similar to: xvm + zones = panic (?)

Hi all Opensolaris works perfectly, but I am not able to boot the xvm kernel on this hardware. I added the -k option in grub, but the system hangs before the hostname line without any debug info. I''ve tried snv from b94 to b99, with the same results. If I install Debian with xen kernel I am able to use pvm and hvm guests. What can I do ? thanks Giacomo -- This message posted from

I''m running Xen on Nexenta Core, and I haven''t yet figured out how to control which DomU''s are started with svcadm enable svc:/system/xvm/domains:default. virsh doesn''t seem to be available with Nexenta Core, so I''d rather edit the configuration files by hand. However, I''ve found neither OpenSolaris or Nexenta documentation on how this is

After googling around and reading the material on the opensolaris.org xvm community site, I still do not understanding the configuration of networking and would appreciate some assistance. Problem: I have successfully installed an hvm domU running Windows XP on opensolaris 2005.11 (build 94), and when the laptop (lenovo t61, core2 9300) is connected via the e1000g0 interface networking works

Hello: I successfully installed Solaris10 nv77 x86 on my Compaq NX6325 laptop with the following specs: - Mobile AMD Turion 64 X2 TL-52 (dual core 64bit). - 4GB RAM. The installation destination was an external 120GB USB 2.0 drive. I was able to successfully boot into regular Solaris, but not into xVM Solaris. Meaning, after highlighting the xVM menu item and pressing enter, the screen turns

Trying to boot my Thinkpad T30 with Solaris snv_81 xVM it get the error message This version of Solaris xVM does not support this hardware The output of "echo ::interrupts | mdb -k" while booted without xVM is bash-3.2# echo ::interrupts | mdb -k IRQ Vector IPL(lo/hi) Bus Share ISR(s) 0 0x20 14/14 - 1 cbe_fire 1 0x21 5/5 ISA 1 i8042_intr 3 0x23

I''ve set xend service properties as follows: config/vnc-listen astring \''0.0.0.0\'' config/vncpasswd astring \''vnc\'' config/default-nic astring ''nge1'' but I get an authentication error whenever I try to connect to the console with ''vncviewer :0'' - I''m on the xvm host itself. other relevant data: SunOS

Hi all, I have a Toshiba Tecra M9 and have not been able to boot it dom0. This is running SXDE 01/08, snv79b. After booting under kmdb and setting moddebug=80000000 before booting the Solaris kernel (with help from Dan Mick), I was able to see mac_ether as the last thing loading, right after loading the e1000g driver. I cannot drop into kmdb via F1-A after it hangs. I''ve also

Completely fresh,virgin install of b115 SXCE ,zero modifications done. If select XVM from boot menu,it comes all the way till "Starting Desktop login on Display:0..." and reboots. Regular Solaris(not XVM) boots fine. Intel XEON CPU,8G RAM Intel S3210SHLX motherboard(http://www.intel.com/Products/Server/Motherboards/Entry-S3200SH/Entry-S3200SH-overview.htm) Please help and thanks a lot

Hello All, One of our user is facing java.lang.OutOfMemoryError: PermGen space issue on a Windows 2003 32 bit xVM domU with 4GB RAM. He is able to successfully do these tests on equivalent physical system with Windows 2003 OS and 4GB RAM. Another user is facing issues with Tomcat running out of heap space on a Win2008 64bit xvM domU Our xVM hypervisor server is X4150 server with 64GB RAM

Hi Dave, I built successfully an xvm 3.3 system. However, I found virt-manager and virt-install don''t work. I attached the error messages of both as below. xm tool seems to work. I can run OpenSolaris200811 LiveCD and install it onto file based disk. The error messages of virt-manager: ====start of error message==== Unable to open connection to hypervisor URI ''xen'':

System config:- bash-3.2# ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 rge0: flags=201004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4,CoS> mtu 1500 index 2 inet 192.168.1.53 netmask ffffff00 broadcast 192.168.1.255 ether 0:1e:8c:25:cc:a5 lo0:

Apparently the b89 xvm-src.tar.bz2 tar bz2 archive is corrupted / truncated on the b89 source download page: http://dlc.sun.com/osol/on/downloads/b89/ http://dlc.sun.com/osol/on/downloads/b89/xvm-src.tar.bz2 In the past, the xvm-src.tar.bz2 file had a size of ~ 100 mbytes; with b89 the size of the downloadable archive is only 72 mbytes. And bzip2 complains: % bzip2 -tv

During boot, I get the following error: Nov 16 09:16:41 sol11 svc.startd[7]: [ID 652011 daemon.warning] svc:/system xvm/store:default: Method "/lib/svc/method/xenstored start" failed with exit status 96. Nov 16 09:16:41 sol11 svc.startd[7]: [ID 748625 daemon.error] system/xvm/store:default misconfigured: transitioned to maintenance (see ''svcs -xv'' for details) It

Hi all, I''m in the process of building a home server with OpenSolaris 2009.06. It''s main function is to serve files (hence using OpenSolaris for some ZFS goodness), but I want to host some Windows x64 VMs on it as well. Given that there are currently no x64 Windows drivers for xVM, I was thinking of starting with VirtualBox (which does have x64 Windows drivers), and then

Hi, I''ve started to play with CPU power management today, and that didn''t work at first. By default, my OpenSolaris host boots with a xVM enabled kernel. I reboot it with a standard kernel to see, and then CPU power management works perfectly. I searched a long time, but I didn''t find anywhere a word about CPU power management disabled when using an xVM kernel.

Bfu 91 to 92 looks good Proceed with xVM upgrade . After running:- # sunos.hg/bin/build-all nondebug bash-3.2# cd packages-nondebug bash-3.2# pwd /usr/tmp/packages-nondebug bash-3.2# ls -l total 20 drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWlibvirt drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWlibvirtr drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWurlgrabber

Hi, I double checked the configuration with xm and the "w!" option seems to be configured :-( I also upgraded to build 123, but also no change in behaviour. Thus is this a RAC 11.2 problem or is there a general problem using zvols as as shared disks for xVM domains ? (device (vbd (protocol x86_64-abi) (uuid 048d282d-da4c-2e0b-b9f4-f3f4cc0811c7)

Hi all, I installed 2009.06, xVM and happily installed a domU with no issues. I just did this through the virt-manager GUI, and kept it as simple as possible. Later I installed and booted a zone with very simple and standard configuration. My existing xVM virtual machine did not immediately stop working, or have any interruption at all. But, I can no longer create new virtual machines, or even

I have a Sony lib-162 tape library hooked up to an adaptec 39160 scsi controller. I''m running OpenSolaris / Indiana snv_98 with the CADP160 driver installed from a SXCE dvd (snv_99). When I boot without xvm, I can run "mt config" and see the configuration information for the first drive in the library. Under xvm, some scsi operations still work - I can access the changer, move

Hello all. We''re a pretty traditional old school sun shop w/a few dozen sun boxes from 1999-2004. We''re doing a try and buy on a sun blade 6000 with a couple of 6250 intel blades and a 6320 blade, looking to use multiple chassis to do a consolidation, using ldoms and xvm server with xvm ops center to manage it all. At least that''s our forward looking plan.... to move