> (XEN) microcode: CPU3 updated from revision 0x13 to 0x2a, date = 08112004
> (XEN) microcode: CPU0 updated from revision 0x13 to 0x2a, date = 08112004
> 
> My Xend.log
> 
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:178)
> XendDomainInfo.create([''vm'', [''name'',
''xen01''], [''memory'',
''128''],
> [''image'', [''linux'',
[''kernel'', ''/boot/vmlinuz-2.6.12-xenU''],
> [''ramdisk'',
''/boot/initrd-2.6.12.6-xenU.img''], [''root'',
''/dev/sda1
> ro''], [''args'', ''4''],
[''vcpus'', ''1''], [''vcpus'',
''1''], [''boot'', ''c'']]],
> [''device'', [''vbd'',
[''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'',
> ''sda1''], [''mode'',
''w'']]], [''device'', [''vbd'',
[''uname'',
> ''phy:/dev/xensys01/xen01swap''], [''dev'',
''sda2''], [''mode'', ''w'']]],
> [''device'', [''vif'']]])
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:283)
> parseConfig: config is [''vm'', [''name'',
''xen01''], [''memory'',
''128''],
> [''image'', [''linux'',
[''kernel'', ''/boot/vmlinuz-2.6.12-xenU''],
> [''ramdisk'',
''/boot/initrd-2.6.12.6-xenU.img''], [''root'',
''/dev/sda1
> ro''], [''args'', ''4''],
[''vcpus'', ''1''], [''vcpus'',
''1''], [''boot'', ''c'']]],
> [''device'', [''vbd'',
[''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'',
> ''sda1''], [''mode'',
''w'']]], [''device'', [''vbd'',
[''uname'',
> ''phy:/dev/xensys01/xen01swap''], [''dev'',
''sda2''], [''mode'', ''w'']]],
> [''device'', [''vif'']]]
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:337)
> parseConfig: result is {''ssidref'': None,
''uuid'': None, ''on_crash'':
> None, ''on_reboot'': None, ''image'':
[''linux'', [''kernel'',
> ''/boot/vmlinuz-2.6.12-xenU''],
[''ramdisk'',
> ''/boot/initrd-2.6.12.6-xenU.img''],
[''root'', ''/dev/sda1 ro''],
[''args'',
> ''4''], [''vcpus'', ''1''],
[''vcpus'', ''1''], [''boot'',
''c'']], ''on_poweroff'':
> None, ''name'': ''xen01'',
''backend'': [], ''vcpus'': 1,
''cpu_weight'': None,
> ''vcpu_avail'': None, ''memory'': 128,
''device'': [(''vbd'', [''vbd'',
> [''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'', ''sda1''], [''mode'',
> ''w'']]), (''vbd'',
[''vbd'', [''uname'',
''phy:/dev/xensys01/xen01swap''],
> [''dev'', ''sda2''],
[''mode'', ''w'']]), (''vif'',
[''vif''])], ''bootloader'':
> None, ''cpu'': None, ''maxmem'': None}
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1065)
> XendDomainInfo.construct: None 0
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1097)
> XendDomainInfo.initDomain: 6 1.0
> [2005-11-21 18:27:20 xend] INFO (image:132) buildDomain os=linux dom=6
vcpus=1
> [2005-11-21 18:27:20 xend] DEBUG (image:170) dom            = 6
> [2005-11-21 18:27:20 xend] DEBUG (image:171) image          >
/boot/vmlinuz-2.6.12-xenU
> [2005-11-21 18:27:20 xend] DEBUG (image:172) store_evtchn   = 1
> [2005-11-21 18:27:20 xend] DEBUG (image:173) console_evtchn = 2
> [2005-11-21 18:27:20 xend] DEBUG (image:174) cmdline        = 
> root=/dev/sda1 ro 4
> [2005-11-21 18:27:20 xend] DEBUG (image:175) ramdisk        >
/boot/initrd-2.6.12.6-xenU.img
> [2005-11-21 18:27:20 xend] DEBUG (image:176) vcpus          = 1
> [2005-11-21 18:27:20 xend.XendDomainInfo] ERROR (XendDomainInfo:190)
> Domain construction failed
> Traceback (most recent call last):
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py",
> line 183, in create
>     vm.initDomain()
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py",
> line 1118, in initDomain
>     channel_details = self.image.createImage()
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
> line 115, in createImage
>     return self.createDomain()
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
> line 134, in createDomain
>     result = self.buildDomain()
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
> line 183, in buildDomain
>     ramdisk        = self.ramdisk)
> error: (22, ''Invalid argument'')
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1183)
> XendDomainInfo.destroy: domid=6
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1191)
> XendDomainInfo.destroyDomain(6)
> [2005-11-21 18:27:20 xend] ERROR (SrvBase:87) Request create failed.
> Traceback (most recent call last):
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/web/SrvBase.py",
> line 85, in perform
>     return op_method(op, req)
>   File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/server/SrvDomainDir.py",
> line 82, in op_create
>     raise XendError("Error creating domain: " + str(ex))
> XendError: Error creating domain: (22, ''Invalid
argument'')
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Andrew Turnbull

2005-Nov-21 20:48 UTC

head link

Re: [Xen-users] Error: Error creating domain: (22, ''Invalid argument'')

Hi

Thanks for your suggestions, but I tried

nic=0

and getting rid of the dev thing

but i still get the same error

it seems to point to

  File
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
line 183, in buildDomain
   ramdisk        = self.ramdisk)

Thanks

On 21/11/05, Steven Howe <howe.steven@gmail.com>
wrote:>  Hi Andrew,
>
>  try:
>  disk = [ ''phy:xensys01/xen01,sda1,w'',
> ''phy:xensys01/xen01swap,sda2,w'']
>  (note lack of ''dev'' entry. I think thats a built in)
>
>  Steven
>
>
>  On Mon, 2005-11-21 at 18:29 +0000, Andrew Turnbull wrote:
>  Hi there
>
> I get the following error message when i try to "xm create
<domid>"
>
> Error: Error creating domain: (22, ''Invalid argument'')
>
> I have included everything i can think of
>
> Thanks
>
>
> The DomU config is
>
> kernel = "/boot/vmlinuz-2.6.12-xenU"
> ramdisk = "/boot/initrd-2.6.12.6-xenU.img"
> memory = 128
> name = "xen01"
> nics=1
>
>
>
>
> root = "/dev/sda1 ro"
>
> My xm dmesg is
>
>  http://www.cl.cam.ac.uk/netos/xen
>  University of Cambridge Computer Laboratory
>
>  Xen version 3.0-devel (root@(none)) (gcc version 3.4.4 20050721 (Red
> Hat 3.4.4-2)) Sun Nov 20 17:49:04 GMT 2005
>  Latest ChangeSet: Sat Nov 19 09:37:14 2005 +0100 7901:aad88a902892
>
> (XEN) Physical RAM map:
> (XEN) 0000000000000000 - 000000000009fc00 (usable)
> (XEN) 000000000009fc00 - 00000000000a0000 (reserved)
> (XEN) 00000000000e0000 - 0000000000100000 (reserved)
> (XEN) 0000000000100000 - 00000000e8100000 (usable)
> (XEN) 00000000efff0000 - 00000000effff000 (ACPI data)
> (XEN) 00000000effff000 - 00000000f0000000 (ACPI NVS)
> (XEN) 00000000fee00000 - 00000000fee01000 (reserved)
> (XEN) 00000000fff80000 - 0000000100000000 (reserved)
> (XEN) 0000000100000000 - 0000000400000000 (usable)
> (XEN) System RAM: 16000MB (16384636kB)
> (XEN) Xen heap: 9MB (10124kB)
> (XEN) PAE enabled, limit: 16 GB
> (XEN) found SMP MP-table at 000ff780
> (XEN) DMI 2.3 present.
> (XEN) Using APIC driver default
> (XEN) ACPI: RSDP (v000 AMI ) @ 0x000ff900
> (XEN) ACPI: RSDT (v001 RCC GCHE 0x00000001 MSFT 0x01000000) @ 0xefff0000
> (XEN) ACPI: FADT (v001 RCC GCHE 0x00000001 MSFT 0x01000000) @ 0xefff0030
> (XEN) ACPI: MADT (v001 RCC GCHE 0x00000001 MSFT 0x01000000) @ 0xefff00b0
> (XEN) ACPI: DSDT (v001 RCC GCHE 0x00000100 MSFT 0x0100000d) @ 0x00000000
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> (XEN) Processor #1 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> (XEN) Processor #2 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> (XEN) Processor #3 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
> (XEN) ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
> (XEN) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
> (XEN) ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
> (XEN) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Initializing CPU#0
> (XEN) Detected 1993.586 MHz processor.
> (XEN) Using scheduler: Simple EDF Scheduler (sedf)
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> (XEN) CPU: L2 cache: 512K
> (XEN) CPU: L3 cache: 1024K
> (XEN) CPU: Hyper-Threading is disabled
> (XEN) CPU0: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> (XEN) Booting processor 1/1 eip 90000
> (XEN) Initializing CPU#1
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> (XEN) CPU: L2 cache: 512K
> (XEN) CPU: L3 cache: 1024K
> (XEN) CPU: Hyper-Threading is disabled
> (XEN) CPU1: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> (XEN) Booting processor 2/2 eip 90000
> (XEN) Initializing CPU#2
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> (XEN) CPU: L2 cache: 512K
> (XEN) CPU: L3 cache: 1024K
> (XEN) CPU: Hyper-Threading is disabled
> (XEN) CPU2: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> (XEN) Booting processor 3/3 eip 90000
> (XEN) Initializing CPU#3
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
> (XEN) CPU: L2 cache: 512K
> (XEN) CPU: L3 cache: 1024K
> (XEN) CPU: Hyper-Threading is disabled
> (XEN) CPU3: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
> (XEN) Total of 4 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
> (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> (XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed.
> (XEN) ...trying to set up timer as Virtual Wire IRQ... works.
> (XEN) checking TSC synchronization across 4 CPUs: passed.
> (XEN) Platform timer is 1.193MHz PIT
> (XEN) Brought up 4 CPUs
> (XEN) mtrr: v2.0 (20020519)
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen-ELF header found:
>
''GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=yes,LOADER=generic''
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN) Dom0 alloc.: 0000000007800000->0000000008000000
> (129024 pages
> to be allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN) Loaded kernel: c0100000->c06205e4
> (XEN) Init. ramdisk: c0621000->c06c2800
> (XEN) Phys-Mach map: c06c3000->c0743000
> (XEN) Start info: c0743000->c0744000
> (XEN) Page tables: c0744000->c074d000
> (XEN) Boot stack: c074d000->c074e000
> (XEN) TOTAL: c0000000->c0800000
> (XEN) ENTRY ADDRESS: c0100000
> (XEN) Initrd len 0xa1800, start at 0xc0621000
> (XEN) Scrubbing Free RAM:
>
....................................................................................................................................................................done.
> (XEN) Xen trace buffers: disabled
> (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three
times to switch
> input to Xen).
> (XEN) mtrr: type mismatch for fb000000,1000000 old: write-back new:
> write-combining
> (XEN) microcode: CPU1 updated from revision 0x13 to 0x2a, date = 08112004
> (XEN) microcode: CPU2 updated from revision 0x13 to 0x2a, date = 08112004
> (XEN) microcode: CPU3 updated from revision 0x13 to 0x2a, date = 08112004
> (XEN) microcode: CPU0 updated from revision 0x13 to 0x2a, date = 08112004
>
> My Xend.log
>
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:178)
> XendDomainInfo.create([''vm'', [''name'',
''xen01''], [''memory'',
''128''],
> [''image'', [''linux'',
[''kernel'', ''/boot/vmlinuz-2.6.12-xenU''],
> [''ramdisk'',
''/boot/initrd-2.6.12.6-xenU.img''], [''root'',
''/dev/sda1
> ro''], [''args'', ''4''],
[''vcpus'', ''1''], [''vcpus'',
''1''], [''boot'', ''c'']]],
> [''device'', [''vbd'',
[''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'',
> ''sda1''], [''mode'',
''w'']]], [''device'', [''vbd'',
[''uname'',
> ''phy:/dev/xensys01/xen01swap''], [''dev'',
''sda2''], [''mode'', ''w'']]],
> [''device'', [''vif'']]])
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:283)
> parseConfig: config is [''vm'', [''name'',
''xen01''], [''memory'',
''128''],
> [''image'', [''linux'',
[''kernel'', ''/boot/vmlinuz-2.6.12-xenU''],
> [''ramdisk'',
''/boot/initrd-2.6.12.6-xenU.img''], [''root'',
''/dev/sda1
> ro''], [''args'', ''4''],
[''vcpus'', ''1''], [''vcpus'',
''1''], [''boot'', ''c'']]],
> [''device'', [''vbd'',
[''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'',
> ''sda1''], [''mode'',
''w'']]], [''device'', [''vbd'',
[''uname'',
> ''phy:/dev/xensys01/xen01swap''], [''dev'',
''sda2''], [''mode'', ''w'']]],
> [''device'', [''vif'']]]
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:337)
> parseConfig: result is {''ssidref'': None,
''uuid'': None, ''on_crash'':
> None, ''on_reboot'': None, ''image'':
[''linux'', [''kernel'',
> ''/boot/vmlinuz-2.6.12-xenU''],
[''ramdisk'',
> ''/boot/initrd-2.6.12.6-xenU.img''],
[''root'', ''/dev/sda1 ro''],
[''args'',
> ''4''], [''vcpus'', ''1''],
[''vcpus'', ''1''], [''boot'',
''c'']], ''on_poweroff'':
> None, ''name'': ''xen01'',
''backend'': [], ''vcpus'': 1,
''cpu_weight'': None,
> ''vcpu_avail'': None, ''memory'': 128,
''device'': [(''vbd'', [''vbd'',
> [''uname'', ''phy:/dev/xensys01/xen01''],
[''dev'', ''sda1''], [''mode'',
> ''w'']]), (''vbd'',
[''vbd'', [''uname'',
''phy:/dev/xensys01/xen01swap''],
> [''dev'', ''sda2''],
[''mode'', ''w'']]), (''vif'',
[''vif''])], ''bootloader'':
> None, ''cpu'': None, ''maxmem'': None}
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1065)
> XendDomainInfo.construct: None 0
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1097)
> XendDomainInfo.initDomain: 6 1.0
> [2005-11-21 18:27:20 xend] INFO (image:132) buildDomain os=linux dom=6
> vcpus=1
> [2005-11-21 18:27:20 xend] DEBUG (image:170) dom = 6
> [2005-11-21 18:27:20 xend] DEBUG (image:171) image >
/boot/vmlinuz-2.6.12-xenU
> [2005-11-21 18:27:20 xend] DEBUG (image:172) store_evtchn = 1
> [2005-11-21 18:27:20 xend] DEBUG (image:173) console_evtchn = 2
> [2005-11-21 18:27:20 xend] DEBUG (image:174) cmdline > root=/dev/sda1 ro
4
> [2005-11-21 18:27:20 xend] DEBUG (image:175) ramdisk >
/boot/initrd-2.6.12.6-xenU.img
> [2005-11-21 18:27:20 xend] DEBUG (image:176) vcpus = 1
> [2005-11-21 18:27:20 xend.XendDomainInfo] ERROR (XendDomainInfo:190)
> Domain construction failed
> Traceback (most recent call last):
>  File
>
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py",
> line 183, in create
>  vm.initDomain()
>  File
>
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py",
> line 1118, in initDomain
>  channel_details = self.image.createImage()
>  File
>
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
> line 115, in createImage
>  return self.createDomain()
>  File
>
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
> line 134, in createDomain
>  result = self.buildDomain()
>  File
>
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/image.py",
> line 183, in buildDomain
>  ramdisk = self.ramdisk)
> error: (22, ''Invalid argument'')
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1183)
> XendDomainInfo.destroy: domid=6
> [2005-11-21 18:27:20 xend.XendDomainInfo] DEBUG (XendDomainInfo:1191)
> XendDomainInfo.destroyDomain(6)
> [2005-11-21 18:27:20 xend] ERROR (SrvBase:87) Request create failed.
> Traceback (most recent call last):
>  File
>
"/root/xen-unstable/dist/install/usr/lib/python/xen/web/SrvBase.py",
> line 85, in perform
>  return op_method(op, req)
>  File
>
"/root/xen-unstable/dist/install/usr/lib/python/xen/xend/server/SrvDomainDir.py",
> line 82, in op_create
>  raise XendError("Error creating domain: " + str(ex))
> XendError: Error creating domain: (22, ''Invalid
argument'')
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
>
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Apparently Analagous Threads

Search for more maybe matching threads

Xen users - Nov 2005 - Error: Error creating domain: (22, ''Invalid argument'')

[Xen-users] Error: Error creating domain: (22, ''Invalid argument'')

Re: [Xen-users] Error: Error creating domain: (22, ''Invalid argument'')

Re: [Xen-users] Error: Error creating domain: (22, ''Invalid argument'')

Re: [Xen-users] Error: Error creating domain: (22, ''Invalid argument'')

Re: [Xen-users] Error: Error creating domain: (22, ''Invalid argument'')

Re: [Xen-users] Error: Error creating domain: (22, ''Invalid argument'')

Apparently Analagous Threads