Hi , All I 'm a green hand and interested in open source development. I have a general question “How to test my patch before I post it to public?” Hope you guys give me some suggestions. : ) Firstly, I can re-compile the code, to assure no syntax error. However,I don't know how to test my patch's function is right or not. Some software requires unit test for each function. Is there anything similar in xen project? Thank you very much! Best Regards Wang Zhihao _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
On Sun, Apr 29, 2012 at 4:21 PM, wang zhihao <accept.acm@gmail.com> wrote:> Hi , All > > I ''m a green hand and interested in open source development. I have a general question “How to test my patch before I post it to public?” Hope you guys give me some suggestions. : ) > > Firstly, I can re-compile the code, to assure no syntax error. However,I don''t know how to test my patch''s function is right or not. Some software requires unit test for each function. Is there anything similar in xen project?There is no unit testing for Xen. What you need to test really depends on what your patch is doing. The main goal is to exercise the code you''ve just added or changed: try to put it in different combinations to make sure that it works as you expect. Try to break it, really. :-) If you''re just tweaking a simple option in the xl config file, then you need to test a few different combinations to make sure that all the reasonable combinations work. If you''re changing the locks in the memory management code in the hypervisor, then you need to run a bunch of benchmarks that exercise that code, probably for several hours. If you post your patch to the list (with an appropriate description) we may be able to give you some suggestions. -George
Hi George: Thanks for your guides, But I don''t know what "combination" means. Could you tell me more about it? Best Regards Wang Zhihao 在 2012-4-30，下午5:16， George Dunlap 写道：> On Sun, Apr 29, 2012 at 4:21 PM, wang zhihao <accept.acm@gmail.com> wrote: >> Hi , All >> >> I ''m a green hand and interested in open source development. I have a general question “How to test my patch before I post it to public?” Hope you guys give me some suggestions. : ) >> >> Firstly, I can re-compile the code, to assure no syntax error. However,I don''t know how to test my patch''s function is right or not. Some software requires unit test for each function. Is there anything similar in xen project? > > There is no unit testing for Xen. What you need to test really > depends on what your patch is doing. The main goal is to exercise the > code you''ve just added or changed: try to put it in different > combinations to make sure that it works as you expect. Try to break > it, really. :-) > > If you''re just tweaking a simple option in the xl config file, then > you need to test a few different combinations to make sure that all > the reasonable combinations work. If you''re changing the locks in the > memory management code in the hypervisor, then you need to run a bunch > of benchmarks that exercise that code, probably for several hours. > > If you post your patch to the list (with an appropriate description) > we may be able to give you some suggestions. > > -George_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
On Mon, Apr 30, 2012 at 3:12 PM, wang zhihao <accept.acm@gmail.com> wrote:> Hi George: > > Thanks for your guides, But I don't know what "combination" means. Could > you tell me more about it?I can't really give you an example without an example to work with. :-) What does your patch do? -George> > Best Regards > Wang Zhihao > > 在 2012-4-30，下午5:16， George Dunlap 写道： > > On Sun, Apr 29, 2012 at 4:21 PM, wang zhihao <accept.acm@gmail.com> wrote: > > Hi , All > > > I 'm a green hand and interested in open source development. I have a > general question "How to test my patch before I post it to public?" Hope you > guys give me some suggestions. : ) > > > Firstly, I can re-compile the code, to assure no syntax error. However,I > don't know how to test my patch's function is right or not. Some software > requires unit test for each function. Is there anything similar in xen > project? > > > There is no unit testing for Xen. What you need to test really > depends on what your patch is doing. The main goal is to exercise the > code you've just added or changed: try to put it in different > combinations to make sure that it works as you expect. Try to break > it, really. :-) > > If you're just tweaking a simple option in the xl config file, then > you need to test a few different combinations to make sure that all > the reasonable combinations work. If you're changing the locks in the > memory management code in the hypervisor, then you need to run a bunch > of benchmarks that exercise that code, probably for several hours. > > If you post your patch to the list (with an appropriate description) > we may be able to give you some suggestions. > > -George > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
Hi George: I don't have a patch now, but may have one in future. : P Ok, I will try to make a patch and then ask this question : ) Regards Wang zhihao 在 2012-4-30，下午10:19， George Dunlap 写道：> On Mon, Apr 30, 2012 at 3:12 PM, wang zhihao <accept.acm@gmail.com> wrote: >> Hi George: >> >> Thanks for your guides, But I don't know what "combination" means. Could >> you tell me more about it? > > I can't really give you an example without an example to work with. > :-) What does your patch do? > > -George > >> >> Best Regards >> Wang Zhihao >> >> 在 2012-4-30，下午5:16， George Dunlap 写道： >> >> On Sun, Apr 29, 2012 at 4:21 PM, wang zhihao <accept.acm@gmail.com> wrote: >> >> Hi , All >> >> >> I 'm a green hand and interested in open source development. I have a >> general question "How to test my patch before I post it to public?" Hope you >> guys give me some suggestions. : ) >> >> >> Firstly, I can re-compile the code, to assure no syntax error. However,I >> don't know how to test my patch's function is right or not. Some software >> requires unit test for each function. Is there anything similar in xen >> project? >> >> >> There is no unit testing for Xen. What you need to test really >> depends on what your patch is doing. The main goal is to exercise the >> code you've just added or changed: try to put it in different >> combinations to make sure that it works as you expect. Try to break >> it, really. :-) >> >> If you're just tweaking a simple option in the xl config file, then >> you need to test a few different combinations to make sure that all >> the reasonable combinations work. If you're changing the locks in the >> memory management code in the hypervisor, then you need to run a bunch >> of benchmarks that exercise that code, probably for several hours. >> >> If you post your patch to the list (with an appropriate description) >> we may be able to give you some suggestions. >> >> -George >> >> >> >> _______________________________________________ >> Xen-devel mailing list >> Xen-devel@lists.xen.org >> http://lists.xen.org/xen-devel >>_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
On 30/04/12 15:25, wang zhihao wrote:> Hi George: > > I don't have a patch now, but may have one in future. : P > > Ok, I will try to make a patch and then ask this question : )Well, as I said, the general idea is, "try to break it". If you add a new option, for instance, check to make sure that it works right: * If you put in a reasonable value * If you put in an unreasonably high value * If you put in a negative number * If you don't specify the option at all * If you put a string instead of a number Make sense? -George> > Regards > Wang zhihao > > 在 2012-4-30，下午10:19， George Dunlap 写道： > >> On Mon, Apr 30, 2012 at 3:12 PM, wang zhihao <accept.acm@gmail.com> wrote: >>> Hi George: >>> >>> Thanks for your guides, But I don't know what "combination" means. Could >>> you tell me more about it? >> I can't really give you an example without an example to work with. >> :-) What does your patch do? >> >> -George >> >>> Best Regards >>> Wang Zhihao >>> >>> 在 2012-4-30，下午5:16， George Dunlap 写道： >>> >>> On Sun, Apr 29, 2012 at 4:21 PM, wang zhihao <accept.acm@gmail.com> wrote: >>> >>> Hi , All >>> >>> >>> I 'm a green hand and interested in open source development. I have a >>> general question "How to test my patch before I post it to public?" Hope you >>> guys give me some suggestions. : ) >>> >>> >>> Firstly, I can re-compile the code, to assure no syntax error. However,I >>> don't know how to test my patch's function is right or not. Some software >>> requires unit test for each function. Is there anything similar in xen >>> project? >>> >>> >>> There is no unit testing for Xen. What you need to test really >>> depends on what your patch is doing. The main goal is to exercise the >>> code you've just added or changed: try to put it in different >>> combinations to make sure that it works as you expect. Try to break >>> it, really. :-) >>> >>> If you're just tweaking a simple option in the xl config file, then >>> you need to test a few different combinations to make sure that all >>> the reasonable combinations work. If you're changing the locks in the >>> memory management code in the hypervisor, then you need to run a bunch >>> of benchmarks that exercise that code, probably for several hours. >>> >>> If you post your patch to the list (with an appropriate description) >>> we may be able to give you some suggestions. >>> >>> -George >>> >>> >>> >>> _______________________________________________ >>> Xen-devel mailing list >>> Xen-devel@lists.xen.org >>> http://lists.xen.org/xen-devel >>>_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
Hi George: I got it. Try some extreme value or invalid input to the running code with my new feature, If the patch is a simple option or something-like which can be easy tested in this way, Right? Regards Wang Zhihao 在 2012-4-30，下午10:46， George Dunlap 写道：> On 30/04/12 15:25, wang zhihao wrote: >> Hi George: >> >> I don't have a patch now, but may have one in future. : P >> >> Ok, I will try to make a patch and then ask this question : ) > Well, as I said, the general idea is, "try to break it". If you add a > new option, for instance, check to make sure that it works right: > * If you put in a reasonable value > * If you put in an unreasonably high value > * If you put in a negative number > * If you don't specify the option at all > * If you put a string instead of a number > > Make sense? > > -George > >> >> Regards >> Wang zhihao >> >> 在 2012-4-30，下午10:19， George Dunlap 写道： >> >>> On Mon, Apr 30, 2012 at 3:12 PM, wang zhihao <accept.acm@gmail.com> wrote: >>>> Hi George: >>>> >>>> Thanks for your guides, But I don't know what "combination" means. Could >>>> you tell me more about it? >>> I can't really give you an example without an example to work with. >>> :-) What does your patch do? >>> >>> -George >>> >>>> Best Regards >>>> Wang Zhihao >>>> >>>> 在 2012-4-30，下午5:16， George Dunlap 写道： >>>> >>>> On Sun, Apr 29, 2012 at 4:21 PM, wang zhihao <accept.acm@gmail.com> wrote: >>>> >>>> Hi , All >>>> >>>> >>>> I 'm a green hand and interested in open source development. I have a >>>> general question "How to test my patch before I post it to public?" Hope you >>>> guys give me some suggestions. : ) >>>> >>>> >>>> Firstly, I can re-compile the code, to assure no syntax error. However,I >>>> don't know how to test my patch's function is right or not. Some software >>>> requires unit test for each function. Is there anything similar in xen >>>> project? >>>> >>>> >>>> There is no unit testing for Xen. What you need to test really >>>> depends on what your patch is doing. The main goal is to exercise the >>>> code you've just added or changed: try to put it in different >>>> combinations to make sure that it works as you expect. Try to break >>>> it, really. :-) >>>> >>>> If you're just tweaking a simple option in the xl config file, then >>>> you need to test a few different combinations to make sure that all >>>> the reasonable combinations work. If you're changing the locks in the >>>> memory management code in the hypervisor, then you need to run a bunch >>>> of benchmarks that exercise that code, probably for several hours. >>>> >>>> If you post your patch to the list (with an appropriate description) >>>> we may be able to give you some suggestions. >>>> >>>> -George >>>> >>>> >>>> >>>> _______________________________________________ >>>> Xen-devel mailing list >>>> Xen-devel@lists.xen.org >>>> http://lists.xen.org/xen-devel >>>> >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
Apparently Analagous Threads
- How to select a rootfs to test job test-amd64-amd64-xl on my own machine ?
- How to avoid this error "bits/predefs.h No such file or directory" when compiling XEN?
- fatal error if Flex and Bison is not configured
- Balloon driver for Linux/HVM
- [LLVMdev] GSOC2012 idea: Python bindings for LLVM