thr3ads.net - Xen devel - RE: [Xen-devel] [PATCH 0/6] xen, xend, tools: Add NUMA support to Xen Issues on the ES7000 [Aug 2006]

If this information is useful, please help other people find it:
Share via:

Subrahmanian, Raj

2006-Aug-16 23:32 UTC

RE: [Xen-devel] [PATCH 0/6] xen, xend, tools: Add NUMA support to Xen Issues on the ES7000

Ryan,
I put in the NUMA patches 1-6 on changeset 10946 (the patches wouldn''t
apply cleanly on the current tip). I ran with both 1 cell and 2 cells. 
I have attached the complete output.
I got the heap and the numa info before and after running xm top (which
slowed the system down dramatically as mentioned previously).
http://lists.xensource.com/archives/html/xen-devel/2006-08/msg00348.html
As mentioned previously, the system does not die (I can get the debug
info, I can ping etc). But the system slows down dramatically, so
ssh-ing into the box is impossible.
Let me know what else I can try out/look at etc.

Thanks
Raj Subrahmanian
Xen Development 
Unisys Corp.

Heap and NUMA info on 1 cell machine
(XEN) *** Serial input -> Xen (type ''CTRL-a'' three times to
switch input
to DOM0).
(XEN) ''H'' pressed -> dumping heap info (now-0x25:DD4F40A6)
(XEN) heap[0][0][2]-> 4 pages
(XEN) heap[0][0][3]-> 8 pages
(XEN) heap[0][0][5]-> 64 pages
(XEN) heap[0][0][6]-> 128 pages
(XEN) heap[0][0][7]-> 256 pages
(XEN) heap[0][0][8]-> 256 pages
(XEN) heap[0][0][9]-> 512 pages
(XEN) heap[0][0][10]-> 2048 pages
(XEN) heap[1][0][0]-> 9 pages
(XEN) heap[1][0][1]-> 10 pages
(XEN) heap[1][0][2]-> 16 pages
(XEN) heap[1][0][3]-> 24 pages
(XEN) heap[1][0][4]-> 48 pages
(XEN) heap[1][0][5]-> 96 pages
(XEN) heap[1][0][6]-> 192 pages
(XEN) heap[1][0][7]-> 384 pages
(XEN) heap[1][0][8]-> 256 pages
(XEN) heap[1][0][10]-> 2048 pages
(XEN) heap[1][0][11]-> 6144 pages
(XEN) heap[1][0][12]-> 4096 pages
(XEN) heap[1][0][13]-> 8192 pages
(XEN) heap[1][0][14]-> 16384 pages
(XEN) heap[1][0][16]-> 65536 pages
(XEN) heap[1][0][18]-> 262144 pages
(XEN) heap[1][0][20]-> 7340032 pages
(XEN) heap[2][0][0]-> 1 pages
(XEN) heap[2][0][1]-> 2 pages
(XEN) heap[2][0][2]-> 4 pages
(XEN) heap[2][0][3]-> 8 pages
(XEN) heap[2][0][4]-> 16 pages
(XEN) heap[2][0][5]-> 32 pages
(XEN) heap[2][0][6]-> 64 pages
(XEN) heap[2][0][7]-> 128 pages
(XEN) heap[2][0][10]-> 1024 pages
(XEN) heap[2][0][11]-> 2048 pages
(XEN) heap[2][0][12]-> 4096 pages
(XEN) heap[2][0][14]-> 16384 pages
(XEN) heap[2][0][17]-> 131072 pages
(XEN) heap[2][0][18]-> 262144 pages
(XEN) ''u'' pressed -> dumping numa info (now-0x27:323BB0A0)
(XEN) idx0 -> NODE0 start->0 size->8421376
(XEN) phys_to_nid(1000) -> 0 should be 0
(XEN) CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0

After xm top was run.


(XEN) ''H'' pressed -> dumping heap info (now-0x44:A96C25DA)
(XEN) heap[0][0][2]-> 4 pages
(XEN) heap[0][0][3]-> 8 pages
(XEN) heap[0][0][5]-> 64 pages
(XEN) heap[0][0][6]-> 128 pages
(XEN) heap[0][0][7]-> 256 pages
(XEN) heap[0][0][8]-> 256 pages
(XEN) heap[0][0][9]-> 512 pages
(XEN) heap[0][0][10]-> 2048 pages
(XEN) heap[1][0][0]-> 9 pages
(XEN) heap[1][0][1]-> 10 pages
(XEN) heap[1][0][2]-> 16 pages
(XEN) heap[1][0][3]-> 24 pages
(XEN) heap[1][0][4]-> 48 pages
(XEN) heap[1][0][5]-> 96 pages
(XEN) heap[1][0][6]-> 192 pages
(XEN) heap[1][0][7]-> 384 pages
(XEN) heap[1][0][8]-> 256 pages
(XEN) heap[1][0][10]-> 2048 pages
(XEN) heap[1][0][11]-> 6144 pages
(XEN) heap[1][0][12]-> 4096 pages
(XEN) heap[1][0][13]-> 8192 pages
(XEN) heap[1][0][14]-> 16384 pages
(XEN) heap[1][0][16]-> 65536 pages
(XEN) heap[1][0][18]-> 262144 pages
(XEN) heap[1][0][20]-> 7340032 pages
(XEN) heap[2][0][0]-> 1 pages
(XEN) heap[2][0][1]-> 2 pages
(XEN) heap[2][0][2]-> 4 pages
(XEN) heap[2][0][3]-> 8 pages
(XEN) heap[2][0][4]-> 16 pages
(XEN) heap[2][0][5]-> 32 pages
(XEN) heap[2][0][6]-> 64 pages
(XEN) heap[2][0][7]-> 128 pages
(XEN) heap[2][0][10]-> 1024 pages
(XEN) heap[2][0][11]-> 2048 pages
(XEN) heap[2][0][12]-> 4096 pages
(XEN) heap[2][0][14]-> 16384 pages
(XEN) heap[2][0][17]-> 131072 pages
(XEN) heap[2][0][18]-> 262144 pages
(XEN) ''u'' pressed -> dumping numa info (now-0x45:459C5251)
(XEN) idx0 -> NODE0 start->0 size->8421376
(XEN) phys_to_nid(1000) -> 0 should be 0
(XEN) CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0

Heap and NUMA info on a 2 cell machine.

(XEN) *** Serial input -> Xen (type ''CTRL-a'' three times to
switch input
to DOM0).
(XEN) ''H'' pressed -> dumping heap info (now-0xE6:DE5B7988)
(XEN) heap[0][1][0]-> 1 pages
(XEN) heap[0][1][4]-> 16 pages
(XEN) heap[0][1][6]-> 64 pages
(XEN) heap[0][1][7]-> 256 pages
(XEN) heap[0][1][8]-> 512 pages
(XEN) heap[0][1][9]-> 1024 pages
(XEN) heap[0][1][10]-> 1024 pages
(XEN) heap[1][0][0]-> 3 pages
(XEN) heap[1][0][1]-> 14 pages
(XEN) heap[1][0][2]-> 8 pages
(XEN) heap[1][0][3]-> 16 pages
(XEN) heap[1][0][4]-> 32 pages
(XEN) heap[1][0][5]-> 64 pages
(XEN) heap[1][0][6]-> 128 pages
(XEN) heap[1][0][7]-> 256 pages
(XEN) heap[1][0][8]-> 256 pages
(XEN) heap[1][0][10]-> 1024 pages
(XEN) heap[1][0][12]-> 4096 pages
(XEN) heap[1][0][13]-> 8192 pages
(XEN) heap[1][0][14]-> 16384 pages
(XEN) heap[1][0][16]-> 65536 pages
(XEN) heap[1][0][17]-> 131072 pages
(XEN) heap[1][0][18]-> 262144 pages
(XEN) heap[1][0][19]-> 524288 pages
(XEN) heap[1][0][20]-> 7340032 pages
(XEN) heap[1][1][0]-> 1 pages
(XEN) heap[1][1][1]-> 6 pages
(XEN) heap[1][1][2]-> 4 pages
(XEN) heap[1][1][3]-> 8 pages
(XEN) heap[1][1][4]-> 16 pages
(XEN) heap[1][1][5]-> 32 pages
(XEN) heap[1][1][6]-> 64 pages
(XEN) heap[1][1][7]-> 384 pages
(XEN) heap[1][1][8]-> 256 pages
(XEN) heap[1][1][9]-> 512 pages
(XEN) heap[1][1][10]-> 2048 pages
(XEN) heap[1][1][11]-> 4096 pages
(XEN) heap[1][1][12]-> 8192 pages
(XEN) heap[1][1][13]-> 8192 pages
(XEN) heap[1][1][15]-> 32768 pages
(XEN) heap[1][1][16]-> 65536 pages
(XEN) heap[1][1][18]-> 262144 pages
(XEN) heap[1][1][20]-> 7340032 pages
(XEN) heap[2][1][0]-> 1 pages
(XEN) heap[2][1][2]-> 4 pages
(XEN) heap[2][1][3]-> 8 pages
(XEN) heap[2][1][4]-> 16 pages
(XEN) heap[2][1][5]-> 64 pages
(XEN) heap[2][1][7]-> 128 pages
(XEN) heap[2][1][10]-> 1024 pages
(XEN) heap[2][1][11]-> 2048 pages
(XEN) heap[2][1][12]-> 4096 pages
(XEN) heap[2][1][16]-> 65536 pages
(XEN) heap[2][1][18]-> 262144 pages
(XEN) ''u'' pressed -> dumping numa info (now-0xE8:82FD3A45)
(XEN) idx0 -> NODE0 start->8421376 size->8388608
(XEN) phys_to_nid(808001000) -> 0 should be 0
(XEN) idx1 -> NODE1 start->0 size->8421376
(XEN) phys_to_nid(1000) -> 1 should be 1
(XEN) CPU0 -> NODE1
(XEN) CPU1 -> NODE1
(XEN) CPU2 -> NODE1
(XEN) CPU3 -> NODE1
(XEN) CPU4 -> NODE1
(XEN) CPU5 -> NODE1
(XEN) CPU6 -> NODE1
(XEN) CPU7 -> NODE1
(XEN) CPU8 -> NODE0
(XEN) CPU9 -> NODE0
(XEN) CPU10 -> NODE0
(XEN) CPU11 -> NODE0
(XEN) CPU12 -> NODE0
(XEN) CPU13 -> NODE0
(XEN) CPU14 -> NODE0
(XEN) CPU15 -> NODE0

After xm top was run

(XEN) ''H'' pressed -> dumping heap info (now-0xF4:3B96C943)
(XEN) heap[0][1][0]-> 1 pages
(XEN) heap[0][1][4]-> 16 pages
(XEN) heap[0][1][6]-> 64 pages
(XEN) heap[0][1][7]-> 256 pages
(XEN) heap[0][1][8]-> 512 pages
(XEN) heap[0][1][9]-> 1024 pages
(XEN) heap[0][1][10]-> 1024 pages
(XEN) heap[1][0][0]-> 3 pages
(XEN) heap[1][0][1]-> 14 pages
(XEN) heap[1][0][2]-> 8 pages
(XEN) heap[1][0][3]-> 16 pages
(XEN) heap[1][0][4]-> 32 pages
(XEN) heap[1][0][5]-> 64 pages
(XEN) heap[1][0][6]-> 128 pages
(XEN) heap[1][0][7]-> 256 pages
(XEN) heap[1][0][8]-> 256 pages
(XEN) heap[1][0][10]-> 1024 pages
(XEN) heap[1][0][12]-> 4096 pages
(XEN) heap[1][0][13]-> 8192 pages
(XEN) heap[1][0][14]-> 16384 pages
(XEN) heap[1][0][16]-> 65536 pages
(XEN) heap[1][0][17]-> 131072 pages
(XEN) heap[1][0][18]-> 262144 pages
(XEN) heap[1][0][19]-> 524288 pages
(XEN) heap[1][0][20]-> 7340032 pages
(XEN) heap[1][1][0]-> 3 pages
(XEN) heap[1][1][1]-> 4 pages
(XEN) heap[1][1][2]-> 4 pages
(XEN) heap[1][1][3]-> 8 pages
(XEN) heap[1][1][4]-> 16 pages
(XEN) heap[1][1][5]-> 32 pages
(XEN) heap[1][1][6]-> 64 pages
(XEN) heap[1][1][7]-> 384 pages
(XEN) heap[1][1][8]-> 256 pages
(XEN) heap[1][1][9]-> 512 pages
(XEN) heap[1][1][10]-> 2048 pages
(XEN) heap[1][1][11]-> 4096 pages
(XEN) heap[1][1][12]-> 8192 pages
(XEN) heap[1][1][13]-> 8192 pages
(XEN) heap[1][1][15]-> 32768 pages
(XEN) heap[1][1][16]-> 65536 pages
(XEN) heap[1][1][18]-> 262144 pages
(XEN) heap[1][1][20]-> 7340032 pages
(XEN) heap[2][1][0]-> 1 pages
(XEN) heap[2][1][2]-> 4 pages
(XEN) heap[2][1][3]-> 8 pages
(XEN) heap[2][1][4]-> 16 pages
(XEN) heap[2][1][5]-> 64 pages
(XEN) heap[2][1][7]-> 128 pages
(XEN) heap[2][1][10]-> 1024 pages
(XEN) heap[2][1][11]-> 2048 pages
(XEN) heap[2][1][12]-> 4096 pages
(XEN) heap[2][1][16]-> 65536 pages
(XEN) heap[2][1][18]-> 262144 pages
(XEN) ''u'' pressed -> dumping numa info (now-0xF5:BF1D64C7)
(XEN) idx0 -> NODE0 start->8421376 size->8388608
(XEN) phys_to_nid(808001000) -> 0 should be 0
(XEN) idx1 -> NODE1 start->0 size->8421376
(XEN) phys_to_nid(1000) -> 1 should be 1
(XEN) CPU0 -> NODE1
(XEN) CPU1 -> NODE1
(XEN) CPU2 -> NODE1
(XEN) CPU3 -> NODE1
(XEN) CPU4 -> NODE1
(XEN) CPU5 -> NODE1
(XEN) CPU6 -> NODE1
(XEN) CPU7 -> NODE1
(XEN) CPU8 -> NODE0
(XEN) CPU9 -> NODE0
(XEN) CPU10 -> NODE0
(XEN) CPU11 -> NODE0
(XEN) CPU12 -> NODE0
(XEN) CPU13 -> NODE0
(XEN) CPU14 -> NODE0
(XEN) CPU15 -> NODE0



 __  __            _____  ___                     _        _     _      
 \ \/ /___ _ __   |___ / / _ \    _   _ _ __  ___| |_ __ _| |__ | | ___ 
  \  // _ \ ''_ \    |_ \| | | |__| | | | ''_ \/ __| __/ _` |
''_ \| |/ _ \
  /  \  __/ | | |  ___) | |_| |__| |_| | | | \__ \ || (_| | |_) | |  __/
 /_/\_\___|_| |_| |____(_)___/    \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
                                                                        
 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 3.0-unstable (root@) (gcc version 4.1.0 (SUSE Linux)) Wed
Aug 16 10:07:00 EDT 2006
 Latest ChangeSet: Fri Aug 04 11:36:07 2006 +0100 10946:e1a2a8029e9f

(XEN) Command line: /boot/xen.gz com1=115200,8N1 console=vga,com1
dom0_mem=512M
(XEN) Physical RAM map:
(XEN)  0000000000000000 - 000000000009dc00 (usable)
(XEN)  000000000009dc00 - 00000000000a0000 (reserved)
(XEN)  00000000000ce000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 0000000002670000 (usable)
(XEN)  0000000002670000 - 00000000026d7000 (ACPI data)
(XEN)  00000000026d7000 - 0000000002700000 (ACPI NVS)
(XEN)  0000000002700000 - 00000000f0000000 (usable)
(XEN)  00000000f8000000 - 00000000fec00000 (reserved)
(XEN)  00000000fffc0000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000808000000 (usable)
(XEN) System RAM: 32639MB (33422388kB)
(XEN) ACPI: RSDP (v000 PTLTD                                 ) @
0x00000000000f8650
(XEN) ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x06040000) @
0x000000000267dfe3
(XEN) ACPI: FADT (v004 UNISYS ZORRO    0x06040000 PTL  0x00000008) @
0x00000000026d610c
(XEN) ACPI: OEM1 (v001 UNISYS   OEM1   0x06040000  LTP 0x06040000) @
0x00000000026d6200
(XEN) ACPI: OEM2 (v001 UNISYS   OEM2   0x06040000  LTP 0x06040000) @
0x00000000026d6230
(XEN) ACPI: WSPT (v001 UNISYS   WSPT   0x06040000  LTP 0x06040000) @
0x00000000026d6e2c
(XEN) ACPI: SRAT (v001 UNISYS   SRAT   0x06040000  LTP 0x06040000) @
0x00000000026d6e54
(XEN) ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x06040000) @
0x00000000026d6f14
(XEN) ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @
0x00000000026d6fb0
(XEN) ACPI: DSDT (v001  Intel  870 SMP 0x06040000 MSFT 0x02000001) @
0x0000000000000000
(XEN) SRAT: PXM 1 -> APIC 14 -> Node 0
(XEN) SRAT: PXM 1 -> APIC 8 -> Node 0
(XEN) SRAT: PXM 1 -> APIC 6 -> Node 0
(XEN) SRAT: PXM 1 -> APIC 0 -> Node 0
(XEN) SRAT: Node 0 PXM 1 0-100000
(XEN) SRAT: Node 0 PXM 1 0-808000000
(XEN) NUMA: Using 63 for the hash shift.
(XEN) Xen heap: 12MB (13304kB)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) found SMP MP-table at 000f8680
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: OEM1 (v001 UNISYS   OEM1   0x06040000  LTP 0x06040000) @
0x00000000026d6200
(XEN) ACPI: DSDT (v001  Intel  870 SMP 0x06040000 MSFT 0x02000001) @
0x0000000000000000
(XEN) Switched to APIC driver `es7000''.
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
(XEN) Processor #6 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x08] enabled)
(XEN) Processor #8 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0e] enabled)
(XEN) Processor #14 15:4 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec04000] gsi_base[72])
(XEN) IOAPIC[1]: apic_id 10, version 32, address 0xfec04000, GSI 72-95
(XEN) ACPI: IOAPIC (id[0x0b] address[0xfec05000] gsi_base[96])
(XEN) IOAPIC[2]: apic_id 11, version 32, address 0xfec05000, GSI 96-119
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Phys.  Using 3 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 3000.163 MHz processor.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU0: Thermal monitoring enabled
(XEN) CPU0: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) ES7000: Enabling APIC mode.
(XEN) Mapping cpu 0 to node 0
(XEN) Booting processor 1/6 eip 90000
(XEN) Initializing CPU#1
(XEN) Mapping cpu 1 to node 0
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU1: Thermal monitoring enabled
(XEN) CPU1: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 2/8 eip 90000
(XEN) Initializing CPU#2
(XEN) Mapping cpu 2 to node 0
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 2
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU2: Thermal monitoring enabled
(XEN) CPU2: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 3/14 eip 90000
(XEN) Initializing CPU#3
(XEN) Mapping cpu 3 to node 0
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 3
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU3: Thermal monitoring enabled
(XEN) CPU3: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
(XEN) checking TSC synchronization across 4 CPUs: 
(XEN) CPU#0 had -2 usecs TSC skew, fixed it up.
(XEN) Platform timer is 1.193MHz PIT
(XEN) CPU 0 APIC 0 -> Node 0
(XEN) CPU 1 APIC 6 -> Node 0
(XEN) CPU 2 APIC 8 -> Node 0
(XEN) CPU 3 APIC 14 -> Node 0
(XEN) Brought up 4 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000000f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000017000000->0000000018000000 (126976 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff80100000->ffffffff804b4f08
(XEN)  Init. ramdisk: ffffffff804b5000->ffffffff80b49a00
(XEN)  Phys-Mach map: ffffffff80b4a000->ffffffff80c4a000
(XEN)  Start info:    ffffffff80c4a000->ffffffff80c4b000
(XEN)  Page tables:   ffffffff80c4b000->ffffffff80c56000
(XEN)  Boot stack:    ffffffff80c56000->ffffffff80c57000
(XEN)  TOTAL:         ffffffff80000000->ffffffff81000000
(XEN)  ENTRY ADDRESS: ffffffff80100000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Initrd len 0x694a00, start at 0xffffffff804b5000
(XEN) Scrubbing Free RAM:
........................................................................
........................................................................
........................................................................
........................................................................
.........................................done.
(XEN) Xen trace buffers: disabled
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times
to switch
input to Xen).
kernel direct mapping tables up to 20800000 @ c56000-d5c000
Bootdata ok (command line is root=/dev/sda2 resume=/dev/sda1 showopts)
Linux version 2.6.16.13-xen (root@m1132-xenpreview) (gcc version 4.1.0
(SUSE Linux)) #1 SMP Wed Aug 16 10:25:14 EDT 2006
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000020800000 (usable)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0e] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec04000] gsi_base[72])
IOAPIC[1]: apic_id 10, version 32, address 0xfec04000, GSI 72-95
ACPI: IOAPIC (id[0x0b] address[0xfec05000] gsi_base[96])
IOAPIC[2]: apic_id 11, version 32, address 0xfec05000, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at f0800000 (gap: f0000000:8000000)
Built 1 zonelists
Kernel command line: root=/dev/sda2 resume=/dev/sda1 showopts
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
Xen reported: 3000.000 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Software IO TLB enabled: 
 Aperture:     64 megabytes
 Kernel range: 0xffff8800019ee000 - 0xffff8800059ee000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 435580k/532480k available (1898k kernel code, 88040k reserved,
808k data, 168k init)
Calibrating delay using timer specific routine.. 6002.84 BogoMIPS
(lpj=30014238)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Initializing CPU#1
Initializing CPU#2
Brought up 4 CPUs
Initializing CPU#3
migration_cost=1677
checking if image is initramfs... it is
Freeing initrd memory: 6738k freed
DMI present.
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: Device [MBDV] status [00000008]: functional but not present;
setting present
ACPI: PCI Root Bridge [MBDV] (0000:ff)
ACPI: PCI Root Bridge [S0H0] (0000:00)
PCI quirk: region 0d00-0d7f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0e80-0ebf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *6 10 11 14 15)
ACPI: PCI Root Bridge [S0H2] (0000:0f)
PCI: Enable I/O Space to 1 KB Granularity
PCI: Enable I/O Space to 1 KB Granularity
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn''t work, try "pci=routeirq".  If it
helps, post a
report
PCI: Bridge: 0000:00:1e.0
  IO window: 1000-1fff
  MEM window: f6000000-f7efffff
  PREFETCH window: f0800000-f08fffff
PCI: Bridge: 0000:0f:1d.0
  IO window: 2000-23ff
  MEM window: f4f00000-f4ffffff
  PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:100000@f4000000 for 0000:16:01.1
PCI: Bridge: 0000:0f:1f.0
  IO window: 2400-27ff
  MEM window: f4d00000-f4efffff
  PREFETCH window: f3e00000-f3ffffff
IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1155727957.882:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
isa bounce pool size: 16 pages
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
blkif_init: reqs=64, pages=704, mmap_vstart=0xffff88001f400000
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NET: Registered protocol family 17
scsi_mod: no version for "struct_module" found: kernel tainted.
SCSI subsystem initialized
ICH4: IDE controller at PCI slot 0000:00:1f.1
GSI 16 sharing vector 0x98 and IRQ 16
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x0880-0x0887, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x0888-0x088f, BIOS settings: hdc:pio, hdd:pio
hda: TOSHIBA CD/DVDW SD-R6472, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.07
GSI 17 sharing vector 0xA0 and IRQ 17
ACPI: PCI Interrupt 0000:16:01.0[A] -> GSI 96 (level, low) -> IRQ 17
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=17
  Vendor: UNISYS    Model: 018200MAG3182LC   Rev: 0610
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 35694860 512-byte hdwr sectors (18276 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
SCSI device sda: 35694860 512-byte hdwr sectors (18276 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
  Vendor: UNISYS    Model: 007114ST39102LC   Rev: B603
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sdb: 17916935 512-byte hdwr sectors (9173 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 17916935 512-byte hdwr sectors (9173 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back w/ FUA
 sdb: sdb1 sdb2
sd 0:0:1:0: Attached scsi disk sdb
sd 0:0:1:0: Attached scsi generic sg1 type 0
GSI 18 sharing vector 0xA8 and IRQ 18
ACPI: PCI Interrupt 0000:16:01.1[B] -> GSI 97 (level, low) -> IRQ 18
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=18
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
ReiserFS: sda2: Removing [39443 104114 0x0 SD]..done
ReiserFS: sda2: There were 1 uncompleted unlinks/truncates. Completed
Adding 2104472k swap on /dev/sda1.  Priority:-1 extents:1
across:2104472k
Intel(R) PRO/1000 Network Driver - version 6.3.9-k4-NAPI
Copyright (c) 1999-2005 Intel Corporation.
GSI 19 sharing vector 0xB0 and IRQ 19
ACPI: PCI Interrupt 0000:10:01.0[A] -> GSI 72 (level, low) -> IRQ 19
e1000: 0000:10:01.0: e1000_probe: (PCI-X:133MHz:64-bit)
08:00:0b:1e:19:98
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 20 sharing vector 0xB8 and IRQ 20
ACPI: PCI Interrupt 0000:10:01.1[B] -> GSI 73 (level, low) -> IRQ 20
e1000: 0000:10:01.1: e1000_probe: (PCI-X:133MHz:64-bit)
08:00:0b:1e:19:99
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
ACPI: Power Button (FF) [PWRF]
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
(XEN) *** Serial input -> Xen (type ''CTRL-a'' three times to
switch input
to DOM0).
(XEN) ''H'' pressed -> dumping heap info (now-0x25:DD4F40A6)
(XEN) heap[0][0][2]-> 4 pages
(XEN) heap[0][0][3]-> 8 pages
(XEN) heap[0][0][5]-> 64 pages
(XEN) heap[0][0][6]-> 128 pages
(XEN) heap[0][0][7]-> 256 pages
(XEN) heap[0][0][8]-> 256 pages
(XEN) heap[0][0][9]-> 512 pages
(XEN) heap[0][0][10]-> 2048 pages
(XEN) heap[1][0][0]-> 9 pages
(XEN) heap[1][0][1]-> 10 pages
(XEN) heap[1][0][2]-> 16 pages
(XEN) heap[1][0][3]-> 24 pages
(XEN) heap[1][0][4]-> 48 pages
(XEN) heap[1][0][5]-> 96 pages
(XEN) heap[1][0][6]-> 192 pages
(XEN) heap[1][0][7]-> 384 pages
(XEN) heap[1][0][8]-> 256 pages
(XEN) heap[1][0][10]-> 2048 pages
(XEN) heap[1][0][11]-> 6144 pages
(XEN) heap[1][0][12]-> 4096 pages
(XEN) heap[1][0][13]-> 8192 pages
(XEN) heap[1][0][14]-> 16384 pages
(XEN) heap[1][0][16]-> 65536 pages
(XEN) heap[1][0][18]-> 262144 pages
(XEN) heap[1][0][20]-> 7340032 pages
(XEN) heap[2][0][0]-> 1 pages
(XEN) heap[2][0][1]-> 2 pages
(XEN) heap[2][0][2]-> 4 pages
(XEN) heap[2][0][3]-> 8 pages
(XEN) heap[2][0][4]-> 16 pages
(XEN) heap[2][0][5]-> 32 pages
(XEN) heap[2][0][6]-> 64 pages
(XEN) heap[2][0][7]-> 128 pages
(XEN) heap[2][0][10]-> 1024 pages
(XEN) heap[2][0][11]-> 2048 pages
(XEN) heap[2][0][12]-> 4096 pages
(XEN) heap[2][0][14]-> 16384 pages
(XEN) heap[2][0][17]-> 131072 pages
(XEN) heap[2][0][18]-> 262144 pages
(XEN) ''u'' pressed -> dumping numa info (now-0x27:323BB0A0)
(XEN) idx0 -> NODE0 start->0 size->8421376
(XEN) phys_to_nid(1000) -> 0 should be 0
(XEN) CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0
(XEN) ''H'' pressed -> dumping heap info (now-0x44:A96C25DA)
(XEN) heap[0][0][2]-> 4 pages
(XEN) heap[0][0][3]-> 8 pages
(XEN) heap[0][0][5]-> 64 pages
(XEN) heap[0][0][6]-> 128 pages
(XEN) heap[0][0][7]-> 256 pages
(XEN) heap[0][0][8]-> 256 pages
(XEN) heap[0][0][9]-> 512 pages
(XEN) heap[0][0][10]-> 2048 pages
(XEN) heap[1][0][0]-> 9 pages
(XEN) heap[1][0][1]-> 10 pages
(XEN) heap[1][0][2]-> 16 pages
(XEN) heap[1][0][3]-> 24 pages
(XEN) heap[1][0][4]-> 48 pages
(XEN) heap[1][0][5]-> 96 pages
(XEN) heap[1][0][6]-> 192 pages
(XEN) heap[1][0][7]-> 384 pages
(XEN) heap[1][0][8]-> 256 pages
(XEN) heap[1][0][10]-> 2048 pages
(XEN) heap[1][0][11]-> 6144 pages
(XEN) heap[1][0][12]-> 4096 pages
(XEN) heap[1][0][13]-> 8192 pages
(XEN) heap[1][0][14]-> 16384 pages
(XEN) heap[1][0][16]-> 65536 pages
(XEN) heap[1][0][18]-> 262144 pages
(XEN) heap[1][0][20]-> 7340032 pages
(XEN) heap[2][0][0]-> 1 pages
(XEN) heap[2][0][1]-> 2 pages
(XEN) heap[2][0][2]-> 4 pages
(XEN) heap[2][0][3]-> 8 pages
(XEN) heap[2][0][4]-> 16 pages
(XEN) heap[2][0][5]-> 32 pages
(XEN) heap[2][0][6]-> 64 pages
(XEN) heap[2][0][7]-> 128 pages
(XEN) heap[2][0][10]-> 1024 pages
(XEN) heap[2][0][11]-> 2048 pages
(XEN) heap[2][0][12]-> 4096 pages
(XEN) heap[2][0][14]-> 16384 pages
(XEN) heap[2][0][17]-> 131072 pages
(XEN) heap[2][0][18]-> 262144 pages
(XEN) ''u'' pressed -> dumping numa info (now-0x45:459C5251)
(XEN) idx0 -> NODE0 start->0 size->8421376
(XEN) phys_to_nid(1000) -> 0 should be 0
(XEN) CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0

Press any key to continue.

 __  __            _____  ___                     _        _     _      
 \ \/ /___ _ __   |___ / / _ \    _   _ _ __  ___| |_ __ _| |__ | | ___ 
  \  // _ \ ''_ \    |_ \| | | |__| | | | ''_ \/ __| __/ _` |
''_ \| |/ _ \
  /  \  __/ | | |  ___) | |_| |__| |_| | | | \__ \ || (_| | |_) | |  __/
 /_/\_\___|_| |_| |____(_)___/    \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
                                                                        
 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 3.0-unstable (root@) (gcc version 4.1.0 (SUSE Linux)) Wed
Aug 16 10:07:00 EDT 2006
 Latest ChangeSet: Fri Aug 04 11:36:07 2006 +0100 10946:e1a2a8029e9f

(XEN) Command line: /boot/xen.gz com1=115200,8N1 console=vga,com1
dom0_mem=512M
(XEN) Physical RAM map:
(XEN)  0000000000000000 - 000000000009dc00 (usable)
(XEN)  000000000009dc00 - 00000000000a0000 (reserved)
(XEN)  00000000000ce000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 0000000002670000 (usable)
(XEN)  0000000002670000 - 00000000026d7000 (ACPI data)
(XEN)  00000000026d7000 - 0000000002700000 (ACPI NVS)
(XEN)  0000000002700000 - 00000000f0000000 (usable)
(XEN)  00000000f8000000 - 00000000fec00000 (reserved)
(XEN)  00000000fffc0000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000001008000000 (usable)
(XEN) System RAM: 65407MB (66976820kB)
(XEN) ACPI: RSDP (v000 PTLTD                                 ) @
0x00000000000f8650
(XEN) ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x06040000) @
0x000000000267de53
(XEN) ACPI: FADT (v004 UNISYS ZORRO    0x06040000 PTL  0x00000008) @
0x00000000026d5f7c
(XEN) ACPI: OEM1 (v001 UNISYS   OEM1   0x06040000  LTP 0x06040000) @
0x00000000026d6070
(XEN) ACPI: OEM2 (v001 UNISYS   OEM2   0x06040000  LTP 0x06040000) @
0x00000000026d60a0
(XEN) ACPI: WSPT (v001 UNISYS   WSPT   0x06040000  LTP 0x06040000) @
0x00000000026d6c9c
(XEN) ACPI: SRAT (v001 UNISYS   SRAT   0x06040000  LTP 0x06040000) @
0x00000000026d6cc4
(XEN) ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x06040000) @
0x00000000026d6e6c
(XEN) ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @
0x00000000026d6fb0
(XEN) ACPI: DSDT (v001  Intel  870 SMP 0x06040000 MSFT 0x02000001) @
0x0000000000000000
(XEN) SRAT: PXM 3 -> APIC 60 -> Node 0
(XEN) SRAT: PXM 3 -> APIC 58 -> Node 0
(XEN) SRAT: PXM 3 -> APIC 52 -> Node 0
(XEN) SRAT: PXM 3 -> APIC 50 -> Node 0
(XEN) SRAT: PXM 3 -> APIC 62 -> Node 0
(XEN) SRAT: PXM 3 -> APIC 56 -> Node 0
(XEN) SRAT: PXM 3 -> APIC 54 -> Node 0
(XEN) SRAT: PXM 3 -> APIC 48 -> Node 0
(XEN) SRAT: PXM 1 -> APIC 12 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 10 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 4 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 2 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 14 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 8 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 6 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 0 -> Node 1
(XEN) SRAT: Node 1 PXM 1 0-100000
(XEN) SRAT: Node 1 PXM 1 0-808000000
(XEN) SRAT: Node 0 PXM 3 808000000-1008000000
(XEN) NUMA: Using 27 for the hash shift.
(XEN) Reserving non-aligned node boundary @ mfn 8421376
(XEN) Xen heap: 11MB (12280kB)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) found SMP MP-table at 000f8680
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: OEM1 (v001 UNISYS   OEM1   0x06040000  LTP 0x06040000) @
0x00000000026d6070
(XEN) ACPI: DSDT (v001  Intel  870 SMP 0x06040000 MSFT 0x02000001) @
0x0000000000000000
(XEN) Switched to APIC driver `es7000''.
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
(XEN) Processor #6 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x08] enabled)
(XEN) Processor #8 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0e] enabled)
(XEN) Processor #14 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
(XEN) Processor #2 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
(XEN) Processor #4 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled)
(XEN) Processor #10 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled)
(XEN) Processor #12 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x30] enabled)
(XEN) Processor #48 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x36] enabled)
(XEN) Processor #54 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x38] enabled)
(XEN) Processor #56 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x3e] enabled)
(XEN) Processor #62 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x32] enabled)
(XEN) Processor #50 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x34] enabled)
(XEN) Processor #52 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x3a] enabled)
(XEN) Processor #58 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x3c] enabled)
(XEN) Processor #60 15:4 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec04000] gsi_base[72])
(XEN) IOAPIC[1]: apic_id 10, version 32, address 0xfec04000, GSI 72-95
(XEN) ACPI: IOAPIC (id[0x0b] address[0xfec05000] gsi_base[96])
(XEN) IOAPIC[2]: apic_id 11, version 32, address 0xfec05000, GSI 96-119
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Phys.  Using 3 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 3000.166 MHz processor.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU0: Thermal monitoring enabled
(XEN) CPU0: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) ES7000: Enabling APIC mode.
(XEN) Mapping cpu 0 to node 1
(XEN) Booting processor 1/6 eip 90000
(XEN) Initializing CPU#1
(XEN) Mapping cpu 1 to node 1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU1: Thermal monitoring enabled
(XEN) CPU1: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 2/8 eip 90000
(XEN) Initializing CPU#2
(XEN) Mapping cpu 2 to node 1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 2
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU2: Thermal monitoring enabled
(XEN) CPU2: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 3/14 eip 90000
(XEN) Initializing CPU#3
(XEN) Mapping cpu 3 to node 1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 3
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU3: Thermal monitoring enabled
(XEN) CPU3: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 4/2 eip 90000
(XEN) Initializing CPU#4
(XEN) Mapping cpu 4 to node 1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#4.
(XEN) CPU4: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU4: Thermal monitoring enabled
(XEN) CPU4: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 5/4 eip 90000
(XEN) Initializing CPU#5
(XEN) Mapping cpu 5 to node 1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#5.
(XEN) CPU5: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU5: Thermal monitoring enabled
(XEN) CPU5: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 6/10 eip 90000
(XEN) Initializing CPU#6
(XEN) Mapping cpu 6 to node 1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 2
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#6.
(XEN) CPU6: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU6: Thermal monitoring enabled
(XEN) CPU6: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 7/12 eip 90000
(XEN) Initializing CPU#7
(XEN) Mapping cpu 7 to node 1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 3
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#7.
(XEN) CPU7: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU7: Thermal monitoring enabled
(XEN) CPU7: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 8/48 eip 90000
(XEN) Initializing CPU#8
(XEN) Mapping cpu 8 to node 0
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 12
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#8.
(XEN) CPU8: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU8: Thermal monitoring enabled
(XEN) CPU8: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 9/54 eip 90000
(XEN) Initializing CPU#9
(XEN) Mapping cpu 9 to node 0
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 13
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#9.
(XEN) CPU9: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU9: Thermal monitoring enabled
(XEN) CPU9: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 10/56 eip 90000
(XEN) Initializing CPU#10
(XEN) Mapping cpu 10 to node 0
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 14
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#10.
(XEN) CPU10: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU10: Thermal monitoring enabled
(XEN) CPU10: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 11/62 eip 90000
(XEN) Initializing CPU#11
(XEN) Mapping cpu 11 to node 0
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 15
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#11.
(XEN) CPU11: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU11: Thermal monitoring enabled
(XEN) CPU11: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 12/50 eip 90000
(XEN) Initializing CPU#12
(XEN) Mapping cpu 12 to node 0
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 12
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#12.
(XEN) CPU12: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU12: Thermal monitoring enabled
(XEN) CPU12: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 13/52 eip 90000
(XEN) Initializing CPU#13
(XEN) Mapping cpu 13 to node 0
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 13
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#13.
(XEN) CPU13: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU13: Thermal monitoring enabled
(XEN) CPU13: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 14/58 eip 90000
(XEN) Initializing CPU#14
(XEN) Mapping cpu 14 to node 0
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 14
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#14.
(XEN) CPU14: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU14: Thermal monitoring enabled
(XEN) CPU14: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 15/60 eip 90000
(XEN) Initializing CPU#15
(XEN) Mapping cpu 15 to node 0
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 15
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#15.
(XEN) CPU15: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU15: Thermal monitoring enabled
(XEN) CPU15: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Total of 16 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
(XEN) checking TSC synchronization across 16 CPUs: 
(XEN) CPU#0 had 658774 usecs TSC skew, fixed it up.
(XEN) CPU#1 had 658787 usecs TSC skew, fixed it up.
(XEN) CPU#2 had 658787 usecs TSC skew, fixed it up.
(XEN) CPU#3 had 658787 usecs TSC skew, fixed it up.
(XEN) CPU#4 had 658788 usecs TSC skew, fixed it up.
(XEN) CPU#5 had 658786 usecs TSC skew, fixed it up.
(XEN) CPU#6 had 658788 usecs TSC skew, fixed it up.
(XEN) CPU#7 had 658788 usecs TSC skew, fixed it up.
(XEN) CPU#8 had -658786 usecs TSC skew, fixed it up.
(XEN) CPU#9 had -658786 usecs TSC skew, fixed it up.
(XEN) CPU#10 had -658785 usecs TSC skew, fixed it up.
(XEN) CPU#11 had -658786 usecs TSC skew, fixed it up.
(XEN) CPU#12 had -658787 usecs TSC skew, fixed it up.
(XEN) CPU#13 had -658786 usecs TSC skew, fixed it up.
(XEN) CPU#14 had -658783 usecs TSC skew, fixed it up.
(XEN) CPU#15 had -658786 usecs TSC skew, fixed it up.
(XEN) Platform timer is 1.193MHz PIT
(XEN) CPU 0 APIC 0 -> Node 1
(XEN) CPU 1 APIC 6 -> Node 1
(XEN) CPU 2 APIC 8 -> Node 1
(XEN) CPU 3 APIC 14 -> Node 1
(XEN) CPU 4 APIC 2 -> Node 1
(XEN) CPU 5 APIC 4 -> Node 1
(XEN) CPU 6 APIC 10 -> Node 1
(XEN) CPU 7 APIC 12 -> Node 1
(XEN) CPU 8 APIC 48 -> Node 0
(XEN) CPU 9 APIC 54 -> Node 0
(XEN) CPU 10 APIC 56 -> Node 0
(XEN) CPU 11 APIC 62 -> Node 0
(XEN) CPU 12 APIC 50 -> Node 0
(XEN) CPU 13 APIC 52 -> Node 0
(XEN) CPU 14 APIC 58 -> Node 0
(XEN) CPU 15 APIC 60 -> Node 0
(XEN) Brought up 16 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000000f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   000000002b000000->000000002c000000 (126976 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff80100000->ffffffff804b4f08
(XEN)  Init. ramdisk: ffffffff804b5000->ffffffff80b49a00
(XEN)  Phys-Mach map: ffffffff80b4a000->ffffffff80c4a000
(XEN)  Start info:    ffffffff80c4a000->ffffffff80c4b000
(XEN)  Page tables:   ffffffff80c4b000->ffffffff80c56000
(XEN)  Boot stack:    ffffffff80c56000->ffffffff80c57000
(XEN)  TOTAL:         ffffffff80000000->ffffffff81000000
(XEN)  ENTRY ADDRESS: ffffffff80100000
(XEN) Dom0 has maximum 16 VCPUs
(XEN) Initrd len 0x694a00, start at 0xffffffff804b5000
(XEN) Scrubbing Free RAM:
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
.........done.
(XEN) Xen trace buffers: disabled
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times
to switch
input to Xen).
kernel direct mapping tables up to 20800000 @ c56000-d5c000
Bootdata ok (command line is root=/dev/sda2 resume=/dev/sda1 showopts)
Linux version 2.6.16.13-xen (root@m1132-xenpreview) (gcc version 4.1.0
(SUSE Linux)) #1 SMP Wed Aug 16 10:25:14 EDT 2006
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000020800000 (usable)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x36] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x38] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x3e] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x3a] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x3c] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec04000] gsi_base[72])
IOAPIC[1]: apic_id 10, version 32, address 0xfec04000, GSI 72-95
ACPI: IOAPIC (id[0x0b] address[0xfec05000] gsi_base[96])
IOAPIC[2]: apic_id 11, version 32, address 0xfec05000, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at f0800000 (gap: f0000000:8000000)
Built 1 zonelists
Kernel command line: root=/dev/sda2 resume=/dev/sda1 showopts
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
Xen reported: 3000.006 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Software IO TLB enabled: 
 Aperture:     64 megabytes
 Kernel range: 0xffff880001a4e000 - 0xffff880005a4e000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 435200k/532480k available (1898k kernel code, 88424k reserved,
808k data, 168k init)
Calibrating delay using timer specific routine.. 6005.16 BogoMIPS
(lpj=30025822)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Initializing CPU#1
Initializing CPU#2
Initializing CPU#3
Initializing CPU#4
Initializing CPU#5
Initializing CPU#6
Initializing CPU#7
Initializing CPU#8
Initializing CPU#9
Initializing CPU#10
Initializing CPU#11
Initializing CPU#12
Initializing CPU#13
Initializing CPU#14
Brought up 16 CPUs
Initializing CPU#15
migration_cost=1643
checking if image is initramfs... it is
Freeing initrd memory: 6738k freed
DMI present.
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: Device [MBDV] status [00000008]: functional but not present;
setting present
ACPI: PCI Root Bridge [MBDV] (0000:ff)
ACPI: PCI Root Bridge [S0H0] (0000:00)
PCI quirk: region 0d00-0d7f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0e80-0ebf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *6 10 11 14 15)
ACPI: PCI Root Bridge [S0H2] (0000:0f)
PCI: Enable I/O Space to 1 KB Granularity
PCI: Enable I/O Space to 1 KB Granularity
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn''t work, try "pci=routeirq".  If it
helps, post a
report
PCI: Bridge: 0000:00:1e.0
  IO window: 1000-1fff
  MEM window: f6000000-f7efffff
  PREFETCH window: f0800000-f08fffff
PCI: Bridge: 0000:0f:1d.0
  IO window: 2000-23ff
  MEM window: f4f00000-f4ffffff
  PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:100000@f4000000 for 0000:16:01.1
PCI: Bridge: 0000:0f:1f.0
  IO window: 2400-27ff
  MEM window: f4d00000-f4efffff
  PREFETCH window: f3e00000-f3ffffff
IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1155729319.678:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
isa bounce pool size: 16 pages
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
blkif_init: reqs=64, pages=704, mmap_vstart=0xffff88001f000000
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NET: Registered protocol family 17
scsi_mod: no version for "struct_module" found: kernel tainted.
SCSI subsystem initialized
ICH4: IDE controller at PCI slot 0000:00:1f.1
GSI 16 sharing vector 0x98 and IRQ 16
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x0880-0x0887, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x0888-0x088f, BIOS settings: hdc:pio, hdd:pio
hda: TOSHIBA CD/DVDW SD-R6472, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.07
GSI 17 sharing vector 0xA0 and IRQ 17
ACPI: PCI Interrupt 0000:16:01.0[A] -> GSI 96 (level, low) -> IRQ 17
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=17
  Vendor: UNISYS    Model: 018200MAG3182LC   Rev: 0610
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 35694860 512-byte hdwr sectors (18276 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
SCSI device sda: 35694860 512-byte hdwr sectors (18276 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
  Vendor: UNISYS    Model: 007114ST39102LC   Rev: B603
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sdb: 17916935 512-byte hdwr sectors (9173 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 17916935 512-byte hdwr sectors (9173 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back w/ FUA
 sdb: sdb1 sdb2
sd 0:0:1:0: Attached scsi disk sdb
sd 0:0:1:0: Attached scsi generic sg1 type 0
GSI 18 sharing vector 0xA8 and IRQ 18
ACPI: PCI Interrupt 0000:16:01.1[B] -> GSI 97 (level, low) -> IRQ 18
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=18
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
ReiserFS: sda2: Removing [39443 104110 0x0 SD]..done
ReiserFS: sda2: There were 1 uncompleted unlinks/truncates. Completed
Adding 2104472k swap on /dev/sda1.  Priority:-1 extents:1
across:2104472k
Intel(R) PRO/1000 Network Driver - version 6.3.9-k4-NAPI
Copyright (c) 1999-2005 Intel Corporation.
GSI 19 sharing vector 0xB0 and IRQ 19
ACPI: PCI Interrupt 0000:10:01.0[A] -> GSI 72 (level, low) -> IRQ 19
e1000: 0000:10:01.0: e1000_probe: (PCI-X:133MHz:64-bit)
08:00:0b:1e:19:98
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 20 sharing vector 0xB8 and IRQ 20
ACPI: PCI Interrupt 0000:10:01.1[B] -> GSI 73 (level, low) -> IRQ 20
e1000: 0000:10:01.1: e1000_probe: (PCI-X:133MHz:64-bit)
08:00:0b:1e:19:99
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
ACPI: Power Button (FF) [PWRF]
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
[-- MARK -- Wed Aug 16 12:00:00 2006]
(XEN) *** Serial input -> Xen (type ''CTRL-a'' three times to
switch input
to DOM0).
(XEN) ''H'' pressed -> dumping heap info (now-0xE6:DE5B7988)
(XEN) heap[0][1][0]-> 1 pages
(XEN) heap[0][1][4]-> 16 pages
(XEN) heap[0][1][6]-> 64 pages
(XEN) heap[0][1][7]-> 256 pages
(XEN) heap[0][1][8]-> 512 pages
(XEN) heap[0][1][9]-> 1024 pages
(XEN) heap[0][1][10]-> 1024 pages
(XEN) heap[1][0][0]-> 3 pages
(XEN) heap[1][0][1]-> 14 pages
(XEN) heap[1][0][2]-> 8 pages
(XEN) heap[1][0][3]-> 16 pages
(XEN) heap[1][0][4]-> 32 pages
(XEN) heap[1][0][5]-> 64 pages
(XEN) heap[1][0][6]-> 128 pages
(XEN) heap[1][0][7]-> 256 pages
(XEN) heap[1][0][8]-> 256 pages
(XEN) heap[1][0][10]-> 1024 pages
(XEN) heap[1][0][12]-> 4096 pages
(XEN) heap[1][0][13]-> 8192 pages
(XEN) heap[1][0][14]-> 16384 pages
(XEN) heap[1][0][16]-> 65536 pages
(XEN) heap[1][0][17]-> 131072 pages
(XEN) heap[1][0][18]-> 262144 pages
(XEN) heap[1][0][19]-> 524288 pages
(XEN) heap[1][0][20]-> 7340032 pages
(XEN) heap[1][1][0]-> 1 pages
(XEN) heap[1][1][1]-> 6 pages
(XEN) heap[1][1][2]-> 4 pages
(XEN) heap[1][1][3]-> 8 pages
(XEN) heap[1][1][4]-> 16 pages
(XEN) heap[1][1][5]-> 32 pages
(XEN) heap[1][1][6]-> 64 pages
(XEN) heap[1][1][7]-> 384 pages
(XEN) heap[1][1][8]-> 256 pages
(XEN) heap[1][1][9]-> 512 pages
(XEN) heap[1][1][10]-> 2048 pages
(XEN) heap[1][1][11]-> 4096 pages
(XEN) heap[1][1][12]-> 8192 pages
(XEN) heap[1][1][13]-> 8192 pages
(XEN) heap[1][1][15]-> 32768 pages
(XEN) heap[1][1][16]-> 65536 pages
(XEN) heap[1][1][18]-> 262144 pages
(XEN) heap[1][1][20]-> 7340032 pages
(XEN) heap[2][1][0]-> 1 pages
(XEN) heap[2][1][2]-> 4 pages
(XEN) heap[2][1][3]-> 8 pages
(XEN) heap[2][1][4]-> 16 pages
(XEN) heap[2][1][5]-> 64 pages
(XEN) heap[2][1][7]-> 128 pages
(XEN) heap[2][1][10]-> 1024 pages
(XEN) heap[2][1][11]-> 2048 pages
(XEN) heap[2][1][12]-> 4096 pages
(XEN) heap[2][1][16]-> 65536 pages
(XEN) heap[2][1][18]-> 262144 pages
(XEN) ''u'' pressed -> dumping numa info (now-0xE8:82FD3A45)
(XEN) idx0 -> NODE0 start->8421376 size->8388608
(XEN) phys_to_nid(808001000) -> 0 should be 0
(XEN) idx1 -> NODE1 start->0 size->8421376
(XEN) phys_to_nid(1000) -> 1 should be 1
(XEN) CPU0 -> NODE1
(XEN) CPU1 -> NODE1
(XEN) CPU2 -> NODE1
(XEN) CPU3 -> NODE1
(XEN) CPU4 -> NODE1
(XEN) CPU5 -> NODE1
(XEN) CPU6 -> NODE1
(XEN) CPU7 -> NODE1
(XEN) CPU8 -> NODE0
(XEN) CPU9 -> NODE0
(XEN) CPU10 -> NODE0
(XEN) CPU11 -> NODE0
(XEN) CPU12 -> NODE0
(XEN) CPU13 -> NODE0
(XEN) CPU14 -> NODE0
(XEN) CPU15 -> NODE0
(XEN) ''H'' pressed -> dumping heap info (now-0xF4:3B96C943)
(XEN) heap[0][1][0]-> 1 pages
(XEN) heap[0][1][4]-> 16 pages
(XEN) heap[0][1][6]-> 64 pages
(XEN) heap[0][1][7]-> 256 pages
(XEN) heap[0][1][8]-> 512 pages
(XEN) heap[0][1][9]-> 1024 pages
(XEN) heap[0][1][10]-> 1024 pages
(XEN) heap[1][0][0]-> 3 pages
(XEN) heap[1][0][1]-> 14 pages
(XEN) heap[1][0][2]-> 8 pages
(XEN) heap[1][0][3]-> 16 pages
(XEN) heap[1][0][4]-> 32 pages
(XEN) heap[1][0][5]-> 64 pages
(XEN) heap[1][0][6]-> 128 pages
(XEN) heap[1][0][7]-> 256 pages
(XEN) heap[1][0][8]-> 256 pages
(XEN) heap[1][0][10]-> 1024 pages
(XEN) heap[1][0][12]-> 4096 pages
(XEN) heap[1][0][13]-> 8192 pages
(XEN) heap[1][0][14]-> 16384 pages
(XEN) heap[1][0][16]-> 65536 pages
(XEN) heap[1][0][17]-> 131072 pages
(XEN) heap[1][0][18]-> 262144 pages
(XEN) heap[1][0][19]-> 524288 pages
(XEN) heap[1][0][20]-> 7340032 pages
(XEN) heap[1][1][0]-> 3 pages
(XEN) heap[1][1][1]-> 4 pages
(XEN) heap[1][1][2]-> 4 pages
(XEN) heap[1][1][3]-> 8 pages
(XEN) heap[1][1][4]-> 16 pages
(XEN) heap[1][1][5]-> 32 pages
(XEN) heap[1][1][6]-> 64 pages
(XEN) heap[1][1][7]-> 384 pages
(XEN) heap[1][1][8]-> 256 pages
(XEN) heap[1][1][9]-> 512 pages
(XEN) heap[1][1][10]-> 2048 pages
(XEN) heap[1][1][11]-> 4096 pages
(XEN) heap[1][1][12]-> 8192 pages
(XEN) heap[1][1][13]-> 8192 pages
(XEN) heap[1][1][15]-> 32768 pages
(XEN) heap[1][1][16]-> 65536 pages
(XEN) heap[1][1][18]-> 262144 pages
(XEN) heap[1][1][20]-> 7340032 pages
(XEN) heap[2][1][0]-> 1 pages
(XEN) heap[2][1][2]-> 4 pages
(XEN) heap[2][1][3]-> 8 pages
(XEN) heap[2][1][4]-> 16 pages
(XEN) heap[2][1][5]-> 64 pages
(XEN) heap[2][1][7]-> 128 pages
(XEN) heap[2][1][10]-> 1024 pages
(XEN) heap[2][1][11]-> 2048 pages
(XEN) heap[2][1][12]-> 4096 pages
(XEN) heap[2][1][16]-> 65536 pages
(XEN) heap[2][1][18]-> 262144 pages
(XEN) ''u'' pressed -> dumping numa info (now-0xF5:BF1D64C7)
(XEN) idx0 -> NODE0 start->8421376 size->8388608
(XEN) phys_to_nid(808001000) -> 0 should be 0
(XEN) idx1 -> NODE1 start->0 size->8421376
(XEN) phys_to_nid(1000) -> 1 should be 1
(XEN) CPU0 -> NODE1
(XEN) CPU1 -> NODE1
(XEN) CPU2 -> NODE1
(XEN) CPU3 -> NODE1
(XEN) CPU4 -> NODE1
(XEN) CPU5 -> NODE1
(XEN) CPU6 -> NODE1
(XEN) CPU7 -> NODE1
(XEN) CPU8 -> NODE0
(XEN) CPU9 -> NODE0
(XEN) CPU10 -> NODE0
(XEN) CPU11 -> NODE0
(XEN) CPU12 -> NODE0
(XEN) CPU13 -> NODE0
(XEN) CPU14 -> NODE0
(XEN) CPU15 -> NODE0

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Ryan Harper

2006-Aug-17 16:47 UTC

head link

Re: [Xen-devel] [PATCH 0/6] xen, xend, tools: Add NUMA support to Xen Issues on the ES7000

* Subrahmanian, Raj <raj.subrahmanian@unisys.com> [2006-08-16
22:29]:> Ryan,
> I put in the NUMA patches 1-6 on changeset 10946 (the patches
wouldn''t
> apply cleanly on the current tip). I ran with both 1 cell and 2 cells. 
I''ll be sending an update soon.
> I have attached the complete output.
> I got the heap and the numa info before and after running xm top (which
> slowed the system down dramatically as mentioned previously).
> http://lists.xensource.com/archives/html/xen-devel/2006-08/msg00348.html
> As mentioned previously, the system does not die (I can get the debug
> info, I can ping etc). But the system slows down dramatically, so
> ssh-ing into the box is impossible.
> Let me know what else I can try out/look at etc.
I can''t reproduce the hang, however, there are some issues that need
fixing up with libxenstat and the physinfo hypercall.  I''ll include
those
fixes in when I refresh to tip today.  If you can, I''d be interested in
seeing what process in dom0 is chewing up the cpu if you can get that
info.  I doubt this is an issue, but can you repro with sedf scheduler
as well?  And while I don''t know much about the credit scheduler,
dumping the runqueues ''r'' keyhandler might show something to
the
folks who know the credit scheduler better.

Oh, and if you have a log of xen/dom0 booting on your 1 and 2 cell box
with out the numa patches on the same changeset, I''d like to see that
to
compare output.

-- 
Ryan Harper
Software Engineer; Linux Technology Center
IBM Corp., Austin, Tx
(512) 838-9253   T/L: 678-9253
ryanh@us.ibm.com

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Subrahmanian, Raj

2006-Aug-17 21:34 UTC

head link

RE: [Xen-devel] [PATCH 0/6] xen, xend, tools: Add NUMA support to Xen Issues on the ES7000

> I can''t reproduce the hang, however, there are some issues 
> that need fixing up with libxenstat and the physinfo 
> hypercall.  I''ll include those fixes in when I refresh to tip 
> today.  If you can, I''d be interested in seeing what process 
> in dom0 is chewing up the cpu if you can get that info.  I 
> doubt this is an issue, but can you repro with sedf scheduler 
> as well?  And while I don''t know much about the credit 
> scheduler, dumping the runqueues ''r'' keyhandler might
show
> something to the folks who know the credit scheduler better.
> 
> Oh, and if you have a log of xen/dom0 booting on your 1 and 2 
> cell box with out the numa patches on the same changeset, I''d 
> like to see that to compare output.
I can send that to you rightaway.
I will do the rest of the things over this evening and the night.

Raj


No-NUMA 1 cell
--------------

 __  __            _____  ___                     _        _     _      
 \ \/ /___ _ __   |___ / / _ \    _   _ _ __  ___| |_ __ _| |__ | | ___ 
  \  // _ \ ''_ \    |_ \| | | |__| | | | ''_ \/ __| __/ _` |
''_ \| |/ _ \
  /  \  __/ | | |  ___) | |_| |__| |_| | | | \__ \ || (_| | |_) | |  __/
 /_/\_\___|_| |_| |____(_)___/    \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
                                                                        
 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 3.0-unstable (root@) (gcc version 4.1.0 (SUSE Linux)) Wed
Aug 16 21:52:20 EDT 2006
 Latest ChangeSet: Wed Aug 09 21:34:27 2006 +0100 11049:0e32095a7b46

(XEN) Command line: /boot/xen.gz com1=115200,8N1 console=vga,com1
dom0_mem=512M
(XEN) Physical RAM map:
(XEN)  0000000000000000 - 000000000009dc00 (usable)
(XEN)  000000000009dc00 - 00000000000a0000 (reserved)
(XEN)  00000000000ce000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 0000000002670000 (usable)
(XEN)  0000000002670000 - 00000000026d7000 (ACPI data)
(XEN)  00000000026d7000 - 0000000002700000 (ACPI NVS)
(XEN)  0000000002700000 - 00000000f0000000 (usable)
(XEN)  00000000f8000000 - 00000000fec00000 (reserved)
(XEN)  00000000fffc0000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000808000000 (usable)
(XEN) System RAM: 32639MB (33422388kB)
(XEN) Xen heap: 13MB (13452kB)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) found SMP MP-table at 000f8680
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 PTLTD                                 ) @
0x00000000000f8650
(XEN) ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x06040000) @
0x000000000267dfe3
(XEN) ACPI: FADT (v004 UNISYS ZORRO    0x06040000 PTL  0x00000008) @
0x00000000026d610c
(XEN) ACPI: OEM1 (v001 UNISYS   OEM1   0x06040000  LTP 0x06040000) @
0x00000000026d6200
(XEN) ACPI: OEM2 (v001 UNISYS   OEM2   0x06040000  LTP 0x06040000) @
0x00000000026d6230
(XEN) ACPI: WSPT (v001 UNISYS   WSPT   0x06040000  LTP 0x06040000) @
0x00000000026d6e2c
(XEN) ACPI: SRAT (v001 UNISYS   SRAT   0x06040000  LTP 0x06040000) @
0x00000000026d6e54
(XEN) ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x06040000) @
0x00000000026d6f14
(XEN) ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @
0x00000000026d6fb0
(XEN) ACPI: DSDT (v001  Intel  870 SMP 0x06040000 MSFT 0x02000001) @
0x0000000000000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: OEM1 (v001 UNISYS   OEM1   0x06040000  LTP 0x06040000) @
0x00000000026d6200
(XEN) ACPI: DSDT (v001  Intel  870 SMP 0x06040000 MSFT 0x02000001) @
0x0000000000000000
(XEN) Switched to APIC driver `es7000''.
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
(XEN) Processor #6 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 15:4 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec04000] gsi_base[72])
(XEN) IOAPIC[1]: apic_id 10, version 32, address 0xfec04000, GSI 72-95
(XEN) ACPI: IOAPIC (id[0x0b] address[0xfec05000] gsi_base[96])
(XEN) IOAPIC[2]: apic_id 11, version 32, address 0xfec05000, GSI 96-119
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Phys.  Using 3 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 3000.156 MHz processor.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU0: Thermal monitoring enabled
(XEN) CPU0: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) ES7000: Enabling APIC mode.
(XEN) Booting processor 1/6 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU1: Thermal monitoring enabled
(XEN) CPU1: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 2/2 eip 90000
(XEN) Initializing CPU#2
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU2: Thermal monitoring enabled
(XEN) CPU2: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 3/4 eip 90000
(XEN) Initializing CPU#3
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU3: Thermal monitoring enabled
(XEN) CPU3: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
(XEN) checking TSC synchronization across 4 CPUs: 
(XEN) CPU#0 had -2 usecs TSC skew, fixed it up.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 4 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000000f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000017000000->0000000018000000 (126976 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff80100000->ffffffff804b4f08
(XEN)  Init. ramdisk: ffffffff804b5000->ffffffff80b49a00
(XEN)  Phys-Mach map: ffffffff80b4a000->ffffffff80c4a000
(XEN)  Start info:    ffffffff80c4a000->ffffffff80c4b000
(XEN)  Page tables:   ffffffff80c4b000->ffffffff80c56000
(XEN)  Boot stack:    ffffffff80c56000->ffffffff80c57000
(XEN)  TOTAL:         ffffffff80000000->ffffffff81000000
(XEN)  ENTRY ADDRESS: ffffffff80100000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Initrd len 0x694a00, start at 0xffffffff804b5000
(XEN) Scrubbing Free RAM:
........................................................................
........................................................................
........................................................................
........................................................................
.........................................done.
(XEN) Xen trace buffers: disabled
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times
to switch
input to Xen).
kernel direct mapping tables up to 20800000 @ c56000-d5c000
Bootdata ok (command line is root=/dev/sda2 resume=/dev/sda1 showopts
max_loop=64)
Linux version 2.6.16.13-xen (root@m1132-xenpreview) (gcc version 4.1.0
(SUSE Linux)) #1 SMP Wed Aug 16 22:01:19 EDT 2006
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000020800000 (usable)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec04000] gsi_base[72])
IOAPIC[1]: apic_id 10, version 32, address 0xfec04000, GSI 72-95
ACPI: IOAPIC (id[0x0b] address[0xfec05000] gsi_base[96])
IOAPIC[2]: apic_id 11, version 32, address 0xfec05000, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at f0800000 (gap: f0000000:8000000)
Built 1 zonelists
Kernel command line: root=/dev/sda2 resume=/dev/sda1 showopts
max_loop=64
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
Xen reported: 3000.002 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Software IO TLB enabled: 
 Aperture:     64 megabytes
 Kernel range: 0xffff8800019ee000 - 0xffff8800059ee000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 435580k/532480k available (1898k kernel code, 88040k reserved,
808k data, 168k init)
Calibrating delay using timer specific routine.. 6002.79 BogoMIPS
(lpj=30013961)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Initializing CPU#1
Initializing CPU#2
Brought up 4 CPUs
Initializing CPU#3
migration_cost=1740
checking if image is initramfs... it is
Freeing initrd memory: 6738k freed
DMI present.
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: Device [MBDV] status [00000008]: functional but not present;
setting present
ACPI: PCI Root Bridge [MBDV] (0000:ff)
ACPI: PCI Root Bridge [S0H0] (0000:00)
PCI quirk: region 0d00-0d7f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0e80-0ebf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *6 10 11 14 15)
ACPI: PCI Root Bridge [S0H2] (0000:0f)
PCI: Enable I/O Space to 1 KB Granularity
PCI: Enable I/O Space to 1 KB Granularity
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn''t work, try "pci=routeirq".  If it
helps, post a
report
PCI: Bridge: 0000:00:1e.0
  IO window: 1000-1fff
  MEM window: f6000000-f7efffff
  PREFETCH window: f0800000-f08fffff
PCI: Bridge: 0000:0f:1d.0
  IO window: 2000-23ff
  MEM window: f4f00000-f4ffffff
  PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:100000@f4000000 for 0000:16:01.1
PCI: Bridge: 0000:0f:1f.0
  IO window: 2400-27ff
  MEM window: f4d00000-f4efffff
  PREFETCH window: f3e00000-f3ffffff
IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1155834622.822:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
isa bounce pool size: 16 pages
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 64 devices)
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
blkif_init: reqs=64, pages=704, mmap_vstart=0xffff88001f400000
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NET: Registered protocol family 17
scsi_mod: no version for "struct_module" found: kernel tainted.
SCSI subsystem initialized
ICH4: IDE controller at PCI slot 0000:00:1f.1
GSI 16 sharing vector 0x98 and IRQ 16
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x0880-0x0887, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x0888-0x088f, BIOS settings: hdc:pio, hdd:pio
hda: TOSHIBA CD/DVDW SD-R6472, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.07
GSI 17 sharing vector 0xA0 and IRQ 17
ACPI: PCI Interrupt 0000:16:01.0[A] -> GSI 96 (level, low) -> IRQ 17
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=17
  Vendor: UNISYS    Model: 018200MAG3182LC   Rev: 0610
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 35694860 512-byte hdwr sectors (18276 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
SCSI device sda: 35694860 512-byte hdwr sectors (18276 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
  Vendor: UNISYS    Model: 007114ST39102LC   Rev: B603
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sdb: 17916935 512-byte hdwr sectors (9173 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 17916935 512-byte hdwr sectors (9173 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back w/ FUA
 sdb: sdb1 sdb2
sd 0:0:1:0: Attached scsi disk sdb
sd 0:0:1:0: Attached scsi generic sg1 type 0
GSI 18 sharing vector 0xA8 and IRQ 18
ACPI: PCI Interrupt 0000:16:01.1[B] -> GSI 97 (level, low) -> IRQ 18
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=18
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
Adding 2104472k swap on /dev/sda1.  Priority:-1 extents:1
across:2104472k
Intel(R) PRO/1000 Network Driver - version 6.3.9-k4-NAPI
Copyright (c) 1999-2005 Intel Corporation.
GSI 19 sharing vector 0xB0 and IRQ 19
ACPI: PCI Interrupt 0000:10:01.0[A] -> GSI 72 (level, low) -> IRQ 19
e1000: 0000:10:01.0: e1000_probe: (PCI-X:133MHz:64-bit)
08:00:0b:1e:19:98
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 20 sharing vector 0xB8 and IRQ 20
ACPI: PCI Interrupt 0000:10:01.1[B] -> GSI 73 (level, low) -> IRQ 20
e1000: 0000:10:01.1: e1000_probe: (PCI-X:133MHz:64-bit)
08:00:0b:1e:19:99
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
ACPI: Power Button (FF) [PWRF]
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver

No-NUMA 2 Cells.
------------------

 \ \/ /___ _ __   |___ / / _ \    _   _ _ __  ___| |_ __ _| |__ | | ___ 
  \  // _ \ ''_ \    |_ \| | | |__| | | | ''_ \/ __| __/ _` |
''_ \| |/ _ \
  /  \  __/ | | |  ___) | |_| |__| |_| | | | \__ \ || (_| | |_) | |  __/
 /_/\_\___|_| |_| |____(_)___/    \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
                                                                        
 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 3.0-unstable (root@) (gcc version 4.1.0 (SUSE Linux)) Wed
Aug 16 13:45:59 EDT 2006
 Latest ChangeSet: Fri Aug 04 11:36:07 2006 +0100 10946:e1a2a8029e9f

(XEN) Command line: /boot/xen.gz com1=115200,8N1 console=vga,com1
dom0_mem=512M
(XEN) Physical RAM map:
(XEN)  0000000000000000 - 000000000009dc00 (usable)
(XEN)  000000000009dc00 - 00000000000a0000 (reserved)
(XEN)  00000000000ce000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 0000000002670000 (usable)
(XEN)  0000000002670000 - 00000000026d7000 (ACPI data)
(XEN)  00000000026d7000 - 0000000002700000 (ACPI NVS)
(XEN)  0000000002700000 - 00000000f0000000 (usable)
(XEN)  00000000f8000000 - 00000000fec00000 (reserved)
(XEN)  00000000fffc0000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000001008000000 (usable)
(XEN) System RAM: 65407MB (66976820kB)
(XEN) Xen heap: 12MB (12352kB)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) found SMP MP-table at 000f8680
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 PTLTD                                 ) @
0x00000000000f8650
(XEN) ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x06040000) @
0x000000000267de53
(XEN) ACPI: FADT (v004 UNISYS ZORRO    0x06040000 PTL  0x00000008) @
0x00000000026d5f7c
(XEN) ACPI: OEM1 (v001 UNISYS   OEM1   0x06040000  LTP 0x06040000) @
0x00000000026d6070
(XEN) ACPI: OEM2 (v001 UNISYS   OEM2   0x06040000  LTP 0x06040000) @
0x00000000026d60a0
(XEN) ACPI: WSPT (v001 UNISYS   WSPT   0x06040000  LTP 0x06040000) @
0x00000000026d6c9c
(XEN) ACPI: SRAT (v001 UNISYS   SRAT   0x06040000  LTP 0x06040000) @
0x00000000026d6cc4
(XEN) ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x06040000) @
0x00000000026d6e6c
(XEN) ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @
0x00000000026d6fb0
(XEN) ACPI: DSDT (v001  Intel  870 SMP 0x06040000 MSFT 0x02000001) @
0x0000000000000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: OEM1 (v001 UNISYS   OEM1   0x06040000  LTP 0x06040000) @
0x00000000026d6070
(XEN) ACPI: DSDT (v001  Intel  870 SMP 0x06040000 MSFT 0x02000001) @
0x0000000000000000
(XEN) Switched to APIC driver `es7000''.
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
(XEN) Processor #6 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x08] enabled)
(XEN) Processor #8 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0e] enabled)
(XEN) Processor #14 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
(XEN) Processor #2 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
(XEN) Processor #4 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled)
(XEN) Processor #10 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled)
(XEN) Processor #12 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x30] enabled)
(XEN) Processor #48 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x36] enabled)
(XEN) Processor #54 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x38] enabled)
(XEN) Processor #56 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x3e] enabled)
(XEN) Processor #62 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x32] enabled)
(XEN) Processor #50 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x34] enabled)
(XEN) Processor #52 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x3a] enabled)
(XEN) Processor #58 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x3c] enabled)
(XEN) Processor #60 15:4 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec04000] gsi_base[72])
(XEN) IOAPIC[1]: apic_id 10, version 32, address 0xfec04000, GSI 72-95
(XEN) ACPI: IOAPIC (id[0x0b] address[0xfec05000] gsi_base[96])
(XEN) IOAPIC[2]: apic_id 11, version 32, address 0xfec05000, GSI 96-119
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Phys.  Using 3 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 3000.132 MHz processor.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU0: Thermal monitoring enabled
(XEN) CPU0: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) ES7000: Enabling APIC mode.
(XEN) Booting processor 1/6 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU1: Thermal monitoring enabled
(XEN) CPU1: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 2/8 eip 90000
(XEN) Initializing CPU#2
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 2
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU2: Thermal monitoring enabled
(XEN) CPU2: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 3/14 eip 90000
(XEN) Initializing CPU#3
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 3
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU3: Thermal monitoring enabled
(XEN) CPU3: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 4/2 eip 90000
(XEN) Initializing CPU#4
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#4.
(XEN) CPU4: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU4: Thermal monitoring enabled
(XEN) CPU4: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 5/4 eip 90000
(XEN) Initializing CPU#5
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#5.
(XEN) CPU5: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU5: Thermal monitoring enabled
(XEN) CPU5: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 6/10 eip 90000
(XEN) Initializing CPU#6
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 2
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#6.
(XEN) CPU6: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU6: Thermal monitoring enabled
(XEN) CPU6: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 7/12 eip 90000
(XEN) Initializing CPU#7
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 3
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#7.
(XEN) CPU7: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU7: Thermal monitoring enabled
(XEN) CPU7: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 8/48 eip 90000
(XEN) Initializing CPU#8
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 12
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#8.
(XEN) CPU8: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU8: Thermal monitoring enabled
(XEN) CPU8: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 9/54 eip 90000
(XEN) Initializing CPU#9
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 13
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#9.
(XEN) CPU9: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU9: Thermal monitoring enabled
(XEN) CPU9: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 10/56 eip 90000
(XEN) Initializing CPU#10
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 14
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#10.
(XEN) CPU10: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU10: Thermal monitoring enabled
(XEN) CPU10: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 11/62 eip 90000
(XEN) Initializing CPU#11
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 15
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#11.
(XEN) CPU11: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU11: Thermal monitoring enabled
(XEN) CPU11: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 12/50 eip 90000
(XEN) Initializing CPU#12
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 12
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#12.
(XEN) CPU12: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU12: Thermal monitoring enabled
(XEN) CPU12: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 13/52 eip 90000
(XEN) Initializing CPU#13
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 13
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#13.
(XEN) CPU13: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU13: Thermal monitoring enabled
(XEN) CPU13: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 14/58 eip 90000
(XEN) Initializing CPU#14
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 14
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#14.
(XEN) CPU14: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU14: Thermal monitoring enabled
(XEN) CPU14: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 15/60 eip 90000
(XEN) Initializing CPU#15
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 15
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#15.
(XEN) CPU15: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU15: Thermal monitoring enabled
(XEN) CPU15: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Total of 16 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
(XEN) checking TSC synchronization across 16 CPUs: 
(XEN) CPU#0 had 832422 usecs TSC skew, fixed it up.
(XEN) CPU#1 had 832433 usecs TSC skew, fixed it up.
(XEN) CPU#2 had 832433 usecs TSC skew, fixed it up.
(XEN) CPU#3 had 832438 usecs TSC skew, fixed it up.
(XEN) CPU#4 had 832434 usecs TSC skew, fixed it up.
(XEN) CPU#5 had 832435 usecs TSC skew, fixed it up.
(XEN) CPU#6 had 832433 usecs TSC skew, fixed it up.
(XEN) CPU#7 had 832437 usecs TSC skew, fixed it up.
(XEN) CPU#8 had -832434 usecs TSC skew, fixed it up.
(XEN) CPU#9 had -832433 usecs TSC skew, fixed it up.
(XEN) CPU#10 had -832433 usecs TSC skew, fixed it up.
(XEN) CPU#11 had -832433 usecs TSC skew, fixed it up.
(XEN) CPU#12 had -832434 usecs TSC skew, fixed it up.
(XEN) CPU#13 had -832432 usecs TSC skew, fixed it up.
(XEN) CPU#14 had -832433 usecs TSC skew, fixed it up.
(XEN) CPU#15 had -832433 usecs TSC skew, fixed it up.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 16 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000000f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   000000002b000000->000000002c000000 (126976 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff80100000->ffffffff804b4f08
(XEN)  Init. ramdisk: ffffffff804b5000->ffffffff80b49a00
(XEN)  Phys-Mach map: ffffffff80b4a000->ffffffff80c4a000
(XEN)  Start info:    ffffffff80c4a000->ffffffff80c4b000
(XEN)  Page tables:   ffffffff80c4b000->ffffffff80c56000
(XEN)  Boot stack:    ffffffff80c56000->ffffffff80c57000
(XEN)  TOTAL:         ffffffff80000000->ffffffff81000000
(XEN)  ENTRY ADDRESS: ffffffff80100000
(XEN) Dom0 has maximum 16 VCPUs
(XEN) Initrd len 0x694a00, start at 0xffffffff804b5000
(XEN) Scrubbing Free RAM:
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
.........done.
(XEN) Xen trace buffers: disabled
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times
to switch
input to Xen).
kernel direct mapping tables up to 20800000 @ c56000-d5c000
Bootdata ok (command line is root=/dev/sda2 resume=/dev/sda1 showopts)
Linux version 2.6.16.13-xen (root@m1132-xenpreview) (gcc version 4.1.0
(SUSE Linux)) #1 SMP Wed Aug 16 14:01:59 EDT 2006
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000020800000 (usable)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x36] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x38] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x3e] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x3a] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x3c] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec04000] gsi_base[72])
IOAPIC[1]: apic_id 10, version 32, address 0xfec04000, GSI 72-95
ACPI: IOAPIC (id[0x0b] address[0xfec05000] gsi_base[96])
IOAPIC[2]: apic_id 11, version 32, address 0xfec05000, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at f0800000 (gap: f0000000:8000000)
Built 1 zonelists
Kernel command line: root=/dev/sda2 resume=/dev/sda1 showopts
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
Xen reported: 2999.996 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Software IO TLB enabled: 
 Aperture:     64 megabytes
 Kernel range: 0xffff880001a4e000 - 0xffff880005a4e000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 435200k/532480k available (1898k kernel code, 88424k reserved,
808k data, 168k init)
Calibrating delay using timer specific routine.. 6003.14 BogoMIPS
(lpj=30015720)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Initializing CPU#1
Initializing CPU#2
Initializing CPU#3
Initializing CPU#4
Initializing CPU#5
Initializing CPU#6
Initializing CPU#7
Initializing CPU#8
Initializing CPU#9
Initializing CPU#10
Initializing CPU#11
Initializing CPU#12
Initializing CPU#13
Initializing CPU#14
Brought up 16 CPUs
Initializing CPU#15
migration_cost=1712
checking if image is initramfs... it is
Freeing initrd memory: 6738k freed
DMI present.
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: Device [MBDV] status [00000008]: functional but not present;
setting present
ACPI: PCI Root Bridge [MBDV] (0000:ff)
ACPI: PCI Root Bridge [S0H0] (0000:00)
PCI quirk: region 0d00-0d7f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0e80-0ebf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *6 10 11 14 15)
ACPI: PCI Root Bridge [S0H2] (0000:0f)
PCI: Enable I/O Space to 1 KB Granularity
PCI: Enable I/O Space to 1 KB Granularity
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn''t work, try "pci=routeirq".  If it
helps, post a
report
PCI: Bridge: 0000:00:1e.0
  IO window: 1000-1fff
  MEM window: f6000000-f7efffff
  PREFETCH window: f0800000-f08fffff
PCI: Bridge: 0000:0f:1d.0
  IO window: 2000-23ff
  MEM window: f4f00000-f4ffffff
  PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:100000@f4000000 for 0000:16:01.1
PCI: Bridge: 0000:0f:1f.0
  IO window: 2400-27ff
  MEM window: f4d00000-f4efffff
  PREFETCH window: f3e00000-f3ffffff
IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1155739246.364:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
isa bounce pool size: 16 pages
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
blkif_init: reqs=64, pages=704, mmap_vstart=0xffff88001f000000
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NET: Registered protocol family 17
scsi_mod: no version for "struct_module" found: kernel tainted.
SCSI subsystem initialized
ICH4: IDE controller at PCI slot 0000:00:1f.1
GSI 16 sharing vector 0x98 and IRQ 16
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x0880-0x0887, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x0888-0x088f, BIOS settings: hdc:pio, hdd:pio
hda: TOSHIBA CD/DVDW SD-R6472, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.07
GSI 17 sharing vector 0xA0 and IRQ 17
ACPI: PCI Interrupt 0000:16:01.0[A] -> GSI 96 (level, low) -> IRQ 17
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=17
  Vendor: UNISYS    Model: 018200MAG3182LC   Rev: 0610
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 35694860 512-byte hdwr sectors (18276 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
SCSI device sda: 35694860 512-byte hdwr sectors (18276 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
  Vendor: UNISYS    Model: 007114ST39102LC   Rev: B603
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sdb: 17916935 512-byte hdwr sectors (9173 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 17916935 512-byte hdwr sectors (9173 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back w/ FUA
 sdb: sdb1 sdb2
sd 0:0:1:0: Attached scsi disk sdb
sd 0:0:1:0: Attached scsi generic sg1 type 0
GSI 18 sharing vector 0xA8 and IRQ 18
ACPI: PCI Interrupt 0000:16:01.1[B] -> GSI 97 (level, low) -> IRQ 18
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=18
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
Adding 2104472k swap on /dev/sda1.  Priority:-1 extents:1
across:2104472k
Intel(R) PRO/1000 Network Driver - version 6.3.9-k4-NAPI
Copyright (c) 1999-2005 Intel Corporation.
GSI 19 sharing vector 0xB0 and IRQ 19
ACPI: PCI Interrupt 0000:10:01.0[A] -> GSI 72 (level, low) -> IRQ 19
e1000: 0000:10:01.0: e1000_probe: (PCI-X:133MHz:64-bit)
08:00:0b:1e:19:98
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 20 sharing vector 0xB8 and IRQ 20
ACPI: PCI Interrupt 0000:10:01.1[B] -> GSI 73 (level, low) -> IRQ 20
e1000: 0000:10:01.1: e1000_probe: (PCI-X:133MHz:64-bit)
08:00:0b:1e:19:99
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
ACPI: Power Button (FF) [PWRF]
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
(XEN) *** Serial input -> Xen (type ''CTRL-a'' three times to
switch input
to DOM0).
(XEN) ''h'' pressed -> showing installed handlers
(XEN)  key ''%'' (ascii ''25'') => Trap to
xendbg
(XEN)  key ''N'' (ascii ''4e'') => NMI
statistics
(XEN)  key ''R'' (ascii ''52'') => reboot
machine
(XEN)  key ''a'' (ascii ''61'') => dump timer
queues
(XEN)  key ''d'' (ascii ''64'') => dump
registers
(XEN)  key ''h'' (ascii ''68'') => show this
message
(XEN)  key ''i'' (ascii ''69'') => dump
interrupt bindings
(XEN)  key ''m'' (ascii ''6d'') => memory
info
(XEN)  key ''n'' (ascii ''6e'') => trigger an
NMI
(XEN)  key ''q'' (ascii ''71'') => dump
domain (and guest debug) info
(XEN)  key ''r'' (ascii ''72'') => dump run
queues
(XEN)  key ''t'' (ascii ''74'') => display
multi-cpu clock info
(XEN)  key ''v'' (ascii ''76'') => dump
Intel''s VMCS
(XEN)  key ''z'' (ascii ''7a'') => print
ioapic info
xenbr0: port 2(peth0) entering disabled state
xenbr0: port 1(vif0.0) entering disabled state
md: stopping all md devices.
Synchronizing SCSI cache for disk sdb: 
System halted.
(XEN) Domain 0 halted: halting machine.
[-- root@localhost.localdomain detached -- Wed Aug 16 14:45:31 2006]
[-- root@localhost.localdomain attached -- Wed Aug 16 14:45:31 2006]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Ryan Harper

2006-Aug-17 22:46 UTC

head link

Re: [Xen-devel] [PATCH 0/6] xen, xend, tools: Add NUMA support to Xen Issues on the ES7000

* Subrahmanian, Raj <raj.subrahmanian@unisys.com> [2006-08-17
16:35]:> > I can''t reproduce the hang, however, there are some issues 
> > that need fixing up with libxenstat and the physinfo 
> > hypercall.  I''ll include those fixes in when I refresh to tip
> > today.  If you can, I''d be interested in seeing what process 
> > in dom0 is chewing up the cpu if you can get that info.  I 
> > doubt this is an issue, but can you repro with sedf scheduler 
> > as well?  And while I don''t know much about the credit 
> > scheduler, dumping the runqueues ''r'' keyhandler
might show
> > something to the folks who know the credit scheduler better.
> > 
> > Oh, and if you have a log of xen/dom0 booting on your 1 and 2 
> > cell box with out the numa patches on the same changeset, I''d
> > like to see that to compare output.
> 
> I can send that to you rightaway.
> I will do the rest of the things over this evening and the night.
Thanks.  I resent the patchset and it should apply cleanly to changeset:
11134:ec03b24a2d83.  Let me know if you still see the slow-down running
xm top.

I''ve got one more change to PATCH3 to work out; I''ll send that
one in
tomorrow but I wanted to give you a set that would apply against tip to
test.

-- 
Ryan Harper
Software Engineer; Linux Technology Center
IBM Corp., Austin, Tx
(512) 838-9253   T/L: 678-9253
ryanh@us.ibm.com

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Xen devel - Aug 2006 - RE: [PATCH 0/6] xen, xend, tools: Add NUMA support to Xen Issues on the ES7000

RE: [Xen-devel] [PATCH 0/6] xen, xend, tools: Add NUMA support to Xen Issues on the ES7000

Re: [Xen-devel] [PATCH 0/6] xen, xend, tools: Add NUMA support to Xen Issues on the ES7000

RE: [Xen-devel] [PATCH 0/6] xen, xend, tools: Add NUMA support to Xen Issues on the ES7000

Re: [Xen-devel] [PATCH 0/6] xen, xend, tools: Add NUMA support to Xen Issues on the ES7000