thr3ads.net - Xen devel - [Xen-devel] [Fwd: Problems with power management] [Jun 2009]

If this information is useful, please help other people find it:
Share via:

Mike Brady

2009-Jun-04 05:40 UTC

[Xen-devel] [Fwd: Problems with power management]

I posted this on the user list but it has been suggested to me that it
may pay to ask on the devel list as well as I didn''t get any responses.

Thanks

Mike

-------- Forwarded Message --------> From: Mike Brady <mike.brady@devnull.net.nz>
> Reply-To: mike.brady@devnull.net.nz
> To: xen-users@lists.xensource.com <xen-users@lists.xensource.com>
> Subject: Problems with power management
> Date: Sat, 30 May 2009 16:28:11 +1200
> 
> I do not seem to be able to get any where with the power management
> functions. I have had a look at the xenpm Wiki page, but it hasn''t
> helped.  Its probably something completely obvious, but I can''t
see it.
> 
> I running Xen 3.4.0 on Centos 5.3 x86_64 using the gitco RPMs on an
> Intel S5000PSL motherboard with 2 x Xeon 5410s.  Dom0 is running the
> latest Centos 5.3 kernel.
> 
> My xm dmesg output is below followed by the output that I get from the
> xenpm get* commands, which isn''t much.
> 
> ===========================================> [root@b52 ~]# xm dmesg
>  __  __            _____ _  _    ___
>  \ \/ /___ _ __   |___ /| || |  / _ \
>   \  // _ \ ''_ \    |_ \| || |_| | | |
>   /  \  __/ | | |  ___) |__   _| |_| |
>  /_/\_\___|_| |_| |____(_) |_|(_)___/
> 
> (XEN) Xen version 3.4.0 (root@gitco.tld) (gcc version 4.1.2 20080704
> (Red Hat 4.1.2-44)) Wed May 27 21:53:09 CEST 2009
> (XEN) Latest ChangeSet: unavailable
> (XEN) Command line: cpufreq=xen cpuidle dom0_max_vcpus=1
> dom0_vcpus_pin=true dom0_mem=1024M apic_verbosity=verbose loglvl=all
> (XEN) Video information:
> (XEN)  VGA is text mode 80x25, font 8x16
> (XEN)  VBE/DDC methods: none; EDID transfer time: 2 seconds
> (XEN)  EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN)  Found 2 MBR signatures
> (XEN)  Found 2 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN)  0000000000000000 - 000000000009f400 (usable)
> (XEN)  000000000009f400 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 000000009e2e1000 (usable)
> (XEN)  000000009e2e1000 - 000000009e3a3000 (ACPI NVS)
> (XEN)  000000009e3a3000 - 000000009fa32000 (usable)
> (XEN)  000000009fa32000 - 000000009fa9a000 (reserved)
> (XEN)  000000009fa9a000 - 000000009faac000 (usable)
> (XEN)  000000009faac000 - 000000009fb1a000 (ACPI NVS)
> (XEN)  000000009fb1a000 - 000000009fb26000 (usable)
> (XEN)  000000009fb26000 - 000000009fb3a000 (ACPI data)
> (XEN)  000000009fb3a000 - 000000009fc00000 (usable)
> (XEN)  000000009fc00000 - 00000000b0000000 (reserved)
> (XEN)  00000000ffc00000 - 00000000ffc0c000 (reserved)
> (XEN)  0000000100000000 - 0000000260000000 (usable)
> (XEN) System RAM: 8185MB (8382412kB)
> (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
> (XEN) ACPI: XSDT 9FB39120, 0084 (r1 INTEL  S5000PSL        0 INTL
> 1000013)
> (XEN) ACPI: FACP 9FB37000, 00F4 (r3 INTEL  S5000PSL        0 INTL
> 1000013)
> (XEN) ACPI: DSDT 9FB30000, 57F6 (r2 INTEL  S5000PSL        1 INTL
> 1000013)
> (XEN) ACPI: FACS 9FAAC000, 0040
> (XEN) ACPI: APIC 9FB36000, 00C8 (r1 INTEL  S5000PSL        0 INTL
> 1000013)
> (XEN) ACPI: SPCR 9FB2F000, 0050 (r1 INTEL  S5000PSL        0 INTL
> 1000013)
> (XEN) ACPI: HPET 9FB2E000, 0038 (r1 INTEL  S5000PSL        1 INTL
> 1000013)
> (XEN) ACPI: MCFG 9FB2D000, 003C (r1 INTEL  S5000PSL        1 INTL
> 1000013)
> (XEN) ACPI: SSDT 9FB2C000, 0A14 (r2 INTEL  EIST         4000 INTL
> 1000013)
> (XEN) ACPI: SSDT 9FB2B000, 0193 (r2 INTEL  IPMI         4000 INTL
> 1000013)
> (XEN) ACPI: SSDT 9FB2A000, 00CE (r2 INTEL  CST          4000 INTL
> 1000013)
> (XEN) ACPI: HEST 9FB29000, 00A8 (r1 INTEL  S5000PSL        1 INTL
> 1)
> (XEN) ACPI: BERT 9FB28000, 0030 (r1 INTEL  S5000PSL        1 INTL
> 1)
> (XEN) ACPI: ERST 9FB27000, 0230 (r1 INTEL  S5000PSL        1 INTL
> 1)
> (XEN) ACPI: EINJ 9FB26000, 0130 (r1 INTEL  S5000PSL        1 INTL
> 1)
> (XEN) NUMA turned off
> (XEN) Faking a node at 0000000000000000-0000000260000000
> (XEN) Domain heap initialised
> (XEN) found SMP MP-table at 000fd190
> (XEN) DMI 2.5 present.
> (XEN) Using APIC driver default
> (XEN) ACPI: PM-Timer IO Port: 0x408
> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
> (XEN) ACPI:                  wakeup_vec[9faac00c], vec_size[20]
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> (XEN) Processor #0 7:7 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
> (XEN) Processor #2 7:7 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
> (XEN) Processor #4 7:7 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
> (XEN) Processor #6 7:7 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
> (XEN) Processor #1 7:7 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
> (XEN) Processor #3 7:7 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
> (XEN) Processor #5 7:7 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
> (XEN) Processor #7 7:7 APIC version 20
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> (XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
> (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
> (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) mapped APIC to ffff828bffffe000 (fee00000)
> (XEN) mapped IOAPIC to ffff828bffffd000 (fec00000)
> (XEN) mapped IOAPIC to ffff828bffffc000 (fec80000)
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Initializing CPU#0
> (XEN) Detected 2327.591 MHz processor.
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 6144K
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU: Processor Core ID: 0
> (XEN) VMX: Supported advanced features:
> (XEN)  - APIC MMIO access virtualisation
> (XEN)  - APIC TPR shadow
> (XEN)  - Virtual NMI
> (XEN)  - MSR direct-access bitmap
> (XEN) HVM: VMX enabled
> (XEN) Intel machine check reporting enabled on CPU#0.
> (XEN) CPU0: Thermal monitoring enabled (TM2)
> (XEN) CMCI: CPU0 has no CMCI support
> (XEN) CPU0: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
> (XEN) enabled ExtINT on CPU#0
> (XEN) Booting processor 1/2 eip 8c000
> (XEN) Initializing CPU#1
> (XEN) masked ExtINT on CPU#1
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 6144K
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU: Processor Core ID: 2
> (XEN) Intel machine check reporting enabled on CPU#1.
> (XEN) CPU1: Thermal monitoring enabled (TM2)
> (XEN) CMCI: CPU1 has no CMCI support
> (XEN) CPU1: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
> (XEN) Booting processor 2/4 eip 8c000
> (XEN) Initializing CPU#2
> (XEN) masked ExtINT on CPU#2
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 6144K
> (XEN) CPU: Physical Processor ID: 1
> (XEN) CPU: Processor Core ID: 0
> (XEN) Intel machine check reporting enabled on CPU#2.
> (XEN) CPU2: Thermal monitoring enabled (TM2)
> (XEN) CMCI: CPU2 has no CMCI support
> (XEN) CPU2: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
> (XEN) Booting processor 3/6 eip 8c000
> (XEN) Initializing CPU#3
> (XEN) masked ExtINT on CPU#3
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 6144K
> (XEN) CPU: Physical Processor ID: 1
> (XEN) CPU: Processor Core ID: 2
> (XEN) Intel machine check reporting enabled on CPU#3.
> (XEN) CPU3: Thermal monitoring enabled (TM2)
> (XEN) CMCI: CPU3 has no CMCI support
> (XEN) CPU3: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
> (XEN) Booting processor 4/1 eip 8c000
> (XEN) Initializing CPU#4
> (XEN) masked ExtINT on CPU#4
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 6144K
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU: Processor Core ID: 1
> (XEN) Intel machine check reporting enabled on CPU#4.
> (XEN) CPU4: Thermal monitoring enabled (TM2)
> (XEN) CMCI: CPU4 has no CMCI support
> (XEN) CPU4: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
> (XEN) Booting processor 5/3 eip 8c000
> (XEN) Initializing CPU#5
> (XEN) masked ExtINT on CPU#5
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 6144K
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU: Processor Core ID: 3
> (XEN) Intel machine check reporting enabled on CPU#5.
> (XEN) CPU5: Thermal monitoring enabled (TM2)
> (XEN) CMCI: CPU5 has no CMCI support
> (XEN) CPU5: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
> (XEN) Booting processor 6/5 eip 8c000
> (XEN) Initializing CPU#6
> (XEN) masked ExtINT on CPU#6
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 6144K
> (XEN) CPU: Physical Processor ID: 1
> (XEN) CPU: Processor Core ID: 1
> (XEN) Intel machine check reporting enabled on CPU#6.
> (XEN) CPU6: Thermal monitoring enabled (TM2)
> (XEN) CMCI: CPU6 has no CMCI support
> (XEN) CPU6: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
> (XEN) Booting processor 7/7 eip 8c000
> (XEN) Initializing CPU#7
> (XEN) masked ExtINT on CPU#7
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 6144K
> (XEN) CPU: Physical Processor ID: 1
> (XEN) CPU: Processor Core ID: 3
> (XEN) Intel machine check reporting enabled on CPU#7.
> (XEN) CPU7: Thermal monitoring enabled (TM2)
> (XEN) CMCI: CPU7 has no CMCI support
> (XEN) CPU7: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
> (XEN) Total of 8 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN)  -> Using new ACK method
> (XEN) init IO_APIC IRQs
> (XEN)  IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21,
> 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10,
> 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17, 9-18, 9-19, 9-20, 9-21, 9-22,
> 9-23 not connected.
> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
> (XEN) number of MP IRQ sources: 15.
> (XEN) number of IO-APIC #8 registers: 24.
> (XEN) number of IO-APIC #9 registers: 24.
> (XEN) testing the IO APIC.......................
> (XEN) IO APIC #8......
> (XEN) .... register #00: 08000000
> (XEN) .......    : physical APIC id: 08
> (XEN) .......    : Delivery Type: 0
> (XEN) .......    : LTS          : 0
> (XEN) .... register #01: 00170020
> (XEN) .......     : max redirection entries: 0017
> (XEN) .......     : PRQ implemented: 0
> (XEN) .......     : IO APIC version: 0020
> (XEN) .... IRQ redirection table:
> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> (XEN)  00 000 00  1    0    0   0   0    0    0    00
> (XEN)  01 001 01  0    0    0   0   0    1    1    20
> (XEN)  02 001 01  0    0    0   0   0    1    1    F0
> (XEN)  03 001 01  0    0    0   0   0    1    1    28
> (XEN)  04 001 01  0    0    0   0   0    1    1    30
> (XEN)  05 001 01  0    0    0   0   0    1    1    38
> (XEN)  06 001 01  0    0    0   0   0    1    1    40
> (XEN)  07 001 01  0    0    0   0   0    1    1    48
> (XEN)  08 001 01  0    0    0   0   0    1    1    50
> (XEN)  09 001 01  1    1    0   0   0    1    1    58
> (XEN)  0a 001 01  0    0    0   0   0    1    1    60
> (XEN)  0b 001 01  0    0    0   0   0    1    1    68
> (XEN)  0c 001 01  0    0    0   0   0    1    1    70
> (XEN)  0d 001 01  0    0    0   0   0    1    1    78
> (XEN)  0e 001 01  0    0    0   0   0    1    1    88
> (XEN)  0f 001 01  0    0    0   0   0    1    1    90
> (XEN)  10 000 00  1    0    0   0   0    0    0    00
> (XEN)  11 000 00  1    0    0   0   0    0    0    00
> (XEN)  12 000 00  1    0    0   0   0    0    0    00
> (XEN)  13 000 00  1    0    0   0   0    0    0    00
> (XEN)  14 000 00  1    0    0   0   0    0    0    00
> (XEN)  15 000 00  1    0    0   0   0    0    0    00
> (XEN)  16 000 00  1    0    0   0   0    0    0    00
> (XEN)  17 000 00  1    0    0   0   0    0    0    00
> (XEN) IO APIC #9......
> (XEN) .... register #00: 09000000
> (XEN) .......    : physical APIC id: 09
> (XEN) .......    : Delivery Type: 0
> (XEN) .......    : LTS          : 0
> (XEN) .... register #01: 00178020
> (XEN) .......     : max redirection entries: 0017
> (XEN) .......     : PRQ implemented: 1
> (XEN) .......     : IO APIC version: 0020
> (XEN) .... register #02: 09000000
> (XEN) .......     : arbitration: 09
> (XEN) .... register #03: 00000001
> (XEN) .......     : Boot DT    : 1
> (XEN) .... IRQ redirection table:
> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> (XEN)  00 000 00  1    0    0   0   0    0    0    00
> (XEN)  01 000 00  1    0    0   0   0    0    0    00
> (XEN)  02 000 00  1    0    0   0   0    0    0    00
> (XEN)  03 000 00  1    0    0   0   0    0    0    00
> (XEN)  04 000 00  1    0    0   0   0    0    0    00
> (XEN)  05 000 00  1    0    0   0   0    0    0    00
> (XEN)  06 000 00  1    0    0   0   0    0    0    00
> (XEN)  07 000 00  1    0    0   0   0    0    0    00
> (XEN)  08 000 00  1    0    0   0   0    0    0    00
> (XEN)  09 000 00  1    0    0   0   0    0    0    00
> (XEN)  0a 000 00  1    0    0   0   0    0    0    00
> (XEN)  0b 000 00  1    0    0   0   0    0    0    00
> (XEN)  0c 000 00  1    0    0   0   0    0    0    00
> (XEN)  0d 000 00  1    0    0   0   0    0    0    00
> (XEN)  0e 000 00  1    0    0   0   0    0    0    00
> (XEN)  0f 000 00  1    0    0   0   0    0    0    00
> (XEN)  10 000 00  1    0    0   0   0    0    0    00
> (XEN)  11 000 00  1    0    0   0   0    0    0    00
> (XEN)  12 000 00  1    0    0   0   0    0    0    00
> (XEN)  13 000 00  1    0    0   0   0    0    0    00
> (XEN)  14 000 00  1    0    0   0   0    0    0    00
> (XEN)  15 000 00  1    0    0   0   0    0    0    00
> (XEN)  16 000 00  1    0    0   0   0    0    0    00
> (XEN)  17 000 00  1    0    0   0   0    0    0    00
> (XEN) Using vector-based indexing
> (XEN) IRQ to pin mappings:
> (XEN) IRQ240 -> 0:2
> (XEN) IRQ32 -> 0:1
> (XEN) IRQ40 -> 0:3
> (XEN) IRQ48 -> 0:4
> (XEN) IRQ56 -> 0:5
> (XEN) IRQ64 -> 0:6
> (XEN) IRQ72 -> 0:7
> (XEN) IRQ80 -> 0:8
> (XEN) IRQ88 -> 0:9
> (XEN) IRQ96 -> 0:10
> (XEN) IRQ104 -> 0:11
> (XEN) IRQ112 -> 0:12
> (XEN) IRQ120 -> 0:13
> (XEN) IRQ136 -> 0:14
> (XEN) IRQ144 -> 0:15
> (XEN) .................................... done.
> (XEN) Using local APIC timer interrupts.
> (XEN) calibrating APIC timer ...
> (XEN) ..... CPU clock speed is 2327.5697 MHz.
> (XEN) ..... host bus clock speed is 332.5098 MHz.
> (XEN) ..... bus_scale = 0x00015489
> (XEN) checking TSC synchronization across 8 CPUs: passed.
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) Brought up 8 CPUs
> (XEN) I/O virtualisation disabled
> (XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
> (XEN) ACPI sleep modes: S3
> (XEN) mcheck_poll: Machine check polling timer started.
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN)  Xen  kernel: 64-bit, lsb, compat32
> (XEN)  Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 ->
> 0xffffffff8074310c
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   0000000256000000->0000000258000000 (253952 pages
> to be allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN)  Loaded kernel: ffffffff80200000->ffffffff8074310c
> (XEN)  Init. ramdisk: ffffffff80744000->ffffffff80f63a00
> (XEN)  Phys-Mach map: ffffffff80f64000->ffffffff81164000
> (XEN)  Start info:    ffffffff81164000->ffffffff811644b4
> (XEN)  Page tables:   ffffffff81165000->ffffffff81172000
> (XEN)  Boot stack:    ffffffff81172000->ffffffff81173000
> (XEN)  TOTAL:         ffffffff80000000->ffffffff81400000
> (XEN)  ENTRY ADDRESS: ffffffff80200000
> (XEN) Dom0 has maximum 1 VCPUs
> (XEN) Scrubbing Free
> RAM:
......................................................................done.
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: All
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three
times to switch
> input to Xen)
> (XEN) Freed 124kB init memory.
> 
> ===========================================> 
> [root@b52 ~]# xenpm get-cpuidle-states
> Max C-state: C7
> 
> cpu id               : 0
> total C-states       : 0
> idle time(ms)        : 0
> 
> cpu id               : 1
> total C-states       : 0
> idle time(ms)        : 0
> 
> cpu id               : 2
> total C-states       : 0
> idle time(ms)        : 0
> 
> cpu id               : 3
> total C-states       : 0
> idle time(ms)        : 0
> 
> cpu id               : 4
> total C-states       : 0
> idle time(ms)        : 0
> 
> cpu id               : 5
> total C-states       : 0
> idle time(ms)        : 0
> 
> cpu id               : 6
> total C-states       : 0
> idle time(ms)        : 0
> 
> cpu id               : 7
> total C-states       : 0
> idle time(ms)        : 0
> 
> [root@b52 ~]# xenpm get-cpufreq-states
> [root@b52 ~]# xenpm get-cpufreq-para
> [CPU0] failed to get cpufreq parameter
> [CPU1] failed to get cpufreq parameter
> [CPU2] failed to get cpufreq parameter
> [CPU3] failed to get cpufreq parameter
> [CPU4] failed to get cpufreq parameter
> [CPU5] failed to get cpufreq parameter
> [CPU6] failed to get cpufreq parameter
> [CPU7] failed to get cpufreq parameter
> 
> 
> Thanks
> 
> Mike

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Keir Fraser

2009-Jun-04 07:47 UTC

head link

Re: [Xen-devel] [Fwd: Problems with power management]

Your best bet tool here is ''hg -v history tools/misc/xenpm.c |
less'' and
pick one of the developers of the component. In this case Wei Gang would be
plausible (cc''ed).

 -- Keir

On 04/06/2009 06:40, "Mike Brady" <mike.brady@devnull.net.nz>
wrote:
> I posted this on the user list but it has been suggested to me that it
> may pay to ask on the devel list as well as I didn''t get any
responses.
> 
> Thanks
> 
> Mike
> 
> -------- Forwarded Message --------
>> From: Mike Brady <mike.brady@devnull.net.nz>
>> Reply-To: mike.brady@devnull.net.nz
>> To: xen-users@lists.xensource.com <xen-users@lists.xensource.com>
>> Subject: Problems with power management
>> Date: Sat, 30 May 2009 16:28:11 +1200
>> 
>> I do not seem to be able to get any where with the power management
>> functions. I have had a look at the xenpm Wiki page, but it
hasn''t
>> helped.  Its probably something completely obvious, but I
can''t see it.
>> 
>> I running Xen 3.4.0 on Centos 5.3 x86_64 using the gitco RPMs on an
>> Intel S5000PSL motherboard with 2 x Xeon 5410s.  Dom0 is running the
>> latest Centos 5.3 kernel.
>> 
>> My xm dmesg output is below followed by the output that I get from the
>> xenpm get* commands, which isn''t much.
>> 
>> ===========================================>> [root@b52 ~]# xm
dmesg
>>  __  __            _____ _  _    ___
>>  \ \/ /___ _ __   |___ /| || |  / _ \
>>   \  // _ \ ''_ \    |_ \| || |_| | | |
>>   /  \  __/ | | |  ___) |__   _| |_| |
>>  /_/\_\___|_| |_| |____(_) |_|(_)___/
>> 
>> (XEN) Xen version 3.4.0 (root@gitco.tld) (gcc version 4.1.2 20080704
>> (Red Hat 4.1.2-44)) Wed May 27 21:53:09 CEST 2009
>> (XEN) Latest ChangeSet: unavailable
>> (XEN) Command line: cpufreq=xen cpuidle dom0_max_vcpus=1
>> dom0_vcpus_pin=true dom0_mem=1024M apic_verbosity=verbose loglvl=all
>> (XEN) Video information:
>> (XEN)  VGA is text mode 80x25, font 8x16
>> (XEN)  VBE/DDC methods: none; EDID transfer time: 2 seconds
>> (XEN)  EDID info not retrieved because no DDC retrieval method detected
>> (XEN) Disc information:
>> (XEN)  Found 2 MBR signatures
>> (XEN)  Found 2 EDD information structures
>> (XEN) Xen-e820 RAM map:
>> (XEN)  0000000000000000 - 000000000009f400 (usable)
>> (XEN)  000000000009f400 - 0000000000100000 (reserved)
>> (XEN)  0000000000100000 - 000000009e2e1000 (usable)
>> (XEN)  000000009e2e1000 - 000000009e3a3000 (ACPI NVS)
>> (XEN)  000000009e3a3000 - 000000009fa32000 (usable)
>> (XEN)  000000009fa32000 - 000000009fa9a000 (reserved)
>> (XEN)  000000009fa9a000 - 000000009faac000 (usable)
>> (XEN)  000000009faac000 - 000000009fb1a000 (ACPI NVS)
>> (XEN)  000000009fb1a000 - 000000009fb26000 (usable)
>> (XEN)  000000009fb26000 - 000000009fb3a000 (ACPI data)
>> (XEN)  000000009fb3a000 - 000000009fc00000 (usable)
>> (XEN)  000000009fc00000 - 00000000b0000000 (reserved)
>> (XEN)  00000000ffc00000 - 00000000ffc0c000 (reserved)
>> (XEN)  0000000100000000 - 0000000260000000 (usable)
>> (XEN) System RAM: 8185MB (8382412kB)
>> (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
>> (XEN) ACPI: XSDT 9FB39120, 0084 (r1 INTEL  S5000PSL        0 INTL
>> 1000013)
>> (XEN) ACPI: FACP 9FB37000, 00F4 (r3 INTEL  S5000PSL        0 INTL
>> 1000013)
>> (XEN) ACPI: DSDT 9FB30000, 57F6 (r2 INTEL  S5000PSL        1 INTL
>> 1000013)
>> (XEN) ACPI: FACS 9FAAC000, 0040
>> (XEN) ACPI: APIC 9FB36000, 00C8 (r1 INTEL  S5000PSL        0 INTL
>> 1000013)
>> (XEN) ACPI: SPCR 9FB2F000, 0050 (r1 INTEL  S5000PSL        0 INTL
>> 1000013)
>> (XEN) ACPI: HPET 9FB2E000, 0038 (r1 INTEL  S5000PSL        1 INTL
>> 1000013)
>> (XEN) ACPI: MCFG 9FB2D000, 003C (r1 INTEL  S5000PSL        1 INTL
>> 1000013)
>> (XEN) ACPI: SSDT 9FB2C000, 0A14 (r2 INTEL  EIST         4000 INTL
>> 1000013)
>> (XEN) ACPI: SSDT 9FB2B000, 0193 (r2 INTEL  IPMI         4000 INTL
>> 1000013)
>> (XEN) ACPI: SSDT 9FB2A000, 00CE (r2 INTEL  CST          4000 INTL
>> 1000013)
>> (XEN) ACPI: HEST 9FB29000, 00A8 (r1 INTEL  S5000PSL        1 INTL
>> 1)
>> (XEN) ACPI: BERT 9FB28000, 0030 (r1 INTEL  S5000PSL        1 INTL
>> 1)
>> (XEN) ACPI: ERST 9FB27000, 0230 (r1 INTEL  S5000PSL        1 INTL
>> 1)
>> (XEN) ACPI: EINJ 9FB26000, 0130 (r1 INTEL  S5000PSL        1 INTL
>> 1)
>> (XEN) NUMA turned off
>> (XEN) Faking a node at 0000000000000000-0000000260000000
>> (XEN) Domain heap initialised
>> (XEN) found SMP MP-table at 000fd190
>> (XEN) DMI 2.5 present.
>> (XEN) Using APIC driver default
>> (XEN) ACPI: PM-Timer IO Port: 0x408
>> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
>> (XEN) ACPI:                  wakeup_vec[9faac00c], vec_size[20]
>> (XEN) ACPI: Local APIC address 0xfee00000
>> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> (XEN) Processor #0 7:7 APIC version 20
>> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>> (XEN) Processor #2 7:7 APIC version 20
>> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>> (XEN) Processor #4 7:7 APIC version 20
>> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
>> (XEN) Processor #6 7:7 APIC version 20
>> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
>> (XEN) Processor #1 7:7 APIC version 20
>> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
>> (XEN) Processor #3 7:7 APIC version 20
>> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>> (XEN) Processor #5 7:7 APIC version 20
>> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>> (XEN) Processor #7 7:7 APIC version 20
>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
>> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>> (XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>> (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> (XEN) ACPI: IRQ0 used by override.
>> (XEN) ACPI: IRQ2 used by override.
>> (XEN) ACPI: IRQ9 used by override.
>> (XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
>> (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
>> (XEN) Using ACPI (MADT) for SMP configuration information
>> (XEN) mapped APIC to ffff828bffffe000 (fee00000)
>> (XEN) mapped IOAPIC to ffff828bffffd000 (fec00000)
>> (XEN) mapped IOAPIC to ffff828bffffc000 (fec80000)
>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>> (XEN) Initializing CPU#0
>> (XEN) Detected 2327.591 MHz processor.
>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>> (XEN) CPU: L2 cache: 6144K
>> (XEN) CPU: Physical Processor ID: 0
>> (XEN) CPU: Processor Core ID: 0
>> (XEN) VMX: Supported advanced features:
>> (XEN)  - APIC MMIO access virtualisation
>> (XEN)  - APIC TPR shadow
>> (XEN)  - Virtual NMI
>> (XEN)  - MSR direct-access bitmap
>> (XEN) HVM: VMX enabled
>> (XEN) Intel machine check reporting enabled on CPU#0.
>> (XEN) CPU0: Thermal monitoring enabled (TM2)
>> (XEN) CMCI: CPU0 has no CMCI support
>> (XEN) CPU0: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
>> (XEN) enabled ExtINT on CPU#0
>> (XEN) Booting processor 1/2 eip 8c000
>> (XEN) Initializing CPU#1
>> (XEN) masked ExtINT on CPU#1
>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>> (XEN) CPU: L2 cache: 6144K
>> (XEN) CPU: Physical Processor ID: 0
>> (XEN) CPU: Processor Core ID: 2
>> (XEN) Intel machine check reporting enabled on CPU#1.
>> (XEN) CPU1: Thermal monitoring enabled (TM2)
>> (XEN) CMCI: CPU1 has no CMCI support
>> (XEN) CPU1: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
>> (XEN) Booting processor 2/4 eip 8c000
>> (XEN) Initializing CPU#2
>> (XEN) masked ExtINT on CPU#2
>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>> (XEN) CPU: L2 cache: 6144K
>> (XEN) CPU: Physical Processor ID: 1
>> (XEN) CPU: Processor Core ID: 0
>> (XEN) Intel machine check reporting enabled on CPU#2.
>> (XEN) CPU2: Thermal monitoring enabled (TM2)
>> (XEN) CMCI: CPU2 has no CMCI support
>> (XEN) CPU2: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
>> (XEN) Booting processor 3/6 eip 8c000
>> (XEN) Initializing CPU#3
>> (XEN) masked ExtINT on CPU#3
>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>> (XEN) CPU: L2 cache: 6144K
>> (XEN) CPU: Physical Processor ID: 1
>> (XEN) CPU: Processor Core ID: 2
>> (XEN) Intel machine check reporting enabled on CPU#3.
>> (XEN) CPU3: Thermal monitoring enabled (TM2)
>> (XEN) CMCI: CPU3 has no CMCI support
>> (XEN) CPU3: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
>> (XEN) Booting processor 4/1 eip 8c000
>> (XEN) Initializing CPU#4
>> (XEN) masked ExtINT on CPU#4
>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>> (XEN) CPU: L2 cache: 6144K
>> (XEN) CPU: Physical Processor ID: 0
>> (XEN) CPU: Processor Core ID: 1
>> (XEN) Intel machine check reporting enabled on CPU#4.
>> (XEN) CPU4: Thermal monitoring enabled (TM2)
>> (XEN) CMCI: CPU4 has no CMCI support
>> (XEN) CPU4: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
>> (XEN) Booting processor 5/3 eip 8c000
>> (XEN) Initializing CPU#5
>> (XEN) masked ExtINT on CPU#5
>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>> (XEN) CPU: L2 cache: 6144K
>> (XEN) CPU: Physical Processor ID: 0
>> (XEN) CPU: Processor Core ID: 3
>> (XEN) Intel machine check reporting enabled on CPU#5.
>> (XEN) CPU5: Thermal monitoring enabled (TM2)
>> (XEN) CMCI: CPU5 has no CMCI support
>> (XEN) CPU5: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
>> (XEN) Booting processor 6/5 eip 8c000
>> (XEN) Initializing CPU#6
>> (XEN) masked ExtINT on CPU#6
>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>> (XEN) CPU: L2 cache: 6144K
>> (XEN) CPU: Physical Processor ID: 1
>> (XEN) CPU: Processor Core ID: 1
>> (XEN) Intel machine check reporting enabled on CPU#6.
>> (XEN) CPU6: Thermal monitoring enabled (TM2)
>> (XEN) CMCI: CPU6 has no CMCI support
>> (XEN) CPU6: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
>> (XEN) Booting processor 7/7 eip 8c000
>> (XEN) Initializing CPU#7
>> (XEN) masked ExtINT on CPU#7
>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>> (XEN) CPU: L2 cache: 6144K
>> (XEN) CPU: Physical Processor ID: 1
>> (XEN) CPU: Processor Core ID: 3
>> (XEN) Intel machine check reporting enabled on CPU#7.
>> (XEN) CPU7: Thermal monitoring enabled (TM2)
>> (XEN) CMCI: CPU7 has no CMCI support
>> (XEN) CPU7: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
>> (XEN) Total of 8 processors activated.
>> (XEN) ENABLING IO-APIC IRQs
>> (XEN)  -> Using new ACK method
>> (XEN) init IO_APIC IRQs
>> (XEN)  IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21,
>> 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10,
>> 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17, 9-18, 9-19, 9-20, 9-21, 9-22,
>> 9-23 not connected.
>> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
>> (XEN) number of MP IRQ sources: 15.
>> (XEN) number of IO-APIC #8 registers: 24.
>> (XEN) number of IO-APIC #9 registers: 24.
>> (XEN) testing the IO APIC.......................
>> (XEN) IO APIC #8......
>> (XEN) .... register #00: 08000000
>> (XEN) .......    : physical APIC id: 08
>> (XEN) .......    : Delivery Type: 0
>> (XEN) .......    : LTS          : 0
>> (XEN) .... register #01: 00170020
>> (XEN) .......     : max redirection entries: 0017
>> (XEN) .......     : PRQ implemented: 0
>> (XEN) .......     : IO APIC version: 0020
>> (XEN) .... IRQ redirection table:
>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
>> (XEN)  01 001 01  0    0    0   0   0    1    1    20
>> (XEN)  02 001 01  0    0    0   0   0    1    1    F0
>> (XEN)  03 001 01  0    0    0   0   0    1    1    28
>> (XEN)  04 001 01  0    0    0   0   0    1    1    30
>> (XEN)  05 001 01  0    0    0   0   0    1    1    38
>> (XEN)  06 001 01  0    0    0   0   0    1    1    40
>> (XEN)  07 001 01  0    0    0   0   0    1    1    48
>> (XEN)  08 001 01  0    0    0   0   0    1    1    50
>> (XEN)  09 001 01  1    1    0   0   0    1    1    58
>> (XEN)  0a 001 01  0    0    0   0   0    1    1    60
>> (XEN)  0b 001 01  0    0    0   0   0    1    1    68
>> (XEN)  0c 001 01  0    0    0   0   0    1    1    70
>> (XEN)  0d 001 01  0    0    0   0   0    1    1    78
>> (XEN)  0e 001 01  0    0    0   0   0    1    1    88
>> (XEN)  0f 001 01  0    0    0   0   0    1    1    90
>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
>> (XEN) IO APIC #9......
>> (XEN) .... register #00: 09000000
>> (XEN) .......    : physical APIC id: 09
>> (XEN) .......    : Delivery Type: 0
>> (XEN) .......    : LTS          : 0
>> (XEN) .... register #01: 00178020
>> (XEN) .......     : max redirection entries: 0017
>> (XEN) .......     : PRQ implemented: 1
>> (XEN) .......     : IO APIC version: 0020
>> (XEN) .... register #02: 09000000
>> (XEN) .......     : arbitration: 09
>> (XEN) .... register #03: 00000001
>> (XEN) .......     : Boot DT    : 1
>> (XEN) .... IRQ redirection table:
>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
>> (XEN)  01 000 00  1    0    0   0   0    0    0    00
>> (XEN)  02 000 00  1    0    0   0   0    0    0    00
>> (XEN)  03 000 00  1    0    0   0   0    0    0    00
>> (XEN)  04 000 00  1    0    0   0   0    0    0    00
>> (XEN)  05 000 00  1    0    0   0   0    0    0    00
>> (XEN)  06 000 00  1    0    0   0   0    0    0    00
>> (XEN)  07 000 00  1    0    0   0   0    0    0    00
>> (XEN)  08 000 00  1    0    0   0   0    0    0    00
>> (XEN)  09 000 00  1    0    0   0   0    0    0    00
>> (XEN)  0a 000 00  1    0    0   0   0    0    0    00
>> (XEN)  0b 000 00  1    0    0   0   0    0    0    00
>> (XEN)  0c 000 00  1    0    0   0   0    0    0    00
>> (XEN)  0d 000 00  1    0    0   0   0    0    0    00
>> (XEN)  0e 000 00  1    0    0   0   0    0    0    00
>> (XEN)  0f 000 00  1    0    0   0   0    0    0    00
>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
>> (XEN) Using vector-based indexing
>> (XEN) IRQ to pin mappings:
>> (XEN) IRQ240 -> 0:2
>> (XEN) IRQ32 -> 0:1
>> (XEN) IRQ40 -> 0:3
>> (XEN) IRQ48 -> 0:4
>> (XEN) IRQ56 -> 0:5
>> (XEN) IRQ64 -> 0:6
>> (XEN) IRQ72 -> 0:7
>> (XEN) IRQ80 -> 0:8
>> (XEN) IRQ88 -> 0:9
>> (XEN) IRQ96 -> 0:10
>> (XEN) IRQ104 -> 0:11
>> (XEN) IRQ112 -> 0:12
>> (XEN) IRQ120 -> 0:13
>> (XEN) IRQ136 -> 0:14
>> (XEN) IRQ144 -> 0:15
>> (XEN) .................................... done.
>> (XEN) Using local APIC timer interrupts.
>> (XEN) calibrating APIC timer ...
>> (XEN) ..... CPU clock speed is 2327.5697 MHz.
>> (XEN) ..... host bus clock speed is 332.5098 MHz.
>> (XEN) ..... bus_scale = 0x00015489
>> (XEN) checking TSC synchronization across 8 CPUs: passed.
>> (XEN) Platform timer is 14.318MHz HPET
>> (XEN) Brought up 8 CPUs
>> (XEN) I/O virtualisation disabled
>> (XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
>> (XEN) ACPI sleep modes: S3
>> (XEN) mcheck_poll: Machine check polling timer started.
>> (XEN) *** LOADING DOMAIN 0 ***
>> (XEN)  Xen  kernel: 64-bit, lsb, compat32
>> (XEN)  Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 ->
>> 0xffffffff8074310c
>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>> (XEN)  Dom0 alloc.:   0000000256000000->0000000258000000 (253952
pages
>> to be allocated)
>> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>> (XEN)  Loaded kernel: ffffffff80200000->ffffffff8074310c
>> (XEN)  Init. ramdisk: ffffffff80744000->ffffffff80f63a00
>> (XEN)  Phys-Mach map: ffffffff80f64000->ffffffff81164000
>> (XEN)  Start info:    ffffffff81164000->ffffffff811644b4
>> (XEN)  Page tables:   ffffffff81165000->ffffffff81172000
>> (XEN)  Boot stack:    ffffffff81172000->ffffffff81173000
>> (XEN)  TOTAL:         ffffffff80000000->ffffffff81400000
>> (XEN)  ENTRY ADDRESS: ffffffff80200000
>> (XEN) Dom0 has maximum 1 VCPUs
>> (XEN) Scrubbing Free
>> RAM: 
>>
......................................................................done.
>> (XEN) Xen trace buffers: disabled
>> (XEN) Std. Loglevel: All
>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
>> (XEN) Xen is relinquishing VGA console.
>> (XEN) *** Serial input -> DOM0 (type ''CTRL-a''
three times to switch
>> input to Xen)
>> (XEN) Freed 124kB init memory.
>> 
>> ===========================================>> 
>> [root@b52 ~]# xenpm get-cpuidle-states
>> Max C-state: C7
>> 
>> cpu id               : 0
>> total C-states       : 0
>> idle time(ms)        : 0
>> 
>> cpu id               : 1
>> total C-states       : 0
>> idle time(ms)        : 0
>> 
>> cpu id               : 2
>> total C-states       : 0
>> idle time(ms)        : 0
>> 
>> cpu id               : 3
>> total C-states       : 0
>> idle time(ms)        : 0
>> 
>> cpu id               : 4
>> total C-states       : 0
>> idle time(ms)        : 0
>> 
>> cpu id               : 5
>> total C-states       : 0
>> idle time(ms)        : 0
>> 
>> cpu id               : 6
>> total C-states       : 0
>> idle time(ms)        : 0
>> 
>> cpu id               : 7
>> total C-states       : 0
>> idle time(ms)        : 0
>> 
>> [root@b52 ~]# xenpm get-cpufreq-states
>> [root@b52 ~]# xenpm get-cpufreq-para
>> [CPU0] failed to get cpufreq parameter
>> [CPU1] failed to get cpufreq parameter
>> [CPU2] failed to get cpufreq parameter
>> [CPU3] failed to get cpufreq parameter
>> [CPU4] failed to get cpufreq parameter
>> [CPU5] failed to get cpufreq parameter
>> [CPU6] failed to get cpufreq parameter
>> [CPU7] failed to get cpufreq parameter
>> 
>> 
>> Thanks
>> 
>> Mike
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Wei, Gang

2009-Jun-04 08:41 UTC

head link

RE: [Xen-devel] [Fwd: Problems with power management]

Hi, Mike,

Are there any BIOS options in your box related with C-states or P-states? These
may be disabled.

Or can you try the native Linux first to make sure you can see the PM effect?

Further, if you can rebuild Xen yourself, please turn on the C/P state debug
flag ( e.g. uncomment/*#define DEBUG_PM_CX*/ in cpu_idle.c) , and repost the
serial log for more detail info.

Jimmy
>-----Original Message-----
>From: Keir Fraser [mailto:keir.fraser@eu.citrix.com]
>Sent: 2009年6月4日 15:47
>To: mike.brady@devnull.net.nz; xen-devel
>Cc: Wei, Gang
>Subject: Re: [Xen-devel] [Fwd: Problems with power management]
>
>Your best bet tool here is 'hg -v history tools/misc/xenpm.c | less'
and
>pick one of the developers of the component. In this case Wei Gang would be
>plausible (cc'ed).
>
> -- Keir
>
>On 04/06/2009 06:40, "Mike Brady"
<mike.brady@devnull.net.nz> wrote:
>
>> I posted this on the user list but it has been suggested to me that it
>> may pay to ask on the devel list as well as I didn't get any
responses.
>>
>> Thanks
>>
>> Mike
>>
>> -------- Forwarded Message --------
>>> From: Mike Brady <mike.brady@devnull.net.nz>
>>> Reply-To: mike.brady@devnull.net.nz
>>> To: xen-users@lists.xensource.com
<xen-users@lists.xensource.com>
>>> Subject: Problems with power management
>>> Date: Sat, 30 May 2009 16:28:11 +1200
>>>
>>> I do not seem to be able to get any where with the power management
>>> functions. I have had a look at the xenpm Wiki page, but it
hasn't
>>> helped.  Its probably something completely obvious, but I can't
see it.
>>>
>>> I running Xen 3.4.0 on Centos 5.3 x86_64 using the gitco RPMs on an
>>> Intel S5000PSL motherboard with 2 x Xeon 5410s.  Dom0 is running
the
>>> latest Centos 5.3 kernel.
>>>
>>> My xm dmesg output is below followed by the output that I get from
the
>>> xenpm get* commands, which isn't much.
>>>
>>> ===========================================>>> [root@b52
~]# xm dmesg
>>>  __  __            _____ _  _    ___
>>>  \ \/ /___ _ __   |___ /| || |  / _ \
>>>   \  // _ \ '_ \    |_ \| || |_| | | |
>>>   /  \  __/ | | |  ___) |__   _| |_| |
>>>  /_/\_\___|_| |_| |____(_) |_|(_)___/
>>>
>>> (XEN) Xen version 3.4.0 (root@gitco.tld) (gcc version 4.1.2
20080704
>>> (Red Hat 4.1.2-44)) Wed May 27 21:53:09 CEST 2009
>>> (XEN) Latest ChangeSet: unavailable
>>> (XEN) Command line: cpufreq=xen cpuidle dom0_max_vcpus=1
>>> dom0_vcpus_pin=true dom0_mem=1024M apic_verbosity=verbose
loglvl=all
>>> (XEN) Video information:
>>> (XEN)  VGA is text mode 80x25, font 8x16
>>> (XEN)  VBE/DDC methods: none; EDID transfer time: 2 seconds
>>> (XEN)  EDID info not retrieved because no DDC retrieval method
detected
>>> (XEN) Disc information:
>>> (XEN)  Found 2 MBR signatures
>>> (XEN)  Found 2 EDD information structures
>>> (XEN) Xen-e820 RAM map:
>>> (XEN)  0000000000000000 - 000000000009f400 (usable)
>>> (XEN)  000000000009f400 - 0000000000100000 (reserved)
>>> (XEN)  0000000000100000 - 000000009e2e1000 (usable)
>>> (XEN)  000000009e2e1000 - 000000009e3a3000 (ACPI NVS)
>>> (XEN)  000000009e3a3000 - 000000009fa32000 (usable)
>>> (XEN)  000000009fa32000 - 000000009fa9a000 (reserved)
>>> (XEN)  000000009fa9a000 - 000000009faac000 (usable)
>>> (XEN)  000000009faac000 - 000000009fb1a000 (ACPI NVS)
>>> (XEN)  000000009fb1a000 - 000000009fb26000 (usable)
>>> (XEN)  000000009fb26000 - 000000009fb3a000 (ACPI data)
>>> (XEN)  000000009fb3a000 - 000000009fc00000 (usable)
>>> (XEN)  000000009fc00000 - 00000000b0000000 (reserved)
>>> (XEN)  00000000ffc00000 - 00000000ffc0c000 (reserved)
>>> (XEN)  0000000100000000 - 0000000260000000 (usable)
>>> (XEN) System RAM: 8185MB (8382412kB)
>>> (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
>>> (XEN) ACPI: XSDT 9FB39120, 0084 (r1 INTEL  S5000PSL        0 INTL
>>> 1000013)
>>> (XEN) ACPI: FACP 9FB37000, 00F4 (r3 INTEL  S5000PSL        0 INTL
>>> 1000013)
>>> (XEN) ACPI: DSDT 9FB30000, 57F6 (r2 INTEL  S5000PSL        1 INTL
>>> 1000013)
>>> (XEN) ACPI: FACS 9FAAC000, 0040
>>> (XEN) ACPI: APIC 9FB36000, 00C8 (r1 INTEL  S5000PSL        0 INTL
>>> 1000013)
>>> (XEN) ACPI: SPCR 9FB2F000, 0050 (r1 INTEL  S5000PSL        0 INTL
>>> 1000013)
>>> (XEN) ACPI: HPET 9FB2E000, 0038 (r1 INTEL  S5000PSL        1 INTL
>>> 1000013)
>>> (XEN) ACPI: MCFG 9FB2D000, 003C (r1 INTEL  S5000PSL        1 INTL
>>> 1000013)
>>> (XEN) ACPI: SSDT 9FB2C000, 0A14 (r2 INTEL  EIST         4000 INTL
>>> 1000013)
>>> (XEN) ACPI: SSDT 9FB2B000, 0193 (r2 INTEL  IPMI         4000 INTL
>>> 1000013)
>>> (XEN) ACPI: SSDT 9FB2A000, 00CE (r2 INTEL  CST          4000 INTL
>>> 1000013)
>>> (XEN) ACPI: HEST 9FB29000, 00A8 (r1 INTEL  S5000PSL        1 INTL
>>> 1)
>>> (XEN) ACPI: BERT 9FB28000, 0030 (r1 INTEL  S5000PSL        1 INTL
>>> 1)
>>> (XEN) ACPI: ERST 9FB27000, 0230 (r1 INTEL  S5000PSL        1 INTL
>>> 1)
>>> (XEN) ACPI: EINJ 9FB26000, 0130 (r1 INTEL  S5000PSL        1 INTL
>>> 1)
>>> (XEN) NUMA turned off
>>> (XEN) Faking a node at 0000000000000000-0000000260000000
>>> (XEN) Domain heap initialised
>>> (XEN) found SMP MP-table at 000fd190
>>> (XEN) DMI 2.5 present.
>>> (XEN) Using APIC driver default
>>> (XEN) ACPI: PM-Timer IO Port: 0x408
>>> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
>>> (XEN) ACPI:                  wakeup_vec[9faac00c], vec_size[20]
>>> (XEN) ACPI: Local APIC address 0xfee00000
>>> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>>> (XEN) Processor #0 7:7 APIC version 20
>>> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>>> (XEN) Processor #2 7:7 APIC version 20
>>> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>>> (XEN) Processor #4 7:7 APIC version 20
>>> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
>>> (XEN) Processor #6 7:7 APIC version 20
>>> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
>>> (XEN) Processor #1 7:7 APIC version 20
>>> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
>>> (XEN) Processor #3 7:7 APIC version 20
>>> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>>> (XEN) Processor #5 7:7 APIC version 20
>>> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>>> (XEN) Processor #7 7:7 APIC version 20
>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
>>> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
0-23
>>> (XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>>> (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI
24-47
>>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>> (XEN) ACPI: IRQ0 used by override.
>>> (XEN) ACPI: IRQ2 used by override.
>>> (XEN) ACPI: IRQ9 used by override.
>>> (XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
>>> (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
>>> (XEN) Using ACPI (MADT) for SMP configuration information
>>> (XEN) mapped APIC to ffff828bffffe000 (fee00000)
>>> (XEN) mapped IOAPIC to ffff828bffffd000 (fec00000)
>>> (XEN) mapped IOAPIC to ffff828bffffc000 (fec80000)
>>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>>> (XEN) Initializing CPU#0
>>> (XEN) Detected 2327.591 MHz processor.
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 6144K
>>> (XEN) CPU: Physical Processor ID: 0
>>> (XEN) CPU: Processor Core ID: 0
>>> (XEN) VMX: Supported advanced features:
>>> (XEN)  - APIC MMIO access virtualisation
>>> (XEN)  - APIC TPR shadow
>>> (XEN)  - Virtual NMI
>>> (XEN)  - MSR direct-access bitmap
>>> (XEN) HVM: VMX enabled
>>> (XEN) Intel machine check reporting enabled on CPU#0.
>>> (XEN) CPU0: Thermal monitoring enabled (TM2)
>>> (XEN) CMCI: CPU0 has no CMCI support
>>> (XEN) CPU0: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>> (XEN) enabled ExtINT on CPU#0
>>> (XEN) Booting processor 1/2 eip 8c000
>>> (XEN) Initializing CPU#1
>>> (XEN) masked ExtINT on CPU#1
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 6144K
>>> (XEN) CPU: Physical Processor ID: 0
>>> (XEN) CPU: Processor Core ID: 2
>>> (XEN) Intel machine check reporting enabled on CPU#1.
>>> (XEN) CPU1: Thermal monitoring enabled (TM2)
>>> (XEN) CMCI: CPU1 has no CMCI support
>>> (XEN) CPU1: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>> (XEN) Booting processor 2/4 eip 8c000
>>> (XEN) Initializing CPU#2
>>> (XEN) masked ExtINT on CPU#2
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 6144K
>>> (XEN) CPU: Physical Processor ID: 1
>>> (XEN) CPU: Processor Core ID: 0
>>> (XEN) Intel machine check reporting enabled on CPU#2.
>>> (XEN) CPU2: Thermal monitoring enabled (TM2)
>>> (XEN) CMCI: CPU2 has no CMCI support
>>> (XEN) CPU2: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>> (XEN) Booting processor 3/6 eip 8c000
>>> (XEN) Initializing CPU#3
>>> (XEN) masked ExtINT on CPU#3
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 6144K
>>> (XEN) CPU: Physical Processor ID: 1
>>> (XEN) CPU: Processor Core ID: 2
>>> (XEN) Intel machine check reporting enabled on CPU#3.
>>> (XEN) CPU3: Thermal monitoring enabled (TM2)
>>> (XEN) CMCI: CPU3 has no CMCI support
>>> (XEN) CPU3: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>> (XEN) Booting processor 4/1 eip 8c000
>>> (XEN) Initializing CPU#4
>>> (XEN) masked ExtINT on CPU#4
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 6144K
>>> (XEN) CPU: Physical Processor ID: 0
>>> (XEN) CPU: Processor Core ID: 1
>>> (XEN) Intel machine check reporting enabled on CPU#4.
>>> (XEN) CPU4: Thermal monitoring enabled (TM2)
>>> (XEN) CMCI: CPU4 has no CMCI support
>>> (XEN) CPU4: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>> (XEN) Booting processor 5/3 eip 8c000
>>> (XEN) Initializing CPU#5
>>> (XEN) masked ExtINT on CPU#5
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 6144K
>>> (XEN) CPU: Physical Processor ID: 0
>>> (XEN) CPU: Processor Core ID: 3
>>> (XEN) Intel machine check reporting enabled on CPU#5.
>>> (XEN) CPU5: Thermal monitoring enabled (TM2)
>>> (XEN) CMCI: CPU5 has no CMCI support
>>> (XEN) CPU5: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>> (XEN) Booting processor 6/5 eip 8c000
>>> (XEN) Initializing CPU#6
>>> (XEN) masked ExtINT on CPU#6
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 6144K
>>> (XEN) CPU: Physical Processor ID: 1
>>> (XEN) CPU: Processor Core ID: 1
>>> (XEN) Intel machine check reporting enabled on CPU#6.
>>> (XEN) CPU6: Thermal monitoring enabled (TM2)
>>> (XEN) CMCI: CPU6 has no CMCI support
>>> (XEN) CPU6: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>> (XEN) Booting processor 7/7 eip 8c000
>>> (XEN) Initializing CPU#7
>>> (XEN) masked ExtINT on CPU#7
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 6144K
>>> (XEN) CPU: Physical Processor ID: 1
>>> (XEN) CPU: Processor Core ID: 3
>>> (XEN) Intel machine check reporting enabled on CPU#7.
>>> (XEN) CPU7: Thermal monitoring enabled (TM2)
>>> (XEN) CMCI: CPU7 has no CMCI support
>>> (XEN) CPU7: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>> (XEN) Total of 8 processors activated.
>>> (XEN) ENABLING IO-APIC IRQs
>>> (XEN)  -> Using new ACK method
>>> (XEN) init IO_APIC IRQs
>>> (XEN)  IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20,
8-21,
>>> 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10,
>>> 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17, 9-18, 9-19, 9-20, 9-21,
9-22,
>>> 9-23 not connected.
>>> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
>>> (XEN) number of MP IRQ sources: 15.
>>> (XEN) number of IO-APIC #8 registers: 24.
>>> (XEN) number of IO-APIC #9 registers: 24.
>>> (XEN) testing the IO APIC.......................
>>> (XEN) IO APIC #8......
>>> (XEN) .... register #00: 08000000
>>> (XEN) .......    : physical APIC id: 08
>>> (XEN) .......    : Delivery Type: 0
>>> (XEN) .......    : LTS          : 0
>>> (XEN) .... register #01: 00170020
>>> (XEN) .......     : max redirection entries: 0017
>>> (XEN) .......     : PRQ implemented: 0
>>> (XEN) .......     : IO APIC version: 0020
>>> (XEN) .... IRQ redirection table:
>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
>>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  01 001 01  0    0    0   0   0    1    1    20
>>> (XEN)  02 001 01  0    0    0   0   0    1    1    F0
>>> (XEN)  03 001 01  0    0    0   0   0    1    1    28
>>> (XEN)  04 001 01  0    0    0   0   0    1    1    30
>>> (XEN)  05 001 01  0    0    0   0   0    1    1    38
>>> (XEN)  06 001 01  0    0    0   0   0    1    1    40
>>> (XEN)  07 001 01  0    0    0   0   0    1    1    48
>>> (XEN)  08 001 01  0    0    0   0   0    1    1    50
>>> (XEN)  09 001 01  1    1    0   0   0    1    1    58
>>> (XEN)  0a 001 01  0    0    0   0   0    1    1    60
>>> (XEN)  0b 001 01  0    0    0   0   0    1    1    68
>>> (XEN)  0c 001 01  0    0    0   0   0    1    1    70
>>> (XEN)  0d 001 01  0    0    0   0   0    1    1    78
>>> (XEN)  0e 001 01  0    0    0   0   0    1    1    88
>>> (XEN)  0f 001 01  0    0    0   0   0    1    1    90
>>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
>>> (XEN) IO APIC #9......
>>> (XEN) .... register #00: 09000000
>>> (XEN) .......    : physical APIC id: 09
>>> (XEN) .......    : Delivery Type: 0
>>> (XEN) .......    : LTS          : 0
>>> (XEN) .... register #01: 00178020
>>> (XEN) .......     : max redirection entries: 0017
>>> (XEN) .......     : PRQ implemented: 1
>>> (XEN) .......     : IO APIC version: 0020
>>> (XEN) .... register #02: 09000000
>>> (XEN) .......     : arbitration: 09
>>> (XEN) .... register #03: 00000001
>>> (XEN) .......     : Boot DT    : 1
>>> (XEN) .... IRQ redirection table:
>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
>>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  01 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  02 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  03 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  04 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  05 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  06 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  07 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  08 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  09 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  0a 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  0b 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  0c 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  0d 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  0e 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  0f 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
>>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
>>> (XEN) Using vector-based indexing
>>> (XEN) IRQ to pin mappings:
>>> (XEN) IRQ240 -> 0:2
>>> (XEN) IRQ32 -> 0:1
>>> (XEN) IRQ40 -> 0:3
>>> (XEN) IRQ48 -> 0:4
>>> (XEN) IRQ56 -> 0:5
>>> (XEN) IRQ64 -> 0:6
>>> (XEN) IRQ72 -> 0:7
>>> (XEN) IRQ80 -> 0:8
>>> (XEN) IRQ88 -> 0:9
>>> (XEN) IRQ96 -> 0:10
>>> (XEN) IRQ104 -> 0:11
>>> (XEN) IRQ112 -> 0:12
>>> (XEN) IRQ120 -> 0:13
>>> (XEN) IRQ136 -> 0:14
>>> (XEN) IRQ144 -> 0:15
>>> (XEN) .................................... done.
>>> (XEN) Using local APIC timer interrupts.
>>> (XEN) calibrating APIC timer ...
>>> (XEN) ..... CPU clock speed is 2327.5697 MHz.
>>> (XEN) ..... host bus clock speed is 332.5098 MHz.
>>> (XEN) ..... bus_scale = 0x00015489
>>> (XEN) checking TSC synchronization across 8 CPUs: passed.
>>> (XEN) Platform timer is 14.318MHz HPET
>>> (XEN) Brought up 8 CPUs
>>> (XEN) I/O virtualisation disabled
>>> (XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
>>> (XEN) ACPI sleep modes: S3
>>> (XEN) mcheck_poll: Machine check polling timer started.
>>> (XEN) *** LOADING DOMAIN 0 ***
>>> (XEN)  Xen  kernel: 64-bit, lsb, compat32
>>> (XEN)  Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 ->
>>> 0xffffffff8074310c
>>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>> (XEN)  Dom0 alloc.:   0000000256000000->0000000258000000 (253952
pages
>>> to be allocated)
>>> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>>> (XEN)  Loaded kernel: ffffffff80200000->ffffffff8074310c
>>> (XEN)  Init. ramdisk: ffffffff80744000->ffffffff80f63a00
>>> (XEN)  Phys-Mach map: ffffffff80f64000->ffffffff81164000
>>> (XEN)  Start info:    ffffffff81164000->ffffffff811644b4
>>> (XEN)  Page tables:   ffffffff81165000->ffffffff81172000
>>> (XEN)  Boot stack:    ffffffff81172000->ffffffff81173000
>>> (XEN)  TOTAL:         ffffffff80000000->ffffffff81400000
>>> (XEN)  ENTRY ADDRESS: ffffffff80200000
>>> (XEN) Dom0 has maximum 1 VCPUs
>>> (XEN) Scrubbing Free
>>> RAM:
>>>
......................................................................do
>ne.
>>> (XEN) Xen trace buffers: disabled
>>> (XEN) Std. Loglevel: All
>>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
>>> (XEN) Xen is relinquishing VGA console.
>>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three
times to switch
>>> input to Xen)
>>> (XEN) Freed 124kB init memory.
>>>
>>> ===========================================>>>
>>> [root@b52 ~]# xenpm get-cpuidle-states
>>> Max C-state: C7
>>>
>>> cpu id               : 0
>>> total C-states       : 0
>>> idle time(ms)        : 0
>>>
>>> cpu id               : 1
>>> total C-states       : 0
>>> idle time(ms)        : 0
>>>
>>> cpu id               : 2
>>> total C-states       : 0
>>> idle time(ms)        : 0
>>>
>>> cpu id               : 3
>>> total C-states       : 0
>>> idle time(ms)        : 0
>>>
>>> cpu id               : 4
>>> total C-states       : 0
>>> idle time(ms)        : 0
>>>
>>> cpu id               : 5
>>> total C-states       : 0
>>> idle time(ms)        : 0
>>>
>>> cpu id               : 6
>>> total C-states       : 0
>>> idle time(ms)        : 0
>>>
>>> cpu id               : 7
>>> total C-states       : 0
>>> idle time(ms)        : 0
>>>
>>> [root@b52 ~]# xenpm get-cpufreq-states
>>> [root@b52 ~]# xenpm get-cpufreq-para
>>> [CPU0] failed to get cpufreq parameter
>>> [CPU1] failed to get cpufreq parameter
>>> [CPU2] failed to get cpufreq parameter
>>> [CPU3] failed to get cpufreq parameter
>>> [CPU4] failed to get cpufreq parameter
>>> [CPU5] failed to get cpufreq parameter
>>> [CPU6] failed to get cpufreq parameter
>>> [CPU7] failed to get cpufreq parameter
>>>
>>>
>>> Thanks
>>>
>>> Mike
>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Keir Fraser

2009-Jun-04 08:58 UTC

head link

Re: [Xen-devel] [Fwd: Problems with power management]

If that error message can mean ''no P states detected'' then
it''s not a very
good message! That should yield an informational message, not an error.

 -- Keir

On 04/06/2009 09:41, "Wei, Gang" <gang.wei@intel.com> wrote:
> Hi, Mike,
> 
> Are there any BIOS options in your box related with C-states or P-states?
> These may be disabled.
> 
> Or can you try the native Linux first to make sure you can see the PM
effect?
> 
> Further, if you can rebuild Xen yourself, please turn on the C/P state
debug
> flag ( e.g. uncomment/*#define DEBUG_PM_CX*/ in cpu_idle.c) , and repost
the
> serial log for more detail info.
> 
> Jimmy
> 
>> -----Original Message-----
>> From: Keir Fraser [mailto:keir.fraser@eu.citrix.com]
>> Sent: 2009年6月4日 15:47
>> To: mike.brady@devnull.net.nz; xen-devel
>> Cc: Wei, Gang
>> Subject: Re: [Xen-devel] [Fwd: Problems with power management]
>> 
>> Your best bet tool here is ''hg -v history tools/misc/xenpm.c |
less'' and
>> pick one of the developers of the component. In this case Wei Gang
would be
>> plausible (cc''ed).
>> 
>> -- Keir
>> 
>> On 04/06/2009 06:40, "Mike Brady"
<mike.brady@devnull.net.nz> wrote:
>> 
>>> I posted this on the user list but it has been suggested to me that
it
>>> may pay to ask on the devel list as well as I didn''t get
any responses.
>>> 
>>> Thanks
>>> 
>>> Mike
>>> 
>>> -------- Forwarded Message --------
>>>> From: Mike Brady <mike.brady@devnull.net.nz>
>>>> Reply-To: mike.brady@devnull.net.nz
>>>> To: xen-users@lists.xensource.com
<xen-users@lists.xensource.com>
>>>> Subject: Problems with power management
>>>> Date: Sat, 30 May 2009 16:28:11 +1200
>>>> 
>>>> I do not seem to be able to get any where with the power
management
>>>> functions. I have had a look at the xenpm Wiki page, but it
hasn''t
>>>> helped.  Its probably something completely obvious, but I
can''t see it.
>>>> 
>>>> I running Xen 3.4.0 on Centos 5.3 x86_64 using the gitco RPMs
on an
>>>> Intel S5000PSL motherboard with 2 x Xeon 5410s.  Dom0 is
running the
>>>> latest Centos 5.3 kernel.
>>>> 
>>>> My xm dmesg output is below followed by the output that I get
from the
>>>> xenpm get* commands, which isn''t much.
>>>> 
>>>> ===========================================>>>>
[root@b52 ~]# xm dmesg
>>>>  __  __            _____ _  _    ___
>>>>  \ \/ /___ _ __   |___ /| || |  / _ \
>>>>   \  // _ \ ''_ \    |_ \| || |_| | | |
>>>>   /  \  __/ | | |  ___) |__   _| |_| |
>>>>  /_/\_\___|_| |_| |____(_) |_|(_)___/
>>>> 
>>>> (XEN) Xen version 3.4.0 (root@gitco.tld) (gcc version 4.1.2
20080704
>>>> (Red Hat 4.1.2-44)) Wed May 27 21:53:09 CEST 2009
>>>> (XEN) Latest ChangeSet: unavailable
>>>> (XEN) Command line: cpufreq=xen cpuidle dom0_max_vcpus=1
>>>> dom0_vcpus_pin=true dom0_mem=1024M apic_verbosity=verbose
loglvl=all
>>>> (XEN) Video information:
>>>> (XEN)  VGA is text mode 80x25, font 8x16
>>>> (XEN)  VBE/DDC methods: none; EDID transfer time: 2 seconds
>>>> (XEN)  EDID info not retrieved because no DDC retrieval method
detected
>>>> (XEN) Disc information:
>>>> (XEN)  Found 2 MBR signatures
>>>> (XEN)  Found 2 EDD information structures
>>>> (XEN) Xen-e820 RAM map:
>>>> (XEN)  0000000000000000 - 000000000009f400 (usable)
>>>> (XEN)  000000000009f400 - 0000000000100000 (reserved)
>>>> (XEN)  0000000000100000 - 000000009e2e1000 (usable)
>>>> (XEN)  000000009e2e1000 - 000000009e3a3000 (ACPI NVS)
>>>> (XEN)  000000009e3a3000 - 000000009fa32000 (usable)
>>>> (XEN)  000000009fa32000 - 000000009fa9a000 (reserved)
>>>> (XEN)  000000009fa9a000 - 000000009faac000 (usable)
>>>> (XEN)  000000009faac000 - 000000009fb1a000 (ACPI NVS)
>>>> (XEN)  000000009fb1a000 - 000000009fb26000 (usable)
>>>> (XEN)  000000009fb26000 - 000000009fb3a000 (ACPI data)
>>>> (XEN)  000000009fb3a000 - 000000009fc00000 (usable)
>>>> (XEN)  000000009fc00000 - 00000000b0000000 (reserved)
>>>> (XEN)  00000000ffc00000 - 00000000ffc0c000 (reserved)
>>>> (XEN)  0000000100000000 - 0000000260000000 (usable)
>>>> (XEN) System RAM: 8185MB (8382412kB)
>>>> (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
>>>> (XEN) ACPI: XSDT 9FB39120, 0084 (r1 INTEL  S5000PSL        0
INTL
>>>> 1000013)
>>>> (XEN) ACPI: FACP 9FB37000, 00F4 (r3 INTEL  S5000PSL        0
INTL
>>>> 1000013)
>>>> (XEN) ACPI: DSDT 9FB30000, 57F6 (r2 INTEL  S5000PSL        1
INTL
>>>> 1000013)
>>>> (XEN) ACPI: FACS 9FAAC000, 0040
>>>> (XEN) ACPI: APIC 9FB36000, 00C8 (r1 INTEL  S5000PSL        0
INTL
>>>> 1000013)
>>>> (XEN) ACPI: SPCR 9FB2F000, 0050 (r1 INTEL  S5000PSL        0
INTL
>>>> 1000013)
>>>> (XEN) ACPI: HPET 9FB2E000, 0038 (r1 INTEL  S5000PSL        1
INTL
>>>> 1000013)
>>>> (XEN) ACPI: MCFG 9FB2D000, 003C (r1 INTEL  S5000PSL        1
INTL
>>>> 1000013)
>>>> (XEN) ACPI: SSDT 9FB2C000, 0A14 (r2 INTEL  EIST         4000
INTL
>>>> 1000013)
>>>> (XEN) ACPI: SSDT 9FB2B000, 0193 (r2 INTEL  IPMI         4000
INTL
>>>> 1000013)
>>>> (XEN) ACPI: SSDT 9FB2A000, 00CE (r2 INTEL  CST          4000
INTL
>>>> 1000013)
>>>> (XEN) ACPI: HEST 9FB29000, 00A8 (r1 INTEL  S5000PSL        1
INTL
>>>> 1)
>>>> (XEN) ACPI: BERT 9FB28000, 0030 (r1 INTEL  S5000PSL        1
INTL
>>>> 1)
>>>> (XEN) ACPI: ERST 9FB27000, 0230 (r1 INTEL  S5000PSL        1
INTL
>>>> 1)
>>>> (XEN) ACPI: EINJ 9FB26000, 0130 (r1 INTEL  S5000PSL        1
INTL
>>>> 1)
>>>> (XEN) NUMA turned off
>>>> (XEN) Faking a node at 0000000000000000-0000000260000000
>>>> (XEN) Domain heap initialised
>>>> (XEN) found SMP MP-table at 000fd190
>>>> (XEN) DMI 2.5 present.
>>>> (XEN) Using APIC driver default
>>>> (XEN) ACPI: PM-Timer IO Port: 0x408
>>>> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
>>>> (XEN) ACPI:                  wakeup_vec[9faac00c], vec_size[20]
>>>> (XEN) ACPI: Local APIC address 0xfee00000
>>>> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>>>> (XEN) Processor #0 7:7 APIC version 20
>>>> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>>>> (XEN) Processor #2 7:7 APIC version 20
>>>> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>>>> (XEN) Processor #4 7:7 APIC version 20
>>>> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
>>>> (XEN) Processor #6 7:7 APIC version 20
>>>> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
>>>> (XEN) Processor #1 7:7 APIC version 20
>>>> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
>>>> (XEN) Processor #3 7:7 APIC version 20
>>>> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>>>> (XEN) Processor #5 7:7 APIC version 20
>>>> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>>>> (XEN) Processor #7 7:7 APIC version 20
>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
>>>> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>>>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
0-23
>>>> (XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>>>> (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI
24-47
>>>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
>>>> (XEN) ACPI: IRQ0 used by override.
>>>> (XEN) ACPI: IRQ2 used by override.
>>>> (XEN) ACPI: IRQ9 used by override.
>>>> (XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
>>>> (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
>>>> (XEN) Using ACPI (MADT) for SMP configuration information
>>>> (XEN) mapped APIC to ffff828bffffe000 (fee00000)
>>>> (XEN) mapped IOAPIC to ffff828bffffd000 (fec00000)
>>>> (XEN) mapped IOAPIC to ffff828bffffc000 (fec80000)
>>>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>>>> (XEN) Initializing CPU#0
>>>> (XEN) Detected 2327.591 MHz processor.
>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>> (XEN) CPU: L2 cache: 6144K
>>>> (XEN) CPU: Physical Processor ID: 0
>>>> (XEN) CPU: Processor Core ID: 0
>>>> (XEN) VMX: Supported advanced features:
>>>> (XEN)  - APIC MMIO access virtualisation
>>>> (XEN)  - APIC TPR shadow
>>>> (XEN)  - Virtual NMI
>>>> (XEN)  - MSR direct-access bitmap
>>>> (XEN) HVM: VMX enabled
>>>> (XEN) Intel machine check reporting enabled on CPU#0.
>>>> (XEN) CPU0: Thermal monitoring enabled (TM2)
>>>> (XEN) CMCI: CPU0 has no CMCI support
>>>> (XEN) CPU0: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>>> (XEN) enabled ExtINT on CPU#0
>>>> (XEN) Booting processor 1/2 eip 8c000
>>>> (XEN) Initializing CPU#1
>>>> (XEN) masked ExtINT on CPU#1
>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>> (XEN) CPU: L2 cache: 6144K
>>>> (XEN) CPU: Physical Processor ID: 0
>>>> (XEN) CPU: Processor Core ID: 2
>>>> (XEN) Intel machine check reporting enabled on CPU#1.
>>>> (XEN) CPU1: Thermal monitoring enabled (TM2)
>>>> (XEN) CMCI: CPU1 has no CMCI support
>>>> (XEN) CPU1: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>>> (XEN) Booting processor 2/4 eip 8c000
>>>> (XEN) Initializing CPU#2
>>>> (XEN) masked ExtINT on CPU#2
>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>> (XEN) CPU: L2 cache: 6144K
>>>> (XEN) CPU: Physical Processor ID: 1
>>>> (XEN) CPU: Processor Core ID: 0
>>>> (XEN) Intel machine check reporting enabled on CPU#2.
>>>> (XEN) CPU2: Thermal monitoring enabled (TM2)
>>>> (XEN) CMCI: CPU2 has no CMCI support
>>>> (XEN) CPU2: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>>> (XEN) Booting processor 3/6 eip 8c000
>>>> (XEN) Initializing CPU#3
>>>> (XEN) masked ExtINT on CPU#3
>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>> (XEN) CPU: L2 cache: 6144K
>>>> (XEN) CPU: Physical Processor ID: 1
>>>> (XEN) CPU: Processor Core ID: 2
>>>> (XEN) Intel machine check reporting enabled on CPU#3.
>>>> (XEN) CPU3: Thermal monitoring enabled (TM2)
>>>> (XEN) CMCI: CPU3 has no CMCI support
>>>> (XEN) CPU3: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>>> (XEN) Booting processor 4/1 eip 8c000
>>>> (XEN) Initializing CPU#4
>>>> (XEN) masked ExtINT on CPU#4
>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>> (XEN) CPU: L2 cache: 6144K
>>>> (XEN) CPU: Physical Processor ID: 0
>>>> (XEN) CPU: Processor Core ID: 1
>>>> (XEN) Intel machine check reporting enabled on CPU#4.
>>>> (XEN) CPU4: Thermal monitoring enabled (TM2)
>>>> (XEN) CMCI: CPU4 has no CMCI support
>>>> (XEN) CPU4: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>>> (XEN) Booting processor 5/3 eip 8c000
>>>> (XEN) Initializing CPU#5
>>>> (XEN) masked ExtINT on CPU#5
>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>> (XEN) CPU: L2 cache: 6144K
>>>> (XEN) CPU: Physical Processor ID: 0
>>>> (XEN) CPU: Processor Core ID: 3
>>>> (XEN) Intel machine check reporting enabled on CPU#5.
>>>> (XEN) CPU5: Thermal monitoring enabled (TM2)
>>>> (XEN) CMCI: CPU5 has no CMCI support
>>>> (XEN) CPU5: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>>> (XEN) Booting processor 6/5 eip 8c000
>>>> (XEN) Initializing CPU#6
>>>> (XEN) masked ExtINT on CPU#6
>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>> (XEN) CPU: L2 cache: 6144K
>>>> (XEN) CPU: Physical Processor ID: 1
>>>> (XEN) CPU: Processor Core ID: 1
>>>> (XEN) Intel machine check reporting enabled on CPU#6.
>>>> (XEN) CPU6: Thermal monitoring enabled (TM2)
>>>> (XEN) CMCI: CPU6 has no CMCI support
>>>> (XEN) CPU6: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>>> (XEN) Booting processor 7/7 eip 8c000
>>>> (XEN) Initializing CPU#7
>>>> (XEN) masked ExtINT on CPU#7
>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>> (XEN) CPU: L2 cache: 6144K
>>>> (XEN) CPU: Physical Processor ID: 1
>>>> (XEN) CPU: Processor Core ID: 3
>>>> (XEN) Intel machine check reporting enabled on CPU#7.
>>>> (XEN) CPU7: Thermal monitoring enabled (TM2)
>>>> (XEN) CMCI: CPU7 has no CMCI support
>>>> (XEN) CPU7: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
>>>> (XEN) Total of 8 processors activated.
>>>> (XEN) ENABLING IO-APIC IRQs
>>>> (XEN)  -> Using new ACK method
>>>> (XEN) init IO_APIC IRQs
>>>> (XEN)  IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20,
8-21,
>>>> 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9,
9-10,
>>>> 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17, 9-18, 9-19, 9-20,
9-21, 9-22,
>>>> 9-23 not connected.
>>>> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
>>>> (XEN) number of MP IRQ sources: 15.
>>>> (XEN) number of IO-APIC #8 registers: 24.
>>>> (XEN) number of IO-APIC #9 registers: 24.
>>>> (XEN) testing the IO APIC.......................
>>>> (XEN) IO APIC #8......
>>>> (XEN) .... register #00: 08000000
>>>> (XEN) .......    : physical APIC id: 08
>>>> (XEN) .......    : Delivery Type: 0
>>>> (XEN) .......    : LTS          : 0
>>>> (XEN) .... register #01: 00170020
>>>> (XEN) .......     : max redirection entries: 0017
>>>> (XEN) .......     : PRQ implemented: 0
>>>> (XEN) .......     : IO APIC version: 0020
>>>> (XEN) .... IRQ redirection table:
>>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
>>>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  01 001 01  0    0    0   0   0    1    1    20
>>>> (XEN)  02 001 01  0    0    0   0   0    1    1    F0
>>>> (XEN)  03 001 01  0    0    0   0   0    1    1    28
>>>> (XEN)  04 001 01  0    0    0   0   0    1    1    30
>>>> (XEN)  05 001 01  0    0    0   0   0    1    1    38
>>>> (XEN)  06 001 01  0    0    0   0   0    1    1    40
>>>> (XEN)  07 001 01  0    0    0   0   0    1    1    48
>>>> (XEN)  08 001 01  0    0    0   0   0    1    1    50
>>>> (XEN)  09 001 01  1    1    0   0   0    1    1    58
>>>> (XEN)  0a 001 01  0    0    0   0   0    1    1    60
>>>> (XEN)  0b 001 01  0    0    0   0   0    1    1    68
>>>> (XEN)  0c 001 01  0    0    0   0   0    1    1    70
>>>> (XEN)  0d 001 01  0    0    0   0   0    1    1    78
>>>> (XEN)  0e 001 01  0    0    0   0   0    1    1    88
>>>> (XEN)  0f 001 01  0    0    0   0   0    1    1    90
>>>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
>>>> (XEN) IO APIC #9......
>>>> (XEN) .... register #00: 09000000
>>>> (XEN) .......    : physical APIC id: 09
>>>> (XEN) .......    : Delivery Type: 0
>>>> (XEN) .......    : LTS          : 0
>>>> (XEN) .... register #01: 00178020
>>>> (XEN) .......     : max redirection entries: 0017
>>>> (XEN) .......     : PRQ implemented: 1
>>>> (XEN) .......     : IO APIC version: 0020
>>>> (XEN) .... register #02: 09000000
>>>> (XEN) .......     : arbitration: 09
>>>> (XEN) .... register #03: 00000001
>>>> (XEN) .......     : Boot DT    : 1
>>>> (XEN) .... IRQ redirection table:
>>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
>>>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  01 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  02 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  03 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  04 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  05 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  06 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  07 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  08 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  09 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  0a 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  0b 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  0c 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  0d 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  0e 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  0f 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
>>>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
>>>> (XEN) Using vector-based indexing
>>>> (XEN) IRQ to pin mappings:
>>>> (XEN) IRQ240 -> 0:2
>>>> (XEN) IRQ32 -> 0:1
>>>> (XEN) IRQ40 -> 0:3
>>>> (XEN) IRQ48 -> 0:4
>>>> (XEN) IRQ56 -> 0:5
>>>> (XEN) IRQ64 -> 0:6
>>>> (XEN) IRQ72 -> 0:7
>>>> (XEN) IRQ80 -> 0:8
>>>> (XEN) IRQ88 -> 0:9
>>>> (XEN) IRQ96 -> 0:10
>>>> (XEN) IRQ104 -> 0:11
>>>> (XEN) IRQ112 -> 0:12
>>>> (XEN) IRQ120 -> 0:13
>>>> (XEN) IRQ136 -> 0:14
>>>> (XEN) IRQ144 -> 0:15
>>>> (XEN) .................................... done.
>>>> (XEN) Using local APIC timer interrupts.
>>>> (XEN) calibrating APIC timer ...
>>>> (XEN) ..... CPU clock speed is 2327.5697 MHz.
>>>> (XEN) ..... host bus clock speed is 332.5098 MHz.
>>>> (XEN) ..... bus_scale = 0x00015489
>>>> (XEN) checking TSC synchronization across 8 CPUs: passed.
>>>> (XEN) Platform timer is 14.318MHz HPET
>>>> (XEN) Brought up 8 CPUs
>>>> (XEN) I/O virtualisation disabled
>>>> (XEN) HPET: 3 timers in total, 0 timers will be used for
broadcast
>>>> (XEN) ACPI sleep modes: S3
>>>> (XEN) mcheck_poll: Machine check polling timer started.
>>>> (XEN) *** LOADING DOMAIN 0 ***
>>>> (XEN)  Xen  kernel: 64-bit, lsb, compat32
>>>> (XEN)  Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 ->
>>>> 0xffffffff8074310c
>>>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>>> (XEN)  Dom0 alloc.:   0000000256000000->0000000258000000
(253952 pages
>>>> to be allocated)
>>>> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>>>> (XEN)  Loaded kernel: ffffffff80200000->ffffffff8074310c
>>>> (XEN)  Init. ramdisk: ffffffff80744000->ffffffff80f63a00
>>>> (XEN)  Phys-Mach map: ffffffff80f64000->ffffffff81164000
>>>> (XEN)  Start info:    ffffffff81164000->ffffffff811644b4
>>>> (XEN)  Page tables:   ffffffff81165000->ffffffff81172000
>>>> (XEN)  Boot stack:    ffffffff81172000->ffffffff81173000
>>>> (XEN)  TOTAL:         ffffffff80000000->ffffffff81400000
>>>> (XEN)  ENTRY ADDRESS: ffffffff80200000
>>>> (XEN) Dom0 has maximum 1 VCPUs
>>>> (XEN) Scrubbing Free
>>>> RAM:
>>>>
......................................................................do
>> ne.
>>>> (XEN) Xen trace buffers: disabled
>>>> (XEN) Std. Loglevel: All
>>>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and
warnings)
>>>> (XEN) Xen is relinquishing VGA console.
>>>> (XEN) *** Serial input -> DOM0 (type
''CTRL-a'' three times to switch
>>>> input to Xen)
>>>> (XEN) Freed 124kB init memory.
>>>> 
>>>> ===========================================>>>> 
>>>> [root@b52 ~]# xenpm get-cpuidle-states
>>>> Max C-state: C7
>>>> 
>>>> cpu id               : 0
>>>> total C-states       : 0
>>>> idle time(ms)        : 0
>>>> 
>>>> cpu id               : 1
>>>> total C-states       : 0
>>>> idle time(ms)        : 0
>>>> 
>>>> cpu id               : 2
>>>> total C-states       : 0
>>>> idle time(ms)        : 0
>>>> 
>>>> cpu id               : 3
>>>> total C-states       : 0
>>>> idle time(ms)        : 0
>>>> 
>>>> cpu id               : 4
>>>> total C-states       : 0
>>>> idle time(ms)        : 0
>>>> 
>>>> cpu id               : 5
>>>> total C-states       : 0
>>>> idle time(ms)        : 0
>>>> 
>>>> cpu id               : 6
>>>> total C-states       : 0
>>>> idle time(ms)        : 0
>>>> 
>>>> cpu id               : 7
>>>> total C-states       : 0
>>>> idle time(ms)        : 0
>>>> 
>>>> [root@b52 ~]# xenpm get-cpufreq-states
>>>> [root@b52 ~]# xenpm get-cpufreq-para
>>>> [CPU0] failed to get cpufreq parameter
>>>> [CPU1] failed to get cpufreq parameter
>>>> [CPU2] failed to get cpufreq parameter
>>>> [CPU3] failed to get cpufreq parameter
>>>> [CPU4] failed to get cpufreq parameter
>>>> [CPU5] failed to get cpufreq parameter
>>>> [CPU6] failed to get cpufreq parameter
>>>> [CPU7] failed to get cpufreq parameter
>>>> 
>>>> 
>>>> Thanks
>>>> 
>>>> Mike
>>> 
>>> 
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>> 
> 


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Mike Brady

2009-Jun-04 09:55 UTC

head link

RE: [Xen-devel] [Fwd: Problems with power management]

The BIOS has the following options, both of which are enabled:
- Intel Speed Step
- Deep C-State Support

As reported by /proc/cpuinfo the cpu speed does vary using a native
Linux kernel.

Sorry but I am not in a position to do my own build at the moment.  I
may be able to try it next week.

Thanks

Mike

On Thu, 2009-06-04 at 16:41 +0800, Wei, Gang wrote:> Hi, Mike,
> 
> Are there any BIOS options in your box related with C-states or P-states?
These may be disabled.
> 
> Or can you try the native Linux first to make sure you can see the PM
effect?
> 
> Further, if you can rebuild Xen yourself, please turn on the C/P state
debug flag ( e.g. uncomment/*#define DEBUG_PM_CX*/ in cpu_idle.c) , and repost
the serial log for more detail info.
> 
> Jimmy
> 
> >-----Original Message-----
> >From: Keir Fraser [mailto:keir.fraser@eu.citrix.com]
> >Sent: 2009年6月4日 15:47
> >To: mike.brady@devnull.net.nz; xen-devel
> >Cc: Wei, Gang
> >Subject: Re: [Xen-devel] [Fwd: Problems with power management]
> >
> >Your best bet tool here is ''hg -v history tools/misc/xenpm.c |
less'' and
> >pick one of the developers of the component. In this case Wei Gang
would be
> >plausible (cc''ed).
> >
> > -- Keir
> >
> >On 04/06/2009 06:40, "Mike Brady"
<mike.brady@devnull.net.nz> wrote:
> >
> >> I posted this on the user list but it has been suggested to me
that it
> >> may pay to ask on the devel list as well as I didn''t get
any responses.
> >>
> >> Thanks
> >>
> >> Mike
> >>
> >> -------- Forwarded Message --------
> >>> From: Mike Brady <mike.brady@devnull.net.nz>
> >>> Reply-To: mike.brady@devnull.net.nz
> >>> To: xen-users@lists.xensource.com
<xen-users@lists.xensource.com>
> >>> Subject: Problems with power management
> >>> Date: Sat, 30 May 2009 16:28:11 +1200
> >>>
> >>> I do not seem to be able to get any where with the power
management
> >>> functions. I have had a look at the xenpm Wiki page, but it
hasn''t
> >>> helped.  Its probably something completely obvious, but I
can''t see it.
> >>>
> >>> I running Xen 3.4.0 on Centos 5.3 x86_64 using the gitco RPMs
on an
> >>> Intel S5000PSL motherboard with 2 x Xeon 5410s.  Dom0 is
running the
> >>> latest Centos 5.3 kernel.
> >>>
> >>> My xm dmesg output is below followed by the output that I get
from the
> >>> xenpm get* commands, which isn''t much.
> >>>
> >>> ===========================================> >>>
[root@b52 ~]# xm dmesg
> >>>  __  __            _____ _  _    ___
> >>>  \ \/ /___ _ __   |___ /| || |  / _ \
> >>>   \  // _ \ ''_ \    |_ \| || |_| | | |
> >>>   /  \  __/ | | |  ___) |__   _| |_| |
> >>>  /_/\_\___|_| |_| |____(_) |_|(_)___/
> >>>
> >>> (XEN) Xen version 3.4.0 (root@gitco.tld) (gcc version 4.1.2
20080704
> >>> (Red Hat 4.1.2-44)) Wed May 27 21:53:09 CEST 2009
> >>> (XEN) Latest ChangeSet: unavailable
> >>> (XEN) Command line: cpufreq=xen cpuidle dom0_max_vcpus=1
> >>> dom0_vcpus_pin=true dom0_mem=1024M apic_verbosity=verbose
loglvl=all
> >>> (XEN) Video information:
> >>> (XEN)  VGA is text mode 80x25, font 8x16
> >>> (XEN)  VBE/DDC methods: none; EDID transfer time: 2 seconds
> >>> (XEN)  EDID info not retrieved because no DDC retrieval method
detected
> >>> (XEN) Disc information:
> >>> (XEN)  Found 2 MBR signatures
> >>> (XEN)  Found 2 EDD information structures
> >>> (XEN) Xen-e820 RAM map:
> >>> (XEN)  0000000000000000 - 000000000009f400 (usable)
> >>> (XEN)  000000000009f400 - 0000000000100000 (reserved)
> >>> (XEN)  0000000000100000 - 000000009e2e1000 (usable)
> >>> (XEN)  000000009e2e1000 - 000000009e3a3000 (ACPI NVS)
> >>> (XEN)  000000009e3a3000 - 000000009fa32000 (usable)
> >>> (XEN)  000000009fa32000 - 000000009fa9a000 (reserved)
> >>> (XEN)  000000009fa9a000 - 000000009faac000 (usable)
> >>> (XEN)  000000009faac000 - 000000009fb1a000 (ACPI NVS)
> >>> (XEN)  000000009fb1a000 - 000000009fb26000 (usable)
> >>> (XEN)  000000009fb26000 - 000000009fb3a000 (ACPI data)
> >>> (XEN)  000000009fb3a000 - 000000009fc00000 (usable)
> >>> (XEN)  000000009fc00000 - 00000000b0000000 (reserved)
> >>> (XEN)  00000000ffc00000 - 00000000ffc0c000 (reserved)
> >>> (XEN)  0000000100000000 - 0000000260000000 (usable)
> >>> (XEN) System RAM: 8185MB (8382412kB)
> >>> (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
> >>> (XEN) ACPI: XSDT 9FB39120, 0084 (r1 INTEL  S5000PSL        0
INTL
> >>> 1000013)
> >>> (XEN) ACPI: FACP 9FB37000, 00F4 (r3 INTEL  S5000PSL        0
INTL
> >>> 1000013)
> >>> (XEN) ACPI: DSDT 9FB30000, 57F6 (r2 INTEL  S5000PSL        1
INTL
> >>> 1000013)
> >>> (XEN) ACPI: FACS 9FAAC000, 0040
> >>> (XEN) ACPI: APIC 9FB36000, 00C8 (r1 INTEL  S5000PSL        0
INTL
> >>> 1000013)
> >>> (XEN) ACPI: SPCR 9FB2F000, 0050 (r1 INTEL  S5000PSL        0
INTL
> >>> 1000013)
> >>> (XEN) ACPI: HPET 9FB2E000, 0038 (r1 INTEL  S5000PSL        1
INTL
> >>> 1000013)
> >>> (XEN) ACPI: MCFG 9FB2D000, 003C (r1 INTEL  S5000PSL        1
INTL
> >>> 1000013)
> >>> (XEN) ACPI: SSDT 9FB2C000, 0A14 (r2 INTEL  EIST         4000
INTL
> >>> 1000013)
> >>> (XEN) ACPI: SSDT 9FB2B000, 0193 (r2 INTEL  IPMI         4000
INTL
> >>> 1000013)
> >>> (XEN) ACPI: SSDT 9FB2A000, 00CE (r2 INTEL  CST          4000
INTL
> >>> 1000013)
> >>> (XEN) ACPI: HEST 9FB29000, 00A8 (r1 INTEL  S5000PSL        1
INTL
> >>> 1)
> >>> (XEN) ACPI: BERT 9FB28000, 0030 (r1 INTEL  S5000PSL        1
INTL
> >>> 1)
> >>> (XEN) ACPI: ERST 9FB27000, 0230 (r1 INTEL  S5000PSL        1
INTL
> >>> 1)
> >>> (XEN) ACPI: EINJ 9FB26000, 0130 (r1 INTEL  S5000PSL        1
INTL
> >>> 1)
> >>> (XEN) NUMA turned off
> >>> (XEN) Faking a node at 0000000000000000-0000000260000000
> >>> (XEN) Domain heap initialised
> >>> (XEN) found SMP MP-table at 000fd190
> >>> (XEN) DMI 2.5 present.
> >>> (XEN) Using APIC driver default
> >>> (XEN) ACPI: PM-Timer IO Port: 0x408
> >>> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
> >>> (XEN) ACPI:                  wakeup_vec[9faac00c],
vec_size[20]
> >>> (XEN) ACPI: Local APIC address 0xfee00000
> >>> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> >>> (XEN) Processor #0 7:7 APIC version 20
> >>> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
> >>> (XEN) Processor #2 7:7 APIC version 20
> >>> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
> >>> (XEN) Processor #4 7:7 APIC version 20
> >>> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
> >>> (XEN) Processor #6 7:7 APIC version 20
> >>> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
> >>> (XEN) Processor #1 7:7 APIC version 20
> >>> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
> >>> (XEN) Processor #3 7:7 APIC version 20
> >>> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
> >>> (XEN) Processor #5 7:7 APIC version 20
> >>> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
> >>> (XEN) Processor #7 7:7 APIC version 20
> >>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
> >>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
> >>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
> >>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
> >>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
> >>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
> >>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
> >>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
> >>> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> >>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000,
GSI 0-23
> >>> (XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
> >>> (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000,
GSI 24-47
> >>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> >>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
> >>> (XEN) ACPI: IRQ0 used by override.
> >>> (XEN) ACPI: IRQ2 used by override.
> >>> (XEN) ACPI: IRQ9 used by override.
> >>> (XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
> >>> (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
> >>> (XEN) Using ACPI (MADT) for SMP configuration information
> >>> (XEN) mapped APIC to ffff828bffffe000 (fee00000)
> >>> (XEN) mapped IOAPIC to ffff828bffffd000 (fec00000)
> >>> (XEN) mapped IOAPIC to ffff828bffffc000 (fec80000)
> >>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> >>> (XEN) Initializing CPU#0
> >>> (XEN) Detected 2327.591 MHz processor.
> >>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>> (XEN) CPU: L2 cache: 6144K
> >>> (XEN) CPU: Physical Processor ID: 0
> >>> (XEN) CPU: Processor Core ID: 0
> >>> (XEN) VMX: Supported advanced features:
> >>> (XEN)  - APIC MMIO access virtualisation
> >>> (XEN)  - APIC TPR shadow
> >>> (XEN)  - Virtual NMI
> >>> (XEN)  - MSR direct-access bitmap
> >>> (XEN) HVM: VMX enabled
> >>> (XEN) Intel machine check reporting enabled on CPU#0.
> >>> (XEN) CPU0: Thermal monitoring enabled (TM2)
> >>> (XEN) CMCI: CPU0 has no CMCI support
> >>> (XEN) CPU0: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
> >>> (XEN) enabled ExtINT on CPU#0
> >>> (XEN) Booting processor 1/2 eip 8c000
> >>> (XEN) Initializing CPU#1
> >>> (XEN) masked ExtINT on CPU#1
> >>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>> (XEN) CPU: L2 cache: 6144K
> >>> (XEN) CPU: Physical Processor ID: 0
> >>> (XEN) CPU: Processor Core ID: 2
> >>> (XEN) Intel machine check reporting enabled on CPU#1.
> >>> (XEN) CPU1: Thermal monitoring enabled (TM2)
> >>> (XEN) CMCI: CPU1 has no CMCI support
> >>> (XEN) CPU1: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
> >>> (XEN) Booting processor 2/4 eip 8c000
> >>> (XEN) Initializing CPU#2
> >>> (XEN) masked ExtINT on CPU#2
> >>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>> (XEN) CPU: L2 cache: 6144K
> >>> (XEN) CPU: Physical Processor ID: 1
> >>> (XEN) CPU: Processor Core ID: 0
> >>> (XEN) Intel machine check reporting enabled on CPU#2.
> >>> (XEN) CPU2: Thermal monitoring enabled (TM2)
> >>> (XEN) CMCI: CPU2 has no CMCI support
> >>> (XEN) CPU2: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
> >>> (XEN) Booting processor 3/6 eip 8c000
> >>> (XEN) Initializing CPU#3
> >>> (XEN) masked ExtINT on CPU#3
> >>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>> (XEN) CPU: L2 cache: 6144K
> >>> (XEN) CPU: Physical Processor ID: 1
> >>> (XEN) CPU: Processor Core ID: 2
> >>> (XEN) Intel machine check reporting enabled on CPU#3.
> >>> (XEN) CPU3: Thermal monitoring enabled (TM2)
> >>> (XEN) CMCI: CPU3 has no CMCI support
> >>> (XEN) CPU3: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
> >>> (XEN) Booting processor 4/1 eip 8c000
> >>> (XEN) Initializing CPU#4
> >>> (XEN) masked ExtINT on CPU#4
> >>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>> (XEN) CPU: L2 cache: 6144K
> >>> (XEN) CPU: Physical Processor ID: 0
> >>> (XEN) CPU: Processor Core ID: 1
> >>> (XEN) Intel machine check reporting enabled on CPU#4.
> >>> (XEN) CPU4: Thermal monitoring enabled (TM2)
> >>> (XEN) CMCI: CPU4 has no CMCI support
> >>> (XEN) CPU4: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
> >>> (XEN) Booting processor 5/3 eip 8c000
> >>> (XEN) Initializing CPU#5
> >>> (XEN) masked ExtINT on CPU#5
> >>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>> (XEN) CPU: L2 cache: 6144K
> >>> (XEN) CPU: Physical Processor ID: 0
> >>> (XEN) CPU: Processor Core ID: 3
> >>> (XEN) Intel machine check reporting enabled on CPU#5.
> >>> (XEN) CPU5: Thermal monitoring enabled (TM2)
> >>> (XEN) CMCI: CPU5 has no CMCI support
> >>> (XEN) CPU5: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
> >>> (XEN) Booting processor 6/5 eip 8c000
> >>> (XEN) Initializing CPU#6
> >>> (XEN) masked ExtINT on CPU#6
> >>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>> (XEN) CPU: L2 cache: 6144K
> >>> (XEN) CPU: Physical Processor ID: 1
> >>> (XEN) CPU: Processor Core ID: 1
> >>> (XEN) Intel machine check reporting enabled on CPU#6.
> >>> (XEN) CPU6: Thermal monitoring enabled (TM2)
> >>> (XEN) CMCI: CPU6 has no CMCI support
> >>> (XEN) CPU6: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
> >>> (XEN) Booting processor 7/7 eip 8c000
> >>> (XEN) Initializing CPU#7
> >>> (XEN) masked ExtINT on CPU#7
> >>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>> (XEN) CPU: L2 cache: 6144K
> >>> (XEN) CPU: Physical Processor ID: 1
> >>> (XEN) CPU: Processor Core ID: 3
> >>> (XEN) Intel machine check reporting enabled on CPU#7.
> >>> (XEN) CPU7: Thermal monitoring enabled (TM2)
> >>> (XEN) CMCI: CPU7 has no CMCI support
> >>> (XEN) CPU7: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
stepping 06
> >>> (XEN) Total of 8 processors activated.
> >>> (XEN) ENABLING IO-APIC IRQs
> >>> (XEN)  -> Using new ACK method
> >>> (XEN) init IO_APIC IRQs
> >>> (XEN)  IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20,
8-21,
> >>> 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9,
9-10,
> >>> 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17, 9-18, 9-19, 9-20,
9-21, 9-22,
> >>> 9-23 not connected.
> >>> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
> >>> (XEN) number of MP IRQ sources: 15.
> >>> (XEN) number of IO-APIC #8 registers: 24.
> >>> (XEN) number of IO-APIC #9 registers: 24.
> >>> (XEN) testing the IO APIC.......................
> >>> (XEN) IO APIC #8......
> >>> (XEN) .... register #00: 08000000
> >>> (XEN) .......    : physical APIC id: 08
> >>> (XEN) .......    : Delivery Type: 0
> >>> (XEN) .......    : LTS          : 0
> >>> (XEN) .... register #01: 00170020
> >>> (XEN) .......     : max redirection entries: 0017
> >>> (XEN) .......     : PRQ implemented: 0
> >>> (XEN) .......     : IO APIC version: 0020
> >>> (XEN) .... IRQ redirection table:
> >>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> >>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  01 001 01  0    0    0   0   0    1    1    20
> >>> (XEN)  02 001 01  0    0    0   0   0    1    1    F0
> >>> (XEN)  03 001 01  0    0    0   0   0    1    1    28
> >>> (XEN)  04 001 01  0    0    0   0   0    1    1    30
> >>> (XEN)  05 001 01  0    0    0   0   0    1    1    38
> >>> (XEN)  06 001 01  0    0    0   0   0    1    1    40
> >>> (XEN)  07 001 01  0    0    0   0   0    1    1    48
> >>> (XEN)  08 001 01  0    0    0   0   0    1    1    50
> >>> (XEN)  09 001 01  1    1    0   0   0    1    1    58
> >>> (XEN)  0a 001 01  0    0    0   0   0    1    1    60
> >>> (XEN)  0b 001 01  0    0    0   0   0    1    1    68
> >>> (XEN)  0c 001 01  0    0    0   0   0    1    1    70
> >>> (XEN)  0d 001 01  0    0    0   0   0    1    1    78
> >>> (XEN)  0e 001 01  0    0    0   0   0    1    1    88
> >>> (XEN)  0f 001 01  0    0    0   0   0    1    1    90
> >>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
> >>> (XEN) IO APIC #9......
> >>> (XEN) .... register #00: 09000000
> >>> (XEN) .......    : physical APIC id: 09
> >>> (XEN) .......    : Delivery Type: 0
> >>> (XEN) .......    : LTS          : 0
> >>> (XEN) .... register #01: 00178020
> >>> (XEN) .......     : max redirection entries: 0017
> >>> (XEN) .......     : PRQ implemented: 1
> >>> (XEN) .......     : IO APIC version: 0020
> >>> (XEN) .... register #02: 09000000
> >>> (XEN) .......     : arbitration: 09
> >>> (XEN) .... register #03: 00000001
> >>> (XEN) .......     : Boot DT    : 1
> >>> (XEN) .... IRQ redirection table:
> >>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> >>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  01 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  02 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  03 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  04 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  05 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  06 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  07 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  08 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  09 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  0a 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  0b 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  0c 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  0d 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  0e 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  0f 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
> >>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
> >>> (XEN) Using vector-based indexing
> >>> (XEN) IRQ to pin mappings:
> >>> (XEN) IRQ240 -> 0:2
> >>> (XEN) IRQ32 -> 0:1
> >>> (XEN) IRQ40 -> 0:3
> >>> (XEN) IRQ48 -> 0:4
> >>> (XEN) IRQ56 -> 0:5
> >>> (XEN) IRQ64 -> 0:6
> >>> (XEN) IRQ72 -> 0:7
> >>> (XEN) IRQ80 -> 0:8
> >>> (XEN) IRQ88 -> 0:9
> >>> (XEN) IRQ96 -> 0:10
> >>> (XEN) IRQ104 -> 0:11
> >>> (XEN) IRQ112 -> 0:12
> >>> (XEN) IRQ120 -> 0:13
> >>> (XEN) IRQ136 -> 0:14
> >>> (XEN) IRQ144 -> 0:15
> >>> (XEN) .................................... done.
> >>> (XEN) Using local APIC timer interrupts.
> >>> (XEN) calibrating APIC timer ...
> >>> (XEN) ..... CPU clock speed is 2327.5697 MHz.
> >>> (XEN) ..... host bus clock speed is 332.5098 MHz.
> >>> (XEN) ..... bus_scale = 0x00015489
> >>> (XEN) checking TSC synchronization across 8 CPUs: passed.
> >>> (XEN) Platform timer is 14.318MHz HPET
> >>> (XEN) Brought up 8 CPUs
> >>> (XEN) I/O virtualisation disabled
> >>> (XEN) HPET: 3 timers in total, 0 timers will be used for
broadcast
> >>> (XEN) ACPI sleep modes: S3
> >>> (XEN) mcheck_poll: Machine check polling timer started.
> >>> (XEN) *** LOADING DOMAIN 0 ***
> >>> (XEN)  Xen  kernel: 64-bit, lsb, compat32
> >>> (XEN)  Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000
->
> >>> 0xffffffff8074310c
> >>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> >>> (XEN)  Dom0 alloc.:   0000000256000000->0000000258000000
(253952 pages
> >>> to be allocated)
> >>> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> >>> (XEN)  Loaded kernel: ffffffff80200000->ffffffff8074310c
> >>> (XEN)  Init. ramdisk: ffffffff80744000->ffffffff80f63a00
> >>> (XEN)  Phys-Mach map: ffffffff80f64000->ffffffff81164000
> >>> (XEN)  Start info:    ffffffff81164000->ffffffff811644b4
> >>> (XEN)  Page tables:   ffffffff81165000->ffffffff81172000
> >>> (XEN)  Boot stack:    ffffffff81172000->ffffffff81173000
> >>> (XEN)  TOTAL:         ffffffff80000000->ffffffff81400000
> >>> (XEN)  ENTRY ADDRESS: ffffffff80200000
> >>> (XEN) Dom0 has maximum 1 VCPUs
> >>> (XEN) Scrubbing Free
> >>> RAM:
> >>>
......................................................................do
> >ne.
> >>> (XEN) Xen trace buffers: disabled
> >>> (XEN) Std. Loglevel: All
> >>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and
warnings)
> >>> (XEN) Xen is relinquishing VGA console.
> >>> (XEN) *** Serial input -> DOM0 (type
''CTRL-a'' three times to switch
> >>> input to Xen)
> >>> (XEN) Freed 124kB init memory.
> >>>
> >>> ===========================================> >>>
> >>> [root@b52 ~]# xenpm get-cpuidle-states
> >>> Max C-state: C7
> >>>
> >>> cpu id               : 0
> >>> total C-states       : 0
> >>> idle time(ms)        : 0
> >>>
> >>> cpu id               : 1
> >>> total C-states       : 0
> >>> idle time(ms)        : 0
> >>>
> >>> cpu id               : 2
> >>> total C-states       : 0
> >>> idle time(ms)        : 0
> >>>
> >>> cpu id               : 3
> >>> total C-states       : 0
> >>> idle time(ms)        : 0
> >>>
> >>> cpu id               : 4
> >>> total C-states       : 0
> >>> idle time(ms)        : 0
> >>>
> >>> cpu id               : 5
> >>> total C-states       : 0
> >>> idle time(ms)        : 0
> >>>
> >>> cpu id               : 6
> >>> total C-states       : 0
> >>> idle time(ms)        : 0
> >>>
> >>> cpu id               : 7
> >>> total C-states       : 0
> >>> idle time(ms)        : 0
> >>>
> >>> [root@b52 ~]# xenpm get-cpufreq-states
> >>> [root@b52 ~]# xenpm get-cpufreq-para
> >>> [CPU0] failed to get cpufreq parameter
> >>> [CPU1] failed to get cpufreq parameter
> >>> [CPU2] failed to get cpufreq parameter
> >>> [CPU3] failed to get cpufreq parameter
> >>> [CPU4] failed to get cpufreq parameter
> >>> [CPU5] failed to get cpufreq parameter
> >>> [CPU6] failed to get cpufreq parameter
> >>> [CPU7] failed to get cpufreq parameter
> >>>
> >>>
> >>> Thanks
> >>>
> >>> Mike
> >>
> >>
> >> _______________________________________________
> >> Xen-devel mailing list
> >> Xen-devel@lists.xensource.com
> >> http://lists.xensource.com/xen-devel
> >
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Wei, Gang

2009-Jun-04 10:05 UTC

head link

RE: [Xen-devel] [Fwd: Problems with power management]

Can you try with removing "dom0_max_vcpus=1" from the grub line? I
suspect this is a dom0 kernel issue. The upstream 2.6.18 xen-linux kernel works
well as dom0 kernel with PM. I am not sure about Centos 5.3 kernel.

Jimmy

Mike Brady wrote:> The BIOS has the following options, both of which are enabled:
> - Intel Speed Step
> - Deep C-State Support
>
> As reported by /proc/cpuinfo the cpu speed does vary using a native
> Linux kernel.
>
> Sorry but I am not in a position to do my own build at the moment.  I
> may be able to try it next week.
>
> Thanks
>
> Mike
>
> On Thu, 2009-06-04 at 16:41 +0800, Wei, Gang wrote:
>> Hi, Mike,
>>
>> Are there any BIOS options in your box related with C-states
> or P-states? These may be disabled.
>>
>> Or can you try the native Linux first to make sure you can see the
>> PM effect?
>>
>> Further, if you can rebuild Xen yourself, please turn on the
> C/P state debug flag ( e.g. uncomment/*#define DEBUG_PM_CX*/
> in cpu_idle.c) , and repost the serial log for more detail info.
>>
>> Jimmy
>>
>>> -----Original Message-----
>>> From: Keir Fraser [mailto:keir.fraser@eu.citrix.com]
>>> Sent: 2009年6月4日 15:47
>>> To: mike.brady@devnull.net.nz; xen-devel
>>> Cc: Wei, Gang
>>> Subject: Re: [Xen-devel] [Fwd: Problems with power management]
>>>
>>> Your best bet tool here is 'hg -v history tools/misc/xenpm.c |
>>> less' and pick one of the developers of the component. In this
case
>>> Wei Gang would be plausible (cc'ed).
>>>
>>> -- Keir
>>>
>>> On 04/06/2009 06:40, "Mike Brady"
<mike.brady@devnull.net.nz> wrote:
>>>
>>>> I posted this on the user list but it has been suggested to me
>>>> that it may pay to ask on the devel list as well as I
didn't get
>>>> any responses.
>>>>
>>>> Thanks
>>>>
>>>> Mike
>>>>
>>>> -------- Forwarded Message --------
>>>>> From: Mike Brady <mike.brady@devnull.net.nz>
>>>>> Reply-To: mike.brady@devnull.net.nz
>>>>> To: xen-users@lists.xensource.com
<xen-users@lists.xensource.com>
>>>>> Subject: Problems with power management
>>>>> Date: Sat, 30 May 2009 16:28:11 +1200
>>>>>
>>>>> I do not seem to be able to get any where with the power
>>>>> management functions. I have had a look at the xenpm Wiki
page,
>>>>> but it hasn't helped.  Its probably something
completely obvious,
>>>>> but I can't see it.
>>>>>
>>>>> I running Xen 3.4.0 on Centos 5.3 x86_64 using the gitco
RPMs on
>>>>> an Intel S5000PSL motherboard with 2 x Xeon 5410s.  Dom0 is
>>>>> running the latest Centos 5.3 kernel.
>>>>>
>>>>> My xm dmesg output is below followed by the output that I
get
>>>>> from the xenpm get* commands, which isn't much.
>>>>>
>>>>>
===========================================>>>>> [root@b52 ~]# xm
dmesg
>>>>>  __  __            _____ _  _    ___
>>>>>  \ \/ /___ _ __   |___ /| || |  / _ \
>>>>>   \  // _ \ '_ \    |_ \| || |_| | | |
>>>>>   /  \  __/ | | |  ___) |__   _| |_| |
>>>>>  /_/\_\___|_| |_| |____(_) |_|(_)___/
>>>>>
>>>>> (XEN) Xen version 3.4.0 (root@gitco.tld) (gcc version 4.1.2
>>>>> 20080704 (Red Hat 4.1.2-44)) Wed May 27 21:53:09 CEST 2009
>>>>> (XEN) Latest ChangeSet: unavailable
>>>>> (XEN) Command line: cpufreq=xen cpuidle dom0_max_vcpus=1
>>>>> dom0_vcpus_pin=true dom0_mem=1024M
> apic_verbosity=verbose loglvl=all
>>>>> (XEN) Video information:
>>>>> (XEN)  VGA is text mode 80x25, font 8x16
>>>>> (XEN)  VBE/DDC methods: none; EDID transfer time: 2 seconds
>>>>> (XEN)  EDID info not retrieved because no DDC retrieval
method
>>>>> detected (XEN) Disc information: (XEN)  Found 2 MBR
signatures
>>>>> (XEN)  Found 2 EDD information structures
>>>>> (XEN) Xen-e820 RAM map:
>>>>> (XEN)  0000000000000000 - 000000000009f400 (usable)
>>>>> (XEN)  000000000009f400 - 0000000000100000 (reserved)
>>>>> (XEN)  0000000000100000 - 000000009e2e1000 (usable)
>>>>> (XEN)  000000009e2e1000 - 000000009e3a3000 (ACPI NVS)
>>>>> (XEN)  000000009e3a3000 - 000000009fa32000 (usable)
>>>>> (XEN)  000000009fa32000 - 000000009fa9a000 (reserved)
>>>>> (XEN)  000000009fa9a000 - 000000009faac000 (usable)
>>>>> (XEN)  000000009faac000 - 000000009fb1a000 (ACPI NVS)
>>>>> (XEN)  000000009fb1a000 - 000000009fb26000 (usable)
>>>>> (XEN)  000000009fb26000 - 000000009fb3a000 (ACPI data)
>>>>> (XEN)  000000009fb3a000 - 000000009fc00000 (usable)
>>>>> (XEN)  000000009fc00000 - 00000000b0000000 (reserved)
>>>>> (XEN)  00000000ffc00000 - 00000000ffc0c000 (reserved)
>>>>> (XEN)  0000000100000000 - 0000000260000000 (usable)
>>>>> (XEN) System RAM: 8185MB (8382412kB)
>>>>> (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
>>>>> (XEN) ACPI: XSDT 9FB39120, 0084 (r1 INTEL  S5000PSL       
0 INTL
>>>>> 1000013) (XEN) ACPI: FACP 9FB37000, 00F4 (r3 INTEL 
S5000PSL
>>>>> 0 INTL 1000013) (XEN) ACPI: DSDT 9FB30000, 57F6 (r2 INTEL
>>>>> S5000PSL        1 INTL 1000013) (XEN) ACPI: FACS 9FAAC000,
0040
>>>>> (XEN) ACPI: APIC 9FB36000, 00C8 (r1 INTEL  S5000PSL       
0 INTL
>>>>> 1000013) (XEN) ACPI: SPCR 9FB2F000, 0050 (r1 INTEL 
S5000PSL
>>>>> 0 INTL 1000013) (XEN) ACPI: HPET 9FB2E000, 0038 (r1 INTEL
>>>>> S5000PSL        1 INTL 1000013) (XEN) ACPI: MCFG 9FB2D000,
003C
>>>>> (r1 INTEL  S5000PSL        1 INTL 1000013) (XEN) ACPI: SSDT
>>>>> 9FB2C000, 0A14 (r2 INTEL  EIST         4000 INTL 1000013)
(XEN)
>>>>> ACPI: SSDT 9FB2B000, 0193 (r2 INTEL  IPMI         4000 INTL
>>>>> 1000013) (XEN) ACPI: SSDT 9FB2A000, 00CE (r2 INTEL  CST
>>>>> 4000 INTL 1000013) (XEN) ACPI: HEST 9FB29000, 00A8 (r1
INTEL
>>>>> S5000PSL        1 INTL 1) (XEN) ACPI: BERT 9FB28000, 0030
(r1
>>>>> INTEL  S5000PSL        1 INTL 1) (XEN) ACPI: ERST 9FB27000,
0230
>>>>> (r1 INTEL  S5000PSL        1 INTL 1) (XEN) ACPI: EINJ
9FB26000,
>>>>> 0130 (r1 INTEL  S5000PSL        1 INTL 1) (XEN) NUMA turned
off
>>>>> (XEN) Faking a node at 0000000000000000-0000000260000000
(XEN)
>>>>> Domain heap initialised (XEN) found SMP MP-table at
000fd190
>>>>> (XEN) DMI 2.5 present. (XEN) Using APIC driver default
>>>>> (XEN) ACPI: PM-Timer IO Port: 0x408
>>>>> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0],
pm1x_evt[400,0]
>>>>> (XEN) ACPI:                  wakeup_vec[9faac00c],
vec_size[20]
>>>>> (XEN) ACPI: Local APIC address 0xfee00000
>>>>> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>>>>> (XEN) Processor #0 7:7 APIC version 20
>>>>> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>>>>> (XEN) Processor #2 7:7 APIC version 20
>>>>> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>>>>> (XEN) Processor #4 7:7 APIC version 20
>>>>> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
>>>>> (XEN) Processor #6 7:7 APIC version 20
>>>>> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
>>>>> (XEN) Processor #1 7:7 APIC version 20
>>>>> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
>>>>> (XEN) Processor #3 7:7 APIC version 20
>>>>> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>>>>> (XEN) Processor #5 7:7 APIC version 20
>>>>> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>>>>> (XEN) Processor #7 7:7 APIC version 20
>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
>>>>> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000]
gsi_base[0])
>>>>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000,
GSI
>>>>> 0-23 (XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000]
>>>>> gsi_base[24]) (XEN) IOAPIC[1]: apic_id 9, version 32,
address
>>>>> 0xfec80000, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0
bus_irq 0
>>>>> global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0
bus_irq 9
>>>>> global_irq 9 high level) (XEN) ACPI: IRQ0 used by override.
>>>>> (XEN) ACPI: IRQ2 used by override.
>>>>> (XEN) ACPI: IRQ9 used by override.
>>>>> (XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
>>>>> (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
>>>>> (XEN) Using ACPI (MADT) for SMP configuration information
>>>>> (XEN) mapped APIC to ffff828bffffe000 (fee00000)
>>>>> (XEN) mapped IOAPIC to ffff828bffffd000 (fec00000)
>>>>> (XEN) mapped IOAPIC to ffff828bffffc000 (fec80000)
>>>>> (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN)
>>>>> Initializing CPU#0 (XEN) Detected 2327.591 MHz processor.
>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>> (XEN) CPU: L2 cache: 6144K
>>>>> (XEN) CPU: Physical Processor ID: 0
>>>>> (XEN) CPU: Processor Core ID: 0
>>>>> (XEN) VMX: Supported advanced features:
>>>>> (XEN)  - APIC MMIO access virtualisation
>>>>> (XEN)  - APIC TPR shadow
>>>>> (XEN)  - Virtual NMI
>>>>> (XEN)  - MSR direct-access bitmap
>>>>> (XEN) HVM: VMX enabled
>>>>> (XEN) Intel machine check reporting enabled on CPU#0.
>>>>> (XEN) CPU0: Thermal monitoring enabled (TM2)
>>>>> (XEN) CMCI: CPU0 has no CMCI support
>>>>> (XEN) CPU0: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
>>>>> stepping 06 (XEN) enabled ExtINT on CPU#0 (XEN) Booting
processor
>>>>> 1/2 eip 8c000 (XEN) Initializing CPU#1
>>>>> (XEN) masked ExtINT on CPU#1
>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>> (XEN) CPU: L2 cache: 6144K
>>>>> (XEN) CPU: Physical Processor ID: 0
>>>>> (XEN) CPU: Processor Core ID: 2
>>>>> (XEN) Intel machine check reporting enabled on CPU#1.
>>>>> (XEN) CPU1: Thermal monitoring enabled (TM2)
>>>>> (XEN) CMCI: CPU1 has no CMCI support
>>>>> (XEN) CPU1: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
>>>>> stepping 06 (XEN) Booting processor 2/4 eip 8c000
>>>>> (XEN) Initializing CPU#2
>>>>> (XEN) masked ExtINT on CPU#2
>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>> (XEN) CPU: L2 cache: 6144K
>>>>> (XEN) CPU: Physical Processor ID: 1
>>>>> (XEN) CPU: Processor Core ID: 0
>>>>> (XEN) Intel machine check reporting enabled on CPU#2.
>>>>> (XEN) CPU2: Thermal monitoring enabled (TM2)
>>>>> (XEN) CMCI: CPU2 has no CMCI support
>>>>> (XEN) CPU2: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
>>>>> stepping 06 (XEN) Booting processor 3/6 eip 8c000
>>>>> (XEN) Initializing CPU#3
>>>>> (XEN) masked ExtINT on CPU#3
>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>> (XEN) CPU: L2 cache: 6144K
>>>>> (XEN) CPU: Physical Processor ID: 1
>>>>> (XEN) CPU: Processor Core ID: 2
>>>>> (XEN) Intel machine check reporting enabled on CPU#3.
>>>>> (XEN) CPU3: Thermal monitoring enabled (TM2)
>>>>> (XEN) CMCI: CPU3 has no CMCI support
>>>>> (XEN) CPU3: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
>>>>> stepping 06 (XEN) Booting processor 4/1 eip 8c000
>>>>> (XEN) Initializing CPU#4
>>>>> (XEN) masked ExtINT on CPU#4
>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>> (XEN) CPU: L2 cache: 6144K
>>>>> (XEN) CPU: Physical Processor ID: 0
>>>>> (XEN) CPU: Processor Core ID: 1
>>>>> (XEN) Intel machine check reporting enabled on CPU#4.
>>>>> (XEN) CPU4: Thermal monitoring enabled (TM2)
>>>>> (XEN) CMCI: CPU4 has no CMCI support
>>>>> (XEN) CPU4: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
>>>>> stepping 06 (XEN) Booting processor 5/3 eip 8c000
>>>>> (XEN) Initializing CPU#5
>>>>> (XEN) masked ExtINT on CPU#5
>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>> (XEN) CPU: L2 cache: 6144K
>>>>> (XEN) CPU: Physical Processor ID: 0
>>>>> (XEN) CPU: Processor Core ID: 3
>>>>> (XEN) Intel machine check reporting enabled on CPU#5.
>>>>> (XEN) CPU5: Thermal monitoring enabled (TM2)
>>>>> (XEN) CMCI: CPU5 has no CMCI support
>>>>> (XEN) CPU5: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
>>>>> stepping 06 (XEN) Booting processor 6/5 eip 8c000
>>>>> (XEN) Initializing CPU#6
>>>>> (XEN) masked ExtINT on CPU#6
>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>> (XEN) CPU: L2 cache: 6144K
>>>>> (XEN) CPU: Physical Processor ID: 1
>>>>> (XEN) CPU: Processor Core ID: 1
>>>>> (XEN) Intel machine check reporting enabled on CPU#6.
>>>>> (XEN) CPU6: Thermal monitoring enabled (TM2)
>>>>> (XEN) CMCI: CPU6 has no CMCI support
>>>>> (XEN) CPU6: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
>>>>> stepping 06 (XEN) Booting processor 7/7 eip 8c000
>>>>> (XEN) Initializing CPU#7
>>>>> (XEN) masked ExtINT on CPU#7
>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>> (XEN) CPU: L2 cache: 6144K
>>>>> (XEN) CPU: Physical Processor ID: 1
>>>>> (XEN) CPU: Processor Core ID: 3
>>>>> (XEN) Intel machine check reporting enabled on CPU#7.
>>>>> (XEN) CPU7: Thermal monitoring enabled (TM2)
>>>>> (XEN) CMCI: CPU7 has no CMCI support
>>>>> (XEN) CPU7: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz
>>>>> stepping 06 (XEN) Total of 8 processors activated.
>>>>> (XEN) ENABLING IO-APIC IRQs
>>>>> (XEN)  -> Using new ACK method
>>>>> (XEN) init IO_APIC IRQs
>>>>> (XEN)  IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19,
8-20,
>>>>> 8-21, 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7,
9-8,
>>>>> 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17, 9-18,
9-19,
>>>>> 9-20, 9-21, 9-22, 9-23 not connected. (XEN) ..TIMER:
vector=0xF0
>>>>> apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) number of MP IRQ
sources:
>>>>> 15. (XEN) number of IO-APIC #8 registers: 24.
>>>>> (XEN) number of IO-APIC #9 registers: 24.
>>>>> (XEN) testing the IO APIC.......................
>>>>> (XEN) IO APIC #8......
>>>>> (XEN) .... register #00: 08000000
>>>>> (XEN) .......    : physical APIC id: 08
>>>>> (XEN) .......    : Delivery Type: 0
>>>>> (XEN) .......    : LTS          : 0
>>>>> (XEN) .... register #01: 00170020
>>>>> (XEN) .......     : max redirection entries: 0017
>>>>> (XEN) .......     : PRQ implemented: 0
>>>>> (XEN) .......     : IO APIC version: 0020
>>>>> (XEN) .... IRQ redirection table:
>>>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
>>>>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  01 001 01  0    0    0   0   0    1    1    20
>>>>> (XEN)  02 001 01  0    0    0   0   0    1    1    F0
>>>>> (XEN)  03 001 01  0    0    0   0   0    1    1    28
>>>>> (XEN)  04 001 01  0    0    0   0   0    1    1    30
>>>>> (XEN)  05 001 01  0    0    0   0   0    1    1    38
>>>>> (XEN)  06 001 01  0    0    0   0   0    1    1    40
>>>>> (XEN)  07 001 01  0    0    0   0   0    1    1    48
>>>>> (XEN)  08 001 01  0    0    0   0   0    1    1    50
>>>>> (XEN)  09 001 01  1    1    0   0   0    1    1    58
>>>>> (XEN)  0a 001 01  0    0    0   0   0    1    1    60
>>>>> (XEN)  0b 001 01  0    0    0   0   0    1    1    68
>>>>> (XEN)  0c 001 01  0    0    0   0   0    1    1    70
>>>>> (XEN)  0d 001 01  0    0    0   0   0    1    1    78
>>>>> (XEN)  0e 001 01  0    0    0   0   0    1    1    88
>>>>> (XEN)  0f 001 01  0    0    0   0   0    1    1    90
>>>>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  17 000 00  1    0    0   0   0    0    0    00 (XEN)
IO
>>>>> APIC #9...... (XEN) .... register #00: 09000000
>>>>> (XEN) .......    : physical APIC id: 09
>>>>> (XEN) .......    : Delivery Type: 0
>>>>> (XEN) .......    : LTS          : 0
>>>>> (XEN) .... register #01: 00178020
>>>>> (XEN) .......     : max redirection entries: 0017
>>>>> (XEN) .......     : PRQ implemented: 1
>>>>> (XEN) .......     : IO APIC version: 0020
>>>>> (XEN) .... register #02: 09000000
>>>>> (XEN) .......     : arbitration: 09
>>>>> (XEN) .... register #03: 00000001
>>>>> (XEN) .......     : Boot DT    : 1
>>>>> (XEN) .... IRQ redirection table:
>>>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
>>>>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  01 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  02 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  03 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  04 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  05 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  06 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  07 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  08 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  09 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  0a 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  0b 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  0c 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  0d 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  0e 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  0f 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
>>>>> (XEN) Using vector-based indexing
>>>>> (XEN) IRQ to pin mappings:
>>>>> (XEN) IRQ240 -> 0:2
>>>>> (XEN) IRQ32 -> 0:1
>>>>> (XEN) IRQ40 -> 0:3
>>>>> (XEN) IRQ48 -> 0:4
>>>>> (XEN) IRQ56 -> 0:5
>>>>> (XEN) IRQ64 -> 0:6
>>>>> (XEN) IRQ72 -> 0:7
>>>>> (XEN) IRQ80 -> 0:8
>>>>> (XEN) IRQ88 -> 0:9
>>>>> (XEN) IRQ96 -> 0:10
>>>>> (XEN) IRQ104 -> 0:11
>>>>> (XEN) IRQ112 -> 0:12
>>>>> (XEN) IRQ120 -> 0:13
>>>>> (XEN) IRQ136 -> 0:14
>>>>> (XEN) IRQ144 -> 0:15
>>>>> (XEN) .................................... done.
>>>>> (XEN) Using local APIC timer interrupts.
>>>>> (XEN) calibrating APIC timer ...
>>>>> (XEN) ..... CPU clock speed is 2327.5697 MHz.
>>>>> (XEN) ..... host bus clock speed is 332.5098 MHz.
>>>>> (XEN) ..... bus_scale = 0x00015489
>>>>> (XEN) checking TSC synchronization across 8 CPUs: passed.
>>>>> (XEN) Platform timer is 14.318MHz HPET
>>>>> (XEN) Brought up 8 CPUs
>>>>> (XEN) I/O virtualisation disabled
>>>>> (XEN) HPET: 3 timers in total, 0 timers will be used for
>>>>> broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll:
Machine
>>>>> check polling timer started. (XEN) *** LOADING DOMAIN 0 ***
>>>>> (XEN)  Xen  kernel: 64-bit, lsb, compat32
>>>>> (XEN)  Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000
->
>>>>> 0xffffffff8074310c (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>>>> (XEN)  Dom0 alloc.:   0000000256000000->0000000258000000
(253952
>>>>> pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT:
>>>>> (XEN)  Loaded kernel: ffffffff80200000->ffffffff8074310c
>>>>> (XEN)  Init. ramdisk: ffffffff80744000->ffffffff80f63a00
>>>>> (XEN)  Phys-Mach map: ffffffff80f64000->ffffffff81164000
>>>>> (XEN)  Start info:    ffffffff81164000->ffffffff811644b4
>>>>> (XEN)  Page tables:   ffffffff81165000->ffffffff81172000
>>>>> (XEN)  Boot stack:    ffffffff81172000->ffffffff81173000
>>>>> (XEN)  TOTAL:         ffffffff80000000->ffffffff81400000
>>>>> (XEN)  ENTRY ADDRESS: ffffffff80200000
>>>>> (XEN) Dom0 has maximum 1 VCPUs
>>>>> (XEN) Scrubbing Free
>>>>> RAM:
>>>>>
> ...............................................................
> .......do
>>> ne.
>>>>> (XEN) Xen trace buffers: disabled
>>>>> (XEN) Std. Loglevel: All
>>>>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and
warnings)
>>>>> (XEN) Xen is relinquishing VGA console.
>>>>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a'
three times to
>>>>> switch input to Xen) (XEN) Freed 124kB init memory.
>>>>>
>>>>>
===========================================>>>>>
>>>>> [root@b52 ~]# xenpm get-cpuidle-states
>>>>> Max C-state: C7
>>>>>
>>>>> cpu id               : 0
>>>>> total C-states       : 0
>>>>> idle time(ms)        : 0
>>>>>
>>>>> cpu id               : 1
>>>>> total C-states       : 0
>>>>> idle time(ms)        : 0
>>>>>
>>>>> cpu id               : 2
>>>>> total C-states       : 0
>>>>> idle time(ms)        : 0
>>>>>
>>>>> cpu id               : 3
>>>>> total C-states       : 0
>>>>> idle time(ms)        : 0
>>>>>
>>>>> cpu id               : 4
>>>>> total C-states       : 0
>>>>> idle time(ms)        : 0
>>>>>
>>>>> cpu id               : 5
>>>>> total C-states       : 0
>>>>> idle time(ms)        : 0
>>>>>
>>>>> cpu id               : 6
>>>>> total C-states       : 0
>>>>> idle time(ms)        : 0
>>>>>
>>>>> cpu id               : 7
>>>>> total C-states       : 0
>>>>> idle time(ms)        : 0
>>>>>
>>>>> [root@b52 ~]# xenpm get-cpufreq-states
>>>>> [root@b52 ~]# xenpm get-cpufreq-para
>>>>> [CPU0] failed to get cpufreq parameter
>>>>> [CPU1] failed to get cpufreq parameter
>>>>> [CPU2] failed to get cpufreq parameter
>>>>> [CPU3] failed to get cpufreq parameter
>>>>> [CPU4] failed to get cpufreq parameter
>>>>> [CPU5] failed to get cpufreq parameter
>>>>> [CPU6] failed to get cpufreq parameter
>>>>> [CPU7] failed to get cpufreq parameter
>>>>>
>>>>>
>>>>> Thanks
>>>>>
>>>>> Mike
>>>>
>>>>
>>>> _______________________________________________
>>>> Xen-devel mailing list
>>>> Xen-devel@lists.xensource.com
>>>> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Mike Brady

2009-Jun-04 10:19 UTC

head link

RE: [Xen-devel] [Fwd: Problems with power management]

I have just tried that.  It has made no difference.  

May be the Centos kernel does not have something that is required.  What
needs to be enabled in the Dom0 kernel for PM to work?

On Thu, 2009-06-04 at 18:05 +0800, Wei, Gang wrote:> Can you try with removing "dom0_max_vcpus=1" from the grub line?
I suspect this is a dom0 kernel issue. The upstream 2.6.18 xen-linux kernel
works well as dom0 kernel with PM. I am not sure about Centos 5.3 kernel.
> 
> Jimmy
> 
> Mike Brady wrote:
> > The BIOS has the following options, both of which are enabled:
> > - Intel Speed Step
> > - Deep C-State Support
> >
> > As reported by /proc/cpuinfo the cpu speed does vary using a native
> > Linux kernel.
> >
> > Sorry but I am not in a position to do my own build at the moment.  I
> > may be able to try it next week.
> >
> > Thanks
> >
> > Mike
> >
> > On Thu, 2009-06-04 at 16:41 +0800, Wei, Gang wrote:
> >> Hi, Mike,
> >>
> >> Are there any BIOS options in your box related with C-states
> > or P-states? These may be disabled.
> >>
> >> Or can you try the native Linux first to make sure you can see the
> >> PM effect?
> >>
> >> Further, if you can rebuild Xen yourself, please turn on the
> > C/P state debug flag ( e.g. uncomment/*#define DEBUG_PM_CX*/
> > in cpu_idle.c) , and repost the serial log for more detail info.
> >>
> >> Jimmy
> >>
> >>> -----Original Message-----
> >>> From: Keir Fraser [mailto:keir.fraser@eu.citrix.com]
> >>> Sent: 2009年6月4日 15:47
> >>> To: mike.brady@devnull.net.nz; xen-devel
> >>> Cc: Wei, Gang
> >>> Subject: Re: [Xen-devel] [Fwd: Problems with power management]
> >>>
> >>> Your best bet tool here is ''hg -v history
tools/misc/xenpm.c |
> >>> less'' and pick one of the developers of the
component. In this case
> >>> Wei Gang would be plausible (cc''ed).
> >>>
> >>> -- Keir
> >>>
> >>> On 04/06/2009 06:40, "Mike Brady"
<mike.brady@devnull.net.nz> wrote:
> >>>
> >>>> I posted this on the user list but it has been suggested
to me
> >>>> that it may pay to ask on the devel list as well as I
didn''t get
> >>>> any responses.
> >>>>
> >>>> Thanks
> >>>>
> >>>> Mike
> >>>>
> >>>> -------- Forwarded Message --------
> >>>>> From: Mike Brady <mike.brady@devnull.net.nz>
> >>>>> Reply-To: mike.brady@devnull.net.nz
> >>>>> To: xen-users@lists.xensource.com
<xen-users@lists.xensource.com>
> >>>>> Subject: Problems with power management
> >>>>> Date: Sat, 30 May 2009 16:28:11 +1200
> >>>>>
> >>>>> I do not seem to be able to get any where with the
power
> >>>>> management functions. I have had a look at the xenpm
Wiki page,
> >>>>> but it hasn''t helped.  Its probably something
completely obvious,
> >>>>> but I can''t see it.
> >>>>>
> >>>>> I running Xen 3.4.0 on Centos 5.3 x86_64 using the
gitco RPMs on
> >>>>> an Intel S5000PSL motherboard with 2 x Xeon 5410s. 
Dom0 is
> >>>>> running the latest Centos 5.3 kernel.
> >>>>>
> >>>>> My xm dmesg output is below followed by the output
that I get
> >>>>> from the xenpm get* commands, which isn''t
much.
> >>>>>
> >>>>> ===========================================>
>>>>> [root@b52 ~]# xm dmesg
> >>>>>  __  __            _____ _  _    ___
> >>>>>  \ \/ /___ _ __   |___ /| || |  / _ \
> >>>>>   \  // _ \ ''_ \    |_ \| || |_| | | |
> >>>>>   /  \  __/ | | |  ___) |__   _| |_| |
> >>>>>  /_/\_\___|_| |_| |____(_) |_|(_)___/
> >>>>>
> >>>>> (XEN) Xen version 3.4.0 (root@gitco.tld) (gcc version
4.1.2
> >>>>> 20080704 (Red Hat 4.1.2-44)) Wed May 27 21:53:09 CEST
2009
> >>>>> (XEN) Latest ChangeSet: unavailable
> >>>>> (XEN) Command line: cpufreq=xen cpuidle
dom0_max_vcpus=1
> >>>>> dom0_vcpus_pin=true dom0_mem=1024M
> > apic_verbosity=verbose loglvl=all
> >>>>> (XEN) Video information:
> >>>>> (XEN)  VGA is text mode 80x25, font 8x16
> >>>>> (XEN)  VBE/DDC methods: none; EDID transfer time: 2
seconds
> >>>>> (XEN)  EDID info not retrieved because no DDC
retrieval method
> >>>>> detected (XEN) Disc information: (XEN)  Found 2 MBR
signatures
> >>>>> (XEN)  Found 2 EDD information structures
> >>>>> (XEN) Xen-e820 RAM map:
> >>>>> (XEN)  0000000000000000 - 000000000009f400 (usable)
> >>>>> (XEN)  000000000009f400 - 0000000000100000 (reserved)
> >>>>> (XEN)  0000000000100000 - 000000009e2e1000 (usable)
> >>>>> (XEN)  000000009e2e1000 - 000000009e3a3000 (ACPI NVS)
> >>>>> (XEN)  000000009e3a3000 - 000000009fa32000 (usable)
> >>>>> (XEN)  000000009fa32000 - 000000009fa9a000 (reserved)
> >>>>> (XEN)  000000009fa9a000 - 000000009faac000 (usable)
> >>>>> (XEN)  000000009faac000 - 000000009fb1a000 (ACPI NVS)
> >>>>> (XEN)  000000009fb1a000 - 000000009fb26000 (usable)
> >>>>> (XEN)  000000009fb26000 - 000000009fb3a000 (ACPI data)
> >>>>> (XEN)  000000009fb3a000 - 000000009fc00000 (usable)
> >>>>> (XEN)  000000009fc00000 - 00000000b0000000 (reserved)
> >>>>> (XEN)  00000000ffc00000 - 00000000ffc0c000 (reserved)
> >>>>> (XEN)  0000000100000000 - 0000000260000000 (usable)
> >>>>> (XEN) System RAM: 8185MB (8382412kB)
> >>>>> (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
> >>>>> (XEN) ACPI: XSDT 9FB39120, 0084 (r1 INTEL  S5000PSL   
0 INTL
> >>>>> 1000013) (XEN) ACPI: FACP 9FB37000, 00F4 (r3 INTEL 
S5000PSL
> >>>>> 0 INTL 1000013) (XEN) ACPI: DSDT 9FB30000, 57F6 (r2
INTEL
> >>>>> S5000PSL        1 INTL 1000013) (XEN) ACPI: FACS
9FAAC000, 0040
> >>>>> (XEN) ACPI: APIC 9FB36000, 00C8 (r1 INTEL  S5000PSL   
0 INTL
> >>>>> 1000013) (XEN) ACPI: SPCR 9FB2F000, 0050 (r1 INTEL 
S5000PSL
> >>>>> 0 INTL 1000013) (XEN) ACPI: HPET 9FB2E000, 0038 (r1
INTEL
> >>>>> S5000PSL        1 INTL 1000013) (XEN) ACPI: MCFG
9FB2D000, 003C
> >>>>> (r1 INTEL  S5000PSL        1 INTL 1000013) (XEN) ACPI:
SSDT
> >>>>> 9FB2C000, 0A14 (r2 INTEL  EIST         4000 INTL
1000013) (XEN)
> >>>>> ACPI: SSDT 9FB2B000, 0193 (r2 INTEL  IPMI         4000
INTL
> >>>>> 1000013) (XEN) ACPI: SSDT 9FB2A000, 00CE (r2 INTEL 
CST
> >>>>> 4000 INTL 1000013) (XEN) ACPI: HEST 9FB29000, 00A8 (r1
INTEL
> >>>>> S5000PSL        1 INTL 1) (XEN) ACPI: BERT 9FB28000,
0030 (r1
> >>>>> INTEL  S5000PSL        1 INTL 1) (XEN) ACPI: ERST
9FB27000, 0230
> >>>>> (r1 INTEL  S5000PSL        1 INTL 1) (XEN) ACPI: EINJ
9FB26000,
> >>>>> 0130 (r1 INTEL  S5000PSL        1 INTL 1) (XEN) NUMA
turned off
> >>>>> (XEN) Faking a node at
0000000000000000-0000000260000000 (XEN)
> >>>>> Domain heap initialised (XEN) found SMP MP-table at
000fd190
> >>>>> (XEN) DMI 2.5 present. (XEN) Using APIC driver default
> >>>>> (XEN) ACPI: PM-Timer IO Port: 0x408
> >>>>> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0],
pm1x_evt[400,0]
> >>>>> (XEN) ACPI:                  wakeup_vec[9faac00c],
vec_size[20]
> >>>>> (XEN) ACPI: Local APIC address 0xfee00000
> >>>>> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00]
enabled)
> >>>>> (XEN) Processor #0 7:7 APIC version 20
> >>>>> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02]
enabled)
> >>>>> (XEN) Processor #2 7:7 APIC version 20
> >>>>> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04]
enabled)
> >>>>> (XEN) Processor #4 7:7 APIC version 20
> >>>>> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06]
enabled)
> >>>>> (XEN) Processor #6 7:7 APIC version 20
> >>>>> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01]
enabled)
> >>>>> (XEN) Processor #1 7:7 APIC version 20
> >>>>> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03]
enabled)
> >>>>> (XEN) Processor #3 7:7 APIC version 20
> >>>>> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05]
enabled)
> >>>>> (XEN) Processor #5 7:7 APIC version 20
> >>>>> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07]
enabled)
> >>>>> (XEN) Processor #7 7:7 APIC version 20
> >>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high level
lint[0x1])
> >>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high level
lint[0x1])
> >>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high level
lint[0x1])
> >>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high level
lint[0x1])
> >>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high level
lint[0x1])
> >>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high level
lint[0x1])
> >>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high level
lint[0x1])
> >>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high level
lint[0x1])
> >>>>> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000]
gsi_base[0])
> >>>>> (XEN) IOAPIC[0]: apic_id 8, version 32, address
0xfec00000, GSI
> >>>>> 0-23 (XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000]
> >>>>> gsi_base[24]) (XEN) IOAPIC[1]: apic_id 9, version 32,
address
> >>>>> 0xfec80000, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0
bus_irq 0
> >>>>> global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0
bus_irq 9
> >>>>> global_irq 9 high level) (XEN) ACPI: IRQ0 used by
override.
> >>>>> (XEN) ACPI: IRQ2 used by override.
> >>>>> (XEN) ACPI: IRQ9 used by override.
> >>>>> (XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
> >>>>> (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
> >>>>> (XEN) Using ACPI (MADT) for SMP configuration
information
> >>>>> (XEN) mapped APIC to ffff828bffffe000 (fee00000)
> >>>>> (XEN) mapped IOAPIC to ffff828bffffd000 (fec00000)
> >>>>> (XEN) mapped IOAPIC to ffff828bffffc000 (fec80000)
> >>>>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN)
> >>>>> Initializing CPU#0 (XEN) Detected 2327.591 MHz
processor.
> >>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>> (XEN) CPU: L2 cache: 6144K
> >>>>> (XEN) CPU: Physical Processor ID: 0
> >>>>> (XEN) CPU: Processor Core ID: 0
> >>>>> (XEN) VMX: Supported advanced features:
> >>>>> (XEN)  - APIC MMIO access virtualisation
> >>>>> (XEN)  - APIC TPR shadow
> >>>>> (XEN)  - Virtual NMI
> >>>>> (XEN)  - MSR direct-access bitmap
> >>>>> (XEN) HVM: VMX enabled
> >>>>> (XEN) Intel machine check reporting enabled on CPU#0.
> >>>>> (XEN) CPU0: Thermal monitoring enabled (TM2)
> >>>>> (XEN) CMCI: CPU0 has no CMCI support
> >>>>> (XEN) CPU0: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
> >>>>> stepping 06 (XEN) enabled ExtINT on CPU#0 (XEN)
Booting processor
> >>>>> 1/2 eip 8c000 (XEN) Initializing CPU#1
> >>>>> (XEN) masked ExtINT on CPU#1
> >>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>> (XEN) CPU: L2 cache: 6144K
> >>>>> (XEN) CPU: Physical Processor ID: 0
> >>>>> (XEN) CPU: Processor Core ID: 2
> >>>>> (XEN) Intel machine check reporting enabled on CPU#1.
> >>>>> (XEN) CPU1: Thermal monitoring enabled (TM2)
> >>>>> (XEN) CMCI: CPU1 has no CMCI support
> >>>>> (XEN) CPU1: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
> >>>>> stepping 06 (XEN) Booting processor 2/4 eip 8c000
> >>>>> (XEN) Initializing CPU#2
> >>>>> (XEN) masked ExtINT on CPU#2
> >>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>> (XEN) CPU: L2 cache: 6144K
> >>>>> (XEN) CPU: Physical Processor ID: 1
> >>>>> (XEN) CPU: Processor Core ID: 0
> >>>>> (XEN) Intel machine check reporting enabled on CPU#2.
> >>>>> (XEN) CPU2: Thermal monitoring enabled (TM2)
> >>>>> (XEN) CMCI: CPU2 has no CMCI support
> >>>>> (XEN) CPU2: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
> >>>>> stepping 06 (XEN) Booting processor 3/6 eip 8c000
> >>>>> (XEN) Initializing CPU#3
> >>>>> (XEN) masked ExtINT on CPU#3
> >>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>> (XEN) CPU: L2 cache: 6144K
> >>>>> (XEN) CPU: Physical Processor ID: 1
> >>>>> (XEN) CPU: Processor Core ID: 2
> >>>>> (XEN) Intel machine check reporting enabled on CPU#3.
> >>>>> (XEN) CPU3: Thermal monitoring enabled (TM2)
> >>>>> (XEN) CMCI: CPU3 has no CMCI support
> >>>>> (XEN) CPU3: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
> >>>>> stepping 06 (XEN) Booting processor 4/1 eip 8c000
> >>>>> (XEN) Initializing CPU#4
> >>>>> (XEN) masked ExtINT on CPU#4
> >>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>> (XEN) CPU: L2 cache: 6144K
> >>>>> (XEN) CPU: Physical Processor ID: 0
> >>>>> (XEN) CPU: Processor Core ID: 1
> >>>>> (XEN) Intel machine check reporting enabled on CPU#4.
> >>>>> (XEN) CPU4: Thermal monitoring enabled (TM2)
> >>>>> (XEN) CMCI: CPU4 has no CMCI support
> >>>>> (XEN) CPU4: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
> >>>>> stepping 06 (XEN) Booting processor 5/3 eip 8c000
> >>>>> (XEN) Initializing CPU#5
> >>>>> (XEN) masked ExtINT on CPU#5
> >>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>> (XEN) CPU: L2 cache: 6144K
> >>>>> (XEN) CPU: Physical Processor ID: 0
> >>>>> (XEN) CPU: Processor Core ID: 3
> >>>>> (XEN) Intel machine check reporting enabled on CPU#5.
> >>>>> (XEN) CPU5: Thermal monitoring enabled (TM2)
> >>>>> (XEN) CMCI: CPU5 has no CMCI support
> >>>>> (XEN) CPU5: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
> >>>>> stepping 06 (XEN) Booting processor 6/5 eip 8c000
> >>>>> (XEN) Initializing CPU#6
> >>>>> (XEN) masked ExtINT on CPU#6
> >>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>> (XEN) CPU: L2 cache: 6144K
> >>>>> (XEN) CPU: Physical Processor ID: 1
> >>>>> (XEN) CPU: Processor Core ID: 1
> >>>>> (XEN) Intel machine check reporting enabled on CPU#6.
> >>>>> (XEN) CPU6: Thermal monitoring enabled (TM2)
> >>>>> (XEN) CMCI: CPU6 has no CMCI support
> >>>>> (XEN) CPU6: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
> >>>>> stepping 06 (XEN) Booting processor 7/7 eip 8c000
> >>>>> (XEN) Initializing CPU#7
> >>>>> (XEN) masked ExtINT on CPU#7
> >>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>> (XEN) CPU: L2 cache: 6144K
> >>>>> (XEN) CPU: Physical Processor ID: 1
> >>>>> (XEN) CPU: Processor Core ID: 3
> >>>>> (XEN) Intel machine check reporting enabled on CPU#7.
> >>>>> (XEN) CPU7: Thermal monitoring enabled (TM2)
> >>>>> (XEN) CMCI: CPU7 has no CMCI support
> >>>>> (XEN) CPU7: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
> >>>>> stepping 06 (XEN) Total of 8 processors activated.
> >>>>> (XEN) ENABLING IO-APIC IRQs
> >>>>> (XEN)  -> Using new ACK method
> >>>>> (XEN) init IO_APIC IRQs
> >>>>> (XEN)  IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18,
8-19, 8-20,
> >>>>> 8-21, 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6,
9-7, 9-8,
> >>>>> 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17,
9-18, 9-19,
> >>>>> 9-20, 9-21, 9-22, 9-23 not connected. (XEN) ..TIMER:
vector=0xF0
> >>>>> apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) number of MP IRQ
sources:
> >>>>> 15. (XEN) number of IO-APIC #8 registers: 24.
> >>>>> (XEN) number of IO-APIC #9 registers: 24.
> >>>>> (XEN) testing the IO APIC.......................
> >>>>> (XEN) IO APIC #8......
> >>>>> (XEN) .... register #00: 08000000
> >>>>> (XEN) .......    : physical APIC id: 08
> >>>>> (XEN) .......    : Delivery Type: 0
> >>>>> (XEN) .......    : LTS          : 0
> >>>>> (XEN) .... register #01: 00170020
> >>>>> (XEN) .......     : max redirection entries: 0017
> >>>>> (XEN) .......     : PRQ implemented: 0
> >>>>> (XEN) .......     : IO APIC version: 0020
> >>>>> (XEN) .... IRQ redirection table:
> >>>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli
Vect:
> >>>>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  01 001 01  0    0    0   0   0    1    1    20
> >>>>> (XEN)  02 001 01  0    0    0   0   0    1    1    F0
> >>>>> (XEN)  03 001 01  0    0    0   0   0    1    1    28
> >>>>> (XEN)  04 001 01  0    0    0   0   0    1    1    30
> >>>>> (XEN)  05 001 01  0    0    0   0   0    1    1    38
> >>>>> (XEN)  06 001 01  0    0    0   0   0    1    1    40
> >>>>> (XEN)  07 001 01  0    0    0   0   0    1    1    48
> >>>>> (XEN)  08 001 01  0    0    0   0   0    1    1    50
> >>>>> (XEN)  09 001 01  1    1    0   0   0    1    1    58
> >>>>> (XEN)  0a 001 01  0    0    0   0   0    1    1    60
> >>>>> (XEN)  0b 001 01  0    0    0   0   0    1    1    68
> >>>>> (XEN)  0c 001 01  0    0    0   0   0    1    1    70
> >>>>> (XEN)  0d 001 01  0    0    0   0   0    1    1    78
> >>>>> (XEN)  0e 001 01  0    0    0   0   0    1    1    88
> >>>>> (XEN)  0f 001 01  0    0    0   0   0    1    1    90
> >>>>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
(XEN) IO
> >>>>> APIC #9...... (XEN) .... register #00: 09000000
> >>>>> (XEN) .......    : physical APIC id: 09
> >>>>> (XEN) .......    : Delivery Type: 0
> >>>>> (XEN) .......    : LTS          : 0
> >>>>> (XEN) .... register #01: 00178020
> >>>>> (XEN) .......     : max redirection entries: 0017
> >>>>> (XEN) .......     : PRQ implemented: 1
> >>>>> (XEN) .......     : IO APIC version: 0020
> >>>>> (XEN) .... register #02: 09000000
> >>>>> (XEN) .......     : arbitration: 09
> >>>>> (XEN) .... register #03: 00000001
> >>>>> (XEN) .......     : Boot DT    : 1
> >>>>> (XEN) .... IRQ redirection table:
> >>>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli
Vect:
> >>>>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  01 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  02 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  03 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  04 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  05 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  06 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  07 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  08 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  09 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  0a 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  0b 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  0c 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  0d 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  0e 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  0f 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
> >>>>> (XEN) Using vector-based indexing
> >>>>> (XEN) IRQ to pin mappings:
> >>>>> (XEN) IRQ240 -> 0:2
> >>>>> (XEN) IRQ32 -> 0:1
> >>>>> (XEN) IRQ40 -> 0:3
> >>>>> (XEN) IRQ48 -> 0:4
> >>>>> (XEN) IRQ56 -> 0:5
> >>>>> (XEN) IRQ64 -> 0:6
> >>>>> (XEN) IRQ72 -> 0:7
> >>>>> (XEN) IRQ80 -> 0:8
> >>>>> (XEN) IRQ88 -> 0:9
> >>>>> (XEN) IRQ96 -> 0:10
> >>>>> (XEN) IRQ104 -> 0:11
> >>>>> (XEN) IRQ112 -> 0:12
> >>>>> (XEN) IRQ120 -> 0:13
> >>>>> (XEN) IRQ136 -> 0:14
> >>>>> (XEN) IRQ144 -> 0:15
> >>>>> (XEN) .................................... done.
> >>>>> (XEN) Using local APIC timer interrupts.
> >>>>> (XEN) calibrating APIC timer ...
> >>>>> (XEN) ..... CPU clock speed is 2327.5697 MHz.
> >>>>> (XEN) ..... host bus clock speed is 332.5098 MHz.
> >>>>> (XEN) ..... bus_scale = 0x00015489
> >>>>> (XEN) checking TSC synchronization across 8 CPUs:
passed.
> >>>>> (XEN) Platform timer is 14.318MHz HPET
> >>>>> (XEN) Brought up 8 CPUs
> >>>>> (XEN) I/O virtualisation disabled
> >>>>> (XEN) HPET: 3 timers in total, 0 timers will be used
for
> >>>>> broadcast (XEN) ACPI sleep modes: S3 (XEN)
mcheck_poll: Machine
> >>>>> check polling timer started. (XEN) *** LOADING DOMAIN
0 ***
> >>>>> (XEN)  Xen  kernel: 64-bit, lsb, compat32
> >>>>> (XEN)  Dom0 kernel: 64-bit, lsb, paddr
0xffffffff80200000 ->
> >>>>> 0xffffffff8074310c (XEN) PHYSICAL MEMORY ARRANGEMENT:
> >>>>> (XEN)  Dom0 alloc.:  
0000000256000000->0000000258000000 (253952
> >>>>> pages to be allocated) (XEN) VIRTUAL MEMORY
ARRANGEMENT:
> >>>>> (XEN)  Loaded kernel:
ffffffff80200000->ffffffff8074310c
> >>>>> (XEN)  Init. ramdisk:
ffffffff80744000->ffffffff80f63a00
> >>>>> (XEN)  Phys-Mach map:
ffffffff80f64000->ffffffff81164000
> >>>>> (XEN)  Start info:   
ffffffff81164000->ffffffff811644b4
> >>>>> (XEN)  Page tables:  
ffffffff81165000->ffffffff81172000
> >>>>> (XEN)  Boot stack:   
ffffffff81172000->ffffffff81173000
> >>>>> (XEN)  TOTAL:        
ffffffff80000000->ffffffff81400000
> >>>>> (XEN)  ENTRY ADDRESS: ffffffff80200000
> >>>>> (XEN) Dom0 has maximum 1 VCPUs
> >>>>> (XEN) Scrubbing Free
> >>>>> RAM:
> >>>>>
> > ...............................................................
> > .......do
> >>> ne.
> >>>>> (XEN) Xen trace buffers: disabled
> >>>>> (XEN) Std. Loglevel: All
> >>>>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors
and warnings)
> >>>>> (XEN) Xen is relinquishing VGA console.
> >>>>> (XEN) *** Serial input -> DOM0 (type
''CTRL-a'' three times to
> >>>>> switch input to Xen) (XEN) Freed 124kB init memory.
> >>>>>
> >>>>> ===========================================>
>>>>>
> >>>>> [root@b52 ~]# xenpm get-cpuidle-states
> >>>>> Max C-state: C7
> >>>>>
> >>>>> cpu id               : 0
> >>>>> total C-states       : 0
> >>>>> idle time(ms)        : 0
> >>>>>
> >>>>> cpu id               : 1
> >>>>> total C-states       : 0
> >>>>> idle time(ms)        : 0
> >>>>>
> >>>>> cpu id               : 2
> >>>>> total C-states       : 0
> >>>>> idle time(ms)        : 0
> >>>>>
> >>>>> cpu id               : 3
> >>>>> total C-states       : 0
> >>>>> idle time(ms)        : 0
> >>>>>
> >>>>> cpu id               : 4
> >>>>> total C-states       : 0
> >>>>> idle time(ms)        : 0
> >>>>>
> >>>>> cpu id               : 5
> >>>>> total C-states       : 0
> >>>>> idle time(ms)        : 0
> >>>>>
> >>>>> cpu id               : 6
> >>>>> total C-states       : 0
> >>>>> idle time(ms)        : 0
> >>>>>
> >>>>> cpu id               : 7
> >>>>> total C-states       : 0
> >>>>> idle time(ms)        : 0
> >>>>>
> >>>>> [root@b52 ~]# xenpm get-cpufreq-states
> >>>>> [root@b52 ~]# xenpm get-cpufreq-para
> >>>>> [CPU0] failed to get cpufreq parameter
> >>>>> [CPU1] failed to get cpufreq parameter
> >>>>> [CPU2] failed to get cpufreq parameter
> >>>>> [CPU3] failed to get cpufreq parameter
> >>>>> [CPU4] failed to get cpufreq parameter
> >>>>> [CPU5] failed to get cpufreq parameter
> >>>>> [CPU6] failed to get cpufreq parameter
> >>>>> [CPU7] failed to get cpufreq parameter
> >>>>>
> >>>>>
> >>>>> Thanks
> >>>>>
> >>>>> Mike
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> Xen-devel mailing list
> >>>> Xen-devel@lists.xensource.com
> >>>> http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Wei, Gang

2009-Jun-04 10:53 UTC

head link

RE: [Xen-devel] [Fwd: Problems with power management]

The dom0 kernel need to be modified to pass acpi info about C/P states to Xen.
Xen depends on dom0 to get those information.

Jimmy

Mike Brady wrote:> I have just tried that.  It has made no difference.
>
> May be the Centos kernel does not have something that is required.
> What needs to be enabled in the Dom0 kernel for PM to work?
>
> On Thu, 2009-06-04 at 18:05 +0800, Wei, Gang wrote:
>> Can you try with removing "dom0_max_vcpus=1" from the grub
> line? I suspect this is a dom0 kernel issue. The upstream
> 2.6.18 xen-linux kernel works well as dom0 kernel with PM. I
> am not sure about Centos 5.3 kernel.
>>
>> Jimmy
>>
>> Mike Brady wrote:
>>> The BIOS has the following options, both of which are enabled:
>>> - Intel Speed Step
>>> - Deep C-State Support
>>>
>>> As reported by /proc/cpuinfo the cpu speed does vary using a native
>>> Linux kernel.
>>>
>>> Sorry but I am not in a position to do my own build at the moment.
>>> I may be able to try it next week.
>>>
>>> Thanks
>>>
>>> Mike
>>>
>>> On Thu, 2009-06-04 at 16:41 +0800, Wei, Gang wrote:
>>>> Hi, Mike,
>>>>
>>>> Are there any BIOS options in your box related with C-states
>>> or P-states? These may be disabled.
>>>>
>>>> Or can you try the native Linux first to make sure you can see
the
>>>> PM effect?
>>>>
>>>> Further, if you can rebuild Xen yourself, please turn on the
>>> C/P state debug flag ( e.g. uncomment/*#define DEBUG_PM_CX*/
>>> in cpu_idle.c) , and repost the serial log for more detail info.
>>>>
>>>> Jimmy
>>>>
>>>>> -----Original Message-----
>>>>> From: Keir Fraser [mailto:keir.fraser@eu.citrix.com]
>>>>> Sent: 2009年6月4日 15:47
>>>>> To: mike.brady@devnull.net.nz; xen-devel
>>>>> Cc: Wei, Gang
>>>>> Subject: Re: [Xen-devel] [Fwd: Problems with power
management]
>>>>>
>>>>> Your best bet tool here is 'hg -v history
tools/misc/xenpm.c |
>>>>> less' and pick one of the developers of the component.
In this
>>>>> case Wei Gang would be plausible (cc'ed).
>>>>>
>>>>> -- Keir
>>>>>
>>>>> On 04/06/2009 06:40, "Mike Brady"
> <mike.brady@devnull.net.nz> wrote:
>>>>>
>>>>>> I posted this on the user list but it has been
suggested to me
>>>>>> that it may pay to ask on the devel list as well as I
didn't get
>>>>>> any responses.
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> Mike
>>>>>>
>>>>>> -------- Forwarded Message --------
>>>>>>> From: Mike Brady <mike.brady@devnull.net.nz>
>>>>>>> Reply-To: mike.brady@devnull.net.nz
>>>>>>> To: xen-users@lists.xensource.com
> <xen-users@lists.xensource.com>
>>>>>>> Subject: Problems with power management
>>>>>>> Date: Sat, 30 May 2009 16:28:11 +1200
>>>>>>>
>>>>>>> I do not seem to be able to get any where with the
power
>>>>>>> management functions. I have had a look at the
xenpm Wiki page,
>>>>>>> but it hasn't helped.  Its probably something
completely
>>>>>>> obvious, but I can't see it.
>>>>>>>
>>>>>>> I running Xen 3.4.0 on Centos 5.3 x86_64 using the
gitco RPMs on
>>>>>>> an Intel S5000PSL motherboard with 2 x Xeon 5410s. 
Dom0 is
>>>>>>> running the latest Centos 5.3 kernel.
>>>>>>>
>>>>>>> My xm dmesg output is below followed by the output
that I get
>>>>>>> from the xenpm get* commands, which isn't much.
>>>>>>>
>>>>>>>
===========================================>>>>>>>
[root@b52 ~]# xm dmesg
>>>>>>>  __  __            _____ _  _    ___
>>>>>>>  \ \/ /___ _ __   |___ /| || |  / _ \
>>>>>>>   \  // _ \ '_ \    |_ \| || |_| | | |
>>>>>>>   /  \  __/ | | |  ___) |__   _| |_| |
>>>>>>>  /_/\_\___|_| |_| |____(_) |_|(_)___/
>>>>>>>
>>>>>>> (XEN) Xen version 3.4.0 (root@gitco.tld) (gcc
version 4.1.2
>>>>>>> 20080704 (Red Hat 4.1.2-44)) Wed May 27 21:53:09
CEST 2009
>>>>>>> (XEN) Latest ChangeSet: unavailable
>>>>>>> (XEN) Command line: cpufreq=xen cpuidle
dom0_max_vcpus=1
>>>>>>> dom0_vcpus_pin=true dom0_mem=1024M
>>> apic_verbosity=verbose loglvl=all
>>>>>>> (XEN) Video information:
>>>>>>> (XEN)  VGA is text mode 80x25, font 8x16
>>>>>>> (XEN)  VBE/DDC methods: none; EDID transfer time: 2
seconds
>>>>>>> (XEN)  EDID info not retrieved because no DDC
retrieval method
>>>>>>> detected (XEN) Disc information: (XEN)  Found 2 MBR
signatures
>>>>>>> (XEN)  Found 2 EDD information structures
>>>>>>> (XEN) Xen-e820 RAM map:
>>>>>>> (XEN)  0000000000000000 - 000000000009f400 (usable)
>>>>>>> (XEN)  000000000009f400 - 0000000000100000
(reserved)
>>>>>>> (XEN)  0000000000100000 - 000000009e2e1000 (usable)
>>>>>>> (XEN)  000000009e2e1000 - 000000009e3a3000 (ACPI
NVS)
>>>>>>> (XEN)  000000009e3a3000 - 000000009fa32000 (usable)
>>>>>>> (XEN)  000000009fa32000 - 000000009fa9a000
(reserved)
>>>>>>> (XEN)  000000009fa9a000 - 000000009faac000 (usable)
>>>>>>> (XEN)  000000009faac000 - 000000009fb1a000 (ACPI
NVS)
>>>>>>> (XEN)  000000009fb1a000 - 000000009fb26000 (usable)
>>>>>>> (XEN)  000000009fb26000 - 000000009fb3a000 (ACPI
data)
>>>>>>> (XEN)  000000009fb3a000 - 000000009fc00000 (usable)
>>>>>>> (XEN)  000000009fc00000 - 00000000b0000000
(reserved)
>>>>>>> (XEN)  00000000ffc00000 - 00000000ffc0c000
(reserved)
>>>>>>> (XEN)  0000000100000000 - 0000000260000000 (usable)
>>>>>>> (XEN) System RAM: 8185MB (8382412kB)
>>>>>>> (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
>>>>>>> (XEN) ACPI: XSDT 9FB39120, 0084 (r1 INTEL  S5000PSL
>    0 INTL
>>>>>>> 1000013) (XEN) ACPI: FACP 9FB37000, 00F4 (r3 INTEL 
S5000PSL
>>>>>>> 0 INTL 1000013) (XEN) ACPI: DSDT 9FB30000, 57F6 (r2
INTEL
>>>>>>> S5000PSL        1 INTL 1000013) (XEN) ACPI: FACS
9FAAC000, 0040
>>>>>>> (XEN) ACPI: APIC 9FB36000, 00C8 (r1 INTEL  S5000PSL
>    0 INTL
>>>>>>> 1000013) (XEN) ACPI: SPCR 9FB2F000, 0050 (r1 INTEL 
S5000PSL
>>>>>>> 0 INTL 1000013) (XEN) ACPI: HPET 9FB2E000, 0038 (r1
INTEL
>>>>>>> S5000PSL        1 INTL 1000013) (XEN) ACPI: MCFG
9FB2D000, 003C
>>>>>>> (r1 INTEL  S5000PSL        1 INTL 1000013) (XEN)
ACPI: SSDT
>>>>>>> 9FB2C000, 0A14 (r2 INTEL  EIST         4000 INTL
1000013) (XEN)
>>>>>>> ACPI: SSDT 9FB2B000, 0193 (r2 INTEL  IPMI        
4000 INTL
>>>>>>> 1000013) (XEN) ACPI: SSDT 9FB2A000, 00CE (r2 INTEL 
CST
>>>>>>> 4000 INTL 1000013) (XEN) ACPI: HEST 9FB29000, 00A8
(r1 INTEL
>>>>>>> S5000PSL        1 INTL 1) (XEN) ACPI: BERT
9FB28000, 0030 (r1
>>>>>>> INTEL  S5000PSL        1 INTL 1) (XEN) ACPI: ERST
9FB27000, 0230
>>>>>>> (r1 INTEL  S5000PSL        1 INTL 1) (XEN) ACPI:
EINJ 9FB26000,
>>>>>>> 0130 (r1 INTEL  S5000PSL        1 INTL 1) (XEN)
NUMA turned off
>>>>>>> (XEN) Faking a node at
0000000000000000-0000000260000000 (XEN)
>>>>>>> Domain heap initialised (XEN) found SMP MP-table at
000fd190
>>>>>>> (XEN) DMI 2.5 present. (XEN) Using APIC driver
default
>>>>>>> (XEN) ACPI: PM-Timer IO Port: 0x408
>>>>>>> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0],
pm1x_evt[400,0]
>>>>>>> (XEN) ACPI:                  wakeup_vec[9faac00c],
vec_size[20]
>>>>>>> (XEN) ACPI: Local APIC address 0xfee00000
>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00]
enabled)
>>>>>>> (XEN) Processor #0 7:7 APIC version 20
>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02]
enabled)
>>>>>>> (XEN) Processor #2 7:7 APIC version 20
>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04]
enabled)
>>>>>>> (XEN) Processor #4 7:7 APIC version 20
>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06]
enabled)
>>>>>>> (XEN) Processor #6 7:7 APIC version 20
>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01]
enabled)
>>>>>>> (XEN) Processor #1 7:7 APIC version 20
>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03]
enabled)
>>>>>>> (XEN) Processor #3 7:7 APIC version 20
>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05]
enabled)
>>>>>>> (XEN) Processor #5 7:7 APIC version 20
>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07]
enabled)
>>>>>>> (XEN) Processor #7 7:7 APIC version 20
>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high level
lint[0x1])
>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high level
lint[0x1])
>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high level
lint[0x1])
>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high level
lint[0x1])
>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high level
lint[0x1])
>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high level
lint[0x1])
>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high level
lint[0x1])
>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high level
lint[0x1])
>>>>>>> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000]
gsi_base[0])
>>>>>>> (XEN) IOAPIC[0]: apic_id 8, version 32, address
0xfec00000, GSI
>>>>>>> 0-23 (XEN) ACPI: IOAPIC (id[0x09]
address[0xfec80000]
>>>>>>> gsi_base[24]) (XEN) IOAPIC[1]: apic_id 9, version
32, address
>>>>>>> 0xfec80000, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus
0 bus_irq 0
>>>>>>> global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus
0 bus_irq 9
>>>>>>> global_irq 9 high level) (XEN) ACPI: IRQ0 used by
override.
>>>>>>> (XEN) ACPI: IRQ2 used by override.
>>>>>>> (XEN) ACPI: IRQ9 used by override.
>>>>>>> (XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
>>>>>>> (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
>>>>>>> (XEN) Using ACPI (MADT) for SMP configuration
information
>>>>>>> (XEN) mapped APIC to ffff828bffffe000 (fee00000)
>>>>>>> (XEN) mapped IOAPIC to ffff828bffffd000 (fec00000)
>>>>>>> (XEN) mapped IOAPIC to ffff828bffffc000 (fec80000)
>>>>>>> (XEN) Using scheduler: SMP Credit Scheduler
(credit) (XEN)
>>>>>>> Initializing CPU#0 (XEN) Detected 2327.591 MHz
processor.
>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>> (XEN) CPU: Physical Processor ID: 0
>>>>>>> (XEN) CPU: Processor Core ID: 0
>>>>>>> (XEN) VMX: Supported advanced features:
>>>>>>> (XEN)  - APIC MMIO access virtualisation
>>>>>>> (XEN)  - APIC TPR shadow
>>>>>>> (XEN)  - Virtual NMI
>>>>>>> (XEN)  - MSR direct-access bitmap
>>>>>>> (XEN) HVM: VMX enabled
>>>>>>> (XEN) Intel machine check reporting enabled on
CPU#0.
>>>>>>> (XEN) CPU0: Thermal monitoring enabled (TM2)
>>>>>>> (XEN) CMCI: CPU0 has no CMCI support
>>>>>>> (XEN) CPU0: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
>>>>>>> stepping 06 (XEN) enabled ExtINT on CPU#0 (XEN)
Booting
>>>>>>> processor 1/2 eip 8c000 (XEN) Initializing CPU#1
>>>>>>> (XEN) masked ExtINT on CPU#1
>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>> (XEN) CPU: Physical Processor ID: 0
>>>>>>> (XEN) CPU: Processor Core ID: 2
>>>>>>> (XEN) Intel machine check reporting enabled on
CPU#1.
>>>>>>> (XEN) CPU1: Thermal monitoring enabled (TM2)
>>>>>>> (XEN) CMCI: CPU1 has no CMCI support
>>>>>>> (XEN) CPU1: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
>>>>>>> stepping 06 (XEN) Booting processor 2/4 eip 8c000
>>>>>>> (XEN) Initializing CPU#2
>>>>>>> (XEN) masked ExtINT on CPU#2
>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>> (XEN) CPU: Physical Processor ID: 1
>>>>>>> (XEN) CPU: Processor Core ID: 0
>>>>>>> (XEN) Intel machine check reporting enabled on
CPU#2.
>>>>>>> (XEN) CPU2: Thermal monitoring enabled (TM2)
>>>>>>> (XEN) CMCI: CPU2 has no CMCI support
>>>>>>> (XEN) CPU2: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
>>>>>>> stepping 06 (XEN) Booting processor 3/6 eip 8c000
>>>>>>> (XEN) Initializing CPU#3
>>>>>>> (XEN) masked ExtINT on CPU#3
>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>> (XEN) CPU: Physical Processor ID: 1
>>>>>>> (XEN) CPU: Processor Core ID: 2
>>>>>>> (XEN) Intel machine check reporting enabled on
CPU#3.
>>>>>>> (XEN) CPU3: Thermal monitoring enabled (TM2)
>>>>>>> (XEN) CMCI: CPU3 has no CMCI support
>>>>>>> (XEN) CPU3: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
>>>>>>> stepping 06 (XEN) Booting processor 4/1 eip 8c000
>>>>>>> (XEN) Initializing CPU#4
>>>>>>> (XEN) masked ExtINT on CPU#4
>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>> (XEN) CPU: Physical Processor ID: 0
>>>>>>> (XEN) CPU: Processor Core ID: 1
>>>>>>> (XEN) Intel machine check reporting enabled on
CPU#4.
>>>>>>> (XEN) CPU4: Thermal monitoring enabled (TM2)
>>>>>>> (XEN) CMCI: CPU4 has no CMCI support
>>>>>>> (XEN) CPU4: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
>>>>>>> stepping 06 (XEN) Booting processor 5/3 eip 8c000
>>>>>>> (XEN) Initializing CPU#5
>>>>>>> (XEN) masked ExtINT on CPU#5
>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>> (XEN) CPU: Physical Processor ID: 0
>>>>>>> (XEN) CPU: Processor Core ID: 3
>>>>>>> (XEN) Intel machine check reporting enabled on
CPU#5.
>>>>>>> (XEN) CPU5: Thermal monitoring enabled (TM2)
>>>>>>> (XEN) CMCI: CPU5 has no CMCI support
>>>>>>> (XEN) CPU5: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
>>>>>>> stepping 06 (XEN) Booting processor 6/5 eip 8c000
>>>>>>> (XEN) Initializing CPU#6
>>>>>>> (XEN) masked ExtINT on CPU#6
>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>> (XEN) CPU: Physical Processor ID: 1
>>>>>>> (XEN) CPU: Processor Core ID: 1
>>>>>>> (XEN) Intel machine check reporting enabled on
CPU#6.
>>>>>>> (XEN) CPU6: Thermal monitoring enabled (TM2)
>>>>>>> (XEN) CMCI: CPU6 has no CMCI support
>>>>>>> (XEN) CPU6: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
>>>>>>> stepping 06 (XEN) Booting processor 7/7 eip 8c000
>>>>>>> (XEN) Initializing CPU#7
>>>>>>> (XEN) masked ExtINT on CPU#7
>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>> (XEN) CPU: Physical Processor ID: 1
>>>>>>> (XEN) CPU: Processor Core ID: 3
>>>>>>> (XEN) Intel machine check reporting enabled on
CPU#7.
>>>>>>> (XEN) CPU7: Thermal monitoring enabled (TM2)
>>>>>>> (XEN) CMCI: CPU7 has no CMCI support
>>>>>>> (XEN) CPU7: Intel(R) Xeon(R) CPU           E5410  @
2.33GHz
>>>>>>> stepping 06 (XEN) Total of 8 processors activated.
>>>>>>> (XEN) ENABLING IO-APIC IRQs
>>>>>>> (XEN)  -> Using new ACK method
>>>>>>> (XEN) init IO_APIC IRQs
>>>>>>> (XEN)  IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18,
8-19, 8-20,
>>>>>>> 8-21, 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4, 9-5,
9-6, 9-7, 9-8,
>>>>>>> 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 9-16,
9-17, 9-18, 9-19,
>>>>>>> 9-20, 9-21, 9-22, 9-23 not connected. (XEN)
..TIMER: vector=0xF0
>>>>>>> apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) number of MP
IRQ sources:
>>>>>>> 15. (XEN) number of IO-APIC #8 registers: 24.
>>>>>>> (XEN) number of IO-APIC #9 registers: 24.
>>>>>>> (XEN) testing the IO APIC.......................
>>>>>>> (XEN) IO APIC #8......
>>>>>>> (XEN) .... register #00: 08000000
>>>>>>> (XEN) .......    : physical APIC id: 08
>>>>>>> (XEN) .......    : Delivery Type: 0
>>>>>>> (XEN) .......    : LTS          : 0
>>>>>>> (XEN) .... register #01: 00170020
>>>>>>> (XEN) .......     : max redirection entries: 0017
>>>>>>> (XEN) .......     : PRQ implemented: 0
>>>>>>> (XEN) .......     : IO APIC version: 0020
>>>>>>> (XEN) .... IRQ redirection table:
>>>>>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli
Vect:
>>>>>>> (XEN)  00 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  01 001 01  0    0    0   0   0    1    1   
20
>>>>>>> (XEN)  02 001 01  0    0    0   0   0    1    1   
F0
>>>>>>> (XEN)  03 001 01  0    0    0   0   0    1    1   
28
>>>>>>> (XEN)  04 001 01  0    0    0   0   0    1    1   
30
>>>>>>> (XEN)  05 001 01  0    0    0   0   0    1    1   
38
>>>>>>> (XEN)  06 001 01  0    0    0   0   0    1    1   
40
>>>>>>> (XEN)  07 001 01  0    0    0   0   0    1    1   
48
>>>>>>> (XEN)  08 001 01  0    0    0   0   0    1    1   
50
>>>>>>> (XEN)  09 001 01  1    1    0   0   0    1    1   
58
>>>>>>> (XEN)  0a 001 01  0    0    0   0   0    1    1   
60
>>>>>>> (XEN)  0b 001 01  0    0    0   0   0    1    1   
68
>>>>>>> (XEN)  0c 001 01  0    0    0   0   0    1    1   
70
>>>>>>> (XEN)  0d 001 01  0    0    0   0   0    1    1   
78
>>>>>>> (XEN)  0e 001 01  0    0    0   0   0    1    1   
88
>>>>>>> (XEN)  0f 001 01  0    0    0   0   0    1    1   
90
>>>>>>> (XEN)  10 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  11 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  12 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  13 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  14 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  15 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  16 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  17 000 00  1    0    0   0   0    0    0   
00 (XEN) IO
>>>>>>> APIC #9...... (XEN) .... register #00: 09000000
>>>>>>> (XEN) .......    : physical APIC id: 09
>>>>>>> (XEN) .......    : Delivery Type: 0
>>>>>>> (XEN) .......    : LTS          : 0
>>>>>>> (XEN) .... register #01: 00178020
>>>>>>> (XEN) .......     : max redirection entries: 0017
>>>>>>> (XEN) .......     : PRQ implemented: 1
>>>>>>> (XEN) .......     : IO APIC version: 0020
>>>>>>> (XEN) .... register #02: 09000000
>>>>>>> (XEN) .......     : arbitration: 09
>>>>>>> (XEN) .... register #03: 00000001
>>>>>>> (XEN) .......     : Boot DT    : 1
>>>>>>> (XEN) .... IRQ redirection table:
>>>>>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli
Vect:
>>>>>>> (XEN)  00 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  01 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  02 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  03 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  04 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  05 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  06 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  07 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  08 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  09 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  0a 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  0b 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  0c 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  0d 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  0e 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  0f 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  10 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  11 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  12 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  13 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  14 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  15 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  16 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN)  17 000 00  1    0    0   0   0    0    0   
00
>>>>>>> (XEN) Using vector-based indexing
>>>>>>> (XEN) IRQ to pin mappings:
>>>>>>> (XEN) IRQ240 -> 0:2
>>>>>>> (XEN) IRQ32 -> 0:1
>>>>>>> (XEN) IRQ40 -> 0:3
>>>>>>> (XEN) IRQ48 -> 0:4
>>>>>>> (XEN) IRQ56 -> 0:5
>>>>>>> (XEN) IRQ64 -> 0:6
>>>>>>> (XEN) IRQ72 -> 0:7
>>>>>>> (XEN) IRQ80 -> 0:8
>>>>>>> (XEN) IRQ88 -> 0:9
>>>>>>> (XEN) IRQ96 -> 0:10
>>>>>>> (XEN) IRQ104 -> 0:11
>>>>>>> (XEN) IRQ112 -> 0:12
>>>>>>> (XEN) IRQ120 -> 0:13
>>>>>>> (XEN) IRQ136 -> 0:14
>>>>>>> (XEN) IRQ144 -> 0:15
>>>>>>> (XEN) .................................... done.
>>>>>>> (XEN) Using local APIC timer interrupts.
>>>>>>> (XEN) calibrating APIC timer ...
>>>>>>> (XEN) ..... CPU clock speed is 2327.5697 MHz.
>>>>>>> (XEN) ..... host bus clock speed is 332.5098 MHz.
>>>>>>> (XEN) ..... bus_scale = 0x00015489
>>>>>>> (XEN) checking TSC synchronization across 8 CPUs:
passed.
>>>>>>> (XEN) Platform timer is 14.318MHz HPET
>>>>>>> (XEN) Brought up 8 CPUs
>>>>>>> (XEN) I/O virtualisation disabled
>>>>>>> (XEN) HPET: 3 timers in total, 0 timers will be
used for
>>>>>>> broadcast (XEN) ACPI sleep modes: S3 (XEN)
mcheck_poll: Machine
>>>>>>> check polling timer started. (XEN) *** LOADING
DOMAIN 0 ***
>>>>>>> (XEN)  Xen  kernel: 64-bit, lsb, compat32
>>>>>>> (XEN)  Dom0 kernel: 64-bit, lsb, paddr
0xffffffff80200000 ->
>>>>>>> 0xffffffff8074310c (XEN) PHYSICAL MEMORY
ARRANGEMENT:
>>>>>>> (XEN)  Dom0 alloc.:
> 0000000256000000->0000000258000000 (253952
>>>>>>> pages to be allocated) (XEN) VIRTUAL MEMORY
ARRANGEMENT:
>>>>>>> (XEN)  Loaded kernel:
ffffffff80200000->ffffffff8074310c
>>>>>>> (XEN)  Init. ramdisk:
ffffffff80744000->ffffffff80f63a00
>>>>>>> (XEN)  Phys-Mach map:
ffffffff80f64000->ffffffff81164000
>>>>>>> (XEN)  Start info:   
ffffffff81164000->ffffffff811644b4
>>>>>>> (XEN)  Page tables:  
ffffffff81165000->ffffffff81172000
>>>>>>> (XEN)  Boot stack:   
ffffffff81172000->ffffffff81173000
>>>>>>> (XEN)  TOTAL:        
ffffffff80000000->ffffffff81400000
>>>>>>> (XEN)  ENTRY ADDRESS: ffffffff80200000
>>>>>>> (XEN) Dom0 has maximum 1 VCPUs
>>>>>>> (XEN) Scrubbing Free
>>>>>>> RAM:
>>>>>>>
>>> ...............................................................
>>> .......do
>>>>> ne.
>>>>>>> (XEN) Xen trace buffers: disabled
>>>>>>> (XEN) Std. Loglevel: All
>>>>>>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors
and
>>>>>>> warnings) (XEN) Xen is relinquishing VGA console.
>>>>>>> (XEN) *** Serial input -> DOM0 (type
'CTRL-a' three times to
>>>>>>> switch input to Xen) (XEN) Freed 124kB init memory.
>>>>>>>
>>>>>>>
===========================================>>>>>>>
>>>>>>> [root@b52 ~]# xenpm get-cpuidle-states
>>>>>>> Max C-state: C7
>>>>>>>
>>>>>>> cpu id               : 0
>>>>>>> total C-states       : 0
>>>>>>> idle time(ms)        : 0
>>>>>>>
>>>>>>> cpu id               : 1
>>>>>>> total C-states       : 0
>>>>>>> idle time(ms)        : 0
>>>>>>>
>>>>>>> cpu id               : 2
>>>>>>> total C-states       : 0
>>>>>>> idle time(ms)        : 0
>>>>>>>
>>>>>>> cpu id               : 3
>>>>>>> total C-states       : 0
>>>>>>> idle time(ms)        : 0
>>>>>>>
>>>>>>> cpu id               : 4
>>>>>>> total C-states       : 0
>>>>>>> idle time(ms)        : 0
>>>>>>>
>>>>>>> cpu id               : 5
>>>>>>> total C-states       : 0
>>>>>>> idle time(ms)        : 0
>>>>>>>
>>>>>>> cpu id               : 6
>>>>>>> total C-states       : 0
>>>>>>> idle time(ms)        : 0
>>>>>>>
>>>>>>> cpu id               : 7
>>>>>>> total C-states       : 0
>>>>>>> idle time(ms)        : 0
>>>>>>>
>>>>>>> [root@b52 ~]# xenpm get-cpufreq-states
>>>>>>> [root@b52 ~]# xenpm get-cpufreq-para
>>>>>>> [CPU0] failed to get cpufreq parameter
>>>>>>> [CPU1] failed to get cpufreq parameter
>>>>>>> [CPU2] failed to get cpufreq parameter
>>>>>>> [CPU3] failed to get cpufreq parameter
>>>>>>> [CPU4] failed to get cpufreq parameter
>>>>>>> [CPU5] failed to get cpufreq parameter
>>>>>>> [CPU6] failed to get cpufreq parameter
>>>>>>> [CPU7] failed to get cpufreq parameter
>>>>>>>
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> Mike
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Xen-devel mailing list
>>>>>> Xen-devel@lists.xensource.com
>>>>>> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Mike Brady

2009-Jun-04 17:59 UTC

head link

RE: [Xen-devel] [Fwd: Problems with power management]

Is there a way for me to tell if the Centos kernel has those
modifications?  A kernel config option or something?

The xenpm wiki page shows an extract for xm dmesg, but there is nothing
like that in my xm dmesg output.  Is it possible that there is something
missing from the gitco Xen build?

Mike

On Thu, 2009-06-04 at 18:53 +0800, Wei, Gang wrote:> The dom0 kernel need to be modified to pass acpi info about C/P states to
Xen. Xen depends on dom0 to get those information.
> 
> Jimmy
> 
> Mike Brady wrote:
> > I have just tried that.  It has made no difference.
> >
> > May be the Centos kernel does not have something that is required.
> > What needs to be enabled in the Dom0 kernel for PM to work?
> >
> > On Thu, 2009-06-04 at 18:05 +0800, Wei, Gang wrote:
> >> Can you try with removing "dom0_max_vcpus=1" from the
grub
> > line? I suspect this is a dom0 kernel issue. The upstream
> > 2.6.18 xen-linux kernel works well as dom0 kernel with PM. I
> > am not sure about Centos 5.3 kernel.
> >>
> >> Jimmy
> >>
> >> Mike Brady wrote:
> >>> The BIOS has the following options, both of which are enabled:
> >>> - Intel Speed Step
> >>> - Deep C-State Support
> >>>
> >>> As reported by /proc/cpuinfo the cpu speed does vary using a
native
> >>> Linux kernel.
> >>>
> >>> Sorry but I am not in a position to do my own build at the
moment.
> >>> I may be able to try it next week.
> >>>
> >>> Thanks
> >>>
> >>> Mike
> >>>
> >>> On Thu, 2009-06-04 at 16:41 +0800, Wei, Gang wrote:
> >>>> Hi, Mike,
> >>>>
> >>>> Are there any BIOS options in your box related with
C-states
> >>> or P-states? These may be disabled.
> >>>>
> >>>> Or can you try the native Linux first to make sure you can
see the
> >>>> PM effect?
> >>>>
> >>>> Further, if you can rebuild Xen yourself, please turn on
the
> >>> C/P state debug flag ( e.g. uncomment/*#define DEBUG_PM_CX*/
> >>> in cpu_idle.c) , and repost the serial log for more detail
info.
> >>>>
> >>>> Jimmy
> >>>>
> >>>>> -----Original Message-----
> >>>>> From: Keir Fraser [mailto:keir.fraser@eu.citrix.com]
> >>>>> Sent: 2009年6月4日 15:47
> >>>>> To: mike.brady@devnull.net.nz; xen-devel
> >>>>> Cc: Wei, Gang
> >>>>> Subject: Re: [Xen-devel] [Fwd: Problems with power
management]
> >>>>>
> >>>>> Your best bet tool here is ''hg -v history
tools/misc/xenpm.c |
> >>>>> less'' and pick one of the developers of the
component. In this
> >>>>> case Wei Gang would be plausible (cc''ed).
> >>>>>
> >>>>> -- Keir
> >>>>>
> >>>>> On 04/06/2009 06:40, "Mike Brady"
> > <mike.brady@devnull.net.nz> wrote:
> >>>>>
> >>>>>> I posted this on the user list but it has been
suggested to me
> >>>>>> that it may pay to ask on the devel list as well
as I didn''t get
> >>>>>> any responses.
> >>>>>>
> >>>>>> Thanks
> >>>>>>
> >>>>>> Mike
> >>>>>>
> >>>>>> -------- Forwarded Message --------
> >>>>>>> From: Mike Brady
<mike.brady@devnull.net.nz>
> >>>>>>> Reply-To: mike.brady@devnull.net.nz
> >>>>>>> To: xen-users@lists.xensource.com
> > <xen-users@lists.xensource.com>
> >>>>>>> Subject: Problems with power management
> >>>>>>> Date: Sat, 30 May 2009 16:28:11 +1200
> >>>>>>>
> >>>>>>> I do not seem to be able to get any where with
the power
> >>>>>>> management functions. I have had a look at the
xenpm Wiki page,
> >>>>>>> but it hasn''t helped.  Its probably
something completely
> >>>>>>> obvious, but I can''t see it.
> >>>>>>>
> >>>>>>> I running Xen 3.4.0 on Centos 5.3 x86_64 using
the gitco RPMs on
> >>>>>>> an Intel S5000PSL motherboard with 2 x Xeon
5410s.  Dom0 is
> >>>>>>> running the latest Centos 5.3 kernel.
> >>>>>>>
> >>>>>>> My xm dmesg output is below followed by the
output that I get
> >>>>>>> from the xenpm get* commands, which
isn''t much.
> >>>>>>>
> >>>>>>>
===========================================> >>>>>>>
[root@b52 ~]# xm dmesg
> >>>>>>>  __  __            _____ _  _    ___
> >>>>>>>  \ \/ /___ _ __   |___ /| || |  / _ \
> >>>>>>>   \  // _ \ ''_ \    |_ \| || |_| | |
|
> >>>>>>>   /  \  __/ | | |  ___) |__   _| |_| |
> >>>>>>>  /_/\_\___|_| |_| |____(_) |_|(_)___/
> >>>>>>>
> >>>>>>> (XEN) Xen version 3.4.0 (root@gitco.tld) (gcc
version 4.1.2
> >>>>>>> 20080704 (Red Hat 4.1.2-44)) Wed May 27
21:53:09 CEST 2009
> >>>>>>> (XEN) Latest ChangeSet: unavailable
> >>>>>>> (XEN) Command line: cpufreq=xen cpuidle
dom0_max_vcpus=1
> >>>>>>> dom0_vcpus_pin=true dom0_mem=1024M
> >>> apic_verbosity=verbose loglvl=all
> >>>>>>> (XEN) Video information:
> >>>>>>> (XEN)  VGA is text mode 80x25, font 8x16
> >>>>>>> (XEN)  VBE/DDC methods: none; EDID transfer
time: 2 seconds
> >>>>>>> (XEN)  EDID info not retrieved because no DDC
retrieval method
> >>>>>>> detected (XEN) Disc information: (XEN)  Found
2 MBR signatures
> >>>>>>> (XEN)  Found 2 EDD information structures
> >>>>>>> (XEN) Xen-e820 RAM map:
> >>>>>>> (XEN)  0000000000000000 - 000000000009f400
(usable)
> >>>>>>> (XEN)  000000000009f400 - 0000000000100000
(reserved)
> >>>>>>> (XEN)  0000000000100000 - 000000009e2e1000
(usable)
> >>>>>>> (XEN)  000000009e2e1000 - 000000009e3a3000
(ACPI NVS)
> >>>>>>> (XEN)  000000009e3a3000 - 000000009fa32000
(usable)
> >>>>>>> (XEN)  000000009fa32000 - 000000009fa9a000
(reserved)
> >>>>>>> (XEN)  000000009fa9a000 - 000000009faac000
(usable)
> >>>>>>> (XEN)  000000009faac000 - 000000009fb1a000
(ACPI NVS)
> >>>>>>> (XEN)  000000009fb1a000 - 000000009fb26000
(usable)
> >>>>>>> (XEN)  000000009fb26000 - 000000009fb3a000
(ACPI data)
> >>>>>>> (XEN)  000000009fb3a000 - 000000009fc00000
(usable)
> >>>>>>> (XEN)  000000009fc00000 - 00000000b0000000
(reserved)
> >>>>>>> (XEN)  00000000ffc00000 - 00000000ffc0c000
(reserved)
> >>>>>>> (XEN)  0000000100000000 - 0000000260000000
(usable)
> >>>>>>> (XEN) System RAM: 8185MB (8382412kB)
> >>>>>>> (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
> >>>>>>> (XEN) ACPI: XSDT 9FB39120, 0084 (r1 INTEL 
S5000PSL
> >    0 INTL
> >>>>>>> 1000013) (XEN) ACPI: FACP 9FB37000, 00F4 (r3
INTEL  S5000PSL
> >>>>>>> 0 INTL 1000013) (XEN) ACPI: DSDT 9FB30000,
57F6 (r2 INTEL
> >>>>>>> S5000PSL        1 INTL 1000013) (XEN) ACPI:
FACS 9FAAC000, 0040
> >>>>>>> (XEN) ACPI: APIC 9FB36000, 00C8 (r1 INTEL 
S5000PSL
> >    0 INTL
> >>>>>>> 1000013) (XEN) ACPI: SPCR 9FB2F000, 0050 (r1
INTEL  S5000PSL
> >>>>>>> 0 INTL 1000013) (XEN) ACPI: HPET 9FB2E000,
0038 (r1 INTEL
> >>>>>>> S5000PSL        1 INTL 1000013) (XEN) ACPI:
MCFG 9FB2D000, 003C
> >>>>>>> (r1 INTEL  S5000PSL        1 INTL 1000013)
(XEN) ACPI: SSDT
> >>>>>>> 9FB2C000, 0A14 (r2 INTEL  EIST         4000
INTL 1000013) (XEN)
> >>>>>>> ACPI: SSDT 9FB2B000, 0193 (r2 INTEL  IPMI     
4000 INTL
> >>>>>>> 1000013) (XEN) ACPI: SSDT 9FB2A000, 00CE (r2
INTEL  CST
> >>>>>>> 4000 INTL 1000013) (XEN) ACPI: HEST 9FB29000,
00A8 (r1 INTEL
> >>>>>>> S5000PSL        1 INTL 1) (XEN) ACPI: BERT
9FB28000, 0030 (r1
> >>>>>>> INTEL  S5000PSL        1 INTL 1) (XEN) ACPI:
ERST 9FB27000, 0230
> >>>>>>> (r1 INTEL  S5000PSL        1 INTL 1) (XEN)
ACPI: EINJ 9FB26000,
> >>>>>>> 0130 (r1 INTEL  S5000PSL        1 INTL 1)
(XEN) NUMA turned off
> >>>>>>> (XEN) Faking a node at
0000000000000000-0000000260000000 (XEN)
> >>>>>>> Domain heap initialised (XEN) found SMP
MP-table at 000fd190
> >>>>>>> (XEN) DMI 2.5 present. (XEN) Using APIC driver
default
> >>>>>>> (XEN) ACPI: PM-Timer IO Port: 0x408
> >>>>>>> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0],
pm1x_evt[400,0]
> >>>>>>> (XEN) ACPI:                 
wakeup_vec[9faac00c], vec_size[20]
> >>>>>>> (XEN) ACPI: Local APIC address 0xfee00000
> >>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x00]
lapic_id[0x00] enabled)
> >>>>>>> (XEN) Processor #0 7:7 APIC version 20
> >>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x02] enabled)
> >>>>>>> (XEN) Processor #2 7:7 APIC version 20
> >>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x02]
lapic_id[0x04] enabled)
> >>>>>>> (XEN) Processor #4 7:7 APIC version 20
> >>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x03]
lapic_id[0x06] enabled)
> >>>>>>> (XEN) Processor #6 7:7 APIC version 20
> >>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x04]
lapic_id[0x01] enabled)
> >>>>>>> (XEN) Processor #1 7:7 APIC version 20
> >>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x05]
lapic_id[0x03] enabled)
> >>>>>>> (XEN) Processor #3 7:7 APIC version 20
> >>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x06]
lapic_id[0x05] enabled)
> >>>>>>> (XEN) Processor #5 7:7 APIC version 20
> >>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x07]
lapic_id[0x07] enabled)
> >>>>>>> (XEN) Processor #7 7:7 APIC version 20
> >>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high
level lint[0x1])
> >>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high
level lint[0x1])
> >>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high
level lint[0x1])
> >>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high
level lint[0x1])
> >>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high
level lint[0x1])
> >>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high
level lint[0x1])
> >>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high
level lint[0x1])
> >>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high
level lint[0x1])
> >>>>>>> (XEN) ACPI: IOAPIC (id[0x08]
address[0xfec00000] gsi_base[0])
> >>>>>>> (XEN) IOAPIC[0]: apic_id 8, version 32,
address 0xfec00000, GSI
> >>>>>>> 0-23 (XEN) ACPI: IOAPIC (id[0x09]
address[0xfec80000]
> >>>>>>> gsi_base[24]) (XEN) IOAPIC[1]: apic_id 9,
version 32, address
> >>>>>>> 0xfec80000, GSI 24-47 (XEN) ACPI: INT_SRC_OVR
(bus 0 bus_irq 0
> >>>>>>> global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR
(bus 0 bus_irq 9
> >>>>>>> global_irq 9 high level) (XEN) ACPI: IRQ0 used
by override.
> >>>>>>> (XEN) ACPI: IRQ2 used by override.
> >>>>>>> (XEN) ACPI: IRQ9 used by override.
> >>>>>>> (XEN) Enabling APIC mode:  Flat.  Using 2 I/O
APICs
> >>>>>>> (XEN) ACPI: HPET id: 0x8086a201 base:
0xfed00000
> >>>>>>> (XEN) Using ACPI (MADT) for SMP configuration
information
> >>>>>>> (XEN) mapped APIC to ffff828bffffe000
(fee00000)
> >>>>>>> (XEN) mapped IOAPIC to ffff828bffffd000
(fec00000)
> >>>>>>> (XEN) mapped IOAPIC to ffff828bffffc000
(fec80000)
> >>>>>>> (XEN) Using scheduler: SMP Credit Scheduler
(credit) (XEN)
> >>>>>>> Initializing CPU#0 (XEN) Detected 2327.591 MHz
processor.
> >>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>>>> (XEN) CPU: L2 cache: 6144K
> >>>>>>> (XEN) CPU: Physical Processor ID: 0
> >>>>>>> (XEN) CPU: Processor Core ID: 0
> >>>>>>> (XEN) VMX: Supported advanced features:
> >>>>>>> (XEN)  - APIC MMIO access virtualisation
> >>>>>>> (XEN)  - APIC TPR shadow
> >>>>>>> (XEN)  - Virtual NMI
> >>>>>>> (XEN)  - MSR direct-access bitmap
> >>>>>>> (XEN) HVM: VMX enabled
> >>>>>>> (XEN) Intel machine check reporting enabled on
CPU#0.
> >>>>>>> (XEN) CPU0: Thermal monitoring enabled (TM2)
> >>>>>>> (XEN) CMCI: CPU0 has no CMCI support
> >>>>>>> (XEN) CPU0: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
> >>>>>>> stepping 06 (XEN) enabled ExtINT on CPU#0
(XEN) Booting
> >>>>>>> processor 1/2 eip 8c000 (XEN) Initializing
CPU#1
> >>>>>>> (XEN) masked ExtINT on CPU#1
> >>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>>>> (XEN) CPU: L2 cache: 6144K
> >>>>>>> (XEN) CPU: Physical Processor ID: 0
> >>>>>>> (XEN) CPU: Processor Core ID: 2
> >>>>>>> (XEN) Intel machine check reporting enabled on
CPU#1.
> >>>>>>> (XEN) CPU1: Thermal monitoring enabled (TM2)
> >>>>>>> (XEN) CMCI: CPU1 has no CMCI support
> >>>>>>> (XEN) CPU1: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
> >>>>>>> stepping 06 (XEN) Booting processor 2/4 eip
8c000
> >>>>>>> (XEN) Initializing CPU#2
> >>>>>>> (XEN) masked ExtINT on CPU#2
> >>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>>>> (XEN) CPU: L2 cache: 6144K
> >>>>>>> (XEN) CPU: Physical Processor ID: 1
> >>>>>>> (XEN) CPU: Processor Core ID: 0
> >>>>>>> (XEN) Intel machine check reporting enabled on
CPU#2.
> >>>>>>> (XEN) CPU2: Thermal monitoring enabled (TM2)
> >>>>>>> (XEN) CMCI: CPU2 has no CMCI support
> >>>>>>> (XEN) CPU2: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
> >>>>>>> stepping 06 (XEN) Booting processor 3/6 eip
8c000
> >>>>>>> (XEN) Initializing CPU#3
> >>>>>>> (XEN) masked ExtINT on CPU#3
> >>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>>>> (XEN) CPU: L2 cache: 6144K
> >>>>>>> (XEN) CPU: Physical Processor ID: 1
> >>>>>>> (XEN) CPU: Processor Core ID: 2
> >>>>>>> (XEN) Intel machine check reporting enabled on
CPU#3.
> >>>>>>> (XEN) CPU3: Thermal monitoring enabled (TM2)
> >>>>>>> (XEN) CMCI: CPU3 has no CMCI support
> >>>>>>> (XEN) CPU3: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
> >>>>>>> stepping 06 (XEN) Booting processor 4/1 eip
8c000
> >>>>>>> (XEN) Initializing CPU#4
> >>>>>>> (XEN) masked ExtINT on CPU#4
> >>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>>>> (XEN) CPU: L2 cache: 6144K
> >>>>>>> (XEN) CPU: Physical Processor ID: 0
> >>>>>>> (XEN) CPU: Processor Core ID: 1
> >>>>>>> (XEN) Intel machine check reporting enabled on
CPU#4.
> >>>>>>> (XEN) CPU4: Thermal monitoring enabled (TM2)
> >>>>>>> (XEN) CMCI: CPU4 has no CMCI support
> >>>>>>> (XEN) CPU4: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
> >>>>>>> stepping 06 (XEN) Booting processor 5/3 eip
8c000
> >>>>>>> (XEN) Initializing CPU#5
> >>>>>>> (XEN) masked ExtINT on CPU#5
> >>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>>>> (XEN) CPU: L2 cache: 6144K
> >>>>>>> (XEN) CPU: Physical Processor ID: 0
> >>>>>>> (XEN) CPU: Processor Core ID: 3
> >>>>>>> (XEN) Intel machine check reporting enabled on
CPU#5.
> >>>>>>> (XEN) CPU5: Thermal monitoring enabled (TM2)
> >>>>>>> (XEN) CMCI: CPU5 has no CMCI support
> >>>>>>> (XEN) CPU5: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
> >>>>>>> stepping 06 (XEN) Booting processor 6/5 eip
8c000
> >>>>>>> (XEN) Initializing CPU#6
> >>>>>>> (XEN) masked ExtINT on CPU#6
> >>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>>>> (XEN) CPU: L2 cache: 6144K
> >>>>>>> (XEN) CPU: Physical Processor ID: 1
> >>>>>>> (XEN) CPU: Processor Core ID: 1
> >>>>>>> (XEN) Intel machine check reporting enabled on
CPU#6.
> >>>>>>> (XEN) CPU6: Thermal monitoring enabled (TM2)
> >>>>>>> (XEN) CMCI: CPU6 has no CMCI support
> >>>>>>> (XEN) CPU6: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
> >>>>>>> stepping 06 (XEN) Booting processor 7/7 eip
8c000
> >>>>>>> (XEN) Initializing CPU#7
> >>>>>>> (XEN) masked ExtINT on CPU#7
> >>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> >>>>>>> (XEN) CPU: L2 cache: 6144K
> >>>>>>> (XEN) CPU: Physical Processor ID: 1
> >>>>>>> (XEN) CPU: Processor Core ID: 3
> >>>>>>> (XEN) Intel machine check reporting enabled on
CPU#7.
> >>>>>>> (XEN) CPU7: Thermal monitoring enabled (TM2)
> >>>>>>> (XEN) CMCI: CPU7 has no CMCI support
> >>>>>>> (XEN) CPU7: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
> >>>>>>> stepping 06 (XEN) Total of 8 processors
activated.
> >>>>>>> (XEN) ENABLING IO-APIC IRQs
> >>>>>>> (XEN)  -> Using new ACK method
> >>>>>>> (XEN) init IO_APIC IRQs
> >>>>>>> (XEN)  IO-APIC (apicid-pin) 8-0, 8-16, 8-17,
8-18, 8-19, 8-20,
> >>>>>>> 8-21, 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4,
9-5, 9-6, 9-7, 9-8,
> >>>>>>> 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 9-16,
9-17, 9-18, 9-19,
> >>>>>>> 9-20, 9-21, 9-22, 9-23 not connected. (XEN)
..TIMER: vector=0xF0
> >>>>>>> apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) number
of MP IRQ sources:
> >>>>>>> 15. (XEN) number of IO-APIC #8 registers: 24.
> >>>>>>> (XEN) number of IO-APIC #9 registers: 24.
> >>>>>>> (XEN) testing the IO
APIC.......................
> >>>>>>> (XEN) IO APIC #8......
> >>>>>>> (XEN) .... register #00: 08000000
> >>>>>>> (XEN) .......    : physical APIC id: 08
> >>>>>>> (XEN) .......    : Delivery Type: 0
> >>>>>>> (XEN) .......    : LTS          : 0
> >>>>>>> (XEN) .... register #01: 00170020
> >>>>>>> (XEN) .......     : max redirection entries:
0017
> >>>>>>> (XEN) .......     : PRQ implemented: 0
> >>>>>>> (XEN) .......     : IO APIC version: 0020
> >>>>>>> (XEN) .... IRQ redirection table:
> >>>>>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest
Deli Vect:
> >>>>>>> (XEN)  00 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  01 001 01  0    0    0   0   0    1   
1    20
> >>>>>>> (XEN)  02 001 01  0    0    0   0   0    1   
1    F0
> >>>>>>> (XEN)  03 001 01  0    0    0   0   0    1   
1    28
> >>>>>>> (XEN)  04 001 01  0    0    0   0   0    1   
1    30
> >>>>>>> (XEN)  05 001 01  0    0    0   0   0    1   
1    38
> >>>>>>> (XEN)  06 001 01  0    0    0   0   0    1   
1    40
> >>>>>>> (XEN)  07 001 01  0    0    0   0   0    1   
1    48
> >>>>>>> (XEN)  08 001 01  0    0    0   0   0    1   
1    50
> >>>>>>> (XEN)  09 001 01  1    1    0   0   0    1   
1    58
> >>>>>>> (XEN)  0a 001 01  0    0    0   0   0    1   
1    60
> >>>>>>> (XEN)  0b 001 01  0    0    0   0   0    1   
1    68
> >>>>>>> (XEN)  0c 001 01  0    0    0   0   0    1   
1    70
> >>>>>>> (XEN)  0d 001 01  0    0    0   0   0    1   
1    78
> >>>>>>> (XEN)  0e 001 01  0    0    0   0   0    1   
1    88
> >>>>>>> (XEN)  0f 001 01  0    0    0   0   0    1   
1    90
> >>>>>>> (XEN)  10 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  11 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  12 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  13 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  14 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  15 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  16 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  17 000 00  1    0    0   0   0    0   
0    00 (XEN) IO
> >>>>>>> APIC #9...... (XEN) .... register #00:
09000000
> >>>>>>> (XEN) .......    : physical APIC id: 09
> >>>>>>> (XEN) .......    : Delivery Type: 0
> >>>>>>> (XEN) .......    : LTS          : 0
> >>>>>>> (XEN) .... register #01: 00178020
> >>>>>>> (XEN) .......     : max redirection entries:
0017
> >>>>>>> (XEN) .......     : PRQ implemented: 1
> >>>>>>> (XEN) .......     : IO APIC version: 0020
> >>>>>>> (XEN) .... register #02: 09000000
> >>>>>>> (XEN) .......     : arbitration: 09
> >>>>>>> (XEN) .... register #03: 00000001
> >>>>>>> (XEN) .......     : Boot DT    : 1
> >>>>>>> (XEN) .... IRQ redirection table:
> >>>>>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest
Deli Vect:
> >>>>>>> (XEN)  00 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  01 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  02 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  03 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  04 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  05 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  06 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  07 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  08 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  09 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  0a 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  0b 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  0c 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  0d 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  0e 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  0f 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  10 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  11 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  12 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  13 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  14 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  15 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  16 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN)  17 000 00  1    0    0   0   0    0   
0    00
> >>>>>>> (XEN) Using vector-based indexing
> >>>>>>> (XEN) IRQ to pin mappings:
> >>>>>>> (XEN) IRQ240 -> 0:2
> >>>>>>> (XEN) IRQ32 -> 0:1
> >>>>>>> (XEN) IRQ40 -> 0:3
> >>>>>>> (XEN) IRQ48 -> 0:4
> >>>>>>> (XEN) IRQ56 -> 0:5
> >>>>>>> (XEN) IRQ64 -> 0:6
> >>>>>>> (XEN) IRQ72 -> 0:7
> >>>>>>> (XEN) IRQ80 -> 0:8
> >>>>>>> (XEN) IRQ88 -> 0:9
> >>>>>>> (XEN) IRQ96 -> 0:10
> >>>>>>> (XEN) IRQ104 -> 0:11
> >>>>>>> (XEN) IRQ112 -> 0:12
> >>>>>>> (XEN) IRQ120 -> 0:13
> >>>>>>> (XEN) IRQ136 -> 0:14
> >>>>>>> (XEN) IRQ144 -> 0:15
> >>>>>>> (XEN) ....................................
done.
> >>>>>>> (XEN) Using local APIC timer interrupts.
> >>>>>>> (XEN) calibrating APIC timer ...
> >>>>>>> (XEN) ..... CPU clock speed is 2327.5697 MHz.
> >>>>>>> (XEN) ..... host bus clock speed is 332.5098
MHz.
> >>>>>>> (XEN) ..... bus_scale = 0x00015489
> >>>>>>> (XEN) checking TSC synchronization across 8
CPUs: passed.
> >>>>>>> (XEN) Platform timer is 14.318MHz HPET
> >>>>>>> (XEN) Brought up 8 CPUs
> >>>>>>> (XEN) I/O virtualisation disabled
> >>>>>>> (XEN) HPET: 3 timers in total, 0 timers will
be used for
> >>>>>>> broadcast (XEN) ACPI sleep modes: S3 (XEN)
mcheck_poll: Machine
> >>>>>>> check polling timer started. (XEN) *** LOADING
DOMAIN 0 ***
> >>>>>>> (XEN)  Xen  kernel: 64-bit, lsb, compat32
> >>>>>>> (XEN)  Dom0 kernel: 64-bit, lsb, paddr
0xffffffff80200000 ->
> >>>>>>> 0xffffffff8074310c (XEN) PHYSICAL MEMORY
ARRANGEMENT:
> >>>>>>> (XEN)  Dom0 alloc.:
> > 0000000256000000->0000000258000000 (253952
> >>>>>>> pages to be allocated) (XEN) VIRTUAL MEMORY
ARRANGEMENT:
> >>>>>>> (XEN)  Loaded kernel:
ffffffff80200000->ffffffff8074310c
> >>>>>>> (XEN)  Init. ramdisk:
ffffffff80744000->ffffffff80f63a00
> >>>>>>> (XEN)  Phys-Mach map:
ffffffff80f64000->ffffffff81164000
> >>>>>>> (XEN)  Start info:   
ffffffff81164000->ffffffff811644b4
> >>>>>>> (XEN)  Page tables:  
ffffffff81165000->ffffffff81172000
> >>>>>>> (XEN)  Boot stack:   
ffffffff81172000->ffffffff81173000
> >>>>>>> (XEN)  TOTAL:        
ffffffff80000000->ffffffff81400000
> >>>>>>> (XEN)  ENTRY ADDRESS: ffffffff80200000
> >>>>>>> (XEN) Dom0 has maximum 1 VCPUs
> >>>>>>> (XEN) Scrubbing Free
> >>>>>>> RAM:
> >>>>>>>
> >>>
...............................................................
> >>> .......do
> >>>>> ne.
> >>>>>>> (XEN) Xen trace buffers: disabled
> >>>>>>> (XEN) Std. Loglevel: All
> >>>>>>> (XEN) Guest Loglevel: Nothing (Rate-limited:
Errors and
> >>>>>>> warnings) (XEN) Xen is relinquishing VGA
console.
> >>>>>>> (XEN) *** Serial input -> DOM0 (type
''CTRL-a'' three times to
> >>>>>>> switch input to Xen) (XEN) Freed 124kB init
memory.
> >>>>>>>
> >>>>>>>
===========================================> >>>>>>>
> >>>>>>> [root@b52 ~]# xenpm get-cpuidle-states
> >>>>>>> Max C-state: C7
> >>>>>>>
> >>>>>>> cpu id               : 0
> >>>>>>> total C-states       : 0
> >>>>>>> idle time(ms)        : 0
> >>>>>>>
> >>>>>>> cpu id               : 1
> >>>>>>> total C-states       : 0
> >>>>>>> idle time(ms)        : 0
> >>>>>>>
> >>>>>>> cpu id               : 2
> >>>>>>> total C-states       : 0
> >>>>>>> idle time(ms)        : 0
> >>>>>>>
> >>>>>>> cpu id               : 3
> >>>>>>> total C-states       : 0
> >>>>>>> idle time(ms)        : 0
> >>>>>>>
> >>>>>>> cpu id               : 4
> >>>>>>> total C-states       : 0
> >>>>>>> idle time(ms)        : 0
> >>>>>>>
> >>>>>>> cpu id               : 5
> >>>>>>> total C-states       : 0
> >>>>>>> idle time(ms)        : 0
> >>>>>>>
> >>>>>>> cpu id               : 6
> >>>>>>> total C-states       : 0
> >>>>>>> idle time(ms)        : 0
> >>>>>>>
> >>>>>>> cpu id               : 7
> >>>>>>> total C-states       : 0
> >>>>>>> idle time(ms)        : 0
> >>>>>>>
> >>>>>>> [root@b52 ~]# xenpm get-cpufreq-states
> >>>>>>> [root@b52 ~]# xenpm get-cpufreq-para
> >>>>>>> [CPU0] failed to get cpufreq parameter
> >>>>>>> [CPU1] failed to get cpufreq parameter
> >>>>>>> [CPU2] failed to get cpufreq parameter
> >>>>>>> [CPU3] failed to get cpufreq parameter
> >>>>>>> [CPU4] failed to get cpufreq parameter
> >>>>>>> [CPU5] failed to get cpufreq parameter
> >>>>>>> [CPU6] failed to get cpufreq parameter
> >>>>>>> [CPU7] failed to get cpufreq parameter
> >>>>>>>
> >>>>>>>
> >>>>>>> Thanks
> >>>>>>>
> >>>>>>> Mike
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Xen-devel mailing list
> >>>>>> Xen-devel@lists.xensource.com
> >>>>>> http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Wei, Gang

2009-Jun-05 01:17 UTC

head link

RE: [Xen-devel] [Fwd: Problems with power management]

The current Centos 5.3 should not be fully compatible with Xen3.4 features,
including XenPM. Centos is derived from RHEL, and RHEL 5.3 doesn't support
xen3.4 yet.

Jimmy

Mike Brady wrote:> Is there a way for me to tell if the Centos kernel has those
> modifications?  A kernel config option or something?
>
> The xenpm wiki page shows an extract for xm dmesg, but there is
> nothing like that in my xm dmesg output.  Is it possible that there
> is something missing from the gitco Xen build?
>
> Mike
>
> On Thu, 2009-06-04 at 18:53 +0800, Wei, Gang wrote:
>> The dom0 kernel need to be modified to pass acpi info about
> C/P states to Xen. Xen depends on dom0 to get those information.
>>
>> Jimmy
>>
>> Mike Brady wrote:
>>> I have just tried that.  It has made no difference.
>>>
>>> May be the Centos kernel does not have something that is required.
>>> What needs to be enabled in the Dom0 kernel for PM to work?
>>>
>>> On Thu, 2009-06-04 at 18:05 +0800, Wei, Gang wrote:
>>>> Can you try with removing "dom0_max_vcpus=1" from the
grub
>>> line? I suspect this is a dom0 kernel issue. The upstream
>>> 2.6.18 xen-linux kernel works well as dom0 kernel with PM. I
>>> am not sure about Centos 5.3 kernel.
>>>>
>>>> Jimmy
>>>>
>>>> Mike Brady wrote:
>>>>> The BIOS has the following options, both of which are
enabled:
>>>>> - Intel Speed Step
>>>>> - Deep C-State Support
>>>>>
>>>>> As reported by /proc/cpuinfo the cpu speed does vary using
a
>>>>> native Linux kernel.
>>>>>
>>>>> Sorry but I am not in a position to do my own build at the
moment.
>>>>> I may be able to try it next week.
>>>>>
>>>>> Thanks
>>>>>
>>>>> Mike
>>>>>
>>>>> On Thu, 2009-06-04 at 16:41 +0800, Wei, Gang wrote:
>>>>>> Hi, Mike,
>>>>>>
>>>>>> Are there any BIOS options in your box related with
C-states
>>>>> or P-states? These may be disabled.
>>>>>>
>>>>>> Or can you try the native Linux first to make sure you
can see
>>>>>> the PM effect?
>>>>>>
>>>>>> Further, if you can rebuild Xen yourself, please turn
on the
>>>>> C/P state debug flag ( e.g. uncomment/*#define
DEBUG_PM_CX*/
>>>>> in cpu_idle.c) , and repost the serial log for more detail
info.
>>>>>>
>>>>>> Jimmy
>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Keir Fraser
[mailto:keir.fraser@eu.citrix.com]
>>>>>>> Sent: 2009年6月4日 15:47
>>>>>>> To: mike.brady@devnull.net.nz; xen-devel
>>>>>>> Cc: Wei, Gang
>>>>>>> Subject: Re: [Xen-devel] [Fwd: Problems with power
management]
>>>>>>>
>>>>>>> Your best bet tool here is 'hg -v history
tools/misc/xenpm.c |
>>>>>>> less' and pick one of the developers of the
component. In this
>>>>>>> case Wei Gang would be plausible (cc'ed).
>>>>>>>
>>>>>>> -- Keir
>>>>>>>
>>>>>>> On 04/06/2009 06:40, "Mike Brady"
>>> <mike.brady@devnull.net.nz> wrote:
>>>>>>>
>>>>>>>> I posted this on the user list but it has been
suggested to me
>>>>>>>> that it may pay to ask on the devel list as
well as I didn't
>>>>>>>> get any responses.
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>>
>>>>>>>> Mike
>>>>>>>>
>>>>>>>> -------- Forwarded Message --------
>>>>>>>>> From: Mike Brady
<mike.brady@devnull.net.nz>
>>>>>>>>> Reply-To: mike.brady@devnull.net.nz
>>>>>>>>> To: xen-users@lists.xensource.com
>>> <xen-users@lists.xensource.com>
>>>>>>>>> Subject: Problems with power management
>>>>>>>>> Date: Sat, 30 May 2009 16:28:11 +1200
>>>>>>>>>
>>>>>>>>> I do not seem to be able to get any where
with the power
>>>>>>>>> management functions. I have had a look at
the xenpm Wiki
>>>>>>>>> page, but it hasn't helped.  Its
probably something
>>>>>>>>> completely obvious, but I can't see it.
>>>>>>>>>
>>>>>>>>> I running Xen 3.4.0 on Centos 5.3 x86_64
using the gitco RPMs
>>>>>>>>> on an Intel S5000PSL motherboard with 2 x
Xeon 5410s.  Dom0 is
>>>>>>>>> running the latest Centos 5.3 kernel.
>>>>>>>>>
>>>>>>>>> My xm dmesg output is below followed by the
output that I get
>>>>>>>>> from the xenpm get* commands, which
isn't much.
>>>>>>>>>
>>>>>>>>>
===========================================>>>>>>>>>
[root@b52 ~]# xm dmesg
>>>>>>>>>  __  __            _____ _  _    ___
>>>>>>>>>  \ \/ /___ _ __   |___ /| || |  / _ \
>>>>>>>>>   \  // _ \ '_ \    |_ \| || |_| | | |
>>>>>>>>>   /  \  __/ | | |  ___) |__   _| |_| |
>>>>>>>>>  /_/\_\___|_| |_| |____(_) |_|(_)___/
>>>>>>>>>
>>>>>>>>> (XEN) Xen version 3.4.0 (root@gitco.tld)
(gcc version 4.1.2
>>>>>>>>> 20080704 (Red Hat 4.1.2-44)) Wed May 27
21:53:09 CEST 2009
>>>>>>>>> (XEN) Latest ChangeSet: unavailable
>>>>>>>>> (XEN) Command line: cpufreq=xen cpuidle
dom0_max_vcpus=1
>>>>>>>>> dom0_vcpus_pin=true dom0_mem=1024M
>>>>> apic_verbosity=verbose loglvl=all
>>>>>>>>> (XEN) Video information:
>>>>>>>>> (XEN)  VGA is text mode 80x25, font 8x16
>>>>>>>>> (XEN)  VBE/DDC methods: none; EDID transfer
time: 2 seconds
>>>>>>>>> (XEN)  EDID info not retrieved because no
DDC retrieval method
>>>>>>>>> detected (XEN) Disc information: (XEN) 
Found 2 MBR signatures
>>>>>>>>> (XEN)  Found 2 EDD information structures
>>>>>>>>> (XEN) Xen-e820 RAM map:
>>>>>>>>> (XEN)  0000000000000000 - 000000000009f400
(usable)
>>>>>>>>> (XEN)  000000000009f400 - 0000000000100000
(reserved)
>>>>>>>>> (XEN)  0000000000100000 - 000000009e2e1000
(usable)
>>>>>>>>> (XEN)  000000009e2e1000 - 000000009e3a3000
(ACPI NVS)
>>>>>>>>> (XEN)  000000009e3a3000 - 000000009fa32000
(usable)
>>>>>>>>> (XEN)  000000009fa32000 - 000000009fa9a000
(reserved)
>>>>>>>>> (XEN)  000000009fa9a000 - 000000009faac000
(usable)
>>>>>>>>> (XEN)  000000009faac000 - 000000009fb1a000
(ACPI NVS)
>>>>>>>>> (XEN)  000000009fb1a000 - 000000009fb26000
(usable)
>>>>>>>>> (XEN)  000000009fb26000 - 000000009fb3a000
(ACPI data)
>>>>>>>>> (XEN)  000000009fb3a000 - 000000009fc00000
(usable)
>>>>>>>>> (XEN)  000000009fc00000 - 00000000b0000000
(reserved)
>>>>>>>>> (XEN)  00000000ffc00000 - 00000000ffc0c000
(reserved)
>>>>>>>>> (XEN)  0000000100000000 - 0000000260000000
(usable)
>>>>>>>>> (XEN) System RAM: 8185MB (8382412kB)
>>>>>>>>> (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
>>>>>>>>> (XEN) ACPI: XSDT 9FB39120, 0084 (r1 INTEL 
S5000PSL
>>>    0 INTL
>>>>>>>>> 1000013) (XEN) ACPI: FACP 9FB37000, 00F4
(r3 INTEL  S5000PSL
>>>>>>>>> 0 INTL 1000013) (XEN) ACPI: DSDT 9FB30000,
57F6 (r2 INTEL
>>>>>>>>> S5000PSL        1 INTL 1000013) (XEN) ACPI:
FACS 9FAAC000,
>>>>>>>>> 0040 (XEN) ACPI: APIC 9FB36000, 00C8 (r1
INTEL  S5000PSL
>>>    0 INTL
>>>>>>>>> 1000013) (XEN) ACPI: SPCR 9FB2F000, 0050
(r1 INTEL  S5000PSL
>>>>>>>>> 0 INTL 1000013) (XEN) ACPI: HPET 9FB2E000,
0038 (r1 INTEL
>>>>>>>>> S5000PSL        1 INTL 1000013) (XEN) ACPI:
MCFG 9FB2D000,
>>>>>>>>> 003C (r1 INTEL  S5000PSL        1 INTL
1000013) (XEN) ACPI:
>>>>>>>>> SSDT 9FB2C000, 0A14 (r2 INTEL  EIST        
4000 INTL
>>>>>>>>> 1000013) (XEN) ACPI: SSDT 9FB2B000, 0193
(r2 INTEL  IPMI
>>>>>>>>> 4000 INTL 1000013) (XEN) ACPI: SSDT
9FB2A000, 00CE (r2 INTEL
>>>>>>>>> CST 4000 INTL 1000013) (XEN) ACPI: HEST
9FB29000, 00A8 (r1
>>>>>>>>> INTEL S5000PSL        1 INTL 1) (XEN) ACPI:
BERT 9FB28000,
>>>>>>>>> 0030 (r1 INTEL  S5000PSL        1 INTL 1)
(XEN) ACPI: ERST
>>>>>>>>> 9FB27000, 0230 (r1 INTEL  S5000PSL        1
INTL 1) (XEN)
>>>>>>>>> ACPI: EINJ 9FB26000, 0130 (r1 INTEL 
S5000PSL        1 INTL
>>>>>>>>> 1) (XEN) NUMA turned off (XEN) Faking a
node at
> 0000000000000000-0000000260000000 (XEN)
>>>>>>>>> Domain heap initialised (XEN) found SMP
MP-table at 000fd190
>>>>>>>>> (XEN) DMI 2.5 present. (XEN) Using APIC
driver default
>>>>>>>>> (XEN) ACPI: PM-Timer IO Port: 0x408
>>>>>>>>> (XEN) ACPI: ACPI SLEEP INFO:
pm1x_cnt[404,0], pm1x_evt[400,0]
>>>>>>>>> (XEN) ACPI:                 
wakeup_vec[9faac00c],
>>>>>>>>> vec_size[20] (XEN) ACPI: Local APIC address
0xfee00000
>>>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x00]
lapic_id[0x00] enabled)
>>>>>>>>> (XEN) Processor #0 7:7 APIC version 20
>>>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x02] enabled)
>>>>>>>>> (XEN) Processor #2 7:7 APIC version 20
>>>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x02]
lapic_id[0x04] enabled)
>>>>>>>>> (XEN) Processor #4 7:7 APIC version 20
>>>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x03]
lapic_id[0x06] enabled)
>>>>>>>>> (XEN) Processor #6 7:7 APIC version 20
>>>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x04]
lapic_id[0x01] enabled)
>>>>>>>>> (XEN) Processor #1 7:7 APIC version 20
>>>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x05]
lapic_id[0x03] enabled)
>>>>>>>>> (XEN) Processor #3 7:7 APIC version 20
>>>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x06]
lapic_id[0x05] enabled)
>>>>>>>>> (XEN) Processor #5 7:7 APIC version 20
>>>>>>>>> (XEN) ACPI: LAPIC (acpi_id[0x07]
lapic_id[0x07] enabled)
>>>>>>>>> (XEN) Processor #7 7:7 APIC version 20
>>>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high
level lint[0x1])
>>>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high
level lint[0x1])
>>>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high
level lint[0x1])
>>>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high
level lint[0x1])
>>>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high
level lint[0x1])
>>>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high
level lint[0x1])
>>>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high
level lint[0x1])
>>>>>>>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high
level lint[0x1])
>>>>>>>>> (XEN) ACPI: IOAPIC (id[0x08]
address[0xfec00000] gsi_base[0])
>>>>>>>>> (XEN) IOAPIC[0]: apic_id 8, version 32,
address 0xfec00000,
>>>>>>>>> GSI 0-23 (XEN) ACPI: IOAPIC (id[0x09]
address[0xfec80000]
>>>>>>>>> gsi_base[24]) (XEN) IOAPIC[1]: apic_id 9,
version 32, address
>>>>>>>>> 0xfec80000, GSI 24-47 (XEN) ACPI:
INT_SRC_OVR (bus 0 bus_irq 0
>>>>>>>>> global_irq 2 dfl dfl) (XEN) ACPI:
INT_SRC_OVR (bus 0 bus_irq 9
>>>>>>>>> global_irq 9 high level) (XEN) ACPI: IRQ0
used by override.
>>>>>>>>> (XEN) ACPI: IRQ2 used by override.
>>>>>>>>> (XEN) ACPI: IRQ9 used by override.
>>>>>>>>> (XEN) Enabling APIC mode:  Flat.  Using 2
I/O APICs
>>>>>>>>> (XEN) ACPI: HPET id: 0x8086a201 base:
0xfed00000
>>>>>>>>> (XEN) Using ACPI (MADT) for SMP
configuration information
>>>>>>>>> (XEN) mapped APIC to ffff828bffffe000
(fee00000)
>>>>>>>>> (XEN) mapped IOAPIC to ffff828bffffd000
(fec00000)
>>>>>>>>> (XEN) mapped IOAPIC to ffff828bffffc000
(fec80000)
>>>>>>>>> (XEN) Using scheduler: SMP Credit Scheduler
(credit) (XEN)
>>>>>>>>> Initializing CPU#0 (XEN) Detected 2327.591
MHz processor.
>>>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>>>> (XEN) CPU: Physical Processor ID: 0
>>>>>>>>> (XEN) CPU: Processor Core ID: 0
>>>>>>>>> (XEN) VMX: Supported advanced features:
>>>>>>>>> (XEN)  - APIC MMIO access virtualisation
>>>>>>>>> (XEN)  - APIC TPR shadow
>>>>>>>>> (XEN)  - Virtual NMI
>>>>>>>>> (XEN)  - MSR direct-access bitmap
>>>>>>>>> (XEN) HVM: VMX enabled
>>>>>>>>> (XEN) Intel machine check reporting enabled
on CPU#0.
>>>>>>>>> (XEN) CPU0: Thermal monitoring enabled
(TM2)
>>>>>>>>> (XEN) CMCI: CPU0 has no CMCI support
>>>>>>>>> (XEN) CPU0: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
>>>>>>>>> stepping 06 (XEN) enabled ExtINT on CPU#0
(XEN) Booting
>>>>>>>>> processor 1/2 eip 8c000 (XEN) Initializing
CPU#1
>>>>>>>>> (XEN) masked ExtINT on CPU#1
>>>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>>>> (XEN) CPU: Physical Processor ID: 0
>>>>>>>>> (XEN) CPU: Processor Core ID: 2
>>>>>>>>> (XEN) Intel machine check reporting enabled
on CPU#1.
>>>>>>>>> (XEN) CPU1: Thermal monitoring enabled
(TM2)
>>>>>>>>> (XEN) CMCI: CPU1 has no CMCI support
>>>>>>>>> (XEN) CPU1: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
>>>>>>>>> stepping 06 (XEN) Booting processor 2/4 eip
8c000
>>>>>>>>> (XEN) Initializing CPU#2
>>>>>>>>> (XEN) masked ExtINT on CPU#2
>>>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>>>> (XEN) CPU: Physical Processor ID: 1
>>>>>>>>> (XEN) CPU: Processor Core ID: 0
>>>>>>>>> (XEN) Intel machine check reporting enabled
on CPU#2.
>>>>>>>>> (XEN) CPU2: Thermal monitoring enabled
(TM2)
>>>>>>>>> (XEN) CMCI: CPU2 has no CMCI support
>>>>>>>>> (XEN) CPU2: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
>>>>>>>>> stepping 06 (XEN) Booting processor 3/6 eip
8c000
>>>>>>>>> (XEN) Initializing CPU#3
>>>>>>>>> (XEN) masked ExtINT on CPU#3
>>>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>>>> (XEN) CPU: Physical Processor ID: 1
>>>>>>>>> (XEN) CPU: Processor Core ID: 2
>>>>>>>>> (XEN) Intel machine check reporting enabled
on CPU#3.
>>>>>>>>> (XEN) CPU3: Thermal monitoring enabled
(TM2)
>>>>>>>>> (XEN) CMCI: CPU3 has no CMCI support
>>>>>>>>> (XEN) CPU3: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
>>>>>>>>> stepping 06 (XEN) Booting processor 4/1 eip
8c000
>>>>>>>>> (XEN) Initializing CPU#4
>>>>>>>>> (XEN) masked ExtINT on CPU#4
>>>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>>>> (XEN) CPU: Physical Processor ID: 0
>>>>>>>>> (XEN) CPU: Processor Core ID: 1
>>>>>>>>> (XEN) Intel machine check reporting enabled
on CPU#4.
>>>>>>>>> (XEN) CPU4: Thermal monitoring enabled
(TM2)
>>>>>>>>> (XEN) CMCI: CPU4 has no CMCI support
>>>>>>>>> (XEN) CPU4: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
>>>>>>>>> stepping 06 (XEN) Booting processor 5/3 eip
8c000
>>>>>>>>> (XEN) Initializing CPU#5
>>>>>>>>> (XEN) masked ExtINT on CPU#5
>>>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>>>> (XEN) CPU: Physical Processor ID: 0
>>>>>>>>> (XEN) CPU: Processor Core ID: 3
>>>>>>>>> (XEN) Intel machine check reporting enabled
on CPU#5.
>>>>>>>>> (XEN) CPU5: Thermal monitoring enabled
(TM2)
>>>>>>>>> (XEN) CMCI: CPU5 has no CMCI support
>>>>>>>>> (XEN) CPU5: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
>>>>>>>>> stepping 06 (XEN) Booting processor 6/5 eip
8c000
>>>>>>>>> (XEN) Initializing CPU#6
>>>>>>>>> (XEN) masked ExtINT on CPU#6
>>>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>>>> (XEN) CPU: Physical Processor ID: 1
>>>>>>>>> (XEN) CPU: Processor Core ID: 1
>>>>>>>>> (XEN) Intel machine check reporting enabled
on CPU#6.
>>>>>>>>> (XEN) CPU6: Thermal monitoring enabled
(TM2)
>>>>>>>>> (XEN) CMCI: CPU6 has no CMCI support
>>>>>>>>> (XEN) CPU6: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
>>>>>>>>> stepping 06 (XEN) Booting processor 7/7 eip
8c000
>>>>>>>>> (XEN) Initializing CPU#7
>>>>>>>>> (XEN) masked ExtINT on CPU#7
>>>>>>>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>>>>> (XEN) CPU: L2 cache: 6144K
>>>>>>>>> (XEN) CPU: Physical Processor ID: 1
>>>>>>>>> (XEN) CPU: Processor Core ID: 3
>>>>>>>>> (XEN) Intel machine check reporting enabled
on CPU#7.
>>>>>>>>> (XEN) CPU7: Thermal monitoring enabled
(TM2)
>>>>>>>>> (XEN) CMCI: CPU7 has no CMCI support
>>>>>>>>> (XEN) CPU7: Intel(R) Xeon(R) CPU          
E5410  @ 2.33GHz
>>>>>>>>> stepping 06 (XEN) Total of 8 processors
activated.
>>>>>>>>> (XEN) ENABLING IO-APIC IRQs
>>>>>>>>> (XEN)  -> Using new ACK method
>>>>>>>>> (XEN) init IO_APIC IRQs
>>>>>>>>> (XEN)  IO-APIC (apicid-pin) 8-0, 8-16,
8-17, 8-18, 8-19, 8-20,
>>>>>>>>> 8-21, 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4,
9-5, 9-6, 9-7, 9-8,
>>>>>>>>> 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15,
9-16, 9-17, 9-18,
>>>>>>>>> 9-19, 9-20, 9-21, 9-22, 9-23 not connected.
(XEN) ..TIMER:
>>>>>>>>> vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of
>>>>>>>>> MP IRQ sources:
>>>>>>>>> 15. (XEN) number of IO-APIC #8 registers:
24.
>>>>>>>>> (XEN) number of IO-APIC #9 registers: 24.
>>>>>>>>> (XEN) testing the IO
APIC.......................
>>>>>>>>> (XEN) IO APIC #8......
>>>>>>>>> (XEN) .... register #00: 08000000
>>>>>>>>> (XEN) .......    : physical APIC id: 08
>>>>>>>>> (XEN) .......    : Delivery Type: 0
>>>>>>>>> (XEN) .......    : LTS          : 0
>>>>>>>>> (XEN) .... register #01: 00170020
>>>>>>>>> (XEN) .......     : max redirection
entries: 0017
>>>>>>>>> (XEN) .......     : PRQ implemented: 0
>>>>>>>>> (XEN) .......     : IO APIC version: 0020
>>>>>>>>> (XEN) .... IRQ redirection table:
>>>>>>>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat
Dest Deli Vect:
>>>>>>>>> (XEN)  00 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  01 001 01  0    0    0   0   0    1 
1    20
>>>>>>>>> (XEN)  02 001 01  0    0    0   0   0    1 
1    F0
>>>>>>>>> (XEN)  03 001 01  0    0    0   0   0    1 
1    28
>>>>>>>>> (XEN)  04 001 01  0    0    0   0   0    1 
1    30
>>>>>>>>> (XEN)  05 001 01  0    0    0   0   0    1 
1    38
>>>>>>>>> (XEN)  06 001 01  0    0    0   0   0    1 
1    40
>>>>>>>>> (XEN)  07 001 01  0    0    0   0   0    1 
1    48
>>>>>>>>> (XEN)  08 001 01  0    0    0   0   0    1 
1    50
>>>>>>>>> (XEN)  09 001 01  1    1    0   0   0    1 
1    58
>>>>>>>>> (XEN)  0a 001 01  0    0    0   0   0    1 
1    60
>>>>>>>>> (XEN)  0b 001 01  0    0    0   0   0    1 
1    68
>>>>>>>>> (XEN)  0c 001 01  0    0    0   0   0    1 
1    70
>>>>>>>>> (XEN)  0d 001 01  0    0    0   0   0    1 
1    78
>>>>>>>>> (XEN)  0e 001 01  0    0    0   0   0    1 
1    88
>>>>>>>>> (XEN)  0f 001 01  0    0    0   0   0    1 
1    90
>>>>>>>>> (XEN)  10 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  11 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  12 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  13 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  14 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  15 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  16 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  17 000 00  1    0    0   0   0    0 
0 00 (XEN) IO
>>>>>>>>> APIC #9...... (XEN) .... register #00:
09000000
>>>>>>>>> (XEN) .......    : physical APIC id: 09
>>>>>>>>> (XEN) .......    : Delivery Type: 0
>>>>>>>>> (XEN) .......    : LTS          : 0
>>>>>>>>> (XEN) .... register #01: 00178020
>>>>>>>>> (XEN) .......     : max redirection
entries: 0017
>>>>>>>>> (XEN) .......     : PRQ implemented: 1
>>>>>>>>> (XEN) .......     : IO APIC version: 0020
>>>>>>>>> (XEN) .... register #02: 09000000
>>>>>>>>> (XEN) .......     : arbitration: 09
>>>>>>>>> (XEN) .... register #03: 00000001
>>>>>>>>> (XEN) .......     : Boot DT    : 1
>>>>>>>>> (XEN) .... IRQ redirection table:
>>>>>>>>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat
Dest Deli Vect:
>>>>>>>>> (XEN)  00 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  01 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  02 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  03 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  04 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  05 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  06 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  07 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  08 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  09 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  0a 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  0b 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  0c 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  0d 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  0e 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  0f 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  10 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  11 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  12 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  13 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  14 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  15 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  16 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN)  17 000 00  1    0    0   0   0    0 
0    00
>>>>>>>>> (XEN) Using vector-based indexing
>>>>>>>>> (XEN) IRQ to pin mappings:
>>>>>>>>> (XEN) IRQ240 -> 0:2
>>>>>>>>> (XEN) IRQ32 -> 0:1
>>>>>>>>> (XEN) IRQ40 -> 0:3
>>>>>>>>> (XEN) IRQ48 -> 0:4
>>>>>>>>> (XEN) IRQ56 -> 0:5
>>>>>>>>> (XEN) IRQ64 -> 0:6
>>>>>>>>> (XEN) IRQ72 -> 0:7
>>>>>>>>> (XEN) IRQ80 -> 0:8
>>>>>>>>> (XEN) IRQ88 -> 0:9
>>>>>>>>> (XEN) IRQ96 -> 0:10
>>>>>>>>> (XEN) IRQ104 -> 0:11
>>>>>>>>> (XEN) IRQ112 -> 0:12
>>>>>>>>> (XEN) IRQ120 -> 0:13
>>>>>>>>> (XEN) IRQ136 -> 0:14
>>>>>>>>> (XEN) IRQ144 -> 0:15
>>>>>>>>> (XEN) ....................................
done.
>>>>>>>>> (XEN) Using local APIC timer interrupts.
>>>>>>>>> (XEN) calibrating APIC timer ...
>>>>>>>>> (XEN) ..... CPU clock speed is 2327.5697
MHz.
>>>>>>>>> (XEN) ..... host bus clock speed is
332.5098 MHz.
>>>>>>>>> (XEN) ..... bus_scale = 0x00015489
>>>>>>>>> (XEN) checking TSC synchronization across 8
CPUs: passed.
>>>>>>>>> (XEN) Platform timer is 14.318MHz HPET
>>>>>>>>> (XEN) Brought up 8 CPUs
>>>>>>>>> (XEN) I/O virtualisation disabled
>>>>>>>>> (XEN) HPET: 3 timers in total, 0 timers
will be used for
>>>>>>>>> broadcast (XEN) ACPI sleep modes: S3 (XEN)
mcheck_poll:
>>>>>>>>> Machine check polling timer started. (XEN)
*** LOADING DOMAIN
>>>>>>>>> 0 *** (XEN)  Xen  kernel: 64-bit, lsb,
compat32
>>>>>>>>> (XEN)  Dom0 kernel: 64-bit, lsb, paddr
0xffffffff80200000 ->
>>>>>>>>> 0xffffffff8074310c (XEN) PHYSICAL MEMORY
ARRANGEMENT:
>>>>>>>>> (XEN)  Dom0 alloc.:
>>> 0000000256000000->0000000258000000 (253952
>>>>>>>>> pages to be allocated) (XEN) VIRTUAL MEMORY
ARRANGEMENT:
>>>>>>>>> (XEN)  Loaded kernel:
ffffffff80200000->ffffffff8074310c
>>>>>>>>> (XEN)  Init. ramdisk:
ffffffff80744000->ffffffff80f63a00
>>>>>>>>> (XEN)  Phys-Mach map:
ffffffff80f64000->ffffffff81164000
>>>>>>>>> (XEN)  Start info:   
ffffffff81164000->ffffffff811644b4
>>>>>>>>> (XEN)  Page tables:  
ffffffff81165000->ffffffff81172000
>>>>>>>>> (XEN)  Boot stack:   
ffffffff81172000->ffffffff81173000
>>>>>>>>> (XEN)  TOTAL:        
ffffffff80000000->ffffffff81400000
>>>>>>>>> (XEN)  ENTRY ADDRESS: ffffffff80200000
>>>>>>>>> (XEN) Dom0 has maximum 1 VCPUs
>>>>>>>>> (XEN) Scrubbing Free
>>>>>>>>> RAM:
>>>>>>>>>
>>>>>
...............................................................
>>>>> .......do
>>>>>>> ne.
>>>>>>>>> (XEN) Xen trace buffers: disabled
>>>>>>>>> (XEN) Std. Loglevel: All
>>>>>>>>> (XEN) Guest Loglevel: Nothing
(Rate-limited: Errors and
>>>>>>>>> warnings) (XEN) Xen is relinquishing VGA
console.
>>>>>>>>> (XEN) *** Serial input -> DOM0 (type
'CTRL-a' three times to
>>>>>>>>> switch input to Xen) (XEN) Freed 124kB init
memory.
>>>>>>>>>
>>>>>>>>>
===========================================>>>>>>>>>
>>>>>>>>> [root@b52 ~]# xenpm get-cpuidle-states
>>>>>>>>> Max C-state: C7
>>>>>>>>>
>>>>>>>>> cpu id               : 0
>>>>>>>>> total C-states       : 0
>>>>>>>>> idle time(ms)        : 0
>>>>>>>>>
>>>>>>>>> cpu id               : 1
>>>>>>>>> total C-states       : 0
>>>>>>>>> idle time(ms)        : 0
>>>>>>>>>
>>>>>>>>> cpu id               : 2
>>>>>>>>> total C-states       : 0
>>>>>>>>> idle time(ms)        : 0
>>>>>>>>>
>>>>>>>>> cpu id               : 3
>>>>>>>>> total C-states       : 0
>>>>>>>>> idle time(ms)        : 0
>>>>>>>>>
>>>>>>>>> cpu id               : 4
>>>>>>>>> total C-states       : 0
>>>>>>>>> idle time(ms)        : 0
>>>>>>>>>
>>>>>>>>> cpu id               : 5
>>>>>>>>> total C-states       : 0
>>>>>>>>> idle time(ms)        : 0
>>>>>>>>>
>>>>>>>>> cpu id               : 6
>>>>>>>>> total C-states       : 0
>>>>>>>>> idle time(ms)        : 0
>>>>>>>>>
>>>>>>>>> cpu id               : 7
>>>>>>>>> total C-states       : 0
>>>>>>>>> idle time(ms)        : 0
>>>>>>>>>
>>>>>>>>> [root@b52 ~]# xenpm get-cpufreq-states
>>>>>>>>> [root@b52 ~]# xenpm get-cpufreq-para
>>>>>>>>> [CPU0] failed to get cpufreq parameter
>>>>>>>>> [CPU1] failed to get cpufreq parameter
>>>>>>>>> [CPU2] failed to get cpufreq parameter
>>>>>>>>> [CPU3] failed to get cpufreq parameter
>>>>>>>>> [CPU4] failed to get cpufreq parameter
>>>>>>>>> [CPU5] failed to get cpufreq parameter
>>>>>>>>> [CPU6] failed to get cpufreq parameter
>>>>>>>>> [CPU7] failed to get cpufreq parameter
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks
>>>>>>>>>
>>>>>>>>> Mike
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Xen-devel mailing list
>>>>>>>> Xen-devel@lists.xensource.com
>>>>>>>> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Xen devel - Jun 2009 - [Fwd: Problems with power management]

[Xen-devel] [Fwd: Problems with power management]

Re: [Xen-devel] [Fwd: Problems with power management]

RE: [Xen-devel] [Fwd: Problems with power management]

Re: [Xen-devel] [Fwd: Problems with power management]

RE: [Xen-devel] [Fwd: Problems with power management]

RE: [Xen-devel] [Fwd: Problems with power management]

RE: [Xen-devel] [Fwd: Problems with power management]

RE: [Xen-devel] [Fwd: Problems with power management]

RE: [Xen-devel] [Fwd: Problems with power management]

RE: [Xen-devel] [Fwd: Problems with power management]