Hu, Eric Jianzhong (Eric)
2007-Dec-23 19:30 UTC
[Speex-dev] Nominal Jitter buffer Configuration.
Hi All, I have a question regarding the nominal jitter buffer configuration: The call was setup as G.729A (annexb=no), ptime=20ms and nominal jitter buffer size = 50ms, and round trip delay is 200ms, the TDM side will experience intermittent one way voice during the call, but IP side can always heard the voice from TDM side. My question is, should this possible caused by the nominal jitter buffer? If there didn't have large network jitter, should the nominal jitter buffer set to 10 or larger and what's the impact? Thanks, Eric -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/speex-dev/attachments/20071224/211b02bd/attachment.html
> The call was setup as G.729A (annexb=no), ptime=20ms and nominal jitter > buffer size = 50ms, and round trip delay is 200ms, the TDM side will > experience intermittent one way voice during the call, but IP side can > always heard the voice from TDM side. My question is, should this > possible caused by the nominal jitter buffer? If there didn't have large > network jitter, should the nominal jitter buffer set to 10 or larger and > what's the impact?What do you mean by "nominal jitter buffer"? Also, what version are you using? Jean-Marc