thr3ads.net - Virtualization - [RFC-v3 0/5] vhost-scsi: Add support for host virtualized target [Aug 2012]

If this information is useful, please help other people find it:
Share via:

Nicholas A. Bellinger

2012-Aug-21 20:52 UTC

[RFC-v3 0/5] vhost-scsi: Add support for host virtualized target

From: Nicholas Bellinger <nab at linux-iscsi.org>

Hi folks,

This is the third RFC for vhost-scsi patches against mainline QEMU v1.1
to support the upstream tcm_vhost host virtualized target driver now
available in v3.6-rc kernel code.  This series is based upon last week's
commit 346fe0c4c0b, and is aiming for a future QEMU v1.3 merge.

The patch series is available directly from:

   git://git.kernel.org/pub/scm/virt/kvm/nab/qemu-kvm.git vhost-scsi-merge-v3

This -v3 series contains further review changes based upon feedback from
MST, Paolo, and Blue.  It also contains the changes to function against
the changes in target-pending/master -> headed for v3.6-rc3 code.

Changes from v3 -> v2:

 - Move qdev_prop_vhost_scsi + DEFINE_PROP_VHOST_SCSI defs into vhost-scsi.[c,h]
   (reported by MST)
 - Add enum vhost_scsi_vq_list for VHostSCSI->vqs[] enumeration (reported by
MST)
 - Add missing braces around single like if statement to following QEMU
   style (reported by Blue Swirl)
 - Change vhost_scsi_target->vhost_wwpn to char *, in order to drop casts to
   pstrcpy in vhost_scsi_start() + vhost_scsi_stop() (reported by Blue Swirl)
 - Change VHOST_SCSI_GET_ABI_VERSION to 'int' type (MST)
 - Add vhost-scsi.h include for DEFINE_PROP_VHOST_SCSI (mst + nab)
 - Move vhost-scsi related struct members ahead of *cmd_vqs[0] within
   VirtIOSCSI definition.  (paolo + nab)
 - Fix 4 byte alignment of vhost_scsi_target (MST)
 - Convert fprintf(stderr, ...) usage to -> error_report() (reported by MST)
 - Do explict memset of backend before calling VHOST_SCSI_CLEAR_ENDPOINT
   in vhost_scsi_stop() (reported by MST)
 - Add support for vhostfd passing in vhost_scsi_add() (reported by MST)
 - Move net_handle_fd_param() -> monitor_handle_fd_param() for generic
   usage by net/ + vhost-scsi (reported by MST)
 - Change vhost_scsi_add() to use monitor_handle_fd_param() (reported by MST)

Changes from v1 -> v2:

 - Expose ABI version via VHOST_SCSI_GET_ABI_VERSION + use Rev 0 as
   starting point for v3.6-rc code (Stefan + ALiguori + nab)
 - Fix upstream qemu conflict in hw/qdev-properties.c
 - Make GET_ABI_VERSION use int (nab + mst)
 - Drop unnecessary event-notifier changes (nab)
 - Fix vhost-scsi case lables in configure (reported by paolo)
 - Convert qdev_prop_vhost_scsi to use ->get() + ->set() following
   qdev_prop_netdev (reported by paolo)
 - Fix typo in qemu-options.hx definition of vhost-scsi (reported by paolo)
 - Squash virtio-scsi: use the vhost-scsi host device from stefan (nab)
 - Fix up virtio_scsi_properties[] conflict w/ upstream qemu (nab)
 - Drop usage of to_virtio_scsi() in virtio_scsi_set_status()
      (reported by paolo)
 - Use modern VirtIOSCSIConf define in virtio-scsi.h (reported by paolo)
 - Use s->conf->vhost_scsi instead of proxyconf->vhost_scsi in
   virtio_scsi_init() (reported by paolo)
 - Only register QEMU SCSI bus is vhost-scsi is not active (reported by paolo)
 - Fix incorrect VirtIOSCSI->cmd_vqs[0] definition (nab)

Thanks again to everyone who has been reviewing this series!

--nab

Nicholas Bellinger (2):
  monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param
  virtio-scsi: Set max_target=0 during vhost-scsi operation

Stefan Hajnoczi (3):
  vhost: Pass device path to vhost_dev_init()
  vhost-scsi: add -vhost-scsi host device for use with tcm-vhost
  virtio-scsi: Add start/stop functionality for vhost-scsi

 configure            |   10 +++
 hw/Makefile.objs     |    1 +
 hw/qdev-properties.c |   41 +++++++++++
 hw/vhost-scsi.c      |  190 ++++++++++++++++++++++++++++++++++++++++++++++++++
 hw/vhost-scsi.h      |   62 ++++++++++++++++
 hw/vhost.c           |    5 +-
 hw/vhost.h           |    3 +-
 hw/vhost_net.c       |    2 +-
 hw/virtio-pci.c      |    2 +
 hw/virtio-scsi.c     |   55 ++++++++++++++-
 hw/virtio-scsi.h     |    1 +
 monitor.c            |   18 +++++
 monitor.h            |    1 +
 net.c                |   18 -----
 net.h                |    2 -
 net/socket.c         |    2 +-
 net/tap.c            |    4 +-
 qemu-common.h        |    1 +
 qemu-config.c        |   19 +++++
 qemu-options.hx      |    4 +
 vl.c                 |   18 +++++
 21 files changed, 431 insertions(+), 28 deletions(-)
 create mode 100644 hw/vhost-scsi.c
 create mode 100644 hw/vhost-scsi.h

-- 
1.7.2.5

Nicholas A. Bellinger

2012-Aug-21 20:52 UTC

head link

[RFC-v3 1/5] monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param

From: Nicholas Bellinger <nab at linux-iscsi.org>

This patch renames+moves the net_handle_fd_param() caller used to
obtain a file descriptor from either qemu_parse_fd() (the normal case)
or from monitor_get_fd() (migration case) into a generically prefixed
monitor_handle_fd_param() to be used by vhost-scsi code.

Also update net/[socket,tap].c consumers to use the new prefix.

Reported-by: Michael S. Tsirkin <mst at redhat.com>
Cc: Michael S. Tsirkin <mst at redhat.com>
Cc: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com>
Cc: Paolo Bonzini <pbonzini at redhat.com>
Cc: Anthony Liguori <aliguori at us.ibm.com>
Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org>
---
 monitor.c    |   18 ++++++++++++++++++
 monitor.h    |    1 +
 net.c        |   18 ------------------
 net.h        |    2 --
 net/socket.c |    2 +-
 net/tap.c    |    4 ++--
 6 files changed, 22 insertions(+), 23 deletions(-)

diff --git a/monitor.c b/monitor.c
index 49dccfe..0641efe 100644
--- a/monitor.c
+++ b/monitor.c
@@ -2389,6 +2389,24 @@ int monitor_get_fd(Monitor *mon, const char *fdname)
     return -1;
 }
 
+int monitor_handle_fd_param(Monitor *mon, const char *fdname)
+{
+    int fd;
+
+    if (!qemu_isdigit(fdname[0]) && mon) {
+
+        fd = monitor_get_fd(mon, fdname);
+        if (fd == -1) {
+            error_report("No file descriptor named %s found",
fdname);
+            return -1;
+        }
+    } else {
+        fd = qemu_parse_fd(fdname);
+    }
+
+    return fd;
+}
+
 /* mon_cmds and info_cmds would be sorted at runtime */
 static mon_cmd_t mon_cmds[] = {
 #include "hmp-commands.h"
diff --git a/monitor.h b/monitor.h
index 5f4de1b..d557e97 100644
--- a/monitor.h
+++ b/monitor.h
@@ -65,6 +65,7 @@ int monitor_read_block_device_key(Monitor *mon, const char
*device,
                                   void *opaque);
 
 int monitor_get_fd(Monitor *mon, const char *fdname);
+int monitor_handle_fd_param(Monitor *mon, const char *fdname);
 
 void monitor_vprintf(Monitor *mon, const char *fmt, va_list ap)
     GCC_FMT_ATTR(2, 0);
diff --git a/net.c b/net.c
index 60043dd..e5d25d4 100644
--- a/net.c
+++ b/net.c
@@ -522,24 +522,6 @@ int qemu_find_nic_model(NICInfo *nd, const char * const
*models,
     return -1;
 }
 
-int net_handle_fd_param(Monitor *mon, const char *param)
-{
-    int fd;
-
-    if (!qemu_isdigit(param[0]) && mon) {
-
-        fd = monitor_get_fd(mon, param);
-        if (fd == -1) {
-            error_report("No file descriptor named %s found", param);
-            return -1;
-        }
-    } else {
-        fd = qemu_parse_fd(param);
-    }
-
-    return fd;
-}
-
 static int net_init_nic(const NetClientOptions *opts, const char *name,
                         NetClientState *peer)
 {
diff --git a/net.h b/net.h
index 2975056..04fda1d 100644
--- a/net.h
+++ b/net.h
@@ -168,8 +168,6 @@ int qmp_netdev_add(Monitor *mon, const QDict *qdict, QObject
**ret);
 
 void qdev_set_nic_properties(DeviceState *dev, NICInfo *nd);
 
-int net_handle_fd_param(Monitor *mon, const char *param);
-
 #define POLYNOMIAL 0x04c11db6
 unsigned compute_mcast_idx(const uint8_t *ep);
 
diff --git a/net/socket.c b/net/socket.c
index c172c24..7c602e4 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -629,7 +629,7 @@ int net_init_socket(const NetClientOptions *opts, const char
*name,
     if (sock->has_fd) {
         int fd;
 
-        fd = net_handle_fd_param(cur_mon, sock->fd);
+        fd = monitor_handle_fd_param(cur_mon, sock->fd);
         if (fd == -1 || !net_socket_fd_init(peer, "socket", name, fd,
1)) {
             return -1;
         }
diff --git a/net/tap.c b/net/tap.c
index 1971525..a88ae8f 100644
--- a/net/tap.c
+++ b/net/tap.c
@@ -610,7 +610,7 @@ int net_init_tap(const NetClientOptions *opts, const char
*name,
             return -1;
         }
 
-        fd = net_handle_fd_param(cur_mon, tap->fd);
+        fd = monitor_handle_fd_param(cur_mon, tap->fd);
         if (fd == -1) {
             return -1;
         }
@@ -686,7 +686,7 @@ int net_init_tap(const NetClientOptions *opts, const char
*name,
         int vhostfd;
 
         if (tap->has_vhostfd) {
-            vhostfd = net_handle_fd_param(cur_mon, tap->vhostfd);
+            vhostfd = monitor_handle_fd_param(cur_mon, tap->vhostfd);
             if (vhostfd == -1) {
                 return -1;
             }
-- 
1.7.2.5

Nicholas A. Bellinger

2012-Aug-21 20:52 UTC

head link

[RFC-v3 2/5] vhost: Pass device path to vhost_dev_init()

From: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com>

The path to /dev/vhost-net is currently hardcoded in vhost_dev_init().
This needs to be changed so that /dev/vhost-scsi can be used.  Pass in
the device path instead of hardcoding it.

Signed-off-by: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com>
Cc: Paolo Bonzini <pbonzini at redhat.com>
Cc: Michael S. Tsirkin <mst at redhat.com>
Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org>
---
 hw/vhost.c     |    5 +++--
 hw/vhost.h     |    3 ++-
 hw/vhost_net.c |    2 +-
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/hw/vhost.c b/hw/vhost.c
index 0fd8da8..d0ce5aa 100644
--- a/hw/vhost.c
+++ b/hw/vhost.c
@@ -747,14 +747,15 @@ static void vhost_eventfd_del(MemoryListener *listener,
 {
 }
 
-int vhost_dev_init(struct vhost_dev *hdev, int devfd, bool force)
+int vhost_dev_init(struct vhost_dev *hdev, int devfd, const char *devpath,
+                   bool force)
 {
     uint64_t features;
     int r;
     if (devfd >= 0) {
         hdev->control = devfd;
     } else {
-        hdev->control = open("/dev/vhost-net", O_RDWR);
+        hdev->control = open(devpath, O_RDWR);
         if (hdev->control < 0) {
             return -errno;
         }
diff --git a/hw/vhost.h b/hw/vhost.h
index 80e64df..0c47229 100644
--- a/hw/vhost.h
+++ b/hw/vhost.h
@@ -44,7 +44,8 @@ struct vhost_dev {
     bool force;
 };
 
-int vhost_dev_init(struct vhost_dev *hdev, int devfd, bool force);
+int vhost_dev_init(struct vhost_dev *hdev, int devfd, const char *devpath,
+                   bool force);
 void vhost_dev_cleanup(struct vhost_dev *hdev);
 bool vhost_dev_query(struct vhost_dev *hdev, VirtIODevice *vdev);
 int vhost_dev_start(struct vhost_dev *hdev, VirtIODevice *vdev);
diff --git a/hw/vhost_net.c b/hw/vhost_net.c
index ecaa22d..df2c4a3 100644
--- a/hw/vhost_net.c
+++ b/hw/vhost_net.c
@@ -109,7 +109,7 @@ struct vhost_net *vhost_net_init(NetClientState *backend,
int devfd,
         (1 << VHOST_NET_F_VIRTIO_NET_HDR);
     net->backend = r;
 
-    r = vhost_dev_init(&net->dev, devfd, force);
+    r = vhost_dev_init(&net->dev, devfd, "/dev/vhost-net",
force);
     if (r < 0) {
         goto fail;
     }
-- 
1.7.2.5

Nicholas A. Bellinger

2012-Aug-21 20:52 UTC

head link

[RFC-v3 3/5] vhost-scsi: add -vhost-scsi host device for use with tcm-vhost

From: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com>

This patch adds a new type of host device that drives the vhost_scsi
device.  The syntax to add vhost-scsi is:

  qemu -vhost-scsi id=vhost-scsi0,wwpn=...,tpgt=123

The virtio-scsi emulated device will make use of vhost-scsi to process
virtio-scsi requests inside the kernel and hand them to the in-kernel
SCSI target stack using the tcm_vhost fabric driver.

The tcm_vhost driver was merged into the upstream linux kernel for 3.6-rc2,
and the commit can be found here:

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=057cbf49a1f08297

Changelog v2 -> v3:

- Move qdev_prop_vhost_scsi + DEFINE_PROP_VHOST_SCSI defs into vhost-scsi.[c,h]
  (reported by MST)
- Add enum vhost_scsi_vq_list for VHostSCSI->vqs[] enumeration (reported by
MST)
- Add missing braces around single like if statement to following QEMU
  style (reported by Blue Swirl)
- Change vhost_scsi_target->vhost_wwpn to char *, in order to drop casts to
  pstrcpy in vhost_scsi_start() + vhost_scsi_stop() (reported by Blue Swirl)
- Change VHOST_SCSI_GET_ABI_VERSION to 'int' type (MST)
- Fix 4 byte alignment of vhost_scsi_target (MST)
- Convert fprintf(stderr, ...) usage to -> error_report() (reported by MST)
- Do explict memset of backend before calling VHOST_SCSI_CLEAR_ENDPOINT
  in vhost_scsi_stop() (reported by MST)
- Add support for vhostfd passing in vhost_scsi_add() (reported by MST)
- Change vhost_scsi_add() to use monitor_handle_fd_param() (reported by MST)

Changelog v1 -> v2:

- Expose ABI version via VHOST_SCSI_GET_ABI_VERSION + use Rev 0 as
  starting point for v3.6-rc code (Stefan + ALiguori + nab)
- Fix upstream qemu conflict in hw/qdev-properties.c
- Make GET_ABI_VERSION use int (nab + mst)
- Fix vhost-scsi case lables in configure (reported by paolo)
- Convert qdev_prop_vhost_scsi to use ->get() + ->set() following
  qdev_prop_netdev (reported by paolo)
- Fix typo in qemu-options.hx definition of vhost-scsi (reported by paolo)

Changelog v0 -> v1:

- Add VHOST_SCSI_SET_ENDPOINT call (stefan)
- Enable vhost notifiers for multiple queues (Zhi)
- clear vhost-scsi endpoint on stopped (Zhi)
- Add CONFIG_VHOST_SCSI for QEMU build configure (nab)
- Rename vhost_vring_target -> vhost_scsi_target (mst + nab)
- Add support for VHOST_SCSI_GET_ABI_VERSION ioctl (aliguori + nab)

Cc: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com>
Cc: Zhi Yong Wu <wuzhy at linux.vnet.ibm.com>
Cc: Anthony Liguori <aliguori at us.ibm.com>
Cc: Paolo Bonzini <pbonzini at redhat.com>
Cc: Michael S. Tsirkin <mst at redhat.com>
Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org>
---
 configure            |   10 +++
 hw/Makefile.objs     |    1 +
 hw/qdev-properties.c |   41 +++++++++++
 hw/vhost-scsi.c      |  190 ++++++++++++++++++++++++++++++++++++++++++++++++++
 hw/vhost-scsi.h      |   62 ++++++++++++++++
 qemu-common.h        |    1 +
 qemu-config.c        |   19 +++++
 qemu-options.hx      |    4 +
 vl.c                 |   18 +++++
 9 files changed, 346 insertions(+), 0 deletions(-)
 create mode 100644 hw/vhost-scsi.c
 create mode 100644 hw/vhost-scsi.h

diff --git a/configure b/configure
index f0dbc03..1f03202 100755
--- a/configure
+++ b/configure
@@ -168,6 +168,7 @@ libattr=""
 xfs=""
 
 vhost_net="no"
+vhost_scsi="no"
 kvm="no"
 gprof="no"
 debug_tcg="no"
@@ -513,6 +514,7 @@ Haiku)
   usb="linux"
   kvm="yes"
   vhost_net="yes"
+  vhost_scsi="yes"
   if [ "$cpu" = "i386" -o "$cpu" =
"x86_64" ] ; then
     audio_possible_drivers="$audio_possible_drivers fmod"
   fi
@@ -818,6 +820,10 @@ for opt do
   ;;
   --enable-vhost-net) vhost_net="yes"
   ;;
+  --disable-vhost-scsi) vhost_scsi="no"
+  ;;
+  --enable-vhost-scsi) vhost_scsi="yes"
+  ;;
   --disable-opengl) opengl="no"
   ;;
   --enable-opengl) opengl="yes"
@@ -3116,6 +3122,7 @@ echo "posix_madvise     $posix_madvise"
 echo "uuid support      $uuid"
 echo "libcap-ng support $cap_ng"
 echo "vhost-net support $vhost_net"
+echo "vhost-scsi support $vhost_scsi"
 echo "Trace backend     $trace_backend"
 echo "Trace output file $trace_file-<pid>"
 echo "spice support     $spice"
@@ -3828,6 +3835,9 @@ case "$target_arch2" in
       if test "$vhost_net" = "yes" ; then
         echo "CONFIG_VHOST_NET=y" >> $config_target_mak
       fi
+      if test "$vhost_scsi" = "yes" ; then
+        echo "CONFIG_VHOST_SCSI=y" >> $config_target_mak
+      fi
     fi
 esac
 case "$target_arch2" in
diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 3ba5dd0..6ab75ec 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -169,6 +169,7 @@ obj-$(CONFIG_VIRTIO) += virtio.o virtio-blk.o
virtio-balloon.o virtio-net.o
 obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o virtio-scsi.o
 obj-$(CONFIG_SOFTMMU) += vhost_net.o
 obj-$(CONFIG_VHOST_NET) += vhost.o
+obj-$(CONFIG_VHOST_SCSI) += vhost-scsi.o
 obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/
 obj-$(CONFIG_NO_PCI) += pci-stub.o
 obj-$(CONFIG_VGA) += vga.o
diff --git a/hw/qdev-properties.c b/hw/qdev-properties.c
index 8aca0d4..8b505ca 100644
--- a/hw/qdev-properties.c
+++ b/hw/qdev-properties.c
@@ -4,6 +4,7 @@
 #include "blockdev.h"
 #include "hw/block-common.h"
 #include "net/hub.h"
+#include "vhost-scsi.h"
 
 void *qdev_get_prop_ptr(DeviceState *dev, Property *prop)
 {
@@ -696,6 +697,46 @@ PropertyInfo qdev_prop_vlan = {
     .set   = set_vlan,
 };
 
+/* --- vhost-scsi --- */
+
+static int parse_vhost_scsi_dev(DeviceState *dev, const char *str, void **ptr)
+{
+   VHostSCSI *p;
+
+   p = find_vhost_scsi(str);
+   if (p == NULL) {
+       return -ENOENT;
+   }
+
+   *ptr = p;
+   return 0;
+}
+
+static const char *print_vhost_scsi_dev(void *ptr)
+{
+    VHostSCSI *p = ptr;
+
+    return (p) ? vhost_scsi_get_id(p) : "<null>";
+}
+
+static void get_vhost_scsi_dev(Object *obj, Visitor *v, void *opaque,
+                       const char *name, Error **errp)
+{
+    get_pointer(obj, v, opaque, print_vhost_scsi_dev, name, errp);
+}
+
+static void set_vhost_scsi_dev(Object *obj, Visitor *v, void *opaque,
+                               const char *name, Error **errp)
+{
+    set_pointer(obj, v, opaque, parse_vhost_scsi_dev, name, errp);
+}
+
+PropertyInfo qdev_prop_vhost_scsi = {
+     .name = "vhost-scsi",
+     .get  = get_vhost_scsi_dev,
+     .set  = set_vhost_scsi_dev,
+};
+
 /* --- pointer --- */
 
 /* Not a proper property, just for dirty hacks.  TODO Remove it!  */
diff --git a/hw/vhost-scsi.c b/hw/vhost-scsi.c
new file mode 100644
index 0000000..96da2fc
--- /dev/null
+++ b/hw/vhost-scsi.c
@@ -0,0 +1,190 @@
+/*
+ * vhost_scsi host device
+ *
+ * Copyright IBM, Corp. 2011
+ *
+ * Authors:
+ *  Stefan Hajnoczi   <stefanha at linux.vnet.ibm.com>
+ *
+ * Changes for QEMU mainline + tcm_vhost kernel upstream:
+ *  Nicholas Bellinger <nab at risingtidesystems.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#include <sys/ioctl.h>
+#include "config.h"
+#include "qemu-queue.h"
+#include "monitor.h"
+#include "vhost-scsi.h"
+#include "vhost.h"
+
+struct VHostSCSI {
+    const char *id;
+    const char *wwpn;
+    uint16_t tpgt;
+    int vhostfd;
+    struct vhost_dev dev;
+    struct vhost_virtqueue vqs[VHOST_SCSI_VQ_NUM];
+    QLIST_ENTRY(VHostSCSI) list;
+};
+
+static QLIST_HEAD(, VHostSCSI) vhost_scsi_list +   
QLIST_HEAD_INITIALIZER(vhost_scsi_list);
+
+VHostSCSI *find_vhost_scsi(const char *id)
+{
+    VHostSCSI *vs;
+
+    QLIST_FOREACH(vs, &vhost_scsi_list, list) {
+        if (!strcmp(id, vs->id)) {
+            return vs;
+        }
+    }
+    return NULL;
+}
+
+const char *vhost_scsi_get_id(VHostSCSI *vs)
+{
+    return vs->id;
+}
+
+int vhost_scsi_start(VHostSCSI *vs, VirtIODevice *vdev)
+{
+    int ret, abi_version;
+    struct vhost_scsi_target backend;
+
+    if (!vhost_dev_query(&vs->dev, vdev)) {
+        return -ENOTSUP;
+    }
+
+    vs->dev.nvqs = VHOST_SCSI_VQ_NUM;
+    vs->dev.vqs = vs->vqs;
+
+    ret = vhost_dev_enable_notifiers(&vs->dev, vdev);
+    if (ret < 0) {
+        return ret;
+    }
+
+    ret = vhost_dev_start(&vs->dev, vdev);
+    if (ret < 0) {
+        return ret;
+    }
+
+    ret = ioctl(vs->dev.control, VHOST_SCSI_GET_ABI_VERSION,
&abi_version);
+    if (ret < 0) {
+        ret = -errno;
+        vhost_dev_stop(&vs->dev, vdev);
+        return ret;
+    }
+    if (abi_version > VHOST_SCSI_ABI_VERSION) {
+        error_report("vhost-scsi: The running tcm_vhost kernel
abi_version:"
+		" %d is greater than vhost_scsi userspace supports: %d, please"
+		" upgrade your version of QEMU\n", abi_version,
+		VHOST_SCSI_ABI_VERSION);
+        ret = -ENOSYS;
+        vhost_dev_stop(&vs->dev, vdev);
+        return ret;
+    }
+    fprintf(stdout, "TCM_vHost ABI version: %d\n", abi_version);
+
+    memset(&backend, 0, sizeof(backend));
+    pstrcpy(backend.vhost_wwpn, sizeof(backend.vhost_wwpn), vs->wwpn);
+    backend.vhost_tpgt = vs->tpgt;
+    ret = ioctl(vs->dev.control, VHOST_SCSI_SET_ENDPOINT, &backend);
+    if (ret < 0) {
+        ret = -errno;
+        vhost_dev_stop(&vs->dev, vdev);
+        return ret;
+    }
+
+    return 0;
+}
+
+void vhost_scsi_stop(VHostSCSI *vs, VirtIODevice *vdev)
+{
+    int ret;
+    struct vhost_scsi_target backend;
+
+    memset(&backend, 0, sizeof(backend));
+    pstrcpy(backend.vhost_wwpn, sizeof(backend.vhost_wwpn), vs->wwpn);
+    backend.vhost_tpgt = vs->tpgt;
+    ret = ioctl(vs->dev.control, VHOST_SCSI_CLEAR_ENDPOINT, &backend);
+    if (ret < 0) {
+        error_report("vhost-scsi: Failed to clear endpoint\n");
+    }
+
+    vhost_dev_stop(&vs->dev, vdev);
+}
+
+static VHostSCSI *vhost_scsi_add(const char *id, const char *wwpn,
+                                 uint16_t tpgt, const char *vhostfd_str)
+{
+    VHostSCSI *vs;
+    int ret;
+
+    vs = g_malloc0(sizeof(*vs));
+    if (!vs) {
+        error_report("vhost-scsi: unable to allocate *vs\n");
+        return NULL;
+    }
+    vs->vhostfd = -1;
+
+    if (vhostfd_str) {
+        vs->vhostfd = monitor_handle_fd_param(cur_mon, vhostfd_str);
+        if (vs->vhostfd == -1) {
+            error_report("vhost-scsi: unable to parse
vs->vhostfd\n");
+            return NULL;
+        }
+    }
+    /* TODO set up vhost-scsi device and bind to tcm_vhost/$wwpm/tpgt_$tpgt */
+    ret = vhost_dev_init(&vs->dev, vs->vhostfd,
"/dev/vhost-scsi", false);
+    if (ret < 0) {
+        error_report("vhost-scsi: vhost initialization failed: %s\n",
+                strerror(-ret));
+        return NULL;
+    }
+    vs->dev.backend_features = 0;
+    vs->dev.acked_features = 0;
+
+    vs->id = g_strdup(id);
+    vs->wwpn = g_strdup(wwpn);
+    vs->tpgt = tpgt;
+    QLIST_INSERT_HEAD(&vhost_scsi_list, vs, list);
+
+    return vs;
+}
+
+VHostSCSI *vhost_scsi_add_opts(QemuOpts *opts)
+{
+    const char *id;
+    const char *wwpn, *vhostfd;
+    uint64_t tpgt;
+
+    id = qemu_opts_id(opts);
+    if (!id) {
+        error_report("vhost-scsi: no id specified\n");
+        return NULL;
+    }
+    if (find_vhost_scsi(id)) {
+        error_report("duplicate vhost-scsi: \"%s\"\n", id);
+        return NULL;
+    }
+
+    wwpn = qemu_opt_get(opts, "wwpn");
+    if (!wwpn) {
+        error_report("vhost-scsi: \"%s\" missing wwpn\n",
id);
+        return NULL;
+    }
+
+    tpgt = qemu_opt_get_number(opts, "tpgt", UINT64_MAX);
+    if (tpgt > UINT16_MAX) {
+        error_report("vhost-scsi: \"%s\" needs a 16-bit
tpgt\n", id);
+        return NULL;
+    }
+    vhostfd = qemu_opt_get(opts, "vhostfd");
+
+    return vhost_scsi_add(id, wwpn, tpgt, vhostfd);
+}
diff --git a/hw/vhost-scsi.h b/hw/vhost-scsi.h
new file mode 100644
index 0000000..68de51a
--- /dev/null
+++ b/hw/vhost-scsi.h
@@ -0,0 +1,62 @@
+/*
+ * vhost_scsi host device
+ *
+ * Copyright IBM, Corp. 2011
+ *
+ * Authors:
+ *  Stefan Hajnoczi   <stefanha at linux.vnet.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#ifndef VHOST_SCSI_H
+#define VHOST_SCSI_H
+
+#include "qemu-common.h"
+#include "qemu-option.h"
+#include "qdev.h"
+
+/*
+ * Used by QEMU userspace to ensure a consistent vhost-scsi ABI.
+ *
+ * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate +
+ *            RFC-v2 vhost-scsi userspace.  Add GET_ABI_VERSION ioctl usage
+ */
+
+#define VHOST_SCSI_ABI_VERSION	0
+
+/* TODO #include <linux/vhost.h> properly */
+/* For VHOST_SCSI_SET_ENDPOINT/VHOST_SCSI_CLEAR_ENDPOINT ioctl */
+struct vhost_scsi_target {
+    int abi_version;
+    char vhost_wwpn[224];
+    unsigned short vhost_tpgt;
+    unsigned short reserved;
+};
+
+enum vhost_scsi_vq_list {
+    VHOST_SCSI_VQ_CTL = 0,
+    VHOST_SCSI_VQ_EVT = 1,
+    VHOST_SCSI_VQ_IO = 2,
+    VHOST_SCSI_VQ_NUM = 3,
+};
+
+#define VHOST_VIRTIO 0xAF
+#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct
vhost_scsi_target)
+#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct
vhost_scsi_target)
+#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int)
+
+extern PropertyInfo qdev_prop_vhost_scsi;
+
+#define DEFINE_PROP_VHOST_SCSI(_n, _s, _f) \
+    DEFINE_PROP(_n, _s, _f, qdev_prop_vhost_scsi, VHostSCSI*)
+
+VHostSCSI *find_vhost_scsi(const char *id);
+const char *vhost_scsi_get_id(VHostSCSI *vs);
+VHostSCSI *vhost_scsi_add_opts(QemuOpts *opts);
+int vhost_scsi_start(VHostSCSI *vs, VirtIODevice *vdev);
+void vhost_scsi_stop(VHostSCSI *vs, VirtIODevice *vdev);
+
+#endif
diff --git a/qemu-common.h b/qemu-common.h
index f9deca6..ec36002 100644
--- a/qemu-common.h
+++ b/qemu-common.h
@@ -280,6 +280,7 @@ typedef struct EventNotifier EventNotifier;
 typedef struct VirtIODevice VirtIODevice;
 typedef struct QEMUSGList QEMUSGList;
 typedef struct SHPCDevice SHPCDevice;
+typedef struct VHostSCSI VHostSCSI;
 
 typedef uint64_t pcibus_t;
 
diff --git a/qemu-config.c b/qemu-config.c
index 5c3296b..2d4884c 100644
--- a/qemu-config.c
+++ b/qemu-config.c
@@ -626,6 +626,24 @@ QemuOptsList qemu_boot_opts = {
     },
 };
 
+QemuOptsList qemu_vhost_scsi_opts = {
+    .name = "vhost-scsi",
+    .head = QTAILQ_HEAD_INITIALIZER(qemu_vhost_scsi_opts.head),
+    .desc = {
+        {
+            .name = "wwpn",
+            .type = QEMU_OPT_STRING,
+        }, {
+            .name = "tpgt",
+            .type = QEMU_OPT_NUMBER,
+        }, {
+            .name = "vhostfd",
+            .type = QEMU_OPT_STRING,
+        },
+        { /* end of list */ }
+    },
+};
+
 static QemuOptsList *vm_config_groups[32] = {
     &qemu_drive_opts,
     &qemu_chardev_opts,
@@ -641,6 +659,7 @@ static QemuOptsList *vm_config_groups[32] = {
     &qemu_machine_opts,
     &qemu_boot_opts,
     &qemu_iscsi_opts,
+    &qemu_vhost_scsi_opts,
     NULL,
 };
 
diff --git a/qemu-options.hx b/qemu-options.hx
index 47cb5bd..4e7a03c 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -565,6 +565,10 @@ possible drivers and properties, use @code{-device ?} and
 ETEXI
 
 DEFHEADING()
+DEF("vhost-scsi", HAS_ARG, QEMU_OPTION_vhost_scsi,
+    "-vhost-scsi wwpn=string0,tpgt=number0\n"
+    "                add vhost-scsi device\n",
+    QEMU_ARCH_ALL)
 
 DEFHEADING(File system options:)
 
diff --git a/vl.c b/vl.c
index 91076f0..61c8284 100644
--- a/vl.c
+++ b/vl.c
@@ -144,6 +144,7 @@ int main(int argc, char **argv)
 #include "qemu-options.h"
 #include "qmp-commands.h"
 #include "main-loop.h"
+#include "hw/vhost-scsi.h"
 #ifdef CONFIG_VIRTFS
 #include "fsdev/qemu-fsdev.h"
 #endif
@@ -1858,6 +1859,14 @@ static int fsdev_init_func(QemuOpts *opts, void *opaque)
 }
 #endif
 
+static int vhost_scsi_init_func(QemuOpts *opts, void *opaque)
+{
+    if (!vhost_scsi_add_opts(opts)) {
+        return -1;
+    }
+    return 0;
+}
+
 static int mon_init_func(QemuOpts *opts, void *opaque)
 {
     CharDriverState *chr;
@@ -2617,6 +2626,11 @@ int main(int argc, char **argv, char **envp)
                 }
                 break;
 #endif
+            case QEMU_OPTION_vhost_scsi:
+                if (!qemu_opts_parse(qemu_find_opts("vhost-scsi"),
optarg, 0)) {
+                    exit(1);
+                }
+                break;
 #ifdef CONFIG_SLIRP
             case QEMU_OPTION_tftp:
                 legacy_tftp_prefix = optarg;
@@ -3337,6 +3351,10 @@ int main(int argc, char **argv, char **envp)
         exit(1);
     }
 #endif
+    if (qemu_opts_foreach(qemu_find_opts("vhost-scsi"),
+                          vhost_scsi_init_func, NULL, 1)) {
+        exit(1);
+    }
 
     os_daemonize();
 
-- 
1.7.2.5

Nicholas A. Bellinger

2012-Aug-21 20:52 UTC

head link

[RFC-v3 4/5] virtio-scsi: Add start/stop functionality for vhost-scsi

From: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com>

This patch starts and stops vhost as the virtio device transitions
through its status phases.  Vhost can only be started once the guest
reports its driver has successfully initialized, which means the
virtqueues have been set up by the guest.

v3: - Add vhost-scsi.h include for DEFINE_PROP_VHOST_SCSI (mst + nab)
    - Move vhost-scsi related struct members ahead of *cmd_vqs[0] within
      VirtIOSCSI definition.  (paolo + nab)

v2: - Squash virtio-scsi: use the vhost-scsi host device from stefan (nab)
    - Fix up virtio_scsi_properties[] conflict w/ upstream qemu (nab)
    - Drop usage of to_virtio_scsi() in virtio_scsi_set_status()
      (reported by paolo)
    - Use modern VirtIOSCSIConf define in virtio-scsi.h (reported by paolo)
    - Use s->conf->vhost_scsi instead of proxyconf->vhost_scsi in
      virtio_scsi_init() (reported by paolo)
    - Only register QEMU SCSI bus is vhost-scsi is not active (reported
      by paolo)

Cc: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com>
Cc: Zhi Yong Wu <wuzhy at linux.vnet.ibm.com>
Cc: Michael S. Tsirkin <mst at redhat.com>
Cc: Paolo Bonzini <pbonzini at redhat.com>
Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org>
---
 hw/virtio-pci.c  |    2 ++
 hw/virtio-scsi.c |   49 +++++++++++++++++++++++++++++++++++++++++++++++++
 hw/virtio-scsi.h |    1 +
 3 files changed, 52 insertions(+), 0 deletions(-)

diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index 125eded..8ec7cf1 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -22,6 +22,7 @@
 #include "virtio-net.h"
 #include "virtio-serial.h"
 #include "virtio-scsi.h"
+#include "vhost-scsi.h"
 #include "pci.h"
 #include "qemu-error.h"
 #include "msi.h"
@@ -1036,6 +1037,7 @@ static void virtio_scsi_exit_pci(PCIDevice *pci_dev)
 }
 
 static Property virtio_scsi_properties[] = {
+    DEFINE_PROP_VHOST_SCSI("vhost-scsi", VirtIOPCIProxy,
scsi.vhost_scsi),
     DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags,
VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true),
     DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors,
DEV_NVECTORS_UNSPECIFIED),
     DEFINE_VIRTIO_SCSI_PROPERTIES(VirtIOPCIProxy, host_features, scsi),
diff --git a/hw/virtio-scsi.c b/hw/virtio-scsi.c
index 5f737ac..edda097 100644
--- a/hw/virtio-scsi.c
+++ b/hw/virtio-scsi.c
@@ -13,9 +13,13 @@
  *
  */
 
+#include "qemu-common.h"
+#include "qemu-error.h"
+#include "vhost-scsi.h"
 #include "virtio-scsi.h"
 #include <hw/scsi.h>
 #include <hw/scsi-defs.h>
+#include "vhost.h"
 
 #define VIRTIO_SCSI_VQ_SIZE     128
 #define VIRTIO_SCSI_CDB_SIZE    32
@@ -144,6 +148,10 @@ typedef struct {
     uint32_t cdb_size;
     int resetting;
     bool events_dropped;
+
+    bool vhost_started;
+    VHostSCSI *vhost_scsi;
+
     VirtQueue *ctrl_vq;
     VirtQueue *event_vq;
     VirtQueue *cmd_vqs[0];
@@ -699,6 +707,38 @@ static struct SCSIBusInfo virtio_scsi_scsi_info = {
     .load_request = virtio_scsi_load_request,
 };
 
+static bool virtio_scsi_started(VirtIOSCSI *s, uint8_t val)
+{
+    return (val & VIRTIO_CONFIG_S_DRIVER_OK) &&
s->vdev.vm_running;
+}
+
+static void virtio_scsi_set_status(VirtIODevice *vdev, uint8_t val)
+{
+    VirtIOSCSI *s = (VirtIOSCSI *)vdev;
+    bool start = virtio_scsi_started(s, val);
+
+    if (s->vhost_started == start) {
+        return;
+    }
+
+    if (start) {
+        int ret;
+
+        ret = vhost_scsi_start(s->vhost_scsi, vdev);
+        if (ret < 0) {
+            error_report("virtio-scsi: unable to start vhost: %s\n",
+                         strerror(-ret));
+
+            /* There is no userspace virtio-scsi fallback so exit */
+            exit(1);
+        }
+    } else {
+        vhost_scsi_stop(s->vhost_scsi, vdev);
+    }
+
+    s->vhost_started = start;
+}
+
 VirtIODevice *virtio_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf)
 {
     VirtIOSCSI *s;
@@ -712,12 +752,17 @@ VirtIODevice *virtio_scsi_init(DeviceState *dev,
VirtIOSCSIConf *proxyconf)
 
     s->qdev = dev;
     s->conf = proxyconf;
+    s->vhost_started = false;
+    s->vhost_scsi = s->conf->vhost_scsi;
 
     /* TODO set up vdev function pointers */
     s->vdev.get_config = virtio_scsi_get_config;
     s->vdev.set_config = virtio_scsi_set_config;
     s->vdev.get_features = virtio_scsi_get_features;
     s->vdev.reset = virtio_scsi_reset;
+    if (s->vhost_scsi) {
+        s->vdev.set_status = virtio_scsi_set_status;
+    }
 
     s->ctrl_vq = virtio_add_queue(&s->vdev, VIRTIO_SCSI_VQ_SIZE,
                                    virtio_scsi_handle_ctrl);
@@ -743,5 +788,9 @@ void virtio_scsi_exit(VirtIODevice *vdev)
 {
     VirtIOSCSI *s = (VirtIOSCSI *)vdev;
     unregister_savevm(s->qdev, "virtio-scsi", s);
+
+    /* This will stop vhost backend if appropriate. */
+    virtio_scsi_set_status(vdev, 0);
+
     virtio_cleanup(vdev);
 }
diff --git a/hw/virtio-scsi.h b/hw/virtio-scsi.h
index 4bc889d..74e9422 100644
--- a/hw/virtio-scsi.h
+++ b/hw/virtio-scsi.h
@@ -22,6 +22,7 @@
 #define VIRTIO_ID_SCSI  8
 
 struct VirtIOSCSIConf {
+    VHostSCSI *vhost_scsi;
     uint32_t num_queues;
     uint32_t max_sectors;
     uint32_t cmd_per_lun;
-- 
1.7.2.5

Nicholas A. Bellinger

2012-Aug-21 20:52 UTC

head link

[RFC-v3 5/5] virtio-scsi: Set max_target=0 during vhost-scsi operation

From: Nicholas Bellinger <nab at linux-iscsi.org>

This QEMU patch sets VirtIOSCSIConfig->max_target=0 for vhost-scsi operation
to restrict virtio-scsi LLD guest scanning to max_id=0 (a single target ID
instance) when connected to individual tcm_vhost endpoints.

This ensures that virtio-scsi LLD only attempts to scan target IDs up to
VIRTIO_SCSI_MAX_TARGET when connected via virtio-scsi-raw.

Cc: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com>
Cc: Zhi Yong Wu <wuzhy at linux.vnet.ibm.com>
Cc: Paolo Bonzini <pbonzini at redhat.com>
Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org>
---
 hw/virtio-scsi.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/hw/virtio-scsi.c b/hw/virtio-scsi.c
index edda097..ab5ca72 100644
--- a/hw/virtio-scsi.c
+++ b/hw/virtio-scsi.c
@@ -546,7 +546,11 @@ static void virtio_scsi_get_config(VirtIODevice *vdev,
     stl_raw(&scsiconf->sense_size, s->sense_size);
     stl_raw(&scsiconf->cdb_size, s->cdb_size);
     stl_raw(&scsiconf->max_channel, VIRTIO_SCSI_MAX_CHANNEL);
-    stl_raw(&scsiconf->max_target, VIRTIO_SCSI_MAX_TARGET);
+    if (s->vhost_scsi) {
+        stl_raw(&scsiconf->max_target, 0);
+    } else {
+        stl_raw(&scsiconf->max_target, VIRTIO_SCSI_MAX_TARGET);
+    }
     stl_raw(&scsiconf->max_lun, VIRTIO_SCSI_MAX_LUN);
 }
 
-- 
1.7.2.5

Michael S. Tsirkin

2012-Sep-07 06:13 UTC

head link

[RFC-v3 0/5] vhost-scsi: Add support for host virtualized target

On Tue, Aug 21, 2012 at 08:52:06PM +0000, Nicholas A. Bellinger
wrote:> From: Nicholas Bellinger <nab at linux-iscsi.org>
> 
> Hi folks,
> 
> This is the third RFC for vhost-scsi patches against mainline QEMU v1.1
> to support the upstream tcm_vhost host virtualized target driver now
> available in v3.6-rc kernel code.  This series is based upon last
week's
> commit 346fe0c4c0b, and is aiming for a future QEMU v1.3 merge.
> 
> The patch series is available directly from:
> 
>    git://git.kernel.org/pub/scm/virt/kvm/nab/qemu-kvm.git
vhost-scsi-merge-v3
> 
> This -v3 series contains further review changes based upon feedback from
> MST, Paolo, and Blue.  It also contains the changes to function against
> the changes in target-pending/master -> headed for v3.6-rc3 code.
ACK series. Paolo can you ack virtio-scsi changes please?
Nicholas, do you want me to take this through my tree?
> Changes from v3 -> v2:
> 
>  - Move qdev_prop_vhost_scsi + DEFINE_PROP_VHOST_SCSI defs into
vhost-scsi.[c,h]
>    (reported by MST)
>  - Add enum vhost_scsi_vq_list for VHostSCSI->vqs[] enumeration
(reported by MST)
>  - Add missing braces around single like if statement to following QEMU
>    style (reported by Blue Swirl)
>  - Change vhost_scsi_target->vhost_wwpn to char *, in order to drop
casts to
>    pstrcpy in vhost_scsi_start() + vhost_scsi_stop() (reported by Blue
Swirl)
>  - Change VHOST_SCSI_GET_ABI_VERSION to 'int' type (MST)
>  - Add vhost-scsi.h include for DEFINE_PROP_VHOST_SCSI (mst + nab)
>  - Move vhost-scsi related struct members ahead of *cmd_vqs[0] within
>    VirtIOSCSI definition.  (paolo + nab)
>  - Fix 4 byte alignment of vhost_scsi_target (MST)
>  - Convert fprintf(stderr, ...) usage to -> error_report() (reported by
MST)
>  - Do explict memset of backend before calling VHOST_SCSI_CLEAR_ENDPOINT
>    in vhost_scsi_stop() (reported by MST)
>  - Add support for vhostfd passing in vhost_scsi_add() (reported by MST)
>  - Move net_handle_fd_param() -> monitor_handle_fd_param() for generic
>    usage by net/ + vhost-scsi (reported by MST)
>  - Change vhost_scsi_add() to use monitor_handle_fd_param() (reported by
MST)
> 
> Changes from v1 -> v2:
> 
>  - Expose ABI version via VHOST_SCSI_GET_ABI_VERSION + use Rev 0 as
>    starting point for v3.6-rc code (Stefan + ALiguori + nab)
>  - Fix upstream qemu conflict in hw/qdev-properties.c
>  - Make GET_ABI_VERSION use int (nab + mst)
>  - Drop unnecessary event-notifier changes (nab)
>  - Fix vhost-scsi case lables in configure (reported by paolo)
>  - Convert qdev_prop_vhost_scsi to use ->get() + ->set() following
>    qdev_prop_netdev (reported by paolo)
>  - Fix typo in qemu-options.hx definition of vhost-scsi (reported by paolo)
>  - Squash virtio-scsi: use the vhost-scsi host device from stefan (nab)
>  - Fix up virtio_scsi_properties[] conflict w/ upstream qemu (nab)
>  - Drop usage of to_virtio_scsi() in virtio_scsi_set_status()
>       (reported by paolo)
>  - Use modern VirtIOSCSIConf define in virtio-scsi.h (reported by paolo)
>  - Use s->conf->vhost_scsi instead of proxyconf->vhost_scsi in
>    virtio_scsi_init() (reported by paolo)
>  - Only register QEMU SCSI bus is vhost-scsi is not active (reported by
paolo)
>  - Fix incorrect VirtIOSCSI->cmd_vqs[0] definition (nab)
> 
> Thanks again to everyone who has been reviewing this series!
> 
> --nab
> 
> Nicholas Bellinger (2):
>   monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param
>   virtio-scsi: Set max_target=0 during vhost-scsi operation
> 
> Stefan Hajnoczi (3):
>   vhost: Pass device path to vhost_dev_init()
>   vhost-scsi: add -vhost-scsi host device for use with tcm-vhost
>   virtio-scsi: Add start/stop functionality for vhost-scsi
> 
>  configure            |   10 +++
>  hw/Makefile.objs     |    1 +
>  hw/qdev-properties.c |   41 +++++++++++
>  hw/vhost-scsi.c      |  190
++++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/vhost-scsi.h      |   62 ++++++++++++++++
>  hw/vhost.c           |    5 +-
>  hw/vhost.h           |    3 +-
>  hw/vhost_net.c       |    2 +-
>  hw/virtio-pci.c      |    2 +
>  hw/virtio-scsi.c     |   55 ++++++++++++++-
>  hw/virtio-scsi.h     |    1 +
>  monitor.c            |   18 +++++
>  monitor.h            |    1 +
>  net.c                |   18 -----
>  net.h                |    2 -
>  net/socket.c         |    2 +-
>  net/tap.c            |    4 +-
>  qemu-common.h        |    1 +
>  qemu-config.c        |   19 +++++
>  qemu-options.hx      |    4 +
>  vl.c                 |   18 +++++
>  21 files changed, 431 insertions(+), 28 deletions(-)
>  create mode 100644 hw/vhost-scsi.c
>  create mode 100644 hw/vhost-scsi.h
> 
> -- 
> 1.7.2.5

Michael S. Tsirkin

2012-Sep-07 06:23 UTC

head link

[RFC-v3 0/5] vhost-scsi: Add support for host virtualized target

On Tue, Aug 21, 2012 at 08:52:06PM +0000, Nicholas A. Bellinger
wrote:> From: Nicholas Bellinger <nab at linux-iscsi.org>
> 
> Hi folks,
> 
> This is the third RFC for vhost-scsi patches against mainline QEMU v1.1
I rebased on top of 1.2 and put this in my tree:
git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git pci

Please check it out, meanwhile we'll see if anyone complains.

-- 
MST

Reasonably Related Threads

Search for more reasonably related threads

Virtualization - Aug 2012 - [RFC-v3 0/5] vhost-scsi: Add support for host virtualized target

[RFC-v3 0/5] vhost-scsi: Add support for host virtualized target

[RFC-v3 1/5] monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param

[RFC-v3 2/5] vhost: Pass device path to vhost_dev_init()

[RFC-v3 3/5] vhost-scsi: add -vhost-scsi host device for use with tcm-vhost

[RFC-v3 4/5] virtio-scsi: Add start/stop functionality for vhost-scsi

[RFC-v3 5/5] virtio-scsi: Set max_target=0 during vhost-scsi operation

[RFC-v3 0/5] vhost-scsi: Add support for host virtualized target

[RFC-v3 0/5] vhost-scsi: Add support for host virtualized target

Reasonably Related Threads