similar to: Identifying firmware version of SATA controller (LSI)

I posted a thread on this once long ago[1] -- but we''re still fighting with this problem and I wanted to throw it out here again. All of our hardware is from Silicon Mechanics (SuperMicro chassis and motherboards). Up until now, all of the hardware has had a single 24-disk expander / backplane -- but we recently got one of the new SC847-based models with 24 disks up front and 12 in the

I am trying to setup Puppet + Mongrel on RHEL5. So far I have followed this document: http://projects.puppetlabs.com/projects/puppet/wiki/Using_Mongrel_On_Enterprise_Linux The puppetmasters all start up and Apache starts up on 8140. However, when my client connects I get the following errors: [root@lv1764p puppet]# puppetd --server puppetdev.encana.com --no- daemonize -o -v info: Retrieving

Hi, I have a server running Solaris5.6 with 32 bit, how can I turn off 64 bit, just using 32 bit? Thanks, Jennifer

Hi, I have been seeing data corruption on the ZFS filesystem. Here are some details. The machine is running s10 on X86 platform with a single 160Gb SATA disk. (root on s0 and zfs on s7) ...Sanjaya --------- /etc/release ---------- -bash-3.00# cat /etc/release Solaris 10 6/06 s10x_u2wos_09a X86 Copyright 2006 Sun Microsystems, Inc. All Rights

Greetings, We''re trying out a new JBOD here. Multipath (mpxio) is not working, and we could use some feedback and/or troubleshooting advice. The OS is oi151a7, running on an existing server with a 54TB pool of internal drives. I believe the server hardware is not relevant to the JBOD issue, although the internal drives do appear to the OS with multipath device names (despite the fact

hi, I''m using the PID provider to trace a 32-bit app, prtdiag. I''m trying to print the value of "propname" (arg1) in the following func: int picl_get_propval_by_name(picl_nodehdl_t nodeh, const char *propname, void *valbuf, size_t nbytes) ... i''ve tried many versions, but this is a representative one: 53 this string propname; 54 55

After having massive problems with a supermicro X7DBE box using AOC-SAT2-MV8 Marvell controllers and opensolaris snv79 (same as described here: http://sunsolve.sun.com/search/document.do?assetkey=1-66-233341-1) we just start over using new hardware and opensolaris 2008.05 upgraded to snv94. We used again a supermicro X7DBE but now with two LSI SAS3081E SAS controllers. And guess what? Now we get

I''m curious about if there are any potential problems with using LVM metadevices as ZFS zpool targets. I have a couple of situations where using a device directly by ZFS causes errors on the console about "Bus and lots of "stalled" I/O. But as soon as I wrap that device inside an LVM metadevice and then use it in the ZFS zpool things work perfectly fine and smoothly (no

Graham Bentley wrote: > Recently swapped out my Sony for a HP DAT and > got this first time in dmesg > > (sa0:ahc0:0:6:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error > (sa0:ahc0:0:6:0): SCSI Status: Check Condition > (sa0:ahc0:0:6:0): UNIT ATTENTION asc:28,0 > (sa0:ahc0:0:6:0): Not ready to ready change, medium may

I have a Solaris 11 build server with build 58 and a zfs scratch filesystem. When trying to upgrade to build 63 using liveupgrade I get the following upon reboot. The machine never comes up. Just keeps giving the error/warning below. Is there something I am doing wrong? WARNING: /ssm at 0,0/pci at 1c,600000/scsi at 1 (mpt0): Received invalid reply frame address 0x480 WARNING: /ssm at

Hello, I am trying to use a 1.5TB Eonstor raid array with FreeBSD 7.0, but I don't understand whether it is the raid or the scsi card or something else that is causing the computer problems when accessing the raid. My problem is that soon after recognizing the attached disk during boot, FreeBSD appears to hang for about 10 seconds and then says ahd0: Recovery Initiated - Card

Hello, I am installing Puppet Enterprise agent (puppet-enterprise-1.2.1- solaris-10-sparc) on a Solaris 10 64bit SPARC system. When I view the logs for the agent I see: puppet-agent[14680]: [ID 702911 daemon.error] Could not run Puppet configuration client: Could not retrieve local facts: private method `split'' called for nil:NilClass The client successfully initiates a cert exchange

Hi all, IHACWHAC (I have a colleague who has a customer - hello, if you''re listening :-) who''s trying to build and test a scenario where he can salvage the data off the (internal ?) disks of a T2000 in case the sysboard and with it the on-board raid controller dies. If I understood correctly, he replaces the motherboard, does some magic to get the raid config back, but even

Hello, I have a CyberPower CP1500PFCLCD and I'm trying to get nut to see it under OpenIndiana. All search online suggested that it basically can't happen, but I decided to ask again, maybe things have changed since then. The UPS can be seen by the system: # /usr/sbin/cfgadm -lv usb9/1.1 Ap_Id Receptacle Occupant Condition Information When Type

Jeff Creek wrote: > I posted this in ZFS-Discuss. Eric Schrock suggested I ask in this forum. > > I am trying to test a new setup of NV74. I have set up the system with ZFS boot. Everything works fine until I pull a drive. The system locks up when I try to run any command e.g. zpool status. There is no communication with the server from then on. It does not even respond to pings. >

This is my first post here, and i hope it is ok that i posted in this thread. I have been doing a bit of reading on the solaris platforms, and seem to be inclined to try out the open solaris os or solaris 10. My only worry is that my lack of knowledge with the command line may make this difficult regarding trouble shooting. It seems fairly straighforward creating zpools etc, but maybe nexenta is

Completely fresh,virgin install of b115 SXCE ,zero modifications done. If select XVM from boot menu,it comes all the way till "Starting Desktop login on Display:0..." and reboots. Regular Solaris(not XVM) boots fine. Intel XEON CPU,8G RAM Intel S3210SHLX motherboard(http://www.intel.com/Products/Server/Motherboards/Entry-S3200SH/Entry-S3200SH-overview.htm) Please help and thanks a lot

Hi, Can I use some commands or scripts to get CPU temperature on Solaris(10 or snv, whatever)? My laptop is Lenovo T61. Great Thanks Jason

Author: venki Repository: /hg/zfs-crypto/gate Revision: 788cf7ed61f9bf13849f6ddcaa2c9f428a6fd707 Log message: 6423534 prtdiag does not display locations of PCI or USB devices (Chicago) Files: update: usr/src/cmd/picl/plugins/sun4u/chicago/frutree/system-board.info

Hi, Yesterday I got all my disks in two zpool disconected. They are not real disks - LUNS from StorageTek 2530 array. What could that be - a failing LSI card or a mpt driver in 2009.06? After reboot got four disks in FAILED state - zpool clear fixed things with resilvering. Here is how it started (/var/adm/messages) Feb 23 12:39:03 nexus scsi: [ID 365881 kern.info] /pci at 0,0/pci10de,5d at