Does anyone know how to get Wine to recognize an LPT1: port with a HASP (dongle) installed? I use a program called Magic V7 by Magic Software Enterprises (www.magic-sw.com) The Deployment module works fine under Wine, but the Development module looks to the parallel port to verify that the dongle is installed. I get a "Protection Violation" error which under Windows meant that the HASP was not connected to the parallel port. I have tried the following command but still no luck. ln -s /dev/lp0 lpt1 HELP !!
>>>>> "kevin@knysna" == kevin@knysna sa com <kevin@knysna.sa.com> writes:kevin@knysna> Does anyone know how to get Wine to recognize an LPT1: kevin@knysna> port with a HASP (dongle) installed? I use a program kevin@knysna> called Magic V7 by Magic Software Enterprises kevin@knysna> (www.magic-sw.com) The Deployment module works fine under kevin@knysna> Wine, but the Development module looks to the parallel kevin@knysna> port to verify that the dongle is installed. I get a kevin@knysna> "Protection Violation" error which under Windows meant kevin@knysna> that the HASP was not connected to the parallel port. kevin@knysna> I have tried the following command but still no luck. kevin@knysna> ln -s /dev/lp0 lpt1 You need access to/dev/parportX Wine registry key: HKCU\Software\Wine\VDM\ppdev should point to the parport device. You need a Win95/98(?) program that doesn direct port access and doesn't need a driver. Then run with +DEBUGMSG=+int and look if any access is trapped. Perhaps you need to adjust things. Bye -- Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------