ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 18 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0f.0: 3Com PCI 3c980C Python-T at 0x1c00. Vers LK1.1.19 ***INVALID CHECKSUM 00e5*** <3>*** EEPROM MAC address is invalid. 3c59x: vortex_probe1 fails. Returns -22 3c59x: probe of 0000:00:0f.0 failed with error -22 I suspect this may be related to some of the network wackiness I am seeing :-) Also noticed lots of scsi timeouts as well. I rebooted in stock FC4 kernel and do not see any problems with scsi or the 3c59x. Did not see any of these issues with stock FC4 kernel. Regards, Ted _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
On Fri, 2005-10-21 at 12:21 -0400, Ted Kaczmarek wrote:> ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 18 > 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html > 0000:00:0f.0: 3Com PCI 3c980C Python-T at 0x1c00. Vers LK1.1.19 > ***INVALID CHECKSUM 00e5*** <3>*** EEPROM MAC address is invalid. > 3c59x: vortex_probe1 fails. Returns -22 > 3c59x: probe of 0000:00:0f.0 failed with error -22 > > > I suspect this may be related to some of the network wackiness I am > seeing :-) > > Also noticed lots of scsi timeouts as well. I rebooted in stock FC4 > kernel and do not see any problems with scsi or the 3c59x. > > > Did not see any of these issues with stock FC4 kernel. > > > > Regards, > TedJust built from pristine source and see the same issue. Regards, Ted _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
On Fri, 2005-10-21 at 10:26 -0700, Nivedita Singhvi wrote:> Ted Kaczmarek wrote: > > On Fri, 2005-10-21 at 12:21 -0400, Ted Kaczmarek wrote: > > > >>Also noticed lots of scsi timeouts as well. I rebooted in stock FC4 > >>kernel and do not see any problems with scsi or the 3c59x. > >> > >> > >>Did not see any of these issues with stock FC4 kernel. > >> > >> > >> > >>Regards, > >>Ted > > > > > > Just built from pristine source and see the same issue. > > > > Regards, > > Ted > > Ted, stupid question but did you mean mainline Linux? > i.e, is it a Xen issue? > > thanks, > NiveditaTimer ISR/1: Time went backwards: delta=-216859625 cpu_delta=3196141 shadow=10003318252 off=999877946 processed=11220055766 cpu_processed=11000000000 0: 11220055766 1: 11000000000 SCSI subsystem initialized ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:0d.1[B] -> GSI 17 (level, low) -> IRQ 17 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs I missed that, didn''t scroll up enough in the log files. This did not start until after the 2.6.12.5 patch was correctly applied from what I can tell. I need to try this as a monolithic kernel as well still. ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:0d.1[B] -> GSI 17 (level, low) -> IRQ 17 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs (scsi0:A:0:0): parity error detected in DT Data-in phase. SEQADDR(0x1a6) SCSIRATE(0x0) Unexpected non-DT Data Phase scsi0:0:0:0: Attempting to queue an ABORT message CDB: 0x12 0x0 0x0 0x0 0x24 0x0 ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 18 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0f.0: 3Com PCI 3c980C Python-T at 0x1c00. Vers LK1.1.19 ***INVALID CHECKSUM 00c7*** <3>*** EEPROM MAC address is invalid. 3c59x: vortex_probe1 fails. Returns -22 3c59x: probe of 0000:00:0f.0 failed with error -22 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 19 (level, low) -> IRQ 19 0000:00:10.0: 3Com PCI 3c980C Python-T at 0x1c80. Vers LK1.1.19 ***INVALID CHECKSUM 00c8*** <3>*** EEPROM MAC address is invalid. 3c59x: vortex_probe1 fails. Returns -22 3c59x: probe of 0000:00:10.0 failed with error -22 Intel(R) PRO/1000 Network Driver - version 6.0.54-k2-NAPI Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 [root@inyoureyes xen]# cat /proc/interrupts CPU0 CPU1 1: 8 0 Phys-irq i8042 9: 0 0 Phys-irq acpi 14: 21794 0 Phys-irq ide0 16: 7480 0 Phys-irq aic7xxx, peth0 17: 18046 0 Phys-irq aic7xxx 18: 0 0 Phys-irq EMU10K1 19: 98 0 Phys-irq ohci_hcd:usb1 256: 94140 0 Dynamic-irq timer0 257: 3037 0 Dynamic-irq resched0 258: 14 0 Dynamic-irq callfunc0 259: 0 3919 Dynamic-irq resched1 260: 0 2632 Dynamic-irq callfunc1 261: 0 15144 Dynamic-irq timer1 262: 7327 0 Dynamic-irq xenbus 263: 381 0 Dynamic-irq console 264: 0 0 Dynamic-irq net-be-dbg 265: 1359 0 Dynamic-irq blkif-backend 266: 2 0 Dynamic-irq blkif-backend 267: 1355 0 Dynamic-irq blkif-backend 268: 2 0 Dynamic-irq blkif-backend 269: 31 0 Dynamic-irq vif2.1 270: 1354 0 Dynamic-irq blkif-backend 271: 2 0 Dynamic-irq blkif-backend 272: 3510 0 Dynamic-irq blkif-backend 273: 49 0 Dynamic-irq blkif-backend 274: 28 0 Dynamic-irq vif4.1 275: 818 0 Dynamic-irq blkif-backend 276: 1 0 Dynamic-irq blkif-backend 277: 734 0 Dynamic-irq blkif-backend 278: 2 0 Dynamic-irq blkif-backend 279: 40 0 Dynamic-irq vif6.1 280: 607 0 Dynamic-irq blkif-backend 281: 2 0 Dynamic-irq blkif-backend 282: 10 0 Dynamic-irq vif7.1 283: 603 0 Dynamic-irq blkif-backend 284: 2 0 Dynamic-irq blkif-backend 285: 15 0 Dynamic-irq vif8.1 286: 796 0 Dynamic-irq blkif-backend 287: 2 0 Dynamic-irq blkif-backend 288: 795 0 Dynamic-irq blkif-backend 289: 3 0 Dynamic-irq blkif-backend 290: 41 0 Dynamic-irq vif10.1 NMI: 0 0 LOC: 0 0 ERR: 0 MIS: 0 This above is with an e1000 for eth0. Ted _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
On Fri, 2005-10-21 at 13:59 -0400, Ted Kaczmarek wrote:> On Fri, 2005-10-21 at 10:26 -0700, Nivedita Singhvi wrote: > > Ted Kaczmarek wrote: > > > On Fri, 2005-10-21 at 12:21 -0400, Ted Kaczmarek wrote: > > > > > >>Also noticed lots of scsi timeouts as well. I rebooted in stock FC4 > > >>kernel and do not see any problems with scsi or the 3c59x. > > >> > > >> > > >>Did not see any of these issues with stock FC4 kernel. > > >> > > >> > > >> > > >>Regards, > > >>Ted > > > > > > > > > Just built from pristine source and see the same issue. > > > > > > Regards, > > > Ted > > > > Ted, stupid question but did you mean mainline Linux? > > i.e, is it a Xen issue? > > > > thanks, > > Nivedita > > Timer ISR/1: Time went backwards: delta=-216859625 cpu_delta=3196141 > shadow=10003318252 off=999877946 processed=11220055766 > cpu_processed=11000000000 > 0: 11220055766 > 1: 11000000000 > SCSI subsystem initialized > ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 16 > ACPI: PCI Interrupt 0000:00:0d.1[B] -> GSI 17 (level, low) -> IRQ 17 > scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 > <Adaptec aic7899 Ultra160 SCSI adapter> > aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > > > > > I missed that, didn''t scroll up enough in the log files. > > This did not start until after the 2.6.12.5 patch was correctly applied > from what I can tell. > > I need to try this as a monolithic kernel as well still. > > > > ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 16 > ACPI: PCI Interrupt 0000:00:0d.1[B] -> GSI 17 (level, low) -> IRQ 17 > scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 > <Adaptec aic7899 Ultra160 SCSI adapter> > aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > > (scsi0:A:0:0): parity error detected in DT Data-in phase. SEQADDR(0x1a6) > SCSIRATE(0x0) > Unexpected non-DT Data Phase > scsi0:0:0:0: Attempting to queue an ABORT message > CDB: 0x12 0x0 0x0 0x0 0x24 0x0 > > > ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 18 > 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html > 0000:00:0f.0: 3Com PCI 3c980C Python-T at 0x1c00. Vers LK1.1.19 > ***INVALID CHECKSUM 00c7*** <3>*** EEPROM MAC address is invalid. > 3c59x: vortex_probe1 fails. Returns -22 > 3c59x: probe of 0000:00:0f.0 failed with error -22 > ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 19 (level, low) -> IRQ 19 > 0000:00:10.0: 3Com PCI 3c980C Python-T at 0x1c80. Vers LK1.1.19 > ***INVALID CHECKSUM 00c8*** <3>*** EEPROM MAC address is invalid. > 3c59x: vortex_probe1 fails. Returns -22 > 3c59x: probe of 0000:00:10.0 failed with error -22 > Intel(R) PRO/1000 Network Driver - version 6.0.54-k2-NAPI > Copyright (c) 1999-2004 Intel Corporation. > ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection > ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 > > [root@inyoureyes xen]# cat /proc/interrupts > CPU0 CPU1 > 1: 8 0 Phys-irq i8042 > 9: 0 0 Phys-irq acpi > 14: 21794 0 Phys-irq ide0 > 16: 7480 0 Phys-irq aic7xxx, peth0 > 17: 18046 0 Phys-irq aic7xxx > 18: 0 0 Phys-irq EMU10K1 > 19: 98 0 Phys-irq ohci_hcd:usb1 > 256: 94140 0 Dynamic-irq timer0 > 257: 3037 0 Dynamic-irq resched0 > 258: 14 0 Dynamic-irq callfunc0 > 259: 0 3919 Dynamic-irq resched1 > 260: 0 2632 Dynamic-irq callfunc1 > 261: 0 15144 Dynamic-irq timer1 > 262: 7327 0 Dynamic-irq xenbus > 263: 381 0 Dynamic-irq console > 264: 0 0 Dynamic-irq net-be-dbg > 265: 1359 0 Dynamic-irq blkif-backend > 266: 2 0 Dynamic-irq blkif-backend > 267: 1355 0 Dynamic-irq blkif-backend > 268: 2 0 Dynamic-irq blkif-backend > 269: 31 0 Dynamic-irq vif2.1 > 270: 1354 0 Dynamic-irq blkif-backend > 271: 2 0 Dynamic-irq blkif-backend > 272: 3510 0 Dynamic-irq blkif-backend > 273: 49 0 Dynamic-irq blkif-backend > 274: 28 0 Dynamic-irq vif4.1 > 275: 818 0 Dynamic-irq blkif-backend > 276: 1 0 Dynamic-irq blkif-backend > 277: 734 0 Dynamic-irq blkif-backend > 278: 2 0 Dynamic-irq blkif-backend > 279: 40 0 Dynamic-irq vif6.1 > 280: 607 0 Dynamic-irq blkif-backend > 281: 2 0 Dynamic-irq blkif-backend > 282: 10 0 Dynamic-irq vif7.1 > 283: 603 0 Dynamic-irq blkif-backend > 284: 2 0 Dynamic-irq blkif-backend > 285: 15 0 Dynamic-irq vif8.1 > 286: 796 0 Dynamic-irq blkif-backend > 287: 2 0 Dynamic-irq blkif-backend > 288: 795 0 Dynamic-irq blkif-backend > 289: 3 0 Dynamic-irq blkif-backend > 290: 41 0 Dynamic-irq vif10.1 > NMI: 0 0 > LOC: 0 0 > ERR: 0 > MIS: 0 > > > This above is with an e1000 for eth0. > > Ted >Changeset 7468:17a9f111fa93 does not have this problem. Regards, Ted _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel