similar to: reboot after "scrubbing free ram"

Hi, I installed Xen 4.0.1 from source on Debian 5.0.8 and when boot my computer hardware reboots at like "Scrubbing Free RAM". I tryed to find some information here but none was helpfull to me. Anyone? I have 4GB memory and a AMD Turion II X2 M500 (

Hi Everyone I have sorted out the initial issues I''ve had and decided to give Xen another go. I''m trying to run Xen using kernel 2.6.37-rc3 (previous attempt with rc1 failed, and when I gave it a second go, rc3 was already out). As previously, 2.6.37-rc3 boots fine natively. 2.6.32 boots natively and under Xen as dom0, but I have reservations against running 2.6.32,

Hi Everyone I have sorted out the initial issues I''ve had and decided to give Xen another go. I''m trying to run Xen using kernel 2.6.37-rc3 (previous attempt with rc1 failed, and when I gave it a second go, rc3 was already out). As previously, 2.6.37-rc3 boots fine natively. 2.6.32 boots natively and under Xen as dom0, but I have reservations against running 2.6.32,

Hi Folks: I run into a problem when enabling Xen in next generation server platforms with Xen c/s is 21380. Xen reported "CPU Not responding" when booting up 32 CPUs( 2 sockets with 8 cores/16threads total). The log files belonging showed something wrong with APCI. So I added x2apic=0 in the xen grub line, but the symptom remained. However, Native RHEL5.5 can

Hi, I''ve not tried pv_ops for a long time but just got a new system (Supermicro X9DRL-iF) so decided to try 3.5.0 with the latest Xen 4.2-unstable, unfortunately the system crashes immediately after loading dom0: traps.c:486:d0 Unhandled invalid opcode fault/trap [#6] on VCPU 0 [ec=0000] I''ve tried loading both bzImage and vmlinuz (gzip compressed vmlinuz) with the same

Hello, I''m getting many "Error getting mfn" on a xen4.1.3 with dom0 3.4.11 x86_32. I thought it could be related to xen/mmu: Release just the MFN list, not MFN list and part of pagetables. http://git.kernel.org/?p=linux/kernel/git/konrad/xen.git;a=commit;h=785f62314984ea3af9dd830b020289ba2509ae69 (XEN) Freed 212kB init memory. (XEN) mm.c:908:d0 Error getting mfn 2009b (pfn

Hello, I''m trying to compile Xen unstable on NetBSD, I''ve aplied the patches from http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/sysutils/xentools41/patches/?only_with_tag=MAIN and copied the blk files from http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/sysutils/xentools41/files/?only_with_tag=MAIN (I don''t know which of these patches have been applied to xen unstable, so

Hello! I was asking for help on the Freenode channel, and I was pointed here. I have a situation where, using xl, I can create a functional PV domU, with or without pv-grub, but I cannot access the console. Firing up xend and using xm works without trouble. Since xend and company is being deprecated, I would like to transition to using the xl toolstack. The system is an Arch Linux system

?Not sure if this actually made it to the list the first time.? Here is the SERIAL output (bottom of message after your questions).? Googling the error indicates it's something people ran into a few years back but was supposedly fixed.? Any ideas? I can verify that if I REMOVE the second CPU, it boots into Xen kernel no problem.? The CPU itself doesn't matter, as I can swap either

Hello, I have an odd problem on a dual processor, dual core Opteron system. Obviosously it is x86_64 so should have no problem with large amounts of RAM. The system has 4 GB installed (2GB on each processor). If I boot the system with a fresh install of Debian Etch it sees all the memory fine. dmesg reports: Memory: 4107008k/5242880k available (1929k kernel code, 86836k reserved, 864k data, 176k

Hello, I originally posted this to xen-users, but someone suggested I post it here. I am having ACPI problems on a PenguinComputing Altus1600 system. It has 2x dual core Opteron 2210 processors. The system boots with a standard Debian or Ubuntu SMP kernel, with ACPI enabled. However the xen live cd, binary xen install, as well as my own custom compile of xen 3.0.4 from source will not boot.

Hi! We have a problem that the dom0 very often does not boot and hangs in the hypervisor - see screenshot. The last message is: (XEN) Dom0 has maximum 16 VCPUs (afterwards xen should overwrite the memory) We are using the xen kernel from kernel.org git. Kernel is 2.6.32.24-xen with Xen 4.0.1 Hardware is HP DL380. Is this a known problem? Any hints what could be the problem and how we can

Hi! We have a problem that the dom0 very often does not boot and hangs in the hypervisor - see screenshot. The last message is: (XEN) Dom0 has maximum 16 VCPUs (afterwards xen should overwrite the memory) We are using the xen kernel from kernel.org git. Kernel is 2.6.32.24-xen with Xen 4.0.1 Hardware is HP DL380. Is this a known problem? Any hints what could be the problem and how we can

Hello, I''m attempting to boot Xen 4.0.1 on a SuperMicro H8DGi-F motherboard and having not much luck. I can boot the 2.6.32.26 (or .27) kernels alone, but when I add Xen into the mix, I get consistent boot failure. I''ve tried Xen 4.0.1-release, 4.0.2-rc1-pre and 4.0.2-rc2-pre, all get the same failure. xen/next-2.6.37 works and boots great, but since netback isn''t

Hi, I did a git pull on pv_ops tree this morning and now get a crash when eth0 is started, here is the full boot log: Booting ''Xen 3.4 / Linux 2.6.29-rc6-tip'' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /xen.gz com1=115200,8n1 console=com1,vga iommu=1 [Multiboot-elf, <0x100000:0x131748:0x8e8b8>, shtab=0x2c0078, entry=0x100000] module

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-1 Severity: important The amd64 Dom0 crashes in early boot-stage. For debugging purpose I logged Kernel-Dump with minicom over Serial Console: System is: Dell Poweredge R710 2x Intel XEON X5650 96GB RAM Perc H200 SAS Controller 3x SAS-Drive I see a possible conjunction with Bug #600241 but acpi=off doesn't solve this problem. Regards,

I do not seem to be able to get any where with the power management functions. I have had a look at the xenpm Wiki page, but it hasn''t helped. Its probably something completely obvious, but I can''t see it. I running Xen 3.4.0 on Centos 5.3 x86_64 using the gitco RPMs on an Intel S5000PSL motherboard with 2 x Xeon 5410s. Dom0 is running the latest Centos 5.3 kernel. My xm

Adding apic_verbosity=debug gives me that (hope nothing miss-typed as I have no serial console on this box). I found a lot of suggested workarounds: - noapic as suggested in output gives an noapic isn''t support - acpi_skip_timer_override has no effect at all Thx, Florian (XEN) Initing memory sharing. (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Getting

Adding apic_verbosity=debug gives me that (hope nothing miss-typed as I have no serial console on this box). I found a lot of suggested workarounds: - noapic as suggested in output gives an noapic isn''t support - acpi_skip_timer_override has no effect at all Thx, Florian (XEN) Initing memory sharing. (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Getting

I'm running CentOS 5.1 with all updates, and the xen kernel. For some reason the OS is not seeing the full amount of ram. #uname -a Linux CentOS-VM-A 2.6.18-53.1.21.el5xen #1 SMP Tue May 20 10:03:27 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux # free total used free shared buffers cached Mem: 6104064 3445136 2658928 0 1412236