i have followed the instrucrions in this file and have problems.
when i run..xm create /etc/xen/xmexample1..i get this error:
Error: Error creating domain: (0, ''Error'')
i have tried adjusting the contents of your configuration file, without
results
different from this.
i am running suse10.0 and xen-3.0_8257-0.1.gz. on a p4 with 1g ram and 122g
h/d.
i am including the /etc/xen/xmexample1 file:
# -*- mode: python; -*-
#===========================================================================#
Python configuration setup for ''xm create''.
# This script sets the parameters used when a domain is created using
''xm
create''.
# You use a separate script for each domain you want to create, or
# you can set the parameters for the domain on the xm command line.
#===========================================================================
#----------------------------------------------------------------------------
# Kernel image file.
kernel = "/boot/vmlinuz-xen"
# Optional ramdisk.
ramdisk = "/boot/initrd-xen"
# The domain build function. Default is ''linux''.
builder=''linux''
# Initial memory allocation (in megabytes) for the new domain.
memory = 128
# A name for your domain. All domains must have different names.
name = "domain1"
# List of which CPUS this domain is allowed to use, default Xen picks
cpus = "" # leave to Xen to pick
#cpus = "0" # all vcpus run on CPU0
#cpus = "0-3,5,^1" # run on cpus 0,2,3,5
# Number of Virtual CPUS to use, default is 1
vcpus =2
#----------------------------------------------------------------------------
# Define network interfaces.
# Number of network interfaces. Default is 1.
#nics=1
# Optionally define mac and/or bridge for the network interfaces.
# Random MACs are assigned if not given.
vif = [ ''mac=00:16:3e:00:00:11, bridge=xenbr0'' ]
#----------------------------------------------------------------------------
# Define the disk devices you want the domain to have access to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain will see,
# and MODE is r for read-only, w for read-write.
disk = [ ''phy:hda1,hda1,w'' ]
#----------------------------------------------------------------------------
# Define to which TPM instance the user domain should communicate.
# The vtpm entry is of the form
''instance=INSTANCE,backend=DOM''
# where INSTANCE indicates the instance number of the TPM the VM
# should be talking to and DOM provides the domain where the backend
# is located.
# Note that no two virtual machines should try to connect to the same
# TPM instance. The handling of all TPM instances does require
# some management effort in so far that VM configration files (and thus
# a VM) should be associated with a TPM instance throughout the lifetime
# of the VM / VM configuration file. The instance number must be
# greater or equal to 1.
vtpm = [ ''instance=1,backend=0'' ]
#----------------------------------------------------------------------------
# Set the kernel command line for the new domain.
# You only need to define the IP parameters and hostname if the
domain''s
# IP config doesn''t, e.g. in ifcfg-eth0 or via DHCP.
# You can use ''extra'' to set the runlevel and custom
environment
# variables used by custom rc scripts (e.g. VMID=, usr= ).
# Set if you want dhcp to allocate the IP address.
dhcp="dhcp"
# Set netmask.
#netmask# Set default gateway.
#gateway# Set the hostname.
#hostname= "vm%d" % vmid
# Set root device.
root = "/var/lib/xen/images/domain1/hda,ro"
# Root device for nfs.
#root = "/dev/nfs"
# The nfs server.
#nfs_server = ''169.254.1.0''
# Root directory on the nfs server.
#nfs_root = ''/full/path/to/root/directory''
# Sets runlevel 4.
extra = "4"
PLEASE help.
--
Edward Dunagin
4646 Glenwood Drive
Bozeman, MT 59718
mobile 406-570-0992
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel