similar to: Jumbo Frames for PV ethernet drivers

Hi, I have an XCP 0.5 box running a few DomUs some of the DomU''s data is stored at (clustered lvm volumes on) a Coraid etherdrive box which is connected via an Ethernet cable to a dedicated card of the XCP box, for which in the network config I'' ve specified: MTU=9344: xe network-param-list uuid=.... gives: MTU ( RW): 9344 on the DomUs if I leave the MTU at 1500 (default

Hello all, Not sure if I am completely missing something but here goes. I have XCP 1.0 running without any issues. I have the mtu set on both the storage network, the corresponding PIF, and the VIF to 9000 and when displayed in ifconfig it shows that this is indeed true. I have several CentOs 5.6 VMs running in HVM mode (i.e. no xen kernel) which attach to the the storage network through these

Hello! I installed NexentaOS (Opensolaris kernel b104+). First booting system is true. Before first rebooting system updates boot_archive. It''s false. Computer is freeze and CapsLock and ScrollLock is blinking. Helps only RESET button. My system is Ubuntu 8.10, kernel-2.6.30-rc3-tip, Xen-3.4-Stable with debug options enabled. My hardware: AMD Athlon64X2 5400+, RAM 4GB. For DomU: mem=1024,

Hello! Can i get uuid of DomU from this DomU ? What is needed? Thanks. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Can i using pv-grub for loading OpenSolaris on zfs volume? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello! My Dom0 config: Xubuntu 8.10 + "Xen-3.3.1 and kernel-2.6.18-xen.hg" I have Nexenta CP2 RC1 (Opensolaris b104) on ZFS file system. I installed this OS in HVM. For PV i used pygrub. My config file: ''ncp2.pygrub'' bootloader = "/usr/bin/pygrub" boot = "c" memory = 512 name = "NexentaPV" uuid =

Author: mabloom Repository: /hg/zfs-crypto/gate Revision: 39c5623029b347adbf2ab92400d25328f7b321ee Log message: 5084264 Error messages output when configure jumbo frames using bge.conf Files: update: usr/src/uts/common/io/pci_pci/pci_pci.c

root at ne-vlezay80:~# tcpdump -i tap0 -n tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 262144 bytes 00:23:53.206672 ARP, Request who-has 10.194.0.2 tell 10.194.0.200, length 28 00:23:53.206691 ARP, Reply 10.194.0.2 is-at 52:54:00:38:b9:0b, length 28 00:23:53.710691 STP 802.1d, Config, Flags [none], bridge-id

The documentation says the bridge will work as far as all interfaces have the same MTU, but I also read on this and other mailing lists people having problems when using jumbo frames. What is the current status of jumbo frames support in the bridge? It could also be useful to have the same info on the wiki page. Thanks. -- Luca Lesinigo -------------- next part -------------- An HTML

Hi, I searched the mailman archives for this topic and there were some older messages that indicate that a large MTU should work, but it's not going too well here. I've got three systems (A, B, and C) with kernel 2.6.12.2; there are back-to-back gigabit connections between A & B and between B & C. Testing prior to bridging, the MTU is set to 9000 on every interface and a 100 MB

Hi, As of now I have been using xVM on Solaris 11 Express b151a. And I am looking for PV Driver for Windows 2008 and Windows 2008R2. So which open source PV driver can I use for these OSs? And I feel the the performance of PV drvier on Windows 2003 I downloaded from Sun site, this is early driver, is bad. The network performance is usually 20kbp/s. So I want to know how I can get better

I have NexentaCP2 (Opensolaris b104+). Parameters for the kernel: ''zfs-bootfs=syspool/rootfs-nmu-000,bootpath=/xpvd/xdf@0:a'' Pygrub returns: ''zfs-bootfs=syspool/30,bootpath=/xpvd/xdf@0:a'' Result: Boot with pygrub don''t work. What is "30" in syspool/30 ? _______________________________________________ Xen-users mailing list

Copied ramdisk and kernel to Dom0 root@ServerXen331:/mnt/home/boris/isos# cat copy.sh mount -o loop,ro os200906.iso /mnt cp /mnt/boot/x86.microroot /home/boris/solaris cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris Created profile like for osol 2008.11 root@ServerXen331:/mnt/home/boris/solaris# cat osol200906.install name = "sol0906" vcpus = 1 memory =

Is support for usb devices on the radar for xVM integration? -- paul

Hi. I tried to use OpensolarisPV under Xen. For virtual disks i tried to use ''file'' and ''blktap'' types of VD: 1. when i use ''file'' then all works, but have not any information about disk: vendor name, uuid, ... (iostat -En don''t return any info) 2. when i use ''blktap'' then fdisk not works. (fdisk

Hi everyone, I have looked through the list archives and seen a few posts about jumbo frame support, but there is no definitive answer on whether or not it has been tested or is working for anyone. I tried using an MTU of 9000 in a domU and encountered some very interesting and not-so-great results. My machines used in this test are: * NFS (physical) * dom0 (physical) * domU (virtual)

Same picture for any repo. --- On Tue, 10/6/09, John Levon <john.levon@sun.com> wrote: From: John Levon <john.levon@sun.com> Subject: F12 rawhide PV HTTP install To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: xen-discuss@opensolaris.org Date: Tuesday, October 6, 2009, 5:49 PM On Tue, Oct 06, 2009 at 07:19:40AM -0700, Boris Derzhavets wrote: > I''ve

Hi, ¿ I would like to know how can I use Gigabit Jumbo Frames inside Xen ? I''ve set my eth0 and peth0 mtu to 7000 My question is : Do I should set the mtu inside each domU ? Regards _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, Increasing MTU beyond 1500 in Linux dom0 results in ooopses. I did not find any statement whether 2.0 series support jumbos or not in dom0. Does it? TIA, Teemu -- _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

When trying to boot the OpenSolaris b75a dvd in a pv domU (using the linux phy:/dev/cdrom device as the source for the boot media), running on an Ubuntu 7.10 x86_64 dom0 box with xen 3.1.0 hypervisor, using the following config file... ======================================== # # Hostname # name = ''solaris-install2'' # # Kernel + memory size # kernel =