similar to: udev timeout when reboot dom0

Hello all, I just notice the new feature in the latest version 4 release. Any one know how to do this ? I have tried lvextend the partition size in dom0, but domU doesn''t see the change. I also need to reboot to make domU reread the block size. Any idea? Best regards, Chao-Rui _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Hi, DomU is a Win2008 R2 64 When i install the GPLPV drivers the network latency goes from 15ms to random numbers up to 1200ms and eventually dies. If you run a ping from the DomU to another host the network stays alive but the high latency is still there. Further more if i try and uninstall the network driver i am unable to use the old one (realtek) as it cannot detect the device.

Well, I seem to have developed a strange issue with the GPL PV drivers in Windows. I''m running Xen 3.2 on SLES 10 SP2 and running some Windows XP HVM domUs. Most (12-15) of my Windows machines work just fine. Two of them, though, have started exhibiting a strange behavior with intermittent network connectivity. Basically, the network starts up and connects initially. After some

    Question: can dom0 in Xen4.0 be rebooted (from domU or from within dom0) anytime without loosing anything ? If so, please provide details. If not, does Xen.org have this in roadmap ? The closest posting I found (old one) is: http://lists.xensource.com/archives/html/xen-devel/2005-07/msg00885.html The option is parameter as below (but this grub conf) noreboot Debugging Requests that

Hey, everyone, I''m running Xen 3.2 (SLES10) and trying to get an OpenSolaris PV domU to run correctly. I''ve followed a couple of the instruction sets out on the Xen wiki and other folks blogs, but I''m running into an issue with the domU crashing. The OpenSolaris version is the latest development release - 5.11-0.128. The config looks like this:

When trying to use the GPL PV drivers with Windows 7 x64 (and testsigning turned on), I get a BSOD with a STOP 0x00000101 error. There''s also an error at the top that says "A clock interrupt was not received on a secondary processor within the allocated time interval." Is this STOP error related to the HPET or other timing adjustments for Xen? Any advice on things I should

I'm attempting to configure Samba with CUPS as a centralized print server. I've done this in the past - my current production server is running Samba 3.2.14. On my current production server, I have several users set up as either "admin users" or "print admin" users so that they can manage the drivers, etc., on the Samba server. In setting up my new server, I'm

I build a DomU kernel on RHEL AS5.1. But when I boot this Guest DomU with the kernel, it gives me error message: Error: (2, ''Invalid kernel'', ''xc_dom_compat_check: guest type xen-3.0-x86_32 not supported by xen kernel, sorry\n'') Can someone give me any suggestion about this problem? Thank you! Joe _______________________________________________ Xen-users

This may be a better question for the Xen-Devel list, but I''ll start here... Does anyone know if there is any easy way to replace the gPXE ROM with a newer version in Xen? Also, anyone know if there are any plans to have some sort of option in the domU config file to specify a boot rom? Looks like qemu-dm has an "-option-rom" option - is there any way in Xen to make use of

I''m running SLES10 SP1 and have been using file:/ for my file-backed domUs. The domUs sit on a shared OCFS2 SAN-backed filesystem and are run on my three or four XEN servers. I''m having issues with the loopback devices not being released when the domUs shutdown or migrate, so I decided to switch over to tap:aio for my file-backed domUs. This isn''t working, either.

Hi! Anyone have a suggestion which version of Linux would be the best host? We typically use Ubuntu but we are flexible since we want the best performance and the least amount of headaches getting it installed and working. Thanks, Jimmy _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello I have a xen node, everydays for a few minutes, the bridge will send all income traffic to all interfaces, it makes our traffic statistics incorrect, Any help is appreciated. Thanks. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

>>> On 2010/07/07 at 12:18, benco <benco@acid.sk> wrote: > No, I don''t like testsigning - this is the main reason why I want to use > Citrix driver. GPLPV driver works fine for me and if there would be a way > to use it without testsigning on, I would be happy with it. > Why don''t you like testsigning? -Nick -------- This e-mail may contain

I am not clear with the working of hypervisor xen. How does an instruction executed by kernel in Ring0 of DomU gets mapped or executed by hypervisor and then is excuted in Dom0. Is this thing some where on the wiki page? -- Tapas _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I am not clear with the working of hypervisor xen. How does an instruction executed by kernel in Ring0 of DomU gets mapped or executed by hypervisor and then is excuted in Dom0. Is this thing some where on the wiki page? -- Tapas _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Well, now that I''ve figured out that network booting XCP is not really going to be feasible, I''m moving on to my next option: flash media installation. The systems that I purchased have SDHC slots on them, so I figured I''d attempt to install XCP to one of these cards. I had already read that there''s a minimum disk size in the installer (apparently 12 GB in

Hi, folks, I''m attempting to run an e-mail server on Xen. The e-mail system is Novell GroupWise, and it serves about 250 users. The disk volume for the e-mail is on my SAN, and I''ve attached the FC LUN to my Xen host, then used the "phy:/dev..." method to forward the disk through to the domU. I''m running into an issue with high I/O wait on the box (~250%)

So, I made a mistake a bought four systems with the Intel Core i3 processors, without doing my homework to make sure that these systems actually supported VTd. Turns out there''s plenty of information out there indicating that the Core i3 processors do *not* support VTd. I was counting on VTd for two applications: Graphics Passthrough and passing through a PCIe 4-port serial card. Of

Hey everyone, I am new on the list so I don''t know if someone already send this doubt I have a server with Xen 3.X on production. I''ve seen that 4.0.0 was released a few months ago. Is it stable? Can I use it instead of 3.X already or it is not ready for production use yet? Can anyone send me a link with a good howto installation for Xen 4.0.0 please? Best Regards,

I''m trying to contain my frustration...but I''m wondering if *anyone* has *ever* gotten the Import functionality to work in XCP? I''ve tried several times, and keep getting the same obnoxious and useless error that is absolutely no help to anyone: Failed to Import. I have made sure that the transfer VM is installed (View -> Show Hidden Objects, transfer VM is there),