Hello everybody, I'm trying to get work a win32 application (for NT) that communicate with a lots of modems (30-40). No problems if I configure the modem on the first two com ports, but I cannot make it run if I ask it to use, for example, COM10, COM11, etc.. The command is: wine --winver nt40 gpcwin.exe Here is the error: fixme:win32:DEVICE_Open Unknown VxD COM10. Try --winver nt40 or win31 ! err:progress:ProgressWindowProc unknown msg be10 wp=1ef40001 lp=00001ef4 err:progress:ProgressWindowProc unknown msg be10 wp=1f900001 lp=00001f90 err:progress:ProgressWindowProc unknown msg be10 wp=202c0001 lp=0000202c etc. etc. I tried to set the COM definition in the registry file system.reg [HARDWARE\\DEVICEMAP\\SERIALCOMM] 1015709345 "Serial0"="COM1" "Serial1"="COM2" "Serial10"="COM11" "Serial9"="COM10" as WinNT does, but no way. The COM10,11,12,etc. are virtual com port (com ports over tcp/ip) that work if I map them on the first two system com ports (Com1 and Com2 in the ~/.wine/config file). Any help will be appreciated. Thank you Stefano
> Hello everybody, > I'm trying to get work a win32 application (for NT) that communicate > with a lots of modems (30-40). > No problems if I configure the modem on the first two com ports, but I > cannot make it run if I ask it to use, for example, COM10, COM11, etc.. > The command is: > wine --winver nt40 gpcwin.exe > Here is the error: > fixme:win32:DEVICE_Open Unknown VxD COM10. Try --winver nt40 or win31 ! > err:progress:ProgressWindowProc unknown msg be10 wp=1ef40001 lp=00001ef4 > err:progress:ProgressWindowProc unknown msg be10 wp=1f900001 lp=00001f90 > err:progress:ProgressWindowProc unknown msg be10 wp=202c0001 lp=0000202c > etc. etc. > > I tried to set the COM definition in the registry file system.reg > [HARDWARE\\DEVICEMAP\\SERIALCOMM] 1015709345 > "Serial0"="COM1" > "Serial1"="COM2" > "Serial10"="COM11" > "Serial9"="COM10" > > as WinNT does, but no way. > > The COM10,11,12,etc. are virtual com port (com ports over tcp/ip) that > work if I map them on the first two system com ports (Com1 and Com2 in > the ~/.wine/config file). > > Any help will be appreciated. > > Thank you > > Stefano >