similar to: Fedora 11 DomU

This is my install profile F11.install name="FC11-G1S2" memory=500 disk = [''phy:/dev/sda3,0,w'' ] vif = [ ''bridge=eth0'' ] vfb = [ ''type=vnc,vncunused=1''] kernel = "/etc/xen/vm/vmlinuz.1" ramdisk = "/etc/xen/vm/initrd.img.1" vcpus=1 on_reboot = ''restart'' on_crash = ''restart''

I'm not able to add machine account(specifically Samba member servers) to my Samba 3.0 Domain. When I try to run 'net rpc join' and provide the root credentials, I get 'NT_STATUS_NO_SUCH_USER' in the output. My domain database is in LDAP and root is a local unix user. I know auth works, because 'net rpc info' works. It seems there's a problem mapping between the

As I understand concept of xenballooning, it allow to take memory from guest and return it to hypervisor. This allow to reduce amount of memory allocated to VM in realtime without rebooting VM. But how we can add more memory to guest VM in realtime, than was at boot time? Can we somehow make balloon inflated at start time? (F.e. VM starts with memory = 512Mb and balloon inflating to +512Mb).

Hi Pasik, Do we have a way to build a 2.6.34 kernel as dom0 kernel can you show me the way? Thanks Lei _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Distro: debian unstable Xen version: 4.0.0-2 This is the config: #HVM #still no qemu-dm in debian #kernel = "/usr/lib/xen-4.0/boot/hvmloader" #builder = ''hvm'' #memory = 2048 #name = "webserver" #vif = [''bridge=eth0''] #disk = [''tap:tapdisk:aio:/srv/xen/webserver.img,xvda,w'',''phy:/dev/cdrom,xvdb:cdrom,r'']

Hi, can anyone provide any pointers as to how to avoid this issue? A CentOS 5.3 domU on snv_111 dom0 is crashing on bott unless I remove /lib/modules/2.6.18-128.1.6.el5/kernel/drivers/xenpv_hvm dom0: haggis:~$ uname -a SunOS haggis 5.11 snv_111 i86pc i386 i86xpv Name: SUNWxvm Summary: Hypervisor Header Files Category: System/Virtualization State: Installed

Hi, My configuration is the following: Xen 3.3.1 compiled from sources(with PAE enabled) Dom0 Debian Etch i386 I''m trying to create Debian domU from scratch with netinst and get the kernel and ram disk to boot to installation procedure from install.386/ folder of netinst iso image. Then I use the following config file debian.cfg for installation: kernel =

Hi, I am a Xen newbie and have been trying to get Xen-3.4.1 working on my Ubuntu Lucid (kernel version 2.6.32-21) system, using kernel 2.6.18.8 as dom0. In attempting this, I ran into the following issue. On booting into Xen, I get these errors: Mounting none on /dev failed. No such device. ... Gave up waiting for root device. ... Alert! Could not mount /dev/sda1 as root device. Dropping to a

Hi Everyone, In my HVM guest''s config file, I have given my guest 3 interface. I have called them fw1, fw2 and fw3. I have joined each interface to a bridge on the Dom0. This does appear when I do a "brctl show". However, there are 3 other interfaces also added called tapx.0,tapx.1 and tapx.2 (Where x is the domain ID for the guest). Furthermore, I am only able to run

Hi Guys! I have a very interesting problem. I run gentoo and have been running xen-3.4.2 on 2 server computers (Supermicro-based, IBM). A little time ago, I have tried to upgrade xen-3.4.2 to xen-4.0.0 (with emerge) on the Supermicro server, but the computer wasn''t able to boot with the following breakdown: [ 62.848947] 0800 1315427328 sda driver: sd [ 62.849264] 0801 208813 sda1 [

Hi everyone, I''ve compiled 3.0.0-rc6 from kernel.org , with all the pv_ops config options set as per the Xen wiki. The kernel boots fine, but not in combination with Xen. All i get is a completely blank screen , and after a minute or so the machine reboots. THe hypervisor seems to work OK with other (non-dom0 , 2.6.32.x) kernels, i can see Xen startup messages, before it finally

If i will use a virtualbox image with xen Must ionly convert it to raw and copy the hole image to a lvm or harddisk Or are it more advanced? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, I''ve prepared a Ubuntu 10.04 LTS server on a Xen 3.2-1 host running Debian Lenny on kernel 2.6.26-2-xen-amd64. The Ubuntu 10.04 domU is running a 2.6.32-24-server kernel from the Ubuntu repositories, which is (must be :-) ) xen-aware. The domU uses pygrub to boot and it works like a charm. Now I''m trying to deploy this domU on a Xen 3.2-1 host running Debian Etch on kernel

Are these the current functional procedures for dropping a dom0 on a jaunty 64 bit server? xen-tools: http://bderzhavets.wordpress.com/2009/08/14/attempt-of-prevu-xen-3-4-1-hypervisor-on-ubuntu-jaunty-server-64-bit/ kernel: http://bderzhavets.wordpress.com/2009/07/07/building-xenified-2-6-30-1-kernel-via-xen-patches-2-6-30-2-tar-bz2/ Regarding the patches used in the above procedure from here:

Hi, I have uploaded a new set of rebased openSUSE dom0 xen patches and Gentoo ebuild for 2.6.31 to http://code.google.com/p/gentoo-xen-kernel/downloads/list, Jan Beulich recently identified the cause of the null pointer crash and other stability problems that affected previous versions and with the necessary fixes applied the kernel has run for 2+ days with no issues at all, I think you will find

Hi list. I''m running Xen 4.0.1 on Debian. I''m trying to live resize a block device : - I have a arbitrary block device in my dom0 (/dev/mapper/vm-vol42). - I start a PV domain with that device as a disk (disk = [''phy:/dev/mapper/vm-vol42,xvda,w'']). - I resize vm-vol42 in the dom0 (adding size only) - the dom0 sees the device''s new size. -

On a selection of boxes, ntpd running in Xen Dom0 reproducibly exhibits extermely high noise/jitter. Switching back to -default, non-xen kernel ntpd runs with very low jitter/noise. Question -- how can I ''tame'' ntpd noise & jitter when running in Dom0? Is the problem a config issue, or a bug? Already reported this downstream; everybody''s "stumped".

On a selection of boxes, ntpd running in Xen Dom0 reproducibly exhibits extermely high noise/jitter. Switching back to -default, non-xen kernel ntpd runs with very low jitter/noise. Question -- how can I ''tame'' ntpd noise & jitter when running in Dom0? Is the problem a config issue, or a bug? Already reported this downstream; everybody''s "stumped".

Are you expecting improvement after  09/15/2009 new-swiotlb commits ? 4097,6144, "No_dom0_mem_specified" don''t look to me to have any. Boris.   _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

I have a bit of a Xen theory question. I have a Debian 5 Lenny x64 Dom0 currently running two DomUs. One is an x64 built via Xen-tools, and it seems to be running great. The second (known as Alpha) is having some troubles, as I mentioned in my post "Ubuntu 8.04 DomU crash" to this list on 5/12/09. It is an x86/32 Ubuntu 8.04 that started life as an HVM and was rebuilt into a PV where