Jeremy Fitzhardinge
2013-Nov-19 17:57 UTC
Xen S3 host resume: "Interrupts enabled after xen_acpi_processor_resume+0x0/0x34"
After an S3 host resume, I''m seeing: [48002.772629] ACPI: Low-level resume complete [48002.772802] PM: Restoring platform NVS memory [48002.776143] xen_acpi_processor: Uploading Xen processor PM info [48002.776691] ------------[ cut here ]------------ [48002.776712] WARNING: CPU: 0 PID: 10235 at drivers/base/syscore.c:104 syscore_resume+0x9a/0xe0() [48002.776751] Interrupts enabled after xen_acpi_processor_resume+0x0/0x34 [xen_acpi_processor] [48002.776836] Modules linked in: tcp_lp btrfs zlib_deflate raid6_pq xor ufs hfsplus hfs minix vfat msdos fat jfs xfs libcrc32c reiserfs xt_CHECKSUM tun hidp fuse nf_conntrack_ netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT xt_conntrack ebtable_nat eb table_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_de frag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6 _tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ipt able_mangle iptable_security iptable_raw rfcomm bnep snd_hda_codec_hdmi snd_hda_codec_co nexant iTCO_wdt iTCO_vendor_support arc4 x86_pkg_temp_thermal coretemp iwldvm microcode btusb snd_hda_intel mac80211 bluetooth joydev snd_hda_codec snd_hwdep snd_seq serio_raw iwlwifi i2c_i801 snd_seq_device [48002.776894] snd_pcm cfg80211 sdhci_pci sdhci mmc_core thinkpad_acpi wmi tpm_tis e100 0e rfkill snd_page_alloc tpm tpm_bios snd_timer ptp snd mei_me mei soundcore shpchp lpc_ ich pps_core mfd_core mperf xen_acpi_processor xen_netback xen_blkback xen_gntdev xen_ev tchn xenfs xen_privcmd uinput binfmt_misc nfsd auth_rpcgss nfs_acl lockd sunrpc dm_crypt crc32_pclmul crc32c_intel i915 ghash_clmulni_intel i2c_algo_bit drm_kms_helper drm i2c_ core video [48002.776903] CPU: 0 PID: 10235 Comm: systemd-sleep Not tainted 3.11.7-200.fc19.x86_64 #1 [48002.776905] Hardware name: LENOVO 4286CTO/4286CTO, BIOS 8DET59WW (1.29 ) 04/02/2012 [48002.776917] 0000000000000009 ffff8801c7697d30 ffffffff8164777b ffff8801c7697d78 [48002.776924] ffff8801c7697d68 ffffffff8106715d ffffffffa01f6000 0000000000000003 [48002.776931] ffff8801c7697e08 ffff8801fd970000 0000000000000000 ffff8801c7697dc8 [48002.776933] Call Trace: [48002.776949] [<ffffffff8164777b>] dump_stack+0x45/0x56 [48002.776959] [<ffffffff8106715d>] warn_slowpath_common+0x7d/0xa0 [48002.776972] [<ffffffff810671cc>] warn_slowpath_fmt+0x4c/0x50 [48002.776989] [<ffffffffa01f4bb0>] ? xen_upload_processor_pm_data+0x300/0x300 [xen_acpi_processor] [48002.776996] [<ffffffff813f252a>] syscore_resume+0x9a/0xe0 [48002.777006] [<ffffffff810abd7c>] suspend_devices_and_enter+0x40c/0x480 [48002.777014] [<ffffffff810abf68>] pm_suspend+0x178/0x260 [48002.777020] [<ffffffff810aae19>] state_store+0x79/0xf0 [48002.777033] [<ffffffff812fc4af>] kobj_attr_store+0xf/0x20 [48002.777043] [<ffffffff8121a226>] sysfs_write_file+0xc6/0x140 [48002.777054] [<ffffffff811a819d>] vfs_write+0xbd/0x1e0 [48002.777062] [<ffffffff811a8bd9>] SyS_write+0x49/0xa0 [48002.777073] [<ffffffff81656999>] system_call_fastpath+0x16/0x1b [48002.777077] ---[ end trace 15c5658c596be9f3 ]--- [48002.777081] Enabling non-boot CPUs ... I wonder if this is a result of upload_pm_data()''s use of mutexes, which being a sleeping synchronization operation, shouldn''t be done in an interrupt-off context. I''m also having the machine hang in the suspended state on resume sometimes (that is, I open the lid/hit a key/press power to resume the laptop, but the sleep light keeps pulsing and I can''t get it out of that state without a forced power-off. I wonder if these are related. This is with the stock Fedora 19 kernel, but I don''t think there are any differences from upstream in this area? Thanks, J
Ben Guthro
2013-Nov-19 19:34 UTC
Re: Xen S3 host resume: "Interrupts enabled after xen_acpi_processor_resume+0x0/0x34"
On Tue, Nov 19, 2013 at 12:57 PM, Jeremy Fitzhardinge <jeremy@goop.org>wrote:> After an S3 host resume, I''m seeing: > > [48002.772629] ACPI: Low-level resume complete > [48002.772802] PM: Restoring platform NVS memory > [48002.776143] xen_acpi_processor: Uploading Xen processor PM info > [48002.776691] ------------[ cut here ]------------ > [48002.776712] WARNING: CPU: 0 PID: 10235 at drivers/base/syscore.c:104 > syscore_resume+0x9a/0xe0() > [48002.776751] Interrupts enabled after xen_acpi_processor_resume+0x0/0x34 > [xen_acpi_processor] > [48002.776836] Modules linked in: tcp_lp btrfs zlib_deflate raid6_pq xor > ufs hfsplus hfs > minix vfat msdos fat jfs xfs libcrc32c reiserfs xt_CHECKSUM tun hidp fuse > nf_conntrack_ > netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT xt_conntrack > ebtable_nat eb > table_broute bridge stp llc ebtable_filter ebtables ip6table_nat > nf_conntrack_ipv6 nf_de > frag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw > ip6table_filter ip6 > _tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat > nf_conntrack ipt > able_mangle iptable_security iptable_raw rfcomm bnep snd_hda_codec_hdmi > snd_hda_codec_co > nexant iTCO_wdt iTCO_vendor_support arc4 x86_pkg_temp_thermal coretemp > iwldvm microcode > btusb snd_hda_intel mac80211 bluetooth joydev snd_hda_codec snd_hwdep > snd_seq serio_raw > iwlwifi i2c_i801 snd_seq_device > [48002.776894] snd_pcm cfg80211 sdhci_pci sdhci mmc_core thinkpad_acpi > wmi tpm_tis e100 > 0e rfkill snd_page_alloc tpm tpm_bios snd_timer ptp snd mei_me mei > soundcore shpchp lpc_ > ich pps_core mfd_core mperf xen_acpi_processor xen_netback xen_blkback > xen_gntdev xen_ev > tchn xenfs xen_privcmd uinput binfmt_misc nfsd auth_rpcgss nfs_acl lockd > sunrpc dm_crypt > crc32_pclmul crc32c_intel i915 ghash_clmulni_intel i2c_algo_bit > drm_kms_helper drm i2c_ > core video > [48002.776903] CPU: 0 PID: 10235 Comm: systemd-sleep Not tainted > 3.11.7-200.fc19.x86_64 #1 > [48002.776905] Hardware name: LENOVO 4286CTO/4286CTO, BIOS 8DET59WW (1.29 > ) 04/02/2012 > [48002.776917] 0000000000000009 ffff8801c7697d30 ffffffff8164777b > ffff8801c7697d78 > [48002.776924] ffff8801c7697d68 ffffffff8106715d ffffffffa01f6000 > 0000000000000003 > [48002.776931] ffff8801c7697e08 ffff8801fd970000 0000000000000000 > ffff8801c7697dc8 > [48002.776933] Call Trace: > [48002.776949] [<ffffffff8164777b>] dump_stack+0x45/0x56 > [48002.776959] [<ffffffff8106715d>] warn_slowpath_common+0x7d/0xa0 > [48002.776972] [<ffffffff810671cc>] warn_slowpath_fmt+0x4c/0x50 > [48002.776989] [<ffffffffa01f4bb0>] ? > xen_upload_processor_pm_data+0x300/0x300 [xen_acpi_processor] > [48002.776996] [<ffffffff813f252a>] syscore_resume+0x9a/0xe0 > [48002.777006] [<ffffffff810abd7c>] suspend_devices_and_enter+0x40c/0x480 > [48002.777014] [<ffffffff810abf68>] pm_suspend+0x178/0x260 > [48002.777020] [<ffffffff810aae19>] state_store+0x79/0xf0 > [48002.777033] [<ffffffff812fc4af>] kobj_attr_store+0xf/0x20 > [48002.777043] [<ffffffff8121a226>] sysfs_write_file+0xc6/0x140 > [48002.777054] [<ffffffff811a819d>] vfs_write+0xbd/0x1e0 > [48002.777062] [<ffffffff811a8bd9>] SyS_write+0x49/0xa0 > [48002.777073] [<ffffffff81656999>] system_call_fastpath+0x16/0x1b > [48002.777077] ---[ end trace 15c5658c596be9f3 ]--- > [48002.777081] Enabling non-boot CPUs ... > > > I wonder if this is a result of upload_pm_data()''s use of mutexes, which > being a sleeping synchronization operation, shouldn''t be done in an > interrupt-off context. > > I''m also having the machine hang in the suspended state on resume > sometimes (that is, I open the lid/hit a key/press power to resume the > laptop, but the sleep light keeps pulsing and I can''t get it out of that > state without a forced power-off. I wonder if these are related. > > This is with the stock Fedora 19 kernel, but I don''t think there are any > differences from upstream in this area? >There was a commit in 3.12 to handle systems with reduced hardware sleep - but that would be a failure 100% of the time - not intermittent. What version of Xen are you running? Ben> > Thanks, > J > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
Konrad Rzeszutek Wilk
2013-Nov-19 19:44 UTC
Re: Xen S3 host resume: "Interrupts enabled after xen_acpi_processor_resume+0x0/0x34"
On Tue, Nov 19, 2013 at 02:34:21PM -0500, Ben Guthro wrote:> On Tue, Nov 19, 2013 at 12:57 PM, Jeremy Fitzhardinge <jeremy@goop.org>wrote: > > > After an S3 host resume, I''m seeing: > > > > [48002.772629] ACPI: Low-level resume complete > > [48002.772802] PM: Restoring platform NVS memory > > [48002.776143] xen_acpi_processor: Uploading Xen processor PM info > > [48002.776691] ------------[ cut here ]------------ > > [48002.776712] WARNING: CPU: 0 PID: 10235 at drivers/base/syscore.c:104 > > syscore_resume+0x9a/0xe0() > > [48002.776751] Interrupts enabled after xen_acpi_processor_resume+0x0/0x34 > > [xen_acpi_processor] > > [48002.776836] Modules linked in: tcp_lp btrfs zlib_deflate raid6_pq xor > > ufs hfsplus hfs > > minix vfat msdos fat jfs xfs libcrc32c reiserfs xt_CHECKSUM tun hidp fuse > > nf_conntrack_ > > netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT xt_conntrack > > ebtable_nat eb > > table_broute bridge stp llc ebtable_filter ebtables ip6table_nat > > nf_conntrack_ipv6 nf_de > > frag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw > > ip6table_filter ip6 > > _tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat > > nf_conntrack ipt > > able_mangle iptable_security iptable_raw rfcomm bnep snd_hda_codec_hdmi > > snd_hda_codec_co > > nexant iTCO_wdt iTCO_vendor_support arc4 x86_pkg_temp_thermal coretemp > > iwldvm microcode > > btusb snd_hda_intel mac80211 bluetooth joydev snd_hda_codec snd_hwdep > > snd_seq serio_raw > > iwlwifi i2c_i801 snd_seq_device > > [48002.776894] snd_pcm cfg80211 sdhci_pci sdhci mmc_core thinkpad_acpi > > wmi tpm_tis e100 > > 0e rfkill snd_page_alloc tpm tpm_bios snd_timer ptp snd mei_me mei > > soundcore shpchp lpc_ > > ich pps_core mfd_core mperf xen_acpi_processor xen_netback xen_blkback > > xen_gntdev xen_ev > > tchn xenfs xen_privcmd uinput binfmt_misc nfsd auth_rpcgss nfs_acl lockd > > sunrpc dm_crypt > > crc32_pclmul crc32c_intel i915 ghash_clmulni_intel i2c_algo_bit > > drm_kms_helper drm i2c_ > > core video > > [48002.776903] CPU: 0 PID: 10235 Comm: systemd-sleep Not tainted > > 3.11.7-200.fc19.x86_64 #1 > > [48002.776905] Hardware name: LENOVO 4286CTO/4286CTO, BIOS 8DET59WW (1.29 > > ) 04/02/2012 > > [48002.776917] 0000000000000009 ffff8801c7697d30 ffffffff8164777b > > ffff8801c7697d78 > > [48002.776924] ffff8801c7697d68 ffffffff8106715d ffffffffa01f6000 > > 0000000000000003 > > [48002.776931] ffff8801c7697e08 ffff8801fd970000 0000000000000000 > > ffff8801c7697dc8 > > [48002.776933] Call Trace: > > [48002.776949] [<ffffffff8164777b>] dump_stack+0x45/0x56 > > [48002.776959] [<ffffffff8106715d>] warn_slowpath_common+0x7d/0xa0 > > [48002.776972] [<ffffffff810671cc>] warn_slowpath_fmt+0x4c/0x50 > > [48002.776989] [<ffffffffa01f4bb0>] ? > > xen_upload_processor_pm_data+0x300/0x300 [xen_acpi_processor] > > [48002.776996] [<ffffffff813f252a>] syscore_resume+0x9a/0xe0 > > [48002.777006] [<ffffffff810abd7c>] suspend_devices_and_enter+0x40c/0x480 > > [48002.777014] [<ffffffff810abf68>] pm_suspend+0x178/0x260 > > [48002.777020] [<ffffffff810aae19>] state_store+0x79/0xf0 > > [48002.777033] [<ffffffff812fc4af>] kobj_attr_store+0xf/0x20 > > [48002.777043] [<ffffffff8121a226>] sysfs_write_file+0xc6/0x140 > > [48002.777054] [<ffffffff811a819d>] vfs_write+0xbd/0x1e0 > > [48002.777062] [<ffffffff811a8bd9>] SyS_write+0x49/0xa0 > > [48002.777073] [<ffffffff81656999>] system_call_fastpath+0x16/0x1b > > [48002.777077] ---[ end trace 15c5658c596be9f3 ]--- > > [48002.777081] Enabling non-boot CPUs ... > > > > > > I wonder if this is a result of upload_pm_data()''s use of mutexes, which > > being a sleeping synchronization operation, shouldn''t be done in an > > interrupt-off context. > > > > I''m also having the machine hang in the suspended state on resume > > sometimes (that is, I open the lid/hit a key/press power to resume the > > laptop, but the sleep light keeps pulsing and I can''t get it out of that > > state without a forced power-off. I wonder if these are related. > > > > This is with the stock Fedora 19 kernel, but I don''t think there are any > > differences from upstream in this area? > > > > There was a commit in 3.12 to handle systems with reduced hardware sleep - > but that would be a failure 100% of the time - not intermittent. > What version of Xen are you running?I saw that on Xen 4.3 (or Xen 4.2) but when I upgraded to Xen 4.4 I didn''t see it anymore. Hence I was thinking it was Xen related.
Ben Guthro
2013-Nov-19 19:52 UTC
Re: Xen S3 host resume: "Interrupts enabled after xen_acpi_processor_resume+0x0/0x34"
On Tue, Nov 19, 2013 at 2:44 PM, Konrad Rzeszutek Wilk < konrad.wilk@oracle.com> wrote:> On Tue, Nov 19, 2013 at 02:34:21PM -0500, Ben Guthro wrote: > > On Tue, Nov 19, 2013 at 12:57 PM, Jeremy Fitzhardinge <jeremy@goop.org > >wrote: > > > > > After an S3 host resume, I''m seeing: > > > > > > [48002.772629] ACPI: Low-level resume complete > > > [48002.772802] PM: Restoring platform NVS memory > > > [48002.776143] xen_acpi_processor: Uploading Xen processor PM info > > > [48002.776691] ------------[ cut here ]------------ > > > [48002.776712] WARNING: CPU: 0 PID: 10235 at drivers/base/syscore.c:104 > > > syscore_resume+0x9a/0xe0() > > > [48002.776751] Interrupts enabled after > xen_acpi_processor_resume+0x0/0x34 > > > [xen_acpi_processor] > > > [48002.776836] Modules linked in: tcp_lp btrfs zlib_deflate raid6_pq > xor > > > ufs hfsplus hfs > > > minix vfat msdos fat jfs xfs libcrc32c reiserfs xt_CHECKSUM tun hidp > fuse > > > nf_conntrack_ > > > netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT > xt_conntrack > > > ebtable_nat eb > > > table_broute bridge stp llc ebtable_filter ebtables ip6table_nat > > > nf_conntrack_ipv6 nf_de > > > frag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw > > > ip6table_filter ip6 > > > _tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat > > > nf_conntrack ipt > > > able_mangle iptable_security iptable_raw rfcomm bnep snd_hda_codec_hdmi > > > snd_hda_codec_co > > > nexant iTCO_wdt iTCO_vendor_support arc4 x86_pkg_temp_thermal coretemp > > > iwldvm microcode > > > btusb snd_hda_intel mac80211 bluetooth joydev snd_hda_codec snd_hwdep > > > snd_seq serio_raw > > > iwlwifi i2c_i801 snd_seq_device > > > [48002.776894] snd_pcm cfg80211 sdhci_pci sdhci mmc_core thinkpad_acpi > > > wmi tpm_tis e100 > > > 0e rfkill snd_page_alloc tpm tpm_bios snd_timer ptp snd mei_me mei > > > soundcore shpchp lpc_ > > > ich pps_core mfd_core mperf xen_acpi_processor xen_netback xen_blkback > > > xen_gntdev xen_ev > > > tchn xenfs xen_privcmd uinput binfmt_misc nfsd auth_rpcgss nfs_acl > lockd > > > sunrpc dm_crypt > > > crc32_pclmul crc32c_intel i915 ghash_clmulni_intel i2c_algo_bit > > > drm_kms_helper drm i2c_ > > > core video > > > [48002.776903] CPU: 0 PID: 10235 Comm: systemd-sleep Not tainted > > > 3.11.7-200.fc19.x86_64 #1 > > > [48002.776905] Hardware name: LENOVO 4286CTO/4286CTO, BIOS 8DET59WW > (1.29 > > > ) 04/02/2012 > > > [48002.776917] 0000000000000009 ffff8801c7697d30 ffffffff8164777b > > > ffff8801c7697d78 > > > [48002.776924] ffff8801c7697d68 ffffffff8106715d ffffffffa01f6000 > > > 0000000000000003 > > > [48002.776931] ffff8801c7697e08 ffff8801fd970000 0000000000000000 > > > ffff8801c7697dc8 > > > [48002.776933] Call Trace: > > > [48002.776949] [<ffffffff8164777b>] dump_stack+0x45/0x56 > > > [48002.776959] [<ffffffff8106715d>] warn_slowpath_common+0x7d/0xa0 > > > [48002.776972] [<ffffffff810671cc>] warn_slowpath_fmt+0x4c/0x50 > > > [48002.776989] [<ffffffffa01f4bb0>] ? > > > xen_upload_processor_pm_data+0x300/0x300 [xen_acpi_processor] > > > [48002.776996] [<ffffffff813f252a>] syscore_resume+0x9a/0xe0 > > > [48002.777006] [<ffffffff810abd7c>] > suspend_devices_and_enter+0x40c/0x480 > > > [48002.777014] [<ffffffff810abf68>] pm_suspend+0x178/0x260 > > > [48002.777020] [<ffffffff810aae19>] state_store+0x79/0xf0 > > > [48002.777033] [<ffffffff812fc4af>] kobj_attr_store+0xf/0x20 > > > [48002.777043] [<ffffffff8121a226>] sysfs_write_file+0xc6/0x140 > > > [48002.777054] [<ffffffff811a819d>] vfs_write+0xbd/0x1e0 > > > [48002.777062] [<ffffffff811a8bd9>] SyS_write+0x49/0xa0 > > > [48002.777073] [<ffffffff81656999>] system_call_fastpath+0x16/0x1b > > > [48002.777077] ---[ end trace 15c5658c596be9f3 ]--- > > > [48002.777081] Enabling non-boot CPUs ... > > > > > > > > > I wonder if this is a result of upload_pm_data()''s use of mutexes, > which > > > being a sleeping synchronization operation, shouldn''t be done in an > > > interrupt-off context. > > > > > > I''m also having the machine hang in the suspended state on resume > > > sometimes (that is, I open the lid/hit a key/press power to resume the > > > laptop, but the sleep light keeps pulsing and I can''t get it out of > that > > > state without a forced power-off. I wonder if these are related. > > > > > > This is with the stock Fedora 19 kernel, but I don''t think there are > any > > > differences from upstream in this area? > > > > > > > There was a commit in 3.12 to handle systems with reduced hardware sleep > - > > but that would be a failure 100% of the time - not intermittent. > > What version of Xen are you running? > > I saw that on Xen 4.3 (or Xen 4.2) but when I upgraded to Xen 4.4 I didn''t > see > it anymore. Hence I was thinking it was Xen related. >The following xen commits were done in this timeframe that could be related, depending on what Xen version you are running: http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=6e96c186d23873597896051b043cfeb119c4a7d5 http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=9aa356bc9f7533c3cb7f02c823f532532876d444 http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=9e2c5938246546a5b3f698b7421640d85602b994 http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=529d5731e40e179e396397c633e10316a850044e _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
Jeremy Fitzhardinge
2013-Nov-21 21:10 UTC
Re: Xen S3 host resume: "Interrupts enabled after xen_acpi_processor_resume+0x0/0x34"
On 11/19/2013 11:52 AM, Ben Guthro wrote:> > > > On Tue, Nov 19, 2013 at 2:44 PM, Konrad Rzeszutek Wilk > <konrad.wilk@oracle.com <mailto:konrad.wilk@oracle.com>> wrote: > > On Tue, Nov 19, 2013 at 02:34:21PM -0500, Ben Guthro wrote: > > On Tue, Nov 19, 2013 at 12:57 PM, Jeremy Fitzhardinge > <jeremy@goop.org <mailto:jeremy@goop.org>>wrote: > > > > > After an S3 host resume, I''m seeing: > > > > > > [48002.772629] ACPI: Low-level resume complete > > > [48002.772802] PM: Restoring platform NVS memory > > > [48002.776143] xen_acpi_processor: Uploading Xen processor PM info > > > [48002.776691] ------------[ cut here ]------------ > > > [48002.776712] WARNING: CPU: 0 PID: 10235 at > drivers/base/syscore.c:104 > > > syscore_resume+0x9a/0xe0() > > > [48002.776751] Interrupts enabled after > xen_acpi_processor_resume+0x0/0x34 > > > [xen_acpi_processor] > > > [48002.776836] Modules linked in: tcp_lp btrfs zlib_deflate > raid6_pq xor > > > ufs hfsplus hfs > > > minix vfat msdos fat jfs xfs libcrc32c reiserfs xt_CHECKSUM > tun hidp fuse > > > nf_conntrack_ > > > netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT > xt_conntrack > > > ebtable_nat eb > > > table_broute bridge stp llc ebtable_filter ebtables ip6table_nat > > > nf_conntrack_ipv6 nf_de > > > frag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security > ip6table_raw > > > ip6table_filter ip6 > > > _tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 > nf_nat_ipv4 nf_nat > > > nf_conntrack ipt > > > able_mangle iptable_security iptable_raw rfcomm bnep > snd_hda_codec_hdmi > > > snd_hda_codec_co > > > nexant iTCO_wdt iTCO_vendor_support arc4 x86_pkg_temp_thermal > coretemp > > > iwldvm microcode > > > btusb snd_hda_intel mac80211 bluetooth joydev snd_hda_codec > snd_hwdep > > > snd_seq serio_raw > > > iwlwifi i2c_i801 snd_seq_device > > > [48002.776894] snd_pcm cfg80211 sdhci_pci sdhci mmc_core > thinkpad_acpi > > > wmi tpm_tis e100 > > > 0e rfkill snd_page_alloc tpm tpm_bios snd_timer ptp snd mei_me mei > > > soundcore shpchp lpc_ > > > ich pps_core mfd_core mperf xen_acpi_processor xen_netback > xen_blkback > > > xen_gntdev xen_ev > > > tchn xenfs xen_privcmd uinput binfmt_misc nfsd auth_rpcgss > nfs_acl lockd > > > sunrpc dm_crypt > > > crc32_pclmul crc32c_intel i915 ghash_clmulni_intel i2c_algo_bit > > > drm_kms_helper drm i2c_ > > > core video > > > [48002.776903] CPU: 0 PID: 10235 Comm: systemd-sleep Not tainted > > > 3.11.7-200.fc19.x86_64 #1 > > > [48002.776905] Hardware name: LENOVO 4286CTO/4286CTO, BIOS > 8DET59WW (1.29 > > > ) 04/02/2012 > > > [48002.776917] 0000000000000009 ffff8801c7697d30 ffffffff8164777b > > > ffff8801c7697d78 > > > [48002.776924] ffff8801c7697d68 ffffffff8106715d ffffffffa01f6000 > > > 0000000000000003 > > > [48002.776931] ffff8801c7697e08 ffff8801fd970000 0000000000000000 > > > ffff8801c7697dc8 > > > [48002.776933] Call Trace: > > > [48002.776949] [<ffffffff8164777b>] dump_stack+0x45/0x56 > > > [48002.776959] [<ffffffff8106715d>] > warn_slowpath_common+0x7d/0xa0 > > > [48002.776972] [<ffffffff810671cc>] warn_slowpath_fmt+0x4c/0x50 > > > [48002.776989] [<ffffffffa01f4bb0>] ? > > > xen_upload_processor_pm_data+0x300/0x300 [xen_acpi_processor] > > > [48002.776996] [<ffffffff813f252a>] syscore_resume+0x9a/0xe0 > > > [48002.777006] [<ffffffff810abd7c>] > suspend_devices_and_enter+0x40c/0x480 > > > [48002.777014] [<ffffffff810abf68>] pm_suspend+0x178/0x260 > > > [48002.777020] [<ffffffff810aae19>] state_store+0x79/0xf0 > > > [48002.777033] [<ffffffff812fc4af>] kobj_attr_store+0xf/0x20 > > > [48002.777043] [<ffffffff8121a226>] sysfs_write_file+0xc6/0x140 > > > [48002.777054] [<ffffffff811a819d>] vfs_write+0xbd/0x1e0 > > > [48002.777062] [<ffffffff811a8bd9>] SyS_write+0x49/0xa0 > > > [48002.777073] [<ffffffff81656999>] > system_call_fastpath+0x16/0x1b > > > [48002.777077] ---[ end trace 15c5658c596be9f3 ]--- > > > [48002.777081] Enabling non-boot CPUs ... > > > > > > > > > I wonder if this is a result of upload_pm_data()''s use of > mutexes, which > > > being a sleeping synchronization operation, shouldn''t be done > in an > > > interrupt-off context. > > > > > > I''m also having the machine hang in the suspended state on resume > > > sometimes (that is, I open the lid/hit a key/press power to > resume the > > > laptop, but the sleep light keeps pulsing and I can''t get it > out of that > > > state without a forced power-off. I wonder if these are related. > > > > > > This is with the stock Fedora 19 kernel, but I don''t think > there are any > > > differences from upstream in this area? > > > > > > > There was a commit in 3.12 to handle systems with reduced > hardware sleep - > > but that would be a failure 100% of the time - not intermittent. > > What version of Xen are you running? > > I saw that on Xen 4.3 (or Xen 4.2) but when I upgraded to Xen 4.4 > I didn''t see > it anymore. Hence I was thinking it was Xen related. > > > The following xen commits were done in this timeframe that could be > related, depending on what Xen version you are running: > > http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=6e96c186d23873597896051b043cfeb119c4a7d5 > http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=9aa356bc9f7533c3cb7f02c823f532532876d444 > http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=9e2c5938246546a5b3f698b7421640d85602b994 > http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=529d5731e40e179e396397c633e10316a850044e >OK, I''m running with current git master Xen, so we''ll see how that goes... J
Jeremy Fitzhardinge
2013-Nov-21 21:11 UTC
Re: Xen S3 host resume: "Interrupts enabled after xen_acpi_processor_resume+0x0/0x34"
On 11/19/2013 11:52 AM, Ben Guthro wrote:> > > > On Tue, Nov 19, 2013 at 2:44 PM, Konrad Rzeszutek Wilk > <konrad.wilk@oracle.com <mailto:konrad.wilk@oracle.com>> wrote: > > On Tue, Nov 19, 2013 at 02:34:21PM -0500, Ben Guthro wrote: > > On Tue, Nov 19, 2013 at 12:57 PM, Jeremy Fitzhardinge > <jeremy@goop.org <mailto:jeremy@goop.org>>wrote: > > > > > After an S3 host resume, I''m seeing: > > > > > > [48002.772629] ACPI: Low-level resume complete > > > [48002.772802] PM: Restoring platform NVS memory > > > [48002.776143] xen_acpi_processor: Uploading Xen processor PM info > > > [48002.776691] ------------[ cut here ]------------ > > > [48002.776712] WARNING: CPU: 0 PID: 10235 at > drivers/base/syscore.c:104 > > > syscore_resume+0x9a/0xe0() > > > [48002.776751] Interrupts enabled after > xen_acpi_processor_resume+0x0/0x34 > > > [xen_acpi_processor] > > > [48002.776836] Modules linked in: tcp_lp btrfs zlib_deflate > raid6_pq xor > > > ufs hfsplus hfs > > > minix vfat msdos fat jfs xfs libcrc32c reiserfs xt_CHECKSUM > tun hidp fuse > > > nf_conntrack_ > > > netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT > xt_conntrack > > > ebtable_nat eb > > > table_broute bridge stp llc ebtable_filter ebtables ip6table_nat > > > nf_conntrack_ipv6 nf_de > > > frag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security > ip6table_raw > > > ip6table_filter ip6 > > > _tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 > nf_nat_ipv4 nf_nat > > > nf_conntrack ipt > > > able_mangle iptable_security iptable_raw rfcomm bnep > snd_hda_codec_hdmi > > > snd_hda_codec_co > > > nexant iTCO_wdt iTCO_vendor_support arc4 x86_pkg_temp_thermal > coretemp > > > iwldvm microcode > > > btusb snd_hda_intel mac80211 bluetooth joydev snd_hda_codec > snd_hwdep > > > snd_seq serio_raw > > > iwlwifi i2c_i801 snd_seq_device > > > [48002.776894] snd_pcm cfg80211 sdhci_pci sdhci mmc_core > thinkpad_acpi > > > wmi tpm_tis e100 > > > 0e rfkill snd_page_alloc tpm tpm_bios snd_timer ptp snd mei_me mei > > > soundcore shpchp lpc_ > > > ich pps_core mfd_core mperf xen_acpi_processor xen_netback > xen_blkback > > > xen_gntdev xen_ev > > > tchn xenfs xen_privcmd uinput binfmt_misc nfsd auth_rpcgss > nfs_acl lockd > > > sunrpc dm_crypt > > > crc32_pclmul crc32c_intel i915 ghash_clmulni_intel i2c_algo_bit > > > drm_kms_helper drm i2c_ > > > core video > > > [48002.776903] CPU: 0 PID: 10235 Comm: systemd-sleep Not tainted > > > 3.11.7-200.fc19.x86_64 #1 > > > [48002.776905] Hardware name: LENOVO 4286CTO/4286CTO, BIOS > 8DET59WW (1.29 > > > ) 04/02/2012 > > > [48002.776917] 0000000000000009 ffff8801c7697d30 ffffffff8164777b > > > ffff8801c7697d78 > > > [48002.776924] ffff8801c7697d68 ffffffff8106715d ffffffffa01f6000 > > > 0000000000000003 > > > [48002.776931] ffff8801c7697e08 ffff8801fd970000 0000000000000000 > > > ffff8801c7697dc8 > > > [48002.776933] Call Trace: > > > [48002.776949] [<ffffffff8164777b>] dump_stack+0x45/0x56 > > > [48002.776959] [<ffffffff8106715d>] > warn_slowpath_common+0x7d/0xa0 > > > [48002.776972] [<ffffffff810671cc>] warn_slowpath_fmt+0x4c/0x50 > > > [48002.776989] [<ffffffffa01f4bb0>] ? > > > xen_upload_processor_pm_data+0x300/0x300 [xen_acpi_processor] > > > [48002.776996] [<ffffffff813f252a>] syscore_resume+0x9a/0xe0 > > > [48002.777006] [<ffffffff810abd7c>] > suspend_devices_and_enter+0x40c/0x480 > > > [48002.777014] [<ffffffff810abf68>] pm_suspend+0x178/0x260 > > > [48002.777020] [<ffffffff810aae19>] state_store+0x79/0xf0 > > > [48002.777033] [<ffffffff812fc4af>] kobj_attr_store+0xf/0x20 > > > [48002.777043] [<ffffffff8121a226>] sysfs_write_file+0xc6/0x140 > > > [48002.777054] [<ffffffff811a819d>] vfs_write+0xbd/0x1e0 > > > [48002.777062] [<ffffffff811a8bd9>] SyS_write+0x49/0xa0 > > > [48002.777073] [<ffffffff81656999>] > system_call_fastpath+0x16/0x1b > > > [48002.777077] ---[ end trace 15c5658c596be9f3 ]--- > > > [48002.777081] Enabling non-boot CPUs ... > > > > > > > > > I wonder if this is a result of upload_pm_data()''s use of > mutexes, which > > > being a sleeping synchronization operation, shouldn''t be done > in an > > > interrupt-off context. > > > > > > I''m also having the machine hang in the suspended state on resume > > > sometimes (that is, I open the lid/hit a key/press power to > resume the > > > laptop, but the sleep light keeps pulsing and I can''t get it > out of that > > > state without a forced power-off. I wonder if these are related. > > > > > > This is with the stock Fedora 19 kernel, but I don''t think > there are any > > > differences from upstream in this area? > > > > > > > There was a commit in 3.12 to handle systems with reduced > hardware sleep - > > but that would be a failure 100% of the time - not intermittent. > > What version of Xen are you running? > > I saw that on Xen 4.3 (or Xen 4.2) but when I upgraded to Xen 4.4 > I didn''t see > it anymore. Hence I was thinking it was Xen related. > > > The following xen commits were done in this timeframe that could be > related, depending on what Xen version you are running: > > http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=6e96c186d23873597896051b043cfeb119c4a7d5 > http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=9aa356bc9f7533c3cb7f02c823f532532876d444 > http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=9e2c5938246546a5b3f698b7421640d85602b994 > http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=529d5731e40e179e396397c633e10316a850044e > >Well, I''m still seeing the kernel warning from syscore_resume about interrupts still being enabled after xen_acpi_processor_resume; that seems to be a genuine bug independent of any of the hypervisor issues. J
Reasonably Related Threads
- xen acpi cpufreq driver
- Xen 4.6.6-9 (with XPTI meltdown mitigation) packages making their way to centos-virt-xen-testing
- Kernel crash with acpi_processor, cpu_idle and intel_idle =y
- Kernel crash with acpi_processor, cpu_idle and intel_idle =y
- Stability issues since moving to 4.6 - Kernel paging request bug + VM left in null state