similar to: SATA pass-through woes

Hi All, I hope I'm posting this to the appriopriate list, and that cross posting to two lists is OK. (If not, I'm sure I'll hear about it quickly :)) I'm running Asterisk on my (new) VIA EPIA-V motherboard. This seems to be the ideal platform for a home version of asterisk - its small, quiet, low power, and should have plenty of computing horsepower if only it would work!

Please can you do an ''lspci -nv'' to find out the exact version of your controller. I''m wandering whether it features in pci/quirks.c and whether the fixup code is borked on Xen. Also, have you tried fiddling around with any of the BIOS IDE legacy mode settings? There really is no good explanation for a) why the MMIO region is so low on native, and b) why it is

Hey hope this opne is a "make senser". Has anyone tried the "Subject line" combo?, I''ve compiled a dozen src.rpm kernel 3.0 and 3.1 packages with no luck to try native upstream Dom0 kernel support with no success, just a kernel oops and constant reboots. I followed Fedora''s wiki on building a custom kernel, even used F16''s .config which also was a

Hey hope this opne is a "make senser". Has anyone tried the "Subject line" combo?, I''ve compiled a dozen src.rpm kernel 3.0 and 3.1 packages with no luck to try native upstream Dom0 kernel support with no success, just a kernel oops and constant reboots. I followed Fedora''s wiki on building a custom kernel, even used F16''s .config which also was a

I tried to install and boot a 2.6.7 Dom0 xenLinux Kernel on an SMP (Dual-Xeon) Machine with 2 3-ware Controllers installed (1 4-channel Controler and 1 8-channel Controler, both Parallel ATA) and no other HDs present (except the ones connected to the 3ware controlers, of course). First of all I got a compilation error after activating the SMP option in the kernel config. After deactivating the

CentOS 4.3 (fully updated, including CentOS Plus kernel). Running KDE 3.5.2 (fully updated from redhat.kde repo). I can't seem to get the OS to recognize my SD card when inserted into my USB card reader. Mepis 6 Beta 3 has no problem with it. DMESG sees nothing happening when the card is inserted. USB-STORAGE module is loaded.

Hi, I'm new to asterisk, in order to enable X-lite to make a call, what should i do before making a call? Current stage, 1. i have create a few accounts in sip.conf. 2. Registration are successful. Pls advice me how to continue then... Thanks _________________________________________________________________ Personalize your Live.com homepage with the news, weather, and photos you

Greetings, I am resending this as it doesn't appear in the archives and no one responded...maybe it got routed to /dev/null or something :-) I have asked this question the Scientific Linux mailing list (a few months ago) and got the suggestion I talk to the kernel guys. I pinged a kernel guy I know, and his suggestion was to ask the Nouveau list. So here I am. :-) I have had my work laptop

Hello, A user (cc'd) reported that nouveau's enabling of MSI causes the card to not work on his setup [1]. I think the situation is that MSI is just not supported by the underlying motherboard, even though the card, and probably bridge, support it just fine. It's a very old board. The nouveau code does: pmc->use_msi = pci_enable_msi(device->pdev) == 0; Does it need to do more

PC: HP Vetra VL400 Mainbood: Intel815 BIOS: Phonix 4.0 release 6.0 OS: REDHAT 9.0 I installed the X100P in PCI slot 2 and disable the USB port, serial-port and parallel-port in BIOS. I can't found the X100P card in " cat interrupts" But I can found the card in the "cat ioports" use "lspci" I found the X100Pcard use the interrupts 11 too. Who can help me to solve

Hello, I am having problems, getting my asterisk-domU to work properly. It consists of the following components: - Debian Etch under Xen-3.1 with a 2.6.18-kernel - Asterisk 1.2.24 - mISDN-1.1.5 I have 2 HFC-ISDN-cards, which I pass through to the Asterisk-DomU in permissive mode. This is working fine. The strange problem is, that the two HFC-ISDN-cards are not beeing initialized by the

I recently moved my CentOS 4.5 disk from a Lenovo ThinkCentre M52 (3.2 GHz Pentium 4) to a Lenovo ThinkCentre M55 (3.4 GHz Core 2 Duo). I had to install the SMP kernel, but other than that everything just worked. I did have an issue with accidentally initializing my /boot partition, but that was my own fault. But the system was not feeling right. Some things just seemed to be slower,

I mistakenly only replied to Yijing Wang the first time. Here are the further details. uname -a: Linux p5-133 3.15.2-p5-133 #1 Thu Jun 26 22:56:27 EDT 2014 i586 GNU/Linux Here is the output from lspci -vvvxxx: root at p5-133:~# cat lspci.txt 00:00.0 Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-

*RESEND* due to exceeding the mailinglists limit for attachment size. Hi, I''m trying to get secondary vga-passthrough on a HVM guest to work with a AMD HD6570 and the native kernel radeon driver and kernel modesetting. So the guest still gets the emulated stdvga or cirrus device(used in my case here) as primary/boot vga adapter. - When i don''t passthrough the radeon card, the

Hi, I using asterisk 1.2.4 on a CentOS with Linux 2.6.9-22.0.2.ELsmp kernel. I've two x100p cards connected, only one card is reconigzed by asterisk. 02:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface 02:02.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31) 02:03.0 Communication controller: Tiger Jet

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation

Hello, I have a PC Chips A31G board with AGPro slot and found that nouveau does not work properly with it. Console works but reverts to software mode, X11 hangs with mouse cursor only. The slot is physically AGP 1.5V but is wired to PCI bus as the chipset (SiS 761) does not support AGP cards. To further complicate things, the chipset has AGP capability - but only for the integrated video. You can

Yijing, cat /sys/bus/pci/devices/0000\:00\:0e.0/msi_bus returns 1, suggesting that it supports MSI. However, this "00:0e.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)" is a component of the addin card. Wouldn't the lack of support for MSI by the chipset "00:00.0 Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev 01)"

On Thu, Jul 3, 2014 at 10:35 PM, Yijing Wang <wangyijing at huawei.com> wrote: > Hi Brian, > From your 01:00.0 VGA compatible controller PCI config register, it supports 1 MSI vector, so I think this > card has no problem. But you didn't answer what's the pci_enable_msi() return during it enable MSI fail. > > You can check PCI bus whether support MSI like: > >

Hi! I tried to pcipassthrough usb-controllers to domu to use it with a memory-stick. First xen complained that the driver needs write-access to its configuration space, so I added these to pci-quirks. Since it still didn''t work I also added the device to pci-permissive but I still get an errormessage with Oops (at the end of this email) when sticking in the memory-stick. I tried