Config: DFI 855GME-MGF board, r8169 on-board ethernet Etherboot 5.4.1 run from a floppy Downloads pxelinux.0 version 3.11 via TFTP Stops dead after: ... My IP address seems to be C0A80132 192.168.1.50 ip-192.168.1.50:192.168.1.10:0.0.0.0:255.255.255.0 If I change it to pxelinux.0 version 2.13, it continues and loads pxelinux.cfg/C0A80132, linux and rootfs.gz and then stops dead after: Loading rootfs.gz.......................................................... Ready. This combination of DHCP server, pxelinux, linux and rootfs.gz has been successfully loading a couple of different types of boards (from ROM, not floppy) for a few months. Any ideas on what is wrong? Thanks, Steve
Config: DFI 855GME-MGF board, r8169 on-board ethernet Etherboot 5.4.1 run from a floppy Downloads pxelinux.0 version 3.11 via TFTP Stops dead after: ... My IP address seems to be C0A80132 192.168.1.50 ip-192.168.1.50:192.168.1.10:0.0.0.0:255.255.255.0 If I change it to pxelinux.0 version 2.13, it continues and loads pxelinux.cfg/C0A80132, linux and rootfs.gz and then stops dead after: ... Loading rootfs.gz.......................................................... Ready. This combination of DHCP server, pxelinux, linux and rootfs.gz has been successfully loading a couple of different types of motherboards (from BIOS, not floppy) for a few months. Any ideas on what is wrong? Thanks, Steve