tinc - May 2017

Saturday May 27 2017
TimeRepliesSubject
3:46PM 1 Replacing of non-alphanumeric chars in Name can be confusing
8:12AM 1 How can I resolve the "abc (x.x.x.x port 655) could not flush for 14 seconds (15846 bytes remaining)"
 
Friday May 26 2017
TimeRepliesSubject
1:10PM 1 What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error
10:03AM 0 What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error
1:30AM 3 What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error
 
Wednesday May 24 2017
TimeRepliesSubject
3:48PM 1 Does the INT signal will force the tinc to re-read the tinc.conf file
2:23PM 0 How to improve/resolve the Flushing xxx bytes to node would block?
 
Monday May 22 2017
TimeRepliesSubject
7:02PM 0 Advertising a Public IP address
2:30PM 0 Advertising a Public IP address
9:22AM 0 Advertising a Public IP address
9:03AM 6 Advertising a Public IP address
 
Thursday May 18 2017
TimeRepliesSubject
4:15AM 1 How can I change the speed of tun interface?
2:13AM 1 Improving packets/sec and data rate - v1.0.24
 
Wednesday May 17 2017
TimeRepliesSubject
11:27PM 0 Any speed limit suggestion for tinc?
10:10PM 0 Improving packets/sec and data rate - v1.0.24
7:50PM 3 Improving packets/sec and data rate - v1.0.24
5:26PM 0 Improving packets/sec and data rate - v1.0.24
5:17PM 2 Improving packets/sec and data rate - v1.0.24
5:00PM 0 Improving packets/sec and data rate - v1.0.24
4:43PM 1 Any way to set the subnet/suggest of invitation?
12:08AM 2 Improving packets/sec and data rate - v1.0.24
 
Thursday May 11 2017
TimeRepliesSubject
7:01PM 0 LocalDiscovery flip flopping and network design tips
5:46AM 0 What's the weight means in the dump of edge info from USR2?
3:40AM 2 LocalDiscovery flip flopping and network design tips
12:03AM 2 What's the weight means in the dump of edge info from USR2?
 
Wednesday May 10 2017
TimeRepliesSubject
11:50PM 1 If two identical host get up, what will happen?
6:02PM 0 What's the weight means in the dump of edge info from USR2?
5:54PM 0 tinc to create VPN between cluster nodes (at different datacenters) for High Availability
5:46PM 0 If two identical host get up, what will happen?
7:41AM 2 What's the weight means in the dump of edge info from USR2?
 
Tuesday May 9 2017
TimeRepliesSubject
11:24PM 2 tinc to create VPN between cluster nodes (at different datacenters) for High Availability
9:28AM 3 If two identical host get up, what will happen?
 
Monday May 8 2017
TimeRepliesSubject
10:42PM 0 Show the subnets learnt and update configuration without reset?
 
Saturday May 6 2017
TimeRepliesSubject
3:32PM 2 Show the subnets learnt and update configuration without reset?
 
Friday May 5 2017
TimeRepliesSubject
3:45AM 2 Subnet authority and trust
 
Thursday May 4 2017
TimeRepliesSubject
9:24PM 2 How tinc route traffic when two subnets are identical?
4:04PM 0 How tinc route traffic when two subnets are identical?
12:00PM 0 How tinc route traffic when two subnets are identical?
7:45AM 4 How tinc route traffic when two subnets are identical?
 
Wednesday May 3 2017
TimeRepliesSubject
4:43PM 0 Multi tenancy setup by Tinc?
4:15PM 0 Multiple default gateway from tinc node
6:35AM 2 Multi tenancy setup by Tinc?
6:15AM 2 Multiple default gateway from tinc node
 
Tuesday May 2 2017
TimeRepliesSubject
4:59PM 1 Different UDP and TCP ports?
4:50PM 0 Different UDP and TCP ports?
4:40PM 2 Different UDP and TCP ports?
4:40PM 0 Multi tenancy setup by Tinc?
4:36PM 0 Multiple default gateway from tinc node
1:53PM 4 Multiple default gateway from tinc node
12:46PM 2 Multi tenancy setup by Tinc?
10:33AM 0 Multiple default gateway from tinc node
6:56AM 1 Multiple default gateway from tinc node
5:43AM 0 Multiple default gateway from tinc node
1:16AM 4 Multiple default gateway from tinc node
 
Monday May 1 2017
TimeRepliesSubject
8:37PM 0 Multiple default gateway from tinc node
3:35PM 2 Multiple default gateway from tinc node
3:35PM 0 Multiple default gateway from tinc node
12:50PM 1 How to set Subnet in a node which act as both server and client role?
12:49PM 1 How to set Subnet in a node which act as both server and client role?
12:20PM 0 Concept clarification between multiple ConnecTo and multiple netname
12:16PM 2 Concept clarification between multiple ConnecTo and multiple netname
12:09PM 0 How to set Subnet in a node which act as both server and client role?
10:39AM 0 Concept clarification between multiple ConnecTo and multiple netname
10:33AM 0 How to set Subnet in a node which act as both server and client role?
10:30AM 2 How to set Subnet in a node which act as both server and client role?
10:28AM 0 How to set Subnet in a node which act as both server and client role?
10:23AM 1 How to set Subnet in a node which act as both server and client role?
10:00AM 4 How to set Subnet in a node which act as both server and client role?
7:29AM 0 Why host-up script triggered even not ConnectTo?
7:24AM 2 Why host-up script triggered even not ConnectTo?
7:16AM 0 Why host-up script triggered even not ConnectTo?
7:12AM 3 Why host-up script triggered even not ConnectTo?
7:07AM 0 Why host-up script triggered even not ConnectTo?
6:15AM 2 Why host-up script triggered even not ConnectTo?