similar to: CPU enumeration

We''re running a handful of XCP 1.1 pools and have run in to situations wherein the local filesystem on the Dom0 control domain hits 100% capacity due to error logging in /var/log (daemon.log, messages, xensource.log, etc) thereby taking that host offline. Twice recently we''ve run in to this, on two different pools, first due to the primary SR hitting capacity and secondly when

Are there any best practice recommendations on RAID & disk type for the shared storage resource for a pool? I''m adding shelves to a HP MSA2000 G2, 24 drives total, minus hot spare(s). I can use 600GB SAS drives (15k rpm), 1TB or 2TB Midline SAS drives (7200rpm). I need about 3TB usable for roughly 30 VM guests, 100GB each, web servers so I/O needs are nominal. I''m also

Hi, referring to thread: http://www.gossamer-threads.com/lists/xen/users/177385#177385. I have the same thing going on: hypervisors with E5620 Xeon CPUs and hypervisors with E5410 CPUs. Live migrations go wrong when domU''s are not created on the latter and move from the E5410 servers to more recent ones. The rationale being that these CPU''s have less or other capabilities

Hi list, I'm now considering to buy a new server for an Asterisk installation, since I've been kindly advised<http://lists.digium.com/pipermail/asterisk-users/2007-October/198146.html>not to use an old server for a mission critical app... Well, playing around in Dell's, HP's and IBM's online stores, I've noticed a lot of Discounts or even FREE upgrades from Dual to

On a fresh installation of XCP 1.6 there is no interface in XCP Network Management. While in comman line ifconfig -a shows me both physical interfaces. I would appreciate for an ideas on what. -- Best regards, Makarov Alexey _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

Package: xcp-xe Version: 1.3.2-11 Severity: minor xe did not prove help in autocomplete for xe console command. Steps to reproduce: xe console[tab] Output (help) does not contains xe console command. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-3-686-pae (SMP w/8 CPU cores)

Hi: Sorry for the basic NOOB question but I managed to create a VM but now I am stuck. On page 26 of the XCP Virtual Machine Installation Guide it says "VNC and perform the OS installation". I tried everything I could find (listed below) but I am stuck. Any help would be greatly appreciated. Thanks in advance. Here are two questions whose answers would really help: 1.

hi all , i use ubuntu 12.04 with xcp , all config run very well except vlan i use xe network-create and xe vlan-create to build vlan 3000 then startup a vm in this network, xapi0 fakebridge and vif1.0 all looks well, use ovs-vsctl list port i can see xapi0 and vif1.0 have beed taged with 3000 but i can not access the internent~~~ somebody can help me with this? thanks.

I am testing Asterisk 1.4.22, zaptel 1.4.10.1 and libpri 1.4.4 on RHEL5 on DELL PE2950 and using ISDN-10. I thought about cutting over to production tonight when I noticed a serious problem. SIP calls are fine but if I dialed to outside (Dial(Zap/g1)) a few times or someone called in a few times, Asterisk just froze (cannot enter anything on the CLI console) and then even the machine had to be

Hi, all I''m totally new to XCP, so maybe i misunderstood the documentation. I tried to create Debian Squeeze (64-bit) and Ubuntu 10.04 from templates and install them from network installation. For Debian Squeeze (64-bit), I did the followings: 1. First ssh login into XCP host 2. xe vm-install template="Debian Squeeze (64-bit)" new-name-label=lenny-64-netinstall

Hi Folks: I am having trouble creating a Fedora 14 domU on a XCP 1.0 dom0 hypervisor and am hoping that someone can help me figure out what I am doing wrong. Here is what I did (per the user''s guide and reference manual): ## Step 1. Create the VM: # uuid=$(xe vm-install template=''Other install media'' new-name-label=''test'') ## Note: I also tried

Hello Everyone, I am new with XCP. I''ve setup several hosts with* XCP 1.0* and manage it through XenCenter and command console. Each host has two NICs, one (xenbr0) connected to a physical switch for Internet (said sw1), the other (xenbr3) connected to a physical switch for internal network (said sw2). I am trying to setup VMs and VLANs on xenbr3. I created a virtual bridge by

Hi - I''m trying to use the instructions here http://xen.pablolibo.com/doku.php to create a new VM but it''s not clear where the .cfg file should go and what to do next. I was thinking xe needs to install the vm from the /mnt/so_xen mount but i''m not sure. Are the steps on the site reasonable? Is there a way to install a vm from USB instead?  I don''t have an

Hello, I’m having difficulty to starting Ubuntu 10.04 virtual machine with XCP 0.5.0. I put 3 files (vmlinuz, initrd.gz, xm-debian.cfg) in the same place under the unpacked ISO tree but when I start the VM, the following error is returned: # xe vm-install template="Ubuntu Lucid Lynx 10.04 (32-bit)" new-name-label=Teste other-config-install-repository=nfs:10.0.0.3:

Hello, I have setup XCP using the install .iso and have been trying to do an install over http, this has failed miserably each time. So now I want to just carve out an lvm from the disk and put my .iso files in there and install off of them. How is this done? I can create an lvm easy enough but I am not sure how to mount it and expose it to XCP. Is there some type of magic I am missing? Is there

Package: xcp-xapi Version: 1.3.2-6 Severity: minor Tags: upstream If xe pif-configure-ip called twice with different IP, it did not remove old IP from interface (but didn't store both addresses in database). (Checked for management interface) Steps to reproduce: xe pif-reconfigure-ip uuid=... ip=IP1 .... xe pif-reconfigure-ip uuid=(same) ip=IP2 ... 'ip addr show' shows both

Title: HOWTO-FreeBSD-on-XCP Author: John D. "Trix" Farrar Date: 2012-02-09 * The Challenge - ParaVirtualized FreeBSD 9.0-RELEASE under XCP 1.1.0 The idea here is to create a PV FreeBSD VM under Xen Cloud Platform (XCP) without starting with an HVM first. The documentation I''''ve been able to find on-line is at least a year old and is mostly written for Xen (under

Hi, I''ve installed XCP 0.5 and I''m following these steps: http://xenbits.xen.org/xapi/install.html to install ddk VM. But I can''t get network working. I tried to create a vif under xenbr0 then assigned mannually a IP address and to create a vif under xapi0. But in both cases I can ping only dom0 IP. What am I doing wrong? Thanks in advance. -- Sergio Roberto

Hi Folks: I am a NOOB and need some help and/or advice about debugging a domU VM boot problem in XCP 1.0 beta. I am trying to get my first VM installed over the network using XCP 1.0 beta. I am able to get to the VNC boot window but the installation process fails after a few minutes with this error: Unable to retrieve http://10.45.2.1//tcc/os/CentOS-5.5-x86_64/images/stage2.img

Well, that was a lot of alphabet soup acronyms :). I''ve just been thinking about the claim in a prior post that using the xe cli with XCP abnormally increases the XCP server load. The only way I could see this happening is to be running xe from the servers command line. I use xe extensively to do the grunt work of XCCS (Xen Cloud Control System). I don''t see the loading