thr3ads.net - Virtualization - [PATCH net-next 5/6] net: use core MTU range checking in virt drivers [Oct 2016]

If this information is useful, please help other people find it:
Share via:

Jarod Wilson

2016-Oct-19 02:33 UTC

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

hyperv_net:
- set min/max_mtu

virtio_net:
- set min/max_mtu
- remove virtnet_change_mtu

vmxnet3:
- set min/max_mtu

CC: netdev at vger.kernel.org
CC: virtualization at lists.linux-foundation.org
CC: "K. Y. Srinivasan" <kys at microsoft.com>
CC: Haiyang Zhang <haiyangz at microsoft.com>
CC: "Michael S. Tsirkin" <mst at redhat.com>
CC: Shrikrishna Khare <skhare at vmware.com>
CC: "VMware, Inc." <pv-drivers at vmware.com>
Signed-off-by: Jarod Wilson <jarod at redhat.com>
---
 drivers/net/hyperv/hyperv_net.h   |  4 ++--
 drivers/net/hyperv/netvsc_drv.c   | 14 +++++++-------
 drivers/net/virtio_net.c          | 23 ++++++++++-------------
 drivers/net/vmxnet3/vmxnet3_drv.c |  7 ++++---
 4 files changed, 23 insertions(+), 25 deletions(-)

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index f4fbcb5..3958ada 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -606,8 +606,8 @@ struct nvsp_message {
 } __packed;
 
 
-#define NETVSC_MTU 65536
-#define NETVSC_MTU_MIN 68
+#define NETVSC_MTU 65535
+#define NETVSC_MTU_MIN ETH_MIN_MTU
 
 #define NETVSC_RECEIVE_BUFFER_SIZE		(1024*1024*16)	/* 16MB */
 #define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY	(1024*1024*15)  /* 15MB */
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index f0919bd..3dc9679 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -872,19 +872,12 @@ static int netvsc_change_mtu(struct net_device *ndev, int
mtu)
 	struct netvsc_device *nvdev = ndevctx->nvdev;
 	struct hv_device *hdev = ndevctx->device_ctx;
 	struct netvsc_device_info device_info;
-	int limit = ETH_DATA_LEN;
 	u32 num_chn;
 	int ret = 0;
 
 	if (ndevctx->start_remove || !nvdev || nvdev->destroy)
 		return -ENODEV;
 
-	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
-		limit = NETVSC_MTU - ETH_HLEN;
-
-	if (mtu < NETVSC_MTU_MIN || mtu > limit)
-		return -EINVAL;
-
 	ret = netvsc_close(ndev);
 	if (ret)
 		goto out;
@@ -1343,6 +1336,13 @@ static int netvsc_probe(struct hv_device *dev,
 
 	netif_carrier_off(net);
 
+	/* MTU range: 68 - 1500 or 65521 */
+	net->min_mtu = NETVSC_MTU_MIN;
+	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
+		net->max_mtu = NETVSC_MTU - ETH_HLEN;
+	else
+		net->max_mtu = ETH_DATA_LEN;
+
 	netvsc_init_settings(net);
 
 	net_device_ctx = netdev_priv(net);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index fad84f3..4885a42 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1419,17 +1419,6 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
 	.set_settings = virtnet_set_settings,
 };
 
-#define MIN_MTU 68
-#define MAX_MTU 65535
-
-static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
-{
-	if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
-		return -EINVAL;
-	dev->mtu = new_mtu;
-	return 0;
-}
-
 static const struct net_device_ops virtnet_netdev = {
 	.ndo_open            = virtnet_open,
 	.ndo_stop   	     = virtnet_close,
@@ -1437,7 +1426,6 @@ static const struct net_device_ops virtnet_netdev = {
 	.ndo_validate_addr   = eth_validate_addr,
 	.ndo_set_mac_address = virtnet_set_mac_address,
 	.ndo_set_rx_mode     = virtnet_set_rx_mode,
-	.ndo_change_mtu	     = virtnet_change_mtu,
 	.ndo_get_stats64     = virtnet_stats,
 	.ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
@@ -1748,6 +1736,9 @@ static bool virtnet_validate_features(struct virtio_device
*vdev)
 	return true;
 }
 
+#define MIN_MTU ETH_MIN_MTU
+#define MAX_MTU 65535
+
 static int virtnet_probe(struct virtio_device *vdev)
 {
 	int i, err;
@@ -1821,6 +1812,10 @@ static int virtnet_probe(struct virtio_device *vdev)
 
 	dev->vlan_features = dev->features;
 
+	/* MTU range: 68 - 65535 */
+	dev->min_mtu = MIN_MTU;
+	dev->max_mtu = MAX_MTU;
+
 	/* Configuration may specify what MAC to use.  Otherwise random. */
 	if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
 		virtio_cread_bytes(vdev,
@@ -1875,8 +1870,10 @@ static int virtnet_probe(struct virtio_device *vdev)
 		mtu = virtio_cread16(vdev,
 				     offsetof(struct virtio_net_config,
 					      mtu));
-		if (virtnet_change_mtu(dev, mtu))
+		if (mtu >= dev->min_mtu && mtu <= dev->max_mtu) {
+			dev->mtu = mtu;
 			__virtio_clear_bit(vdev, VIRTIO_NET_F_MTU);
+		}
 	}
 
 	if (vi->any_header_sg)
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c
b/drivers/net/vmxnet3/vmxnet3_drv.c
index b5554f2..0c36de1 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2969,9 +2969,6 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu)
 	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
 	int err = 0;
 
-	if (new_mtu < VMXNET3_MIN_MTU || new_mtu > VMXNET3_MAX_MTU)
-		return -EINVAL;
-
 	netdev->mtu = new_mtu;
 
 	/*
@@ -3428,6 +3425,10 @@ vmxnet3_probe_device(struct pci_dev *pdev,
 	vmxnet3_set_ethtool_ops(netdev);
 	netdev->watchdog_timeo = 5 * HZ;
 
+	/* MTU range: 60 - 9000 */
+	netdev->min_mtu = VMXNET3_MIN_MTU;
+	netdev->max_mtu = VMXNET3_MAX_MTU;
+
 	INIT_WORK(&adapter->work, vmxnet3_reset_work);
 	set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
 
-- 
2.10.0

Aaron Conole

2016-Oct-19 13:06 UTC

head link

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

Jarod Wilson <jarod at redhat.com> writes:
> hyperv_net:
> - set min/max_mtu
>
> virtio_net:
> - set min/max_mtu
> - remove virtnet_change_mtu
>
> vmxnet3:
> - set min/max_mtu
>
> CC: netdev at vger.kernel.org
> CC: virtualization at lists.linux-foundation.org
> CC: "K. Y. Srinivasan" <kys at microsoft.com>
> CC: Haiyang Zhang <haiyangz at microsoft.com>
> CC: "Michael S. Tsirkin" <mst at redhat.com>
> CC: Shrikrishna Khare <skhare at vmware.com>
> CC: "VMware, Inc." <pv-drivers at vmware.com>
> Signed-off-by: Jarod Wilson <jarod at redhat.com>
> ---

The virtnet change looks good to me.  It simplifies an enhancement that
I was about to propose, so I'll let yours land first.

-Aaron

Michael S. Tsirkin

2016-Oct-19 13:59 UTC

head link

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

On Tue, Oct 18, 2016 at 10:33:32PM -0400, Jarod Wilson
wrote:> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index fad84f3..4885a42 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -1419,17 +1419,6 @@ static const struct ethtool_ops virtnet_ethtool_ops
= {
>  	.set_settings = virtnet_set_settings,
>  };
>  
> -#define MIN_MTU 68
> -#define MAX_MTU 65535
> -
> -static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
> -{
> -	if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
> -		return -EINVAL;
> -	dev->mtu = new_mtu;
> -	return 0;
> -}
> -
>  static const struct net_device_ops virtnet_netdev = {
>  	.ndo_open            = virtnet_open,
>  	.ndo_stop   	     = virtnet_close,
> @@ -1437,7 +1426,6 @@ static const struct net_device_ops virtnet_netdev = {
>  	.ndo_validate_addr   = eth_validate_addr,
>  	.ndo_set_mac_address = virtnet_set_mac_address,
>  	.ndo_set_rx_mode     = virtnet_set_rx_mode,
> -	.ndo_change_mtu	     = virtnet_change_mtu,
>  	.ndo_get_stats64     = virtnet_stats,
>  	.ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
>  	.ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
> @@ -1748,6 +1736,9 @@ static bool virtnet_validate_features(struct
virtio_device *vdev)
>  	return true;
>  }
>  
> +#define MIN_MTU ETH_MIN_MTU
> +#define MAX_MTU 65535
> +
Do we need a common macro for this?
>  static int virtnet_probe(struct virtio_device *vdev)
>  {
>  	int i, err;
> @@ -1821,6 +1812,10 @@ static int virtnet_probe(struct virtio_device *vdev)
>  
>  	dev->vlan_features = dev->features;
>  
> +	/* MTU range: 68 - 65535 */
> +	dev->min_mtu = MIN_MTU;
> +	dev->max_mtu = MAX_MTU;
> +
>  	/* Configuration may specify what MAC to use.  Otherwise random. */
>  	if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
>  		virtio_cread_bytes(vdev,
> @@ -1875,8 +1870,10 @@ static int virtnet_probe(struct virtio_device *vdev)
>  		mtu = virtio_cread16(vdev,
>  				     offsetof(struct virtio_net_config,
>  					      mtu));
> -		if (virtnet_change_mtu(dev, mtu))
> +		if (mtu >= dev->min_mtu && mtu <= dev->max_mtu) {
> +			dev->mtu = mtu;
>  			__virtio_clear_bit(vdev, VIRTIO_NET_F_MTU);
I think the logic is wrong here:

If mtu is legal, we set it but do not tell host.
If it's out of range we tell host we use it
but don't actually.

Should be the reverse.
> +		}
>  	}
>  
>  	if (vi->any_header_sg)
-- 
MST

Michael S. Tsirkin

2016-Oct-19 14:03 UTC

head link

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

On Wed, Oct 19, 2016 at 04:59:46PM +0300, Michael S. Tsirkin
wrote:> On Tue, Oct 18, 2016 at 10:33:32PM -0400, Jarod Wilson wrote:
> > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > index fad84f3..4885a42 100644
> > --- a/drivers/net/virtio_net.c
> > +++ b/drivers/net/virtio_net.c
> > @@ -1419,17 +1419,6 @@ static const struct ethtool_ops
virtnet_ethtool_ops = {
> >  	.set_settings = virtnet_set_settings,
> >  };
> >  
> > -#define MIN_MTU 68
> > -#define MAX_MTU 65535
> > -
> > -static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
> > -{
> > -	if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
> > -		return -EINVAL;
> > -	dev->mtu = new_mtu;
> > -	return 0;
> > -}
> > -
> >  static const struct net_device_ops virtnet_netdev = {
> >  	.ndo_open            = virtnet_open,
> >  	.ndo_stop   	     = virtnet_close,
> > @@ -1437,7 +1426,6 @@ static const struct net_device_ops
virtnet_netdev = {
> >  	.ndo_validate_addr   = eth_validate_addr,
> >  	.ndo_set_mac_address = virtnet_set_mac_address,
> >  	.ndo_set_rx_mode     = virtnet_set_rx_mode,
> > -	.ndo_change_mtu	     = virtnet_change_mtu,
> >  	.ndo_get_stats64     = virtnet_stats,
> >  	.ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
> >  	.ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
> > @@ -1748,6 +1736,9 @@ static bool virtnet_validate_features(struct
virtio_device *vdev)
> >  	return true;
> >  }
> >  
> > +#define MIN_MTU ETH_MIN_MTU
> > +#define MAX_MTU 65535
> > +
> 
> Do we need a common macro for this?
I think it's actually IP_MAX_MTU.
> >  static int virtnet_probe(struct virtio_device *vdev)
> >  {
> >  	int i, err;
> > @@ -1821,6 +1812,10 @@ static int virtnet_probe(struct virtio_device
*vdev)
> >  
> >  	dev->vlan_features = dev->features;
> >  
> > +	/* MTU range: 68 - 65535 */
> > +	dev->min_mtu = MIN_MTU;
> > +	dev->max_mtu = MAX_MTU;
> > +
> >  	/* Configuration may specify what MAC to use.  Otherwise random. */
> >  	if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
> >  		virtio_cread_bytes(vdev,
> > @@ -1875,8 +1870,10 @@ static int virtnet_probe(struct virtio_device
*vdev)
> >  		mtu = virtio_cread16(vdev,
> >  				     offsetof(struct virtio_net_config,
> >  					      mtu));
> > -		if (virtnet_change_mtu(dev, mtu))
> > +		if (mtu >= dev->min_mtu && mtu <= dev->max_mtu)
{
> > +			dev->mtu = mtu;
> >  			__virtio_clear_bit(vdev, VIRTIO_NET_F_MTU);
> 
> I think the logic is wrong here:
> 
> If mtu is legal, we set it but do not tell host.
> If it's out of range we tell host we use it
> but don't actually.
> 
> Should be the reverse.
> 
> > +		}
> >  	}
> >  
> >  	if (vi->any_header_sg)
> 
> -- 
> MST

Haiyang Zhang

2016-Oct-19 14:07 UTC

head link

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

> -----Original Message-----
> From: Jarod Wilson [mailto:jarod at redhat.com]
> Sent: Tuesday, October 18, 2016 10:34 PM
> To: linux-kernel at vger.kernel.org
> Cc: Jarod Wilson <jarod at redhat.com>; netdev at vger.kernel.org;
> virtualization at lists.linux-foundation.org; KY Srinivasan
> <kys at microsoft.com>; Haiyang Zhang <haiyangz at
microsoft.com>; Michael S.
> Tsirkin <mst at redhat.com>; Shrikrishna Khare <skhare at
vmware.com>; VMware,
> Inc. <pv-drivers at vmware.com>
> Subject: [PATCH net-next 5/6] net: use core MTU range checking in virt
> drivers
> 
> hyperv_net:
> - set min/max_mtu
> 
> virtio_net:
> - set min/max_mtu
> - remove virtnet_change_mtu
> 
> vmxnet3:
> - set min/max_mtu
> 
> CC: netdev at vger.kernel.org
> CC: virtualization at lists.linux-foundation.org
> CC: "K. Y. Srinivasan" <kys at microsoft.com>
> CC: Haiyang Zhang <haiyangz at microsoft.com>
> CC: "Michael S. Tsirkin" <mst at redhat.com>
> CC: Shrikrishna Khare <skhare at vmware.com>
> CC: "VMware, Inc." <pv-drivers at vmware.com>
> Signed-off-by: Jarod Wilson <jarod at redhat.com>
> ---
>  drivers/net/hyperv/hyperv_net.h   |  4 ++--
>  drivers/net/hyperv/netvsc_drv.c   | 14 +++++++-------
>  drivers/net/virtio_net.c          | 23 ++++++++++-------------
>  drivers/net/vmxnet3/vmxnet3_drv.c |  7 ++++---
>  4 files changed, 23 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/net/hyperv/hyperv_net.h
> b/drivers/net/hyperv/hyperv_net.h
> index f4fbcb5..3958ada 100644
> --- a/drivers/net/hyperv/hyperv_net.h
> +++ b/drivers/net/hyperv/hyperv_net.h
> @@ -606,8 +606,8 @@ struct nvsp_message {
>  } __packed;
> 
> 
> -#define NETVSC_MTU 65536
> -#define NETVSC_MTU_MIN 68
> +#define NETVSC_MTU 65535
Why change it to 65535? For Hyperv host, this should be 65536.

> @@ -1343,6 +1336,13 @@ static int netvsc_probe(struct hv_device *dev,
> 
>  	netif_carrier_off(net);
> 
> +	/* MTU range: 68 - 1500 or 65521 */
> +	net->min_mtu = NETVSC_MTU_MIN;
> +	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
> +		net->max_mtu = NETVSC_MTU - ETH_HLEN;
> +	else
> +		net->max_mtu = ETH_DATA_LEN;
> +
>  	netvsc_init_settings(net);
> 
>  	net_device_ctx = netdev_priv(net);
nvdev->nvsp_version is not set until after rndis_filter_device_add()
is successfully completed.
You need to move this part to the place just before this line:
 ret = register_netdev(net);

Thanks,
- Haiyang

Jarod Wilson

2016-Oct-19 14:15 UTC

head link

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

On Wed, Oct 19, 2016 at 04:59:46PM +0300, Michael S. Tsirkin
wrote:> On Tue, Oct 18, 2016 at 10:33:32PM -0400, Jarod Wilson wrote:
> > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > index fad84f3..4885a42 100644
> > --- a/drivers/net/virtio_net.c
> > +++ b/drivers/net/virtio_net.c
> > @@ -1419,17 +1419,6 @@ static const struct ethtool_ops
virtnet_ethtool_ops = {
> >  	.set_settings = virtnet_set_settings,
> >  };
> >  
> > -#define MIN_MTU 68
> > -#define MAX_MTU 65535
> > -
> > -static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
> > -{
> > -	if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
> > -		return -EINVAL;
> > -	dev->mtu = new_mtu;
> > -	return 0;
> > -}
> > -
> >  static const struct net_device_ops virtnet_netdev = {
> >  	.ndo_open            = virtnet_open,
> >  	.ndo_stop   	     = virtnet_close,
> > @@ -1437,7 +1426,6 @@ static const struct net_device_ops
virtnet_netdev = {
> >  	.ndo_validate_addr   = eth_validate_addr,
> >  	.ndo_set_mac_address = virtnet_set_mac_address,
> >  	.ndo_set_rx_mode     = virtnet_set_rx_mode,
> > -	.ndo_change_mtu	     = virtnet_change_mtu,
> >  	.ndo_get_stats64     = virtnet_stats,
> >  	.ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
> >  	.ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
> > @@ -1748,6 +1736,9 @@ static bool virtnet_validate_features(struct
virtio_device *vdev)
> >  	return true;
> >  }
> >  
> > +#define MIN_MTU ETH_MIN_MTU
> > +#define MAX_MTU 65535
> > +
> 
> Do we need a common macro for this?
Probably. That value crops up in multiple drivers.
> >  static int virtnet_probe(struct virtio_device *vdev)
> >  {
> >  	int i, err;
> > @@ -1821,6 +1812,10 @@ static int virtnet_probe(struct virtio_device
*vdev)
> >  
> >  	dev->vlan_features = dev->features;
> >  
> > +	/* MTU range: 68 - 65535 */
> > +	dev->min_mtu = MIN_MTU;
> > +	dev->max_mtu = MAX_MTU;
> > +
> >  	/* Configuration may specify what MAC to use.  Otherwise random. */
> >  	if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
> >  		virtio_cread_bytes(vdev,
> > @@ -1875,8 +1870,10 @@ static int virtnet_probe(struct virtio_device
*vdev)
> >  		mtu = virtio_cread16(vdev,
> >  				     offsetof(struct virtio_net_config,
> >  					      mtu));
> > -		if (virtnet_change_mtu(dev, mtu))
> > +		if (mtu >= dev->min_mtu && mtu <= dev->max_mtu)
{
> > +			dev->mtu = mtu;
> >  			__virtio_clear_bit(vdev, VIRTIO_NET_F_MTU);
> 
> I think the logic is wrong here:
> 
> If mtu is legal, we set it but do not tell host.
> If it's out of range we tell host we use it
> but don't actually.
> 
> Should be the reverse.
Ah, yes, looks like it should be:

                if (mtu < dev->min_mtu || mtu > dev->max_mtu)
                        __virtio_clear_bit(vdev, VIRTIO_NET_F_MTU);
                else
                        dev->mtu = mtu;

-- 
Jarod Wilson
jarod at redhat.com

Jarod Wilson

2016-Oct-19 14:23 UTC

head link

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

On Wed, Oct 19, 2016 at 02:07:47PM +0000, Haiyang Zhang
wrote:> 
> 
> > -----Original Message-----
> > From: Jarod Wilson [mailto:jarod at redhat.com]
> > Sent: Tuesday, October 18, 2016 10:34 PM
> > To: linux-kernel at vger.kernel.org
> > Cc: Jarod Wilson <jarod at redhat.com>; netdev at
vger.kernel.org;
> > virtualization at lists.linux-foundation.org; KY Srinivasan
> > <kys at microsoft.com>; Haiyang Zhang <haiyangz at
microsoft.com>; Michael S.
> > Tsirkin <mst at redhat.com>; Shrikrishna Khare <skhare at
vmware.com>; VMware,
> > Inc. <pv-drivers at vmware.com>
> > Subject: [PATCH net-next 5/6] net: use core MTU range checking in virt
> > drivers
> > 
> > hyperv_net:
> > - set min/max_mtu
> > 
> > virtio_net:
> > - set min/max_mtu
> > - remove virtnet_change_mtu
> > 
> > vmxnet3:
> > - set min/max_mtu
> > 
> > CC: netdev at vger.kernel.org
> > CC: virtualization at lists.linux-foundation.org
> > CC: "K. Y. Srinivasan" <kys at microsoft.com>
> > CC: Haiyang Zhang <haiyangz at microsoft.com>
> > CC: "Michael S. Tsirkin" <mst at redhat.com>
> > CC: Shrikrishna Khare <skhare at vmware.com>
> > CC: "VMware, Inc." <pv-drivers at vmware.com>
> > Signed-off-by: Jarod Wilson <jarod at redhat.com>
> > ---
> >  drivers/net/hyperv/hyperv_net.h   |  4 ++--
> >  drivers/net/hyperv/netvsc_drv.c   | 14 +++++++-------
> >  drivers/net/virtio_net.c          | 23 ++++++++++-------------
> >  drivers/net/vmxnet3/vmxnet3_drv.c |  7 ++++---
> >  4 files changed, 23 insertions(+), 25 deletions(-)
> > 
> > diff --git a/drivers/net/hyperv/hyperv_net.h
> > b/drivers/net/hyperv/hyperv_net.h
> > index f4fbcb5..3958ada 100644
> > --- a/drivers/net/hyperv/hyperv_net.h
> > +++ b/drivers/net/hyperv/hyperv_net.h
> > @@ -606,8 +606,8 @@ struct nvsp_message {
> >  } __packed;
> > 
> > 
> > -#define NETVSC_MTU 65536
> > -#define NETVSC_MTU_MIN 68
> > +#define NETVSC_MTU 65535
> 
> Why change it to 65535? For Hyperv host, this should be 65536.
Forgot to call this change out, sorry. That was changed, because of
IP_MAX_MTU being 0xFFFFU -> 65535.
> > @@ -1343,6 +1336,13 @@ static int netvsc_probe(struct hv_device *dev,
> > 
> >  	netif_carrier_off(net);
> > 
> > +	/* MTU range: 68 - 1500 or 65521 */
> > +	net->min_mtu = NETVSC_MTU_MIN;
> > +	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
> > +		net->max_mtu = NETVSC_MTU - ETH_HLEN;
> > +	else
> > +		net->max_mtu = ETH_DATA_LEN;
> > +
> >  	netvsc_init_settings(net);
> > 
> >  	net_device_ctx = netdev_priv(net);
> 
> nvdev->nvsp_version is not set until after rndis_filter_device_add()
> is successfully completed.
> You need to move this part to the place just before this line:
>  ret = register_netdev(net);
Okay, will fix that up.

-- 
Jarod Wilson
jarod at redhat.com

Shrikrishna Khare

2016-Oct-19 22:21 UTC

head link

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

On Wed, 19 Oct 2016, Jarod Wilson wrote:
> hyperv_net:
> - set min/max_mtu
> 
> virtio_net:
> - set min/max_mtu
> - remove virtnet_change_mtu
> 
> vmxnet3:
> - set min/max_mtu
> 
> CC: netdev at vger.kernel.org
> CC: virtualization at lists.linux-foundation.org
> CC: "K. Y. Srinivasan" <kys at microsoft.com>
> CC: Haiyang Zhang <haiyangz at microsoft.com>
> CC: "Michael S. Tsirkin" <mst at redhat.com>
> CC: Shrikrishna Khare <skhare at vmware.com>
> CC: "VMware, Inc." <pv-drivers at vmware.com>
> Signed-off-by: Jarod Wilson <jarod at redhat.com>
> ---
The vmxnet3 part of the change looks good to me.

Thanks,
Shri

Seemingly Similar Threads

Search for more apparently analagous threads

Virtualization - Oct 2016 - [PATCH net-next 5/6] net: use core MTU range checking in virt drivers

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

[PATCH net-next 5/6] net: use core MTU range checking in virt drivers

Seemingly Similar Threads