Virtualization - Feb 2014 - [PATCH v4 RFC 0/3] virtio: add 'device_lost' to virtio_device

On 23/01/14 05:51, Rusty Russell wrote:
> Heinz Graalfs <graalfs at linux.vnet.ibm.com> writes:
>> Hi, here is my v4 patch-set update to the v3 RFC submitted on Nov 27th.
>
> Hi Heinz,
>
>          I didn't get a response on my 'break all the
virtqueues' patch
> series.  Could your System Z code work with this?
>
> Rusty.
>
>
Sorry Rusty, I'm back as of today.

I applied your patch series and did some testing...

Removing a disk while reading from it mostly still ends up
in hangs as of below:

PID: 13     TASK: 163f8000          CPU: 0   COMMAND: "kworker/u128:1"
  #0 [163f72e0] __schedule at 6aa22c
  #1 [163f7428] io_schedule at 6aab6c
  #2 [163f7448] sleep_on_page at 22cbb2
  #3 [163f7460] __wait_on_bit at 6ab394
  #4 [163f74b0] wait_on_page_bit at 22cef4
  #5 [163f7508] filemap_fdatawait_range at 22d0a6
  #6 [163f75e8] filemap_write_and_wait at 22de62
  #7 [163f7618] fsync_bdev at 2dc5d8
  #8 [163f7640] invalidate_partition at 407ba8
  #9 [163f7668] del_gendisk at 408a4c
#10 [163f76c0] virtblk_remove at 46f81e
#11 [163f76f8] virtio_dev_remove at 43d302
#12 [163f7730] __device_release_driver at 4604c4
#13 [163f7758] device_release_driver at 46057c
#14 [163f7780] bus_remove_device at 45ff74
#15 [163f77b0] device_del at 45cf54
#16 [163f77e8] device_unregister at 45d00e
#17 [163f7808] unregister_virtio_device at 43d5ba
#18 [163f7828] virtio_ccw_remove at 55156c
#19 [163f7850] ccw_device_remove at 4d7e22
#20 [163f78d8] __device_release_driver at 4604c4
#21 [163f7900] device_release_driver at 46057c
#22 [163f7928] bus_remove_device at 45ff74
#23 [163f7958] device_del at 45cf54
#24 [163f7990] ccw_device_unregister at 4d86a0
#25 [163f79b0] io_subchannel_remove at 4d8d1a
#26 [163f79e8] css_remove at 4d2856
#27 [163f7a08] __device_release_driver at 4604c4
#28 [163f7a30] device_release_driver at 46057c
#29 [163f7a58] bus_remove_device at 45ff74
#30 [163f7a88] device_del at 45cf54
#31 [163f7ac0] device_unregister at 45d00e
#32 [163f7ae0] css_sch_device_unregister at 4d29d4
#33 [163f7b08] io_subchannel_sch_event at 4daad6
#34 [163f7b80] css_evaluate_known_subchannel at 4d2cc0
#35 [163f7be0] slow_eval_known_fn at 4d3cea
#36 [163f7c10] bus_for_each_dev at 45ea56
#37 [163f7c50] for_each_subchannel_staged at 4d337e
#38 [163f7c98] css_slow_path_func at 4d3450
#39 [163f7cc0] process_one_work at 164ff4
#40 [163f7d60] worker_thread at 166500
#41 [163f7da8] kthread at 16e67c
#42 [163f7eb0] kernel_thread_starter at 6b0a5e

Removing a disk while writing to it now ends up mostly
with errors (which is new behavior and good).
However, the detached device is still listed under /dev, and a 
subsequent umount ends up in a hang. Latter also occurred with
my approach, sometimes.

Sometimes everything ends up in QEMU crashes, which is, however, not 
reproducible. I will investigate on this.

Heinz
>> When an active virtio block device is hot-unplugged from a KVM guest,
>> affected guest user applications are not aware of any errors that occur
>> due to the lost device. This patch-set adds code to avoid further
request
>> queueing when a lost block device is detected, resulting in appropriate
>> error info. Additionally a potential hang situation can be avoided by
not
>> waiting for requests (e.g. in-flight requests) in blk_cleanup_queue()
that
>> will never complete.
>>
>> On System z there exists no handshake mechanism between host and guest
>> when a device is hot-unplugged. The device is removed and no further
I/O
>> is possible.
>>
>> When an online channel device disappears on System z the kernel's
CIO layer
>> informs the driver (virtio_ccw) about the lost device.
>>
>> Here are some more error details:
>>
>> For a particular block device virtio's request function
virtblk_request()
>> is called by the block layer to queue requests to be handled by the
host.
>> In case of a lost device requests can still be queued, but an
appropriate
>> subsequent host kick usually fails. This leads to situations where no
error
>> feedback is shown.
>>
>> In order to prevent request queueing for lost devices appropriate
settings
>> in the block layer should be made. Exploiting System z's CIO notify
handler
>> callback, and passing on device loss information via the
surprize_removal
>> flag to the remove callback of the backend driver, can solve this task.
>>
>> v3->v4 changes:
>>   - patch 1: solves some vcdev pointer handling issues in the
virtio_ccw driver
>>     (e.g. locked vcdev pointer reset/query; serialize
remove()/set_offline()
>>     callback processing).
>>   - patch 2: introduces 'device_lost' atomic in virtio_device
and use in
>>     backend driver virtio_blk accordingly (original 3 patches merged).
>>   - patch 3: the notify() callback is now serialized with
remove()/set_offline()
>>     callbacks. The notification is ignored if the vcdev pointer has
been cleared
>>     already (by remove() or set_offline()).
>>
>> v2->v3 changes:
>>   - remove virtio_driver's notify callback (and appropriate code)
introduced
>>     in my v1 RFC
>>   - introduce 'surprize_removal' in struct virtio_device
>>   - change virtio_blk's remove callback to perform special actions
when the
>>     surprize_removal flag is set
>>     - avoid final I/O by preventing further request queueing
>>     - avoid hangs in blk_cleanup_queue() due to waits on
'in-flight' requests
>>   - set surprize_removal in virtio_ccw's notify callback when a
device is lost
>>
>> v1->v2 changes:
>>   - add include of linux/notifier.h (I also added it to the 3rd patch)
>>   - get queue lock in order to be able to use safe queue_flag_set()
functions
>>     in virtblk_notify() handler
>>
>>
>> Heinz Graalfs (3):
>>    virtio_ccw: fix vcdev pointer handling issues
>>    virtio: introduce 'device_lost' flag in virtio_device
>>    virtio_ccw: set 'device_lost' on CIO_GONE notification
>>
>>   drivers/block/virtio_blk.c    | 14 ++++++++++-
>>   drivers/s390/kvm/virtio_ccw.c | 58
++++++++++++++++++++++++++++++++++++-------
>>   include/linux/virtio.h        |  2 ++
>>   3 files changed, 64 insertions(+), 10 deletions(-)
>>
>> --
>> 1.8.3.1
>

Heinz Graalfs <graalfs at linux.vnet.ibm.com>
writes:
> On 23/01/14 05:51, Rusty Russell wrote:
>> Heinz Graalfs <graalfs at linux.vnet.ibm.com> writes:
>>> Hi, here is my v4 patch-set update to the v3 RFC submitted on Nov
27th.
>>
>> Hi Heinz,
>>
>>          I didn't get a response on my 'break all the
virtqueues' patch
>> series.  Could your System Z code work with this?
>>
>> Rusty.
>>
>>
>
> Sorry Rusty, I'm back as of today.
>
> I applied your patch series and did some testing...
>
> Removing a disk while reading from it mostly still ends up
> in hangs as of below:
OK, we still have the problem of in-flight requests.

I think the correct answer is to drop all requests if the virtqueue
is broken:

 -	blk_cleanup_queue(vblk->disk->queue);
 +	if (virtqueue_is_broken(vblk->vq))
 +              /* Don't wait for completion, just drop queue. */
 +              blk_abandon_queue(vblk->disk->queue);
 +      else
 +		blk_cleanup_queue(vblk->disk->queue);
 +

Unfortunately blk_abandon_queue() doesn't exist.  Your previous patch
did nothing in that path, which I suspect may leak memory.  That may be
acceptable given that this Shouldn't Happen (often).

At this point, I ask Jens :)

Cheers,
Rusty.
>
> PID: 13     TASK: 163f8000          CPU: 0   COMMAND:
"kworker/u128:1"
>   #0 [163f72e0] __schedule at 6aa22c
>   #1 [163f7428] io_schedule at 6aab6c
>   #2 [163f7448] sleep_on_page at 22cbb2
>   #3 [163f7460] __wait_on_bit at 6ab394
>   #4 [163f74b0] wait_on_page_bit at 22cef4
>   #5 [163f7508] filemap_fdatawait_range at 22d0a6
>   #6 [163f75e8] filemap_write_and_wait at 22de62
>   #7 [163f7618] fsync_bdev at 2dc5d8
>   #8 [163f7640] invalidate_partition at 407ba8
>   #9 [163f7668] del_gendisk at 408a4c
> #10 [163f76c0] virtblk_remove at 46f81e
> #11 [163f76f8] virtio_dev_remove at 43d302
> #12 [163f7730] __device_release_driver at 4604c4
> #13 [163f7758] device_release_driver at 46057c
> #14 [163f7780] bus_remove_device at 45ff74
> #15 [163f77b0] device_del at 45cf54
> #16 [163f77e8] device_unregister at 45d00e
> #17 [163f7808] unregister_virtio_device at 43d5ba
> #18 [163f7828] virtio_ccw_remove at 55156c
> #19 [163f7850] ccw_device_remove at 4d7e22
> #20 [163f78d8] __device_release_driver at 4604c4
> #21 [163f7900] device_release_driver at 46057c
> #22 [163f7928] bus_remove_device at 45ff74
> #23 [163f7958] device_del at 45cf54
> #24 [163f7990] ccw_device_unregister at 4d86a0
> #25 [163f79b0] io_subchannel_remove at 4d8d1a
> #26 [163f79e8] css_remove at 4d2856
> #27 [163f7a08] __device_release_driver at 4604c4
> #28 [163f7a30] device_release_driver at 46057c
> #29 [163f7a58] bus_remove_device at 45ff74
> #30 [163f7a88] device_del at 45cf54
> #31 [163f7ac0] device_unregister at 45d00e
> #32 [163f7ae0] css_sch_device_unregister at 4d29d4
> #33 [163f7b08] io_subchannel_sch_event at 4daad6
> #34 [163f7b80] css_evaluate_known_subchannel at 4d2cc0
> #35 [163f7be0] slow_eval_known_fn at 4d3cea
> #36 [163f7c10] bus_for_each_dev at 45ea56
> #37 [163f7c50] for_each_subchannel_staged at 4d337e
> #38 [163f7c98] css_slow_path_func at 4d3450
> #39 [163f7cc0] process_one_work at 164ff4
> #40 [163f7d60] worker_thread at 166500
> #41 [163f7da8] kthread at 16e67c
> #42 [163f7eb0] kernel_thread_starter at 6b0a5e
>
> Removing a disk while writing to it now ends up mostly
> with errors (which is new behavior and good).
> However, the detached device is still listed under /dev, and a 
> subsequent umount ends up in a hang. Latter also occurred with
> my approach, sometimes.
>
> Sometimes everything ends up in QEMU crashes, which is, however, not 
> reproducible. I will investigate on this.
>
> Heinz
>
>>> When an active virtio block device is hot-unplugged from a KVM
guest,
>>> affected guest user applications are not aware of any errors that
occur
>>> due to the lost device. This patch-set adds code to avoid further
request
>>> queueing when a lost block device is detected, resulting in
appropriate
>>> error info. Additionally a potential hang situation can be avoided
by not
>>> waiting for requests (e.g. in-flight requests) in
blk_cleanup_queue() that
>>> will never complete.
>>>
>>> On System z there exists no handshake mechanism between host and
guest
>>> when a device is hot-unplugged. The device is removed and no
further I/O
>>> is possible.
>>>
>>> When an online channel device disappears on System z the
kernel's CIO layer
>>> informs the driver (virtio_ccw) about the lost device.
>>>
>>> Here are some more error details:
>>>
>>> For a particular block device virtio's request function
virtblk_request()
>>> is called by the block layer to queue requests to be handled by the
host.
>>> In case of a lost device requests can still be queued, but an
appropriate
>>> subsequent host kick usually fails. This leads to situations where
no error
>>> feedback is shown.
>>>
>>> In order to prevent request queueing for lost devices appropriate
settings
>>> in the block layer should be made. Exploiting System z's CIO
notify handler
>>> callback, and passing on device loss information via the
surprize_removal
>>> flag to the remove callback of the backend driver, can solve this
task.
>>>
>>> v3->v4 changes:
>>>   - patch 1: solves some vcdev pointer handling issues in the
virtio_ccw driver
>>>     (e.g. locked vcdev pointer reset/query; serialize
remove()/set_offline()
>>>     callback processing).
>>>   - patch 2: introduces 'device_lost' atomic in
virtio_device and use in
>>>     backend driver virtio_blk accordingly (original 3 patches
merged).
>>>   - patch 3: the notify() callback is now serialized with
remove()/set_offline()
>>>     callbacks. The notification is ignored if the vcdev pointer has
been cleared
>>>     already (by remove() or set_offline()).
>>>
>>> v2->v3 changes:
>>>   - remove virtio_driver's notify callback (and appropriate
code) introduced
>>>     in my v1 RFC
>>>   - introduce 'surprize_removal' in struct virtio_device
>>>   - change virtio_blk's remove callback to perform special
actions when the
>>>     surprize_removal flag is set
>>>     - avoid final I/O by preventing further request queueing
>>>     - avoid hangs in blk_cleanup_queue() due to waits on
'in-flight' requests
>>>   - set surprize_removal in virtio_ccw's notify callback when a
device is lost
>>>
>>> v1->v2 changes:
>>>   - add include of linux/notifier.h (I also added it to the 3rd
patch)
>>>   - get queue lock in order to be able to use safe queue_flag_set()
functions
>>>     in virtblk_notify() handler
>>>
>>>
>>> Heinz Graalfs (3):
>>>    virtio_ccw: fix vcdev pointer handling issues
>>>    virtio: introduce 'device_lost' flag in virtio_device
>>>    virtio_ccw: set 'device_lost' on CIO_GONE notification
>>>
>>>   drivers/block/virtio_blk.c    | 14 ++++++++++-
>>>   drivers/s390/kvm/virtio_ccw.c | 58
++++++++++++++++++++++++++++++++++++-------
>>>   include/linux/virtio.h        |  2 ++
>>>   3 files changed, 64 insertions(+), 10 deletions(-)
>>>
>>> --
>>> 1.8.3.1
>>

On 29/01/14 07:31, Rusty Russell wrote:
> Heinz Graalfs <graalfs at linux.vnet.ibm.com> writes:
>> On 23/01/14 05:51, Rusty Russell wrote:
>>> Heinz Graalfs <graalfs at linux.vnet.ibm.com> writes:
>>>> Hi, here is my v4 patch-set update to the v3 RFC submitted on
Nov 27th.
>>>
>>> Hi Heinz,
>>>
>>>           I didn't get a response on my 'break all the
virtqueues' patch
>>> series.  Could your System Z code work with this?
>>>
>>> Rusty.
>>>
>>>
>>
>> Sorry Rusty, I'm back as of today.
>>
>> I applied your patch series and did some testing...
>>
>> Removing a disk while reading from it mostly still ends up
>> in hangs as of below:
>
> OK, we still have the problem of in-flight requests.
>
> I think the correct answer is to drop all requests if the virtqueue
> is broken:
>
>   -	blk_cleanup_queue(vblk->disk->queue);
>   +	if (virtqueue_is_broken(vblk->vq))
>   +              /* Don't wait for completion, just drop queue. */
>   +              blk_abandon_queue(vblk->disk->queue);
Rusty,

but blk_abandon_queue() would not solve the incomplete in-flight
requests, would it? I suppose it would avoid additional in-flight
requests similar to __blk_request_all() and passing -EIO.

Ending of asynchronous in-flight requests still cause other problems
in the host. Such problems should be handled/avoided there, I suppose.

Heinz
>   +      else
>   +		blk_cleanup_queue(vblk->disk->queue);
>   +
>
> Unfortunately blk_abandon_queue() doesn't exist.  Your previous patch
> did nothing in that path, which I suspect may leak memory.  That may be
> acceptable given that this Shouldn't Happen (often).
>
> At this point, I ask Jens :)
>
waiting for requests (e.g. in-flight requests) in blk_cleanup_queue()
that
> Cheers,
> Rusty.
>
>>
>> PID: 13     TASK: 163f8000          CPU: 0   COMMAND:
"kworker/u128:1"
>>    #0 [163f72e0] __schedule at 6aa22c
>>    #1 [163f7428] io_schedule at 6aab6c
>>    #2 [163f7448] sleep_on_page at 22cbb2
>>    #3 [163f7460] __wait_on_bit at 6ab394
>>    #4 [163f74b0] wait_on_page_bit at 22cef4
>>    #5 [163f7508] filemap_fdatawait_range at 22d0a6
>>    #6 [163f75e8] filemap_write_and_wait at 22de62
>>    #7 [163f7618] fsync_bdev at 2dc5d8
>>    #8 [163f7640] invalidate_partition at 407ba8
>>    #9 [163f7668] del_gendisk at 408a4c
>> #10 [163f76c0] virtblk_remove at 46f81e
>> #11 [163f76f8] virtio_dev_remove at 43d302
>> #12 [163f7730] __device_release_driver at 4604c4
waiting for requests (e.g. in-flight requests) in blk_cleanup_queue()
that
>> #13 [163f7758] device_release_driver at 46057c
>> #14 [163f7780] bus_remove_device at 45ff74
>> #15 [163f77b0] device_del at 45cf54
>> #16 [163f77e8] device_unregister at 45d00e
>> #17 [163f7808] unregister_virtio_device at 43d5ba
>> #18 [163f7828] virtio_ccw_remove at 55156c
>> #19 [163f7850] ccw_device_remove at 4d7e22
>> #20 [163f78d8] __device_release_driver at 4604c4
>> #21 [163f7900] device_release_driver at 46057c
>> #22 [163f7928] bus_remove_device at 45ff74
>> #23 [163f7958] device_del at 45cf54
>> #24 [163f7990] ccw_device_unregister at 4d86a0
>> #25 [163f79b0] io_subchannel_remove at 4d8d1a
>> #26 [163f79e8] css_remove at 4d2856
>> #27 [163f7a08] __device_release_driver at 4604c4
>> #28 [163f7a30] device_release_driver at 46057c
>> #29 [163f7a58] bus_remove_device at 45ff74
>> #30 [163f7a88] device_del at 45cf54
>> #31 [163f7ac0] device_unregister at 45d00e
>> #32 [163f7ae0] css_sch_device_unregister at 4d29d4
>> #33 [163f7b08] io_subchannel_sch_event at 4daad6
>> #34 [163f7b80] css_evaluate_known_subchannel at 4d2cc0
>> #35 [163f7be0] slow_eval_known_fn at 4d3cea
>> #36 [163f7c10] bus_for_each_dev at 45ea56
>> #37 [163f7c50] for_each_subchannel_staged at 4d337e
>> #38 [163f7c98] css_slow_path_func at 4d3450
>> #39 [163f7cc0] process_one_work at 164ff4
>> #40 [163f7d60] worker_thread at 166500
>> #41 [163f7da8] kthread at 16e67c
>> #42 [163f7eb0] kernel_thread_starter at 6b0a5e
>>
>> Removing a disk while writing to it now ends up mostly
>> with errors (which is new behavior and good).
>> However, the detached device is still listed under /dev, and a
>> subsequent umount ends up in a hang. Latter also occurred with
>> my approach, sometimes.
>>
>> Sometimes everything ends up in QEMU crashes, which is, however, not
>> reproducible. I will investigate on this.
>>
>> Heinz
>>
>>>> When an active virtio block device is hot-unplugged from a KVM
guest,
>>>> affected guest user applications are not aware of any errors
that occur
>>>> due to the lost device. This patch-set adds code to avoid
further request
>>>> queueing when a lost block device is detected, resulting in
appropriate
>>>> error info. Additionally a potential hang situation can be
avoided by not
>>>> waiting for requests (e.g. in-flight requests) in
blk_cleanup_queue() that
>>>> will never complete.
>>>>
>>>> On System z there exists no handshake mechanism between host
and guest
>>>> when a device is hot-unplugged. The device is removed and no
further I/O
>>>> is possible.
>>>>
>>>> When an online channel device disappears on System z the
kernel's CIO layer
>>>> informs the driver (virtio_ccw) about the lost device.
>>>>
>>>> Here are some more error details:
>>>>
>>>> For a particular block device virtio's request function
virtblk_request()
>>>> is called by the block layer to queue requests to be handled by
the host.
>>>> In case of a lost device requests can still be queued, but an
appropriate
>>>> subsequent host kick usually fails. This leads to situations
where no error
>>>> feedback is shown.
>>>>
>>>> In order to prevent request queueing for lost devices
appropriate settings
>>>> in the block layer should be made. Exploiting System z's
CIO notify handler
>>>> callback, and passing on device loss information via the
surprize_removal
>>>> flag to the remove callback of the backend driver, can solve
this task.
>>>>
>>>> v3->v4 changes:
>>>>    - patch 1: solves some vcdev pointer handling issues in the
virtio_ccw driver
>>>>      (e.g. locked vcdev pointer reset/query; serialize
remove()/set_offline()
>>>>      callback processing).
>>>>    - patch 2: introduces 'device_lost' atomic in
virtio_device and use in
>>>>      backend driver virtio_blk accordingly (original 3 patches
merged).
>>>>    - patch 3: the notify() callback is now serialized with
remove()/set_offline()
>>>>      callbacks. The notification is ignored if the vcdev
pointer has been cleared
>>>>      already (by remove() or set_offline()).
>>>>
>>>> v2->v3 changes:
>>>>    - remove virtio_driver's notify callback (and
appropriate code) introduced
>>>>      in my v1 RFC
>>>>    - introduce 'surprize_removal' in struct
virtio_device
>>>>    - change virtio_blk's remove callback to perform special
actions when the
>>>>      surprize_removal flag is set
>>>>      - avoid final I/O by preventing further request queueing
>>>>      - avoid hangs in blk_cleanup_queue() due to waits on
'in-flight' requests
>>>>    - set surprize_removal in virtio_ccw's notify callback
when a device is lost
>>>>
>>>> v1->v2 changes:
>>>>    - add include of linux/notifier.h (I also added it to the
3rd patch)
>>>>    - get queue lock in order to be able to use safe
queue_flag_set() functions
>>>>      in virtblk_notify() handler
>>>>
>>>>
>>>> Heinz Graalfs (3):
>>>>     virtio_ccw: fix vcdev pointer handling issues
>>>>     virtio: introduce 'device_lost' flag in
virtio_device
>>>>     virtio_ccw: set 'device_lost' on CIO_GONE
notification
>>>>
>>>>    drivers/block/virtio_blk.c    | 14 ++++++++++-
>>>>    drivers/s390/kvm/virtio_ccw.c | 58
++++++++++++++++++++++++++++++++++++-------
>>>>    include/linux/virtio.h        |  2 ++
>>>>    3 files changed, 64 insertions(+), 10 deletions(-)
>>>>
>>>> --
>>>> 1.8.3.1
>>>
>