Adit Ranadive
2007-Sep-18 00:07 UTC
[Xen-devel] Kernel Panic in booting Xen 3.1 on Dell PowerEdge Server 1950
Hi,
Im having some issues with installing/running Xen 3.1 (source tree
from the 3.1 tree). The host OS is Red Hat 4 Update 5. Everything is
downloading and compiling fine.
The problem arises when I need to create an initrd.
The server comes with SCSI disks and Im not sure if this version of
Linux (2.6.18) supports them. I make the initrd with the follwoing
command:
mkinitrd -v -f initrd-xen.img 2.6.18-xen (i cannot use the
--omit-scsi-modules since i need them).
It loops on this "Looking for deps of ehci_hcd" . Ive tried changing
the config flags to build the required scsi modules into the kernel or
just as modules but it still gives the same error.
Also if I build it with the --omit-scsi-modules flag and boot into Xen
I get the Kernel panic error:
mount: error 6 mouting ext3
mount: error 2 mouting none
Switching to new root
switchroot:mount failed: 22
umount /initrd/dev failed:2
Kernel panic - not syncing : Attempted to kill init!
Any suggestions on how to fix the drivers to use the scsi hard disks?
Thanks,
Adit
My fstab file:
LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs defaults 0 0
LABEL=/home /home ext3 defaults 1 2
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
LABEL=SWAP-sda3 swap swap defaults 0 0
/dev/hda /media/cdrom auto
pamconsole,fscontext=system_u:object_r:removable_t,exec,noauto,managed
0 0
/dev/scd0 /media/cdrom1 auto
pamconsole,fscontext=system_u:object_r:removable_t,exec,noauto,managed
0 0
My grub conf:
default=0
timeout=15
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Red Hat Enterprise Linux AS (2.6.9-55.0.6.ELsmp)
root (hd0,0)
kernel /vmlinuz-2.6.9-55.0.6.ELsmp ro root=LABEL=/ noapic rhgb quiet
initrd /initrd-2.6.9-55.0.6.ELsmp.img
title Red Hat Enterprise Linux AS (2.6.9-55.0.6.EL)
root (hd0,0)
kernel /vmlinuz-2.6.9-55.0.6.EL ro root=LABEL=/ noapic rhgb quiet
initrd /initrd-2.6.9-55.0.6.EL.img
title Red Hat Enterprise Linux AS (2.6.9-55.ELsmp)
root (hd0,0)
kernel /vmlinuz-2.6.9-55.ELsmp ro root=LABEL=/ noapic rhgb quiet
initrd /initrd-2.6.9-55.ELsmp.img
title Red Hat Enterprise Linux AS-up (2.6.9-55.EL)
root (hd0,0)
kernel /vmlinuz-2.6.9-55.EL ro root=LABEL=/ noapic rhgb quiet
initrd /initrd-2.6.9-55.EL.img
title Xen-SmartIO-2.6 (Compiled)
root (hd0,0)
kernel /xen.gz
module /vmlinuz-2.6.16-rc3-xen0 ro root=/dev/sdb2 console=tty0
module /initrd-xen0-1.img
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Adit Ranadive
2007-Sep-18 16:24 UTC
[Xen-users] Kernel Panic in booting Xen 3.1 on Dell PowerEdge Server 1950
Hi,
Im having some issues with installing/running Xen 3.1 (source tree
from the 3.1 tree). The host OS is Red Hat 4 Update 5. Everything is
downloading and compiling fine.
The problem arises when I need to create an initrd.
The server comes with SCSI disks and Im not sure if this version of
Linux (2.6.18) supports them. I make the initrd with the follwoing
command:
mkinitrd -v -f initrd-xen.img 2.6.18-xen (i cannot use the
--omit-scsi-modules since i need them).
It loops on this "Looking for deps of ehci_hcd" . Ive tried changing
the config flags to build the required scsi modules into the kernel or
just as modules but it still gives the same error.
Also if I build it with the --omit-scsi-modules flag and boot into Xen
I get the Kernel panic error:
mount: error 6 mouting ext3
mount: error 2 mouting none
Switching to new root
switchroot:mount failed: 22
umount /initrd/dev failed:2
Kernel panic - not syncing : Attempted to kill init!
Any suggestions on how to fix the drivers to use the scsi hard disks?
Thanks,
Adit
My fstab file:
LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs defaults 0 0
LABEL=/home /home ext3 defaults 1 2
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
LABEL=SWAP-sda3 swap swap defaults 0 0
/dev/hda /media/cdrom auto
pamconsole,fscontext=system_u:object_r:removable_t,exec,noauto,managed
0 0
/dev/scd0 /media/cdrom1 auto
pamconsole,fscontext=system_u:object_r:removable_t,exec,noauto,managed
0 0
My grub conf:
default=0
timeout=15
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Red Hat Enterprise Linux AS (2.6.9-55.0.6.ELsmp)
root (hd0,0)
kernel /vmlinuz-2.6.9-55.0.6.ELsmp ro root=LABEL=/ noapic rhgb quiet
initrd /initrd-2.6.9-55.0.6.ELsmp.img
title Red Hat Enterprise Linux AS (2.6.9-55.0.6.EL)
root (hd0,0)
kernel /vmlinuz-2.6.9-55.0.6.EL ro root=LABEL=/ noapic rhgb quiet
initrd /initrd-2.6.9-55.0.6.EL.img
title Red Hat Enterprise Linux AS (2.6.9-55.ELsmp)
root (hd0,0)
kernel /vmlinuz-2.6.9-55.ELsmp ro root=LABEL=/ noapic rhgb quiet
initrd /initrd-2.6.9-55.ELsmp.img
title Red Hat Enterprise Linux AS-up (2.6.9-55.EL)
root (hd0,0)
kernel /vmlinuz-2.6.9-55.EL ro root=LABEL=/ noapic rhgb quiet
initrd /initrd-2.6.9-55.EL.img
title Xen-SmartIO-2.6 (Compiled)
root (hd0,0)
kernel /xen.gz
module /vmlinuz-2.6.16-rc3-xen0 ro root=/dev/sdb2 console=tty0
module /initrd-xen0-1.img
--
Adit Ranadive
MS CS Candidate
Georgia Institute of Technology,
Atlanta, GA
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
Martin Goldstone
2007-Sep-18 16:41 UTC
Re: [Xen-users] Kernel Panic in booting Xen 3.1 on Dell PowerEdge Server 1950
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I''ve got Xen 3.1 running on a couple of 1950''s here with SAS drives (I''m running CentOS 5 though, not RHEL4u5, but I can''t see that causing the problem you''re seeing). I encountered a few problems to begin with, and one or two still trip me up when I set up a new server (I swear, sometimes it can''t decide whether it wants root=LABEL=/ or root=/dev/sdXX, mostly its the latter IIRC). You might want to try playing with that. I know it might seem stupid, but you did depmod it, didn''t you? That caught me out on a couple of occasions. I''d also make sure you explicitly include sd_mod, scsi_mod and any megaraid modules you can find in your initrd. Also, your grub.conf doesn''t show the same files that your mkinitrd command does, can you verify you are definately using a kernel that was compiled with xen 3.1? Also, is there any meaningful output above those lines that you''ve mentioned from the panic? Hope this helps, Mart Adit Ranadive wrote:> Hi, > > Im having some issues with installing/running Xen 3.1 (source tree > from the 3.1 tree). The host OS is Red Hat 4 Update 5. Everything is > downloading and compiling fine. > The problem arises when I need to create an initrd. > The server comes with SCSI disks and Im not sure if this version of > Linux (2.6.18) supports them. I make the initrd with the follwoing > command: > > mkinitrd -v -f initrd-xen.img 2.6.18-xen (i cannot use the > --omit-scsi-modules since i need them). > > It loops on this "Looking for deps of ehci_hcd" . Ive tried changing > the config flags to build the required scsi modules into the kernel or > just as modules but it still gives the same error. > Also if I build it with the --omit-scsi-modules flag and boot into Xen > I get the Kernel panic error: > > mount: error 6 mouting ext3 > mount: error 2 mouting none > Switching to new root > switchroot:mount failed: 22 > umount /initrd/dev failed:2 > Kernel panic - not syncing : Attempted to kill init! > > Any suggestions on how to fix the drivers to use the scsi hard disks? > > Thanks, > Adit > > My fstab file: > > LABEL=/ / ext3 defaults 1 1 > LABEL=/boot /boot ext3 defaults 1 2 > none /dev/pts devpts gid=5,mode=620 0 0 > none /dev/shm tmpfs defaults 0 0 > LABEL=/home /home ext3 defaults 1 2 > none /proc proc defaults 0 0 > none /sys sysfs defaults 0 0 > LABEL=SWAP-sda3 swap swap defaults 0 0 > /dev/hda /media/cdrom auto > pamconsole,fscontext=system_u:object_r:removable_t,exec,noauto,managed > 0 0 > /dev/scd0 /media/cdrom1 auto > pamconsole,fscontext=system_u:object_r:removable_t,exec,noauto,managed > 0 0 > > My grub conf: > > default=0 > timeout=15 > splashimage=(hd0,0)/grub/splash.xpm.gz > hiddenmenu > title Red Hat Enterprise Linux AS (2.6.9-55.0.6.ELsmp) > root (hd0,0) > kernel /vmlinuz-2.6.9-55.0.6.ELsmp ro root=LABEL=/ noapic rhgb quiet > initrd /initrd-2.6.9-55.0.6.ELsmp.img > title Red Hat Enterprise Linux AS (2.6.9-55.0.6.EL) > root (hd0,0) > kernel /vmlinuz-2.6.9-55.0.6.EL ro root=LABEL=/ noapic rhgb quiet > initrd /initrd-2.6.9-55.0.6.EL.img > title Red Hat Enterprise Linux AS (2.6.9-55.ELsmp) > root (hd0,0) > kernel /vmlinuz-2.6.9-55.ELsmp ro root=LABEL=/ noapic rhgb quiet > initrd /initrd-2.6.9-55.ELsmp.img > title Red Hat Enterprise Linux AS-up (2.6.9-55.EL) > root (hd0,0) > kernel /vmlinuz-2.6.9-55.EL ro root=LABEL=/ noapic rhgb quiet > initrd /initrd-2.6.9-55.EL.img > title Xen-SmartIO-2.6 (Compiled) > root (hd0,0) > kernel /xen.gz > module /vmlinuz-2.6.16-rc3-xen0 ro root=/dev/sdb2 console=tty0 > module /initrd-xen0-1.img > >- -- Martin Goldstone Keele University, Keele, IT Systems Administrator Staffordshire, United Kingdom, ST5 5BG Computing Services Telephone: +44 1782 584457 "I feel a great disturbance in the network, as if millions of processes cried out in terror and were suddenly silenced" Boyd Duffee -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFG7/+vRnwIDhcMR9MRArV3AKC4F4bZKjwo6jUN9imfsIQAWSJ/GwCcCmxj nD71bgZkj1V0LXsklihbupg=PHhP -----END PGP SIGNATURE----- _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Adit Ranadive
2007-Sep-18 18:35 UTC
Re: [Xen-users] Kernel Panic in booting Xen 3.1 on Dell PowerEdge Server 1950
Oops .. sorry about that .. Here is the xen 3.1 grub.conf:
default=0
timeout=15
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Red Hat Enterprise Linux AS (2.6.9-55.0.6.ELsmp)
root (hd0,0)
kernel /vmlinuz-2.6.9-55.0.6.ELsmp ro root=LABEL=/ noapic rhgb quiet
initrd /initrd-2.6.9-55.0.6.ELsmp.img
title Red Hat Enterprise Linux AS (2.6.9-55.0.6.EL)
root (hd0,0)
kernel /vmlinuz-2.6.9-55.0.6.EL ro root=LABEL=/ noapic rhgb quiet
initrd /initrd-2.6.9-55.0.6.EL.img
title Red Hat Enterprise Linux AS (2.6.9-55.ELsmp)
root (hd0,0)
kernel /vmlinuz-2.6.9-55.ELsmp ro root=LABEL=/ noapic rhgb quiet
initrd /initrd-2.6.9-55.ELsmp.img
title Red Hat Enterprise Linux AS-up (2.6.9-55.EL)
root (hd0,0)
kernel /vmlinuz-2.6.9-55.EL ro root=LABEL=/ noapic rhgb quiet
initrd /initrd-2.6.9-55.EL.img
title Xen-SmartIO-2.6 (Compiled)
root (hd0,0)
kernel /xen-3.1.0.gz
module /vmlinuz-2.6.18-xen ro root=/dev/sdb2 console=tty0
module /initrd-xen.img
Nothing unusual about the lines above the kernel panic just the
regular init stuff.
I did depmod before mkinitrd but the initrd doesnt seem to be picking
up the ehci-hcd module for some reason.
Did you have to do any special config changes to make the initial ramdisk ?
Thanks,
Adit
On 9/18/07, Martin Goldstone <m.j.goldstone@isc.keele.ac.uk>
wrote:> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi,
>
> I''ve got Xen 3.1 running on a couple of 1950''s here with
SAS drives (I''m
> running CentOS 5 though, not RHEL4u5, but I can''t see that causing
the
> problem you''re seeing). I encountered a few problems to begin
with, and
> one or two still trip me up when I set up a new server (I swear,
> sometimes it can''t decide whether it wants root=LABEL=/ or
> root=/dev/sdXX, mostly its the latter IIRC). You might want to try
> playing with that.
>
> I know it might seem stupid, but you did depmod it, didn''t you?
That
> caught me out on a couple of occasions. I''d also make sure you
> explicitly include sd_mod, scsi_mod and any megaraid modules you can
> find in your initrd. Also, your grub.conf doesn''t show the same
files
> that your mkinitrd command does, can you verify you are definately using
> a kernel that was compiled with xen 3.1?
>
> Also, is there any meaningful output above those lines that you''ve
> mentioned from the panic?
>
> Hope this helps,
>
> Mart
>
> Adit Ranadive wrote:
> > Hi,
> >
> > Im having some issues with installing/running Xen 3.1 (source tree
> > from the 3.1 tree). The host OS is Red Hat 4 Update 5. Everything is
> > downloading and compiling fine.
> > The problem arises when I need to create an initrd.
> > The server comes with SCSI disks and Im not sure if this version of
> > Linux (2.6.18) supports them. I make the initrd with the follwoing
> > command:
> >
> > mkinitrd -v -f initrd-xen.img 2.6.18-xen (i cannot use the
> > --omit-scsi-modules since i need them).
> >
> > It loops on this "Looking for deps of ehci_hcd" . Ive tried
changing
> > the config flags to build the required scsi modules into the kernel or
> > just as modules but it still gives the same error.
> > Also if I build it with the --omit-scsi-modules flag and boot into Xen
> > I get the Kernel panic error:
> >
> > mount: error 6 mouting ext3
> > mount: error 2 mouting none
> > Switching to new root
> > switchroot:mount failed: 22
> > umount /initrd/dev failed:2
> > Kernel panic - not syncing : Attempted to kill init!
> >
> > Any suggestions on how to fix the drivers to use the scsi hard disks?
> >
> > Thanks,
> > Adit
> >
> > My fstab file:
> >
> > LABEL=/ / ext3 defaults
1 1
> > LABEL=/boot /boot ext3 defaults
1 2
> > none /dev/pts devpts gid=5,mode=620
0 0
> > none /dev/shm tmpfs defaults
0 0
> > LABEL=/home /home ext3 defaults
1 2
> > none /proc proc defaults
0 0
> > none /sys sysfs defaults
0 0
> > LABEL=SWAP-sda3 swap swap defaults
0 0
> > /dev/hda /media/cdrom auto
> > pamconsole,fscontext=system_u:object_r:removable_t,exec,noauto,managed
> > 0 0
> > /dev/scd0 /media/cdrom1 auto
> > pamconsole,fscontext=system_u:object_r:removable_t,exec,noauto,managed
> > 0 0
> >
> > My grub conf:
> >
> > default=0
> > timeout=15
> > splashimage=(hd0,0)/grub/splash.xpm.gz
> > hiddenmenu
> > title Red Hat Enterprise Linux AS (2.6.9-55.0.6.ELsmp)
> > root (hd0,0)
> > kernel /vmlinuz-2.6.9-55.0.6.ELsmp ro root=LABEL=/ noapic rhgb
quiet
> > initrd /initrd-2.6.9-55.0.6.ELsmp.img
> > title Red Hat Enterprise Linux AS (2.6.9-55.0.6.EL)
> > root (hd0,0)
> > kernel /vmlinuz-2.6.9-55.0.6.EL ro root=LABEL=/ noapic rhgb
quiet
> > initrd /initrd-2.6.9-55.0.6.EL.img
> > title Red Hat Enterprise Linux AS (2.6.9-55.ELsmp)
> > root (hd0,0)
> > kernel /vmlinuz-2.6.9-55.ELsmp ro root=LABEL=/ noapic rhgb
quiet
> > initrd /initrd-2.6.9-55.ELsmp.img
> > title Red Hat Enterprise Linux AS-up (2.6.9-55.EL)
> > root (hd0,0)
> > kernel /vmlinuz-2.6.9-55.EL ro root=LABEL=/ noapic rhgb quiet
> > initrd /initrd-2.6.9-55.EL.img
> > title Xen-SmartIO-2.6 (Compiled)
> > root (hd0,0)
> > kernel /xen.gz
> > module /vmlinuz-2.6.16-rc3-xen0 ro root=/dev/sdb2 console=tty0
> > module /initrd-xen0-1.img
> >
> >
>
> - --
> Martin Goldstone Keele University, Keele,
> IT Systems Administrator Staffordshire, United Kingdom, ST5 5BG
> Computing Services Telephone: +44 1782 584457
>
> "I feel a great disturbance in the network, as if millions of
> processes cried out in terror and were suddenly silenced"
> Boyd Duffee
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.7 (MingW32)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iD8DBQFG7/+vRnwIDhcMR9MRArV3AKC4F4bZKjwo6jUN9imfsIQAWSJ/GwCcCmxj
> nD71bgZkj1V0LXsklihbupg> =PHhP
> -----END PGP SIGNATURE-----
>
>
--
Adit Ranadive
MS CS Candidate
Georgia Institute of Technology,
Atlanta, GA
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
Martin Goldstone
2007-Sep-19 13:15 UTC
Re: [Xen-users] Kernel Panic in booting Xen 3.1 on Dell PowerEdge Server 1950
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hmm, I didn''t have to make any special config changes, so I''m not sure whats going on here. Can you verify that ehci-hcd.ko actually exists in /lib/modules/2.6.18-xen/kernel/drivers/usb/host/? Just a thought, are you using 64-bit or 32-bit? I''m using 64-bit. And just to clarify, are you installing from tarball, rpm or source (AFAIK, rpm install builds the initrd automatically) ? Mart Adit Ranadive wrote:> Oops .. sorry about that .. Here is the xen 3.1 grub.conf: > > default=0 > timeout=15 > splashimage=(hd0,0)/grub/splash.xpm.gz > hiddenmenu > title Red Hat Enterprise Linux AS (2.6.9-55.0.6.ELsmp) > root (hd0,0) > kernel /vmlinuz-2.6.9-55.0.6.ELsmp ro root=LABEL=/ noapic rhgb quiet > initrd /initrd-2.6.9-55.0.6.ELsmp.img > title Red Hat Enterprise Linux AS (2.6.9-55.0.6.EL) > root (hd0,0) > kernel /vmlinuz-2.6.9-55.0.6.EL ro root=LABEL=/ noapic rhgb quiet > initrd /initrd-2.6.9-55.0.6.EL.img > title Red Hat Enterprise Linux AS (2.6.9-55.ELsmp) > root (hd0,0) > kernel /vmlinuz-2.6.9-55.ELsmp ro root=LABEL=/ noapic rhgb quiet > initrd /initrd-2.6.9-55.ELsmp.img > title Red Hat Enterprise Linux AS-up (2.6.9-55.EL) > root (hd0,0) > kernel /vmlinuz-2.6.9-55.EL ro root=LABEL=/ noapic rhgb quiet > initrd /initrd-2.6.9-55.EL.img > title Xen-SmartIO-2.6 (Compiled) > root (hd0,0) > kernel /xen-3.1.0.gz > module /vmlinuz-2.6.18-xen ro root=/dev/sdb2 console=tty0 > module /initrd-xen.img > > Nothing unusual about the lines above the kernel panic just the > regular init stuff. > > I did depmod before mkinitrd but the initrd doesnt seem to be picking > up the ehci-hcd module for some reason. > Did you have to do any special config changes to make the initial ramdisk ? > > Thanks, > Adit > > > On 9/18/07, Martin Goldstone <m.j.goldstone@isc.keele.ac.uk> wrote: > Hi, > > I''ve got Xen 3.1 running on a couple of 1950''s here with SAS drives (I''m > running CentOS 5 though, not RHEL4u5, but I can''t see that causing the > problem you''re seeing). I encountered a few problems to begin with, and > one or two still trip me up when I set up a new server (I swear, > sometimes it can''t decide whether it wants root=LABEL=/ or > root=/dev/sdXX, mostly its the latter IIRC). You might want to try > playing with that. > > I know it might seem stupid, but you did depmod it, didn''t you? That > caught me out on a couple of occasions. I''d also make sure you > explicitly include sd_mod, scsi_mod and any megaraid modules you can > find in your initrd. Also, your grub.conf doesn''t show the same files > that your mkinitrd command does, can you verify you are definately using > a kernel that was compiled with xen 3.1? > > Also, is there any meaningful output above those lines that you''ve > mentioned from the panic? > > Hope this helps, > > Mart > > Adit Ranadive wrote: >>>> Hi, >>>> >>>> Im having some issues with installing/running Xen 3.1 (source tree >>>> from the 3.1 tree). The host OS is Red Hat 4 Update 5. Everything is >>>> downloading and compiling fine. >>>> The problem arises when I need to create an initrd. >>>> The server comes with SCSI disks and Im not sure if this version of >>>> Linux (2.6.18) supports them. I make the initrd with the follwoing >>>> command: >>>> >>>> mkinitrd -v -f initrd-xen.img 2.6.18-xen (i cannot use the >>>> --omit-scsi-modules since i need them). >>>> >>>> It loops on this "Looking for deps of ehci_hcd" . Ive tried changing >>>> the config flags to build the required scsi modules into the kernel or >>>> just as modules but it still gives the same error. >>>> Also if I build it with the --omit-scsi-modules flag and boot into Xen >>>> I get the Kernel panic error: >>>> >>>> mount: error 6 mouting ext3 >>>> mount: error 2 mouting none >>>> Switching to new root >>>> switchroot:mount failed: 22 >>>> umount /initrd/dev failed:2 >>>> Kernel panic - not syncing : Attempted to kill init! >>>> >>>> Any suggestions on how to fix the drivers to use the scsi hard disks? >>>> >>>> Thanks, >>>> Adit >>>> >>>> My fstab file: >>>> >>>> LABEL=/ / ext3 defaults 1 1 >>>> LABEL=/boot /boot ext3 defaults 1 2 >>>> none /dev/pts devpts gid=5,mode=620 0 0 >>>> none /dev/shm tmpfs defaults 0 0 >>>> LABEL=/home /home ext3 defaults 1 2 >>>> none /proc proc defaults 0 0 >>>> none /sys sysfs defaults 0 0 >>>> LABEL=SWAP-sda3 swap swap defaults 0 0 >>>> /dev/hda /media/cdrom auto >>>> pamconsole,fscontext=system_u:object_r:removable_t,exec,noauto,managed >>>> 0 0 >>>> /dev/scd0 /media/cdrom1 auto >>>> pamconsole,fscontext=system_u:object_r:removable_t,exec,noauto,managed >>>> 0 0 >>>> >>>> My grub conf: >>>> >>>> default=0 >>>> timeout=15 >>>> splashimage=(hd0,0)/grub/splash.xpm.gz >>>> hiddenmenu >>>> title Red Hat Enterprise Linux AS (2.6.9-55.0.6.ELsmp) >>>> root (hd0,0) >>>> kernel /vmlinuz-2.6.9-55.0.6.ELsmp ro root=LABEL=/ noapic rhgb quiet >>>> initrd /initrd-2.6.9-55.0.6.ELsmp.img >>>> title Red Hat Enterprise Linux AS (2.6.9-55.0.6.EL) >>>> root (hd0,0) >>>> kernel /vmlinuz-2.6.9-55.0.6.EL ro root=LABEL=/ noapic rhgb quiet >>>> initrd /initrd-2.6.9-55.0.6.EL.img >>>> title Red Hat Enterprise Linux AS (2.6.9-55.ELsmp) >>>> root (hd0,0) >>>> kernel /vmlinuz-2.6.9-55.ELsmp ro root=LABEL=/ noapic rhgb quiet >>>> initrd /initrd-2.6.9-55.ELsmp.img >>>> title Red Hat Enterprise Linux AS-up (2.6.9-55.EL) >>>> root (hd0,0) >>>> kernel /vmlinuz-2.6.9-55.EL ro root=LABEL=/ noapic rhgb quiet >>>> initrd /initrd-2.6.9-55.EL.img >>>> title Xen-SmartIO-2.6 (Compiled) >>>> root (hd0,0) >>>> kernel /xen.gz >>>> module /vmlinuz-2.6.16-rc3-xen0 ro root=/dev/sdb2 console=tty0 >>>> module /initrd-xen0-1.img >>>> >>>> >> >>- -- Martin Goldstone Keele University, Keele, IT Systems Administrator Staffordshire, United Kingdom, ST5 5BG Computing Services Telephone: +44 1782 584457 "I feel a great disturbance in the network, as if millions of processes cried out in terror and were suddenly silenced" Boyd Duffee -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFG8SDlRnwIDhcMR9MRAlkuAJ4n7rUJwo5GcOGQZaBA0dOMBCAJrwCfaTsv LVMqHyUOUFzl+Gt4JM0V4Vw=Wppf -----END PGP SIGNATURE----- _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users