thr3ads.net - Xen devel - [Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode [Sep 2006]

If this information is useful, please help other people find it:
Share via:

shobha ranganathan

2006-Sep-26 21:41 UTC

[Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

I download xen3.0.2-23.src.rpm and build the dom0 Kernel in Fedora COre 5 in x86
mode. I did not build a domU kernel at all.
   
  I tried to run ./xenguest-install.py in dom0 kernel after booting into it.. I
got this error
  "No module named libvirt".
   
  I then tried installing libvirt-0.0.6-1.i386.rpm using
  "rpm --install libvirt-0.0.6-1.i386.rpm"
   
  I get failed dependencies error such as
  "libxenstore.so is needed by libvirt-0.0.6-1.i386
  xen is needed by libvirt-0.0.6-1.i386"
   
  what am I missing here ? I have libxenstore.so in /usr/lib.
   
  thanks for your help
  Shobha

 		
---------------------------------
Stay in the know. Pulse on the new Yahoo.com.  Check it out. 

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Anthony Liguori

2006-Sep-26 22:21 UTC

head link

[Xen-users] Re: [Xen-devel] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

Please don''t cross-post.

xenguest-install.py is not part of upstream Xen.  It''s RedHat specific.
Please ask in the fedora-xen users list.

Regards,

Anthony Liguori

shobha ranganathan wrote:> I download xen3.0.2-23.src.rpm and build the dom0 Kernel in Fedora 
> COre 5 in x86 mode. I did not build a domU kernel at all.
>  
> I tried to run ./xenguest-install.py in dom0 kernel after booting into 
> it.. I got this error
> "No module named libvirt".
>  
> I then tried installing libvirt-0.0.6-1.i386.rpm using
> "rpm --install libvirt-0.0.6-1.i386.rpm"
>  
> I get failed dependencies error such as
> "libxenstore.so is needed by libvirt-0.0.6-1.i386
> xen is needed by libvirt-0.0.6-1.i386"
>  
> what am I missing here ? I have libxenstore.so in /usr/lib.
>  
> thanks for your help
> Shobha
>
> ------------------------------------------------------------------------
> Stay in the know. Pulse on the new Yahoo.com. Check it out. 
> <http://us.rd.yahoo.com/evt=42974/*http://www.yahoo.com/preview>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>   

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Sadique Puthen Peedikayil

2006-Sep-27 05:39 UTC

head link

Re: [Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

libxenstore.so is part of xen-libs package which you don''t need while 
compiling from src rpms.

If you are going to compile xen from source, you should have to install 
the libvirt rpm using --nodeps option and compile it.

rpm --install libvirt-0.0.6-1.i386.rpm --nodeps

shobha ranganathan wrote:> I download xen3.0.2-23.src.rpm and build the dom0 Kernel in Fedora 
> COre 5 in x86 mode. I did not build a domU kernel at all.
>  
> I tried to run ./xenguest-install.py in dom0 kernel after booting into 
> it.. I got this error
> "No module named libvirt".
>  
> I then tried installing libvirt-0.0.6-1.i386.rpm using
> "rpm --install libvirt-0.0.6-1.i386.rpm"
>  
> I get failed dependencies error such as
> "libxenstore.so is needed by libvirt-0.0.6-1.i386
> xen is needed by libvirt-0.0.6-1.i386"
>  
> what am I missing here ? I have libxenstore.so in /usr/lib.
>  
> thanks for your help
> Shobha
>
> ------------------------------------------------------------------------
> Stay in the know. Pulse on the new Yahoo.com. Check it out. 
> <http://us.rd.yahoo.com/evt=42974/*http://www.yahoo.com/preview>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Daniel P. Berrange

2006-Sep-27 12:25 UTC

head link

Re: [Xen-devel] Re: [Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

On Wed, Sep 27, 2006 at 11:09:51AM +0530, Sadique Puthen Peedikayil
wrote:> libxenstore.so is part of xen-libs package which you don''t need
while
> compiling from src rpms.
> 
> If you are going to compile xen from source, you should have to install 
> the libvirt rpm using --nodeps option and compile it.
> 
> rpm --install libvirt-0.0.6-1.i386.rpm --nodeps
No, there is absolutely *NO* need to install libvirt when compiling the
Xen RPM - there is no compile time dependancy, and you certainly should
not use --nodeps when installing RPMs.
> shobha ranganathan wrote:
> >I download xen3.0.2-23.src.rpm and build the dom0 Kernel in Fedora 
> >COre 5 in x86 mode. I did not build a domU kernel at all.
Did you install both xen & xen-libs ?
> >I tried to run ./xenguest-install.py in dom0 kernel after booting into 
> >it.. I got this error
> >"No module named libvirt".
> > 
> >I then tried installing libvirt-0.0.6-1.i386.rpm using
> >"rpm --install libvirt-0.0.6-1.i386.rpm"
> > 
> >I get failed dependencies error such as
> >"libxenstore.so is needed by libvirt-0.0.6-1.i386
> >xen is needed by libvirt-0.0.6-1.i386"
> > 
> >what am I missing here ? I have libxenstore.so in /usr/lib.
The version of Xen you installed  probably has a newer libxenstore.so
which includes versioning, while the libvirt you installed was linked
against the older non-versioned libxenstore.so. What does 

  rpm -q --provides xen xen-libs | grep xenstore

Show ?

BTW, you''ll also want libvirt-python RPM too

Regards,
Dan.
-- 
|=- Red Hat, Engineering, Emerging Technologies, Boston.  +1 978 392 2496 -=|
|=-           Perl modules: http://search.cpan.org/~danberr/              -=|
|=-               Projects: http://freshmeat.net/~danielpb/               -=|
|=-  GnuPG: 7D3B9505   F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505  -=| 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

shobha ranganathan

2006-Sep-27 16:35 UTC

head link

Re: [Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

1. Did you install both xen & xen-libs ?
       I picked xen-3.0.2-23.src.rpm as it was the Xen version supported in FC5.
       I did "make world" and "make install". Ofcourse I
created the ramdisk images as well. So I did not specifically install xen-libs.
Please let me know if I missed any steps.
   
  2. rpm -q --provides xen xen-libs | grep xenstore -- Show ?
     I tried this .This shows me nothing.  libvirt-0.0.6-1.i386 is the version
that is available on the FC5 package/Cds.
   
  My question ---  what is the right Xen source for FC5 in x86 and FC6 Test 1 in
x86?
  From my search, I found they use the same xen-3.0.2-23.src.rpm.
  I can pick them and build it. I have been downloading stuff from the right
websites. But I still get mismatches like these.
   
  thanks for all your help
  Shobha


"Daniel P. Berrange" <berrange@redhat.com> wrote:
  On Wed, Sep 27, 2006 at 11:09:51AM +0530, Sadique Puthen Peedikayil
wrote:> libxenstore.so is part of xen-libs package which you don''t need
while
> compiling from src rpms.
> 
> If you are going to compile xen from source, you should have to install 
> the libvirt rpm using --nodeps option and compile it.
> 
> rpm --install libvirt-0.0.6-1.i386.rpm --nodeps
No, there is absolutely *NO* need to install libvirt when compiling the
Xen RPM - there is no compile time dependancy, and you certainly should
not use --nodeps when installing RPMs.
> shobha ranganathan wrote:
> >I download xen3.0.2-23.src.rpm and build the dom0 Kernel in Fedora 
> >COre 5 in x86 mode. I did not build a domU kernel at all.
Did you install both xen & xen-libs ?
> >I tried to run ./xenguest-install.py in dom0 kernel after booting into 
> >it.. I got this error
> >"No module named libvirt".
> > 
> >I then tried installing libvirt-0.0.6-1.i386.rpm using
> >"rpm --install libvirt-0.0.6-1.i386.rpm"
> > 
> >I get failed dependencies error such as
> >"libxenstore.so is needed by libvirt-0.0.6-1.i386
> >xen is needed by libvirt-0.0.6-1.i386"
> > 
> >what am I missing here ? I have libxenstore.so in /usr/lib.
The version of Xen you installed probably has a newer libxenstore.so
which includes versioning, while the libvirt you installed was linked
against the older non-versioned libxenstore.so. What does 

rpm -q --provides xen xen-libs | grep xenstore

Show ?

BTW, you''ll also want libvirt-python RPM too

Regards,
Dan.
-- 
|=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=|
|=- Perl modules: http://search.cpan.org/~danberr/ -=|
|=- Projects: http://freshmeat.net/~danielpb/ -=|
|=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=| 


 				
---------------------------------
Want to be your own boss? Learn how on  Yahoo! Small Business. 

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Daniel P. Berrange

2006-Sep-27 16:40 UTC

head link

Re: [Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

On Wed, Sep 27, 2006 at 09:35:11AM -0700, shobha ranganathan
wrote:> 1. Did you install both xen & xen-libs ?
>        I picked xen-3.0.2-23.src.rpm as it was the Xen version supported in
FC5.
>        I did "make world" and "make install". Ofcourse
I created the ramdisk images as well. So I did not specifically install
xen-libs. Please let me know if I missed any steps.
>    
>   2. rpm -q --provides xen xen-libs | grep xenstore -- Show ?
>      I tried this .This shows me nothing.  libvirt-0.0.6-1.i386 is the
version that is available on the FC5 package/Cds.
>    
>   My question ---  what is the right Xen source for FC5 in x86 and FC6 Test
1 in x86?
FC6test1 is pretty old by  now - you should move up to test3, or even rawhide.

Sources for test3 are here:

 
http://download.fedora.devel.redhat.com/pub/fedora/linux/core/test/5.92/source/SRPMS/

Sources for rawhide are here:

http://download.fedora.devel.redhat.com/pub/fedora/linux/core/development/source/SRPMS/

For FC5, you don''t want to use the GA bits - get the latest published
errata
instead:

  http://download.fedora.devel.redhat.com/pub/fedora/linux/core/updates/5/SRPMS/

Dan
-- 
|=- Red Hat, Engineering, Emerging Technologies, Boston.  +1 978 392 2496 -=|
|=-           Perl modules: http://search.cpan.org/~danberr/              -=|
|=-               Projects: http://freshmeat.net/~danielpb/               -=|
|=-  GnuPG: 7D3B9505   F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505  -=| 

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Daniel P. Berrange

2006-Sep-27 16:51 UTC

head link

Re: [Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

On Wed, Sep 27, 2006 at 05:40:41PM +0100, Daniel P. Berrange
wrote:> On Wed, Sep 27, 2006 at 09:35:11AM -0700, shobha ranganathan wrote:
> > 1. Did you install both xen & xen-libs ?
> >        I picked xen-3.0.2-23.src.rpm as it was the Xen version
supported in FC5.
> >        I did "make world" and "make install".
Ofcourse I created the ramdisk images as well. So I did not specifically install
xen-libs. Please let me know if I missed any steps.
> >    
> >   2. rpm -q --provides xen xen-libs | grep xenstore -- Show ?
> >      I tried this .This shows me nothing.  libvirt-0.0.6-1.i386 is the
version that is available on the FC5 package/Cds.
> >    
> >   My question ---  what is the right Xen source for FC5 in x86 and FC6
Test 1 in x86?
Opps, got all those URLs wrong - remove the ''.devel'' bit of
the hostname ..
> FC6test1 is pretty old by  now - you should move up to test3, or even
rawhide.
> 
> Sources for test3 are here:
> 
>  
http://download.fedora.devel.redhat.com/pub/fedora/linux/core/test/5.92/source/SRPMS/
  http://download.fedora.redhat.com/pub/fedora/linux/core/test/5.92/source/SRPMS
> Sources for rawhide are here:
> 
>
http://download.fedora.devel.redhat.com/pub/fedora/linux/core/development/source/SRPMS/
 
http://download.fedora.redhat.com/pub/fedora/linux/core/development/source/SRPMS/
> 
> For FC5, you don''t want to use the GA bits - get the latest
published errata
> instead:
> 
>  
http://download.fedora.devel.redhat.com/pub/fedora/linux/core/updates/5/SRPMS/
  http://download.fedora.redhat.com/pub/fedora/linux/core/updates/5/SRPMS/

Dan.
-- 
|=- Red Hat, Engineering, Emerging Technologies, Boston.  +1 978 392 2496 -=|
|=-           Perl modules: http://search.cpan.org/~danberr/              -=|
|=-               Projects: http://freshmeat.net/~danielpb/               -=|
|=-  GnuPG: 7D3B9505   F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505  -=| 

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Xen devel - Sep 2006 - xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

[Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

[Xen-users] Re: [Xen-devel] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

Re: [Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

Re: [Xen-devel] Re: [Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

Re: [Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

Re: [Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode

Re: [Xen-users] xenguest-install.py reports "no module named libvirt" in FC5 x86 mode