hi all Generate ept entry violation into function of ept_handle_violation . then call function of hvm_hap_nested_page_fault,this judge page type into p2m_mem_paging_populate(); Here the event to notify the user space "xenpaging" process to paging in, but not Complete the page in on the next step Instruction; i thrink p2m_mem_paging_populate --> p2m_mem_paging_prep-->p2m_mem_paging_resume ,Complete the process before you start the implementation of the above. Is that right? tkx _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Hi, Sorry, I''m not quite sure what you''re asking and/or if you ran into a problem? Are you just asking how the xenpaging mechanism works? Patrick 2010/9/2 linqaingmin <linqiangmin@huawei.com>:> hi all > > Generate ept entry violation into function of ept_handle_violation . > > then call function of hvm_hap_nested_page_fault,this judge page type into > p2m_mem_paging_populate(); > > Here the event to notify the user space "xenpaging" process to paging in, > but not Complete the page in on the next step Instruction; > > i thrink p2m_mem_paging_populate --> > p2m_mem_paging_prep-->p2m_mem_paging_resume ,Complete the process before you > start the implementation of the above. > > Is that right? > > tkx > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
hi We run windows2003 HVM on xen4.0.1, The VM is 2048MB, 2 VCPU run command "xenpaging domID 260000" and want to paging 1024MB in xen. It causes two different crashes. 1) the first one the xm dmesg context is follow (XEN) vmx.c:2150:d6 EPT violation 0x1 (r--/---), gpa 0x0000007fbba020, mfn 0xffffffffff, type 10. (XEN) p2m-ept.c:533:d6 Walking EPT tables for domain 6 gfn 7fbba (XEN) p2m-ept.c:552:d6 epte 435b38007 (XEN) p2m-ept.c:552:d6 epte 4395b3007 (XEN) p2m-ept.c:552:d6 epte 433f7f007 (XEN) p2m-ept.c:552:d6 epte ffffffffffa00 (XEN) domain_crash called from vmx.c:2160 (XEN) Domain 6 (vcpu#1) crashed on cpu#14: (XEN) ----[ Xen-4.0.1 x86_64 debug=n Not tainted ]---- (XEN) CPU: 14 (XEN) RIP: 0008:[<000000008088dc37>] (XEN) RFLAGS: 0000000000010246 CONTEXT: hvm guest (XEN) rax: 000000007fbba020 rbx: 00000000f7727000 rcx: 0000000000000000 (XEN) rdx: 0000000080010031 rsi: 000000008996a418 rdi: 00000000f772a090 (XEN) rbp: 0000000089d88648 rsp: 00000000baf2ace0 r8: 0000000000000000 (XEN) r9: 0000000000000000 r10: 0000000000000000 r11: 0000000000000000 (XEN) r12: 0000000000000000 r13: 0000000000000000 r14: 0000000000000000 (XEN) r15: 0000000000000000 cr0: 000000008001003b cr4: 00000000000006f9 (XEN) cr3: 0000000000790000 cr2: 00000000c3cfb008 (XEN) ds: 0023 es: 0023 fs: 0030 gs: 0000 ss: 0010 cs: 0008 this is the guest linear-address field is invalid. GLA ; 0x7fbba020 2) another crash is the qemu-dm Segmentation fault , the "s" parameter is NULL log is following : Program terminated with signal 11, Segmentation fault. #0 0x00000000004451d2 in ide_read_dma_cb (opaque=0xb79028, ret=0) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/hw/ide.c:1232 1232 if (!s->bs) return; /* ouch! (see ide_flush_cb) */ (gdb) bt #0 0x00000000004451d2 in ide_read_dma_cb (opaque=0xb79028, ret=0) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/hw/ide.c:1232 #1 0x000000000041745d in dma_bdrv_cb (opaque=0xbbb1f0, ret=0) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/dma-helpers.c:97 #2 0x00000000004172f2 in reschedule_dma (opaque=0xbbb1f0) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/dma-helpers.c:63 #3 0x000000000040c48a in qemu_bh_poll () at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/vl.c:3427 #4 0x000000000040cfe2 in main_loop_wait (timeout=10) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/vl.c:3831 #5 0x00000000004c2daf in main_loop () at helper2.c:577 #6 0x000000000041056e in main (argc=28, argv=0x7fff9eeee288, envp=0x7fff9eeee370) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/vl.c:6153 (gdb) When the Guest OS have install PV Driver. only first crash lin ----- Original Message ----- From: Patrick Colp To: linqaingmin Cc: xen-devel@lists.xensource.com Sent: Friday, September 03, 2010 11:08 PM Subject: Re: [Xen-devel] about the memory paging Hi, Sorry, I''m not quite sure what you''re asking and/or if you ran into a problem? Are you just asking how the xenpaging mechanism works? Patrick 2010/9/2 linqaingmin <linqiangmin@huawei.com>: > hi all > > Generate ept entry violation into function of ept_handle_violation . > > then call function of hvm_hap_nested_page_fault,this judge page type into > p2m_mem_paging_populate(); > > Here the event to notify the user space "xenpaging" process to paging in, > but not Complete the page in on the next step Instruction; > > i thrink p2m_mem_paging_populate --> > p2m_mem_paging_prep-->p2m_mem_paging_resume ,Complete the process before you > start the implementation of the above. > > Is that right? > > tkx > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Do you meet this issue on Linux guest also? Is your windows 2003 guest a PAE guest? If yes, can you check if it is a "mov cr3" instruction? You can either add a hook in xen hypervisor to dump the guest memory around the RIP (0x8088dc37), or connect to the guest through windbg with paging off, and disassmble it. I suspect it is because the page used as guest CR3 is paging out, and for PAE guest, that will cause a EPT violation with GLA_VALID bit cleared. And then in fact the hvm_hap_nested_page_fault() function is not called at all. The easist experiment is, remove the check for the GLA_VALID and see the result. CC Xin who knows EPT better than me. I didn't check log 2, so no idea of the reason. Thanks --jyh From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of linqaingmin Sent: Saturday, September 04, 2010 4:56 PM To: Patrick Colp Cc: xen-devel@lists.xensource.com Subject: Re: [Xen-devel] about the memory paging hi We run windows2003 HVM on xen4.0.1, The VM is 2048MB, 2 VCPU run command "xenpaging domID 260000" and want to paging 1024MB in xen. It causes two different crashes. 1) the first one the xm dmesg context is follow (XEN) vmx.c:2150:d6 EPT violation 0x1 (r--/---), gpa 0x0000007fbba020, mfn 0xffffffffff, type 10. (XEN) p2m-ept.c:533:d6 Walking EPT tables for domain 6 gfn 7fbba (XEN) p2m-ept.c:552:d6 epte 435b38007 (XEN) p2m-ept.c:552:d6 epte 4395b3007 (XEN) p2m-ept.c:552:d6 epte 433f7f007 (XEN) p2m-ept.c:552:d6 epte ffffffffffa00 (XEN) domain_crash called from vmx.c:2160 (XEN) Domain 6 (vcpu#1) crashed on cpu#14: (XEN) ----[ Xen-4.0.1 x86_64 debug=n Not tainted ]---- (XEN) CPU: 14 (XEN) RIP: 0008:[<000000008088dc37>] (XEN) RFLAGS: 0000000000010246 CONTEXT: hvm guest (XEN) rax: 000000007fbba020 rbx: 00000000f7727000 rcx: 0000000000000000 (XEN) rdx: 0000000080010031 rsi: 000000008996a418 rdi: 00000000f772a090 (XEN) rbp: 0000000089d88648 rsp: 00000000baf2ace0 r8: 0000000000000000 (XEN) r9: 0000000000000000 r10: 0000000000000000 r11: 0000000000000000 (XEN) r12: 0000000000000000 r13: 0000000000000000 r14: 0000000000000000 (XEN) r15: 0000000000000000 cr0: 000000008001003b cr4: 00000000000006f9 (XEN) cr3: 0000000000790000 cr2: 00000000c3cfb008 (XEN) ds: 0023 es: 0023 fs: 0030 gs: 0000 ss: 0010 cs: 0008 this is the guest linear-address field is invalid. GLA ; 0x7fbba020 2) another crash is the qemu-dm Segmentation fault , the "s" parameter is NULL log is following : Program terminated with signal 11, Segmentation fault. #0 0x00000000004451d2 in ide_read_dma_cb (opaque=0xb79028, ret=0) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/hw/ide.c:1232 1232 if (!s->bs) return; /* ouch! (see ide_flush_cb) */ (gdb) bt #0 0x00000000004451d2 in ide_read_dma_cb (opaque=0xb79028, ret=0) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/hw/ide.c:1232 #1 0x000000000041745d in dma_bdrv_cb (opaque=0xbbb1f0, ret=0) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/dma-helpers.c:97 #2 0x00000000004172f2 in reschedule_dma (opaque=0xbbb1f0) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/dma-helpers.c:63 #3 0x000000000040c48a in qemu_bh_poll () at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/vl.c:3427 #4 0x000000000040cfe2 in main_loop_wait (timeout=10) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/vl.c:3831 #5 0x00000000004c2daf in main_loop () at helper2.c:577 #6 0x000000000041056e in main (argc=28, argv=0x7fff9eeee288, envp=0x7fff9eeee370) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/vl.c:6153 (gdb) When the Guest OS have install PV Driver. only first crash lin ----- Original Message ----- From: Patrick Colp<mailto:pjcolp@cs.ubc.ca> To: linqaingmin<mailto:linqiangmin@huawei.com> Cc: xen-devel@lists.xensource.com<mailto:xen-devel@lists.xensource.com> Sent: Friday, September 03, 2010 11:08 PM Subject: Re: [Xen-devel] about the memory paging Hi, Sorry, I'm not quite sure what you're asking and/or if you ran into a problem? Are you just asking how the xenpaging mechanism works? Patrick 2010/9/2 linqaingmin <linqiangmin@huawei.com<mailto:linqiangmin@huawei.com>>:> hi all > > Generate ept entry violation into function of ept_handle_violation . > > then call function of hvm_hap_nested_page_fault,this judge page type into > p2m_mem_paging_populate(); > > Here the event to notify the user space "xenpaging" process to paging in, > but not Complete the page in on the next step Instruction; > > i thrink p2m_mem_paging_populate --> > p2m_mem_paging_prep-->p2m_mem_paging_resume ,Complete the process before you > start the implementation of the above. > > Is that right? > > tkx > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com> > http://lists.xensource.com/xen-devel > >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Thanks , you are right
the RIP of Linux guest is (XEN) RIP: 0060:[<00000000c03482d0>]
with which we can use objdump to locate the instrucation is "mov %eax
%cr3"
I think that the EPT violation maybe cause by the next instruction of "mov
%eax %cr3"
the linux guest objdump result:
c0347e32 <schedule>:
........
c03482cb: 05 00 00 00 40 add $0x40000000,%eax
c03482d0: 0f 22 d8 mov %eax,%cr3
c03482d3: 8b 45 cc mov -0x34(%ebp),%eax
c03482d6: 8b b1 5c 01 00 00 mov 0x15c(%ecx),%esi
lin
----- Original Message -----
From: Jiang, Yunhong
To: linqaingmin ; Patrick Colp
Cc: xen-devel@lists.xensource.com ; Li, Xin
Sent: Tuesday, September 14, 2010 10:44 PM
Subject: RE: [Xen-devel] about the memory paging
Do you meet this issue on Linux guest also?
Is your windows 2003 guest a PAE guest? If yes, can you check if it is a
"mov cr3" instruction? You can either add a hook in xen hypervisor to
dump the guest memory around the RIP (0x8088dc37), or connect to the guest
through windbg with paging off, and disassmble it.
I suspect it is because the page used as guest CR3 is paging out, and for PAE
guest, that will cause a EPT violation with GLA_VALID bit cleared. And then in
fact the hvm_hap_nested_page_fault() function is not called at all.
The easist experiment is, remove the check for the GLA_VALID and see the
result.
CC Xin who knows EPT better than me.
I didn''t check log 2, so no idea of the reason.
Thanks
--jyh
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of linqaingmin
Sent: Saturday, September 04, 2010 4:56 PM
To: Patrick Colp
Cc: xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] about the memory paging
hi
We run windows2003 HVM on xen4.0.1, The VM is 2048MB, 2 VCPU
run command "xenpaging domID 260000" and want to paging 1024MB in
xen.
It causes two different crashes.
1) the first one
the xm dmesg context is follow
(XEN) vmx.c:2150:d6 EPT violation 0x1 (r--/---), gpa 0x0000007fbba020, mfn
0xffffffffff, type 10.
(XEN) p2m-ept.c:533:d6 Walking EPT tables for domain 6 gfn 7fbba
(XEN) p2m-ept.c:552:d6 epte 435b38007
(XEN) p2m-ept.c:552:d6 epte 4395b3007
(XEN) p2m-ept.c:552:d6 epte 433f7f007
(XEN) p2m-ept.c:552:d6 epte ffffffffffa00
(XEN) domain_crash called from vmx.c:2160
(XEN) Domain 6 (vcpu#1) crashed on cpu#14:
(XEN) ----[ Xen-4.0.1 x86_64 debug=n Not tainted ]----
(XEN) CPU: 14
(XEN) RIP: 0008:[<000000008088dc37>]
(XEN) RFLAGS: 0000000000010246 CONTEXT: hvm guest
(XEN) rax: 000000007fbba020 rbx: 00000000f7727000 rcx: 0000000000000000
(XEN) rdx: 0000000080010031 rsi: 000000008996a418 rdi: 00000000f772a090
(XEN) rbp: 0000000089d88648 rsp: 00000000baf2ace0 r8: 0000000000000000
(XEN) r9: 0000000000000000 r10: 0000000000000000 r11: 0000000000000000
(XEN) r12: 0000000000000000 r13: 0000000000000000 r14: 0000000000000000
(XEN) r15: 0000000000000000 cr0: 000000008001003b cr4: 00000000000006f9
(XEN) cr3: 0000000000790000 cr2: 00000000c3cfb008
(XEN) ds: 0023 es: 0023 fs: 0030 gs: 0000 ss: 0010 cs: 0008
this is the guest linear-address field is invalid. GLA ; 0x7fbba020
2) another crash is the qemu-dm Segmentation fault , the "s"
parameter is NULL
log is following :
Program terminated with signal 11, Segmentation fault.
#0 0x00000000004451d2 in ide_read_dma_cb (opaque=0xb79028, ret=0) at
/home/Lucifer/xen-4.0.1/tools/ioemu-dir/hw/ide.c:1232
1232 if (!s->bs) return; /* ouch! (see ide_flush_cb) */
(gdb) bt
#0 0x00000000004451d2 in ide_read_dma_cb (opaque=0xb79028, ret=0) at
/home/Lucifer/xen-4.0.1/tools/ioemu-dir/hw/ide.c:1232
#1 0x000000000041745d in dma_bdrv_cb (opaque=0xbbb1f0, ret=0) at
/home/Lucifer/xen-4.0.1/tools/ioemu-dir/dma-helpers.c:97
#2 0x00000000004172f2 in reschedule_dma (opaque=0xbbb1f0) at
/home/Lucifer/xen-4.0.1/tools/ioemu-dir/dma-helpers.c:63
#3 0x000000000040c48a in qemu_bh_poll () at
/home/Lucifer/xen-4.0.1/tools/ioemu-dir/vl.c:3427
#4 0x000000000040cfe2 in main_loop_wait (timeout=10) at
/home/Lucifer/xen-4.0.1/tools/ioemu-dir/vl.c:3831
#5 0x00000000004c2daf in main_loop () at helper2.c:577
#6 0x000000000041056e in main (argc=28, argv=0x7fff9eeee288,
envp=0x7fff9eeee370) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/vl.c:6153
(gdb)
When the Guest OS have install PV Driver. only first crash
lin
----- Original Message -----
From: Patrick Colp
To: linqaingmin
Cc: xen-devel@lists.xensource.com
Sent: Friday, September 03, 2010 11:08 PM
Subject: Re: [Xen-devel] about the memory paging
Hi,
Sorry, I''m not quite sure what you''re asking and/or if you
ran into a
problem? Are you just asking how the xenpaging mechanism works?
Patrick
2010/9/2 linqaingmin <linqiangmin@huawei.com>:
> hi all
>
> Generate ept entry violation into function of ept_handle_violation .
>
> then call function of hvm_hap_nested_page_fault,this judge page type
into
> p2m_mem_paging_populate();
>
> Here the event to notify the user space "xenpaging" process
to paging in,
> but not Complete the page in on the next step Instruction;
>
> i thrink p2m_mem_paging_populate -->
> p2m_mem_paging_prep-->p2m_mem_paging_resume ,Complete the process
before you
> start the implementation of the above.
>
> Is that right?
>
> tkx
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Simply remove the check for EPT_GLA_VALID does not work?
if ( (qualification & EPT_GLA_VALID) &&
hvm_hap_nested_page_fault(gfn) )
return;
Thanks
--jyh
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of linqaingmin
Sent: Wednesday, September 15, 2010 10:57 AM
To: Jiang, Yunhong; Patrick Colp
Cc: xen-devel@lists.xensource.com; Li, Xin
Subject: Re: [Xen-devel] about the memory paging
Thanks , you are right
the RIP of Linux guest is (XEN) RIP: 0060:[<00000000c03482d0>]
with which we can use objdump to locate the instrucation is "mov %eax
%cr3"
I think that the EPT violation maybe cause by the next instruction of "mov
%eax %cr3"
the linux guest objdump result:
c0347e32 <schedule>:
........
c03482cb: 05 00 00 00 40 add $0x40000000,%eax
c03482d0: 0f 22 d8 mov %eax,%cr3
c03482d3: 8b 45 cc mov -0x34(%ebp),%eax
c03482d6: 8b b1 5c 01 00 00 mov 0x15c(%ecx),%esi
lin
----- Original Message -----
From: Jiang, Yunhong<mailto:yunhong.jiang@intel.com>
To: linqaingmin<mailto:linqiangmin@huawei.com> ; Patrick
Colp<mailto:pjcolp@cs.ubc.ca>
Cc: xen-devel@lists.xensource.com<mailto:xen-devel@lists.xensource.com> ;
Li, Xin<mailto:xin.li@intel.com>
Sent: Tuesday, September 14, 2010 10:44 PM
Subject: RE: [Xen-devel] about the memory paging
Do you meet this issue on Linux guest also?
Is your windows 2003 guest a PAE guest? If yes, can you check if it is a
"mov cr3" instruction? You can either add a hook in xen hypervisor to
dump the guest memory around the RIP (0x8088dc37), or connect to the guest
through windbg with paging off, and disassmble it.
I suspect it is because the page used as guest CR3 is paging out, and for PAE
guest, that will cause a EPT violation with GLA_VALID bit cleared. And then in
fact the hvm_hap_nested_page_fault() function is not called at all.
The easist experiment is, remove the check for the GLA_VALID and see the result.
CC Xin who knows EPT better than me.
I didn't check log 2, so no idea of the reason.
Thanks
--jyh
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of linqaingmin
Sent: Saturday, September 04, 2010 4:56 PM
To: Patrick Colp
Cc: xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] about the memory paging
hi
We run windows2003 HVM on xen4.0.1, The VM is 2048MB, 2 VCPU
run command "xenpaging domID 260000" and want to paging 1024MB in xen.
It causes two different crashes.
1) the first one
the xm dmesg context is follow
(XEN) vmx.c:2150:d6 EPT violation 0x1 (r--/---), gpa 0x0000007fbba020, mfn
0xffffffffff, type 10.
(XEN) p2m-ept.c:533:d6 Walking EPT tables for domain 6 gfn 7fbba
(XEN) p2m-ept.c:552:d6 epte 435b38007
(XEN) p2m-ept.c:552:d6 epte 4395b3007
(XEN) p2m-ept.c:552:d6 epte 433f7f007
(XEN) p2m-ept.c:552:d6 epte ffffffffffa00
(XEN) domain_crash called from vmx.c:2160
(XEN) Domain 6 (vcpu#1) crashed on cpu#14:
(XEN) ----[ Xen-4.0.1 x86_64 debug=n Not tainted ]----
(XEN) CPU: 14
(XEN) RIP: 0008:[<000000008088dc37>]
(XEN) RFLAGS: 0000000000010246 CONTEXT: hvm guest
(XEN) rax: 000000007fbba020 rbx: 00000000f7727000 rcx: 0000000000000000
(XEN) rdx: 0000000080010031 rsi: 000000008996a418 rdi: 00000000f772a090
(XEN) rbp: 0000000089d88648 rsp: 00000000baf2ace0 r8: 0000000000000000
(XEN) r9: 0000000000000000 r10: 0000000000000000 r11: 0000000000000000
(XEN) r12: 0000000000000000 r13: 0000000000000000 r14: 0000000000000000
(XEN) r15: 0000000000000000 cr0: 000000008001003b cr4: 00000000000006f9
(XEN) cr3: 0000000000790000 cr2: 00000000c3cfb008
(XEN) ds: 0023 es: 0023 fs: 0030 gs: 0000 ss: 0010 cs: 0008
this is the guest linear-address field is invalid. GLA ; 0x7fbba020
2) another crash is the qemu-dm Segmentation fault , the "s" parameter
is NULL
log is following :
Program terminated with signal 11, Segmentation fault.
#0 0x00000000004451d2 in ide_read_dma_cb (opaque=0xb79028, ret=0) at
/home/Lucifer/xen-4.0.1/tools/ioemu-dir/hw/ide.c:1232
1232 if (!s->bs) return; /* ouch! (see ide_flush_cb) */
(gdb) bt
#0 0x00000000004451d2 in ide_read_dma_cb (opaque=0xb79028, ret=0) at
/home/Lucifer/xen-4.0.1/tools/ioemu-dir/hw/ide.c:1232
#1 0x000000000041745d in dma_bdrv_cb (opaque=0xbbb1f0, ret=0) at
/home/Lucifer/xen-4.0.1/tools/ioemu-dir/dma-helpers.c:97
#2 0x00000000004172f2 in reschedule_dma (opaque=0xbbb1f0) at
/home/Lucifer/xen-4.0.1/tools/ioemu-dir/dma-helpers.c:63
#3 0x000000000040c48a in qemu_bh_poll () at
/home/Lucifer/xen-4.0.1/tools/ioemu-dir/vl.c:3427
#4 0x000000000040cfe2 in main_loop_wait (timeout=10) at
/home/Lucifer/xen-4.0.1/tools/ioemu-dir/vl.c:3831
#5 0x00000000004c2daf in main_loop () at helper2.c:577
#6 0x000000000041056e in main (argc=28, argv=0x7fff9eeee288,
envp=0x7fff9eeee370) at /home/Lucifer/xen-4.0.1/tools/ioemu-dir/vl.c:6153
(gdb)
When the Guest OS have install PV Driver. only first crash
lin
----- Original Message -----
From: Patrick Colp<mailto:pjcolp@cs.ubc.ca>
To: linqaingmin<mailto:linqiangmin@huawei.com>
Cc: xen-devel@lists.xensource.com<mailto:xen-devel@lists.xensource.com>
Sent: Friday, September 03, 2010 11:08 PM
Subject: Re: [Xen-devel] about the memory paging
Hi,
Sorry, I'm not quite sure what you're asking and/or if you ran into a
problem? Are you just asking how the xenpaging mechanism works?
Patrick
2010/9/2 linqaingmin
<linqiangmin@huawei.com<mailto:linqiangmin@huawei.com>>:> hi all
>
> Generate ept entry violation into function of ept_handle_violation .
>
> then call function of hvm_hap_nested_page_fault,this judge page type into
> p2m_mem_paging_populate();
>
> Here the event to notify the user space "xenpaging" process to
paging in,
> but not Complete the page in on the next step Instruction;
>
> i thrink p2m_mem_paging_populate -->
> p2m_mem_paging_prep-->p2m_mem_paging_resume ,Complete the process before
you
> start the implementation of the above.
>
> Is that right?
>
> tkx
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> http://lists.xensource.com/xen-devel
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel