similar to: broken network-support for netBSD-domUs?

Dear all: I''m sorry I crossmail. I try setup aoe-vblade server on netbsd 5.0.2(domU) and I try to do some stress test with for i in {65536}; do dd if=/dev/zero of=/dev/etherd/e?.? bs=4K;done on a Linux box Two Xen dom0 configurations I use: 1. 32bits SuSE Enterprise Linux 11sp1 2.6.32.12-0.7-xen with 32bits Xen 4.0.0_21091_04-0.2.6 2. 64bits Gentoo 2.6.32-xen-r1 with 64bits Xen 4.0.0

Hi. I have a machine with a local DHCP server and a couple of virtual networks and I've configured the server for each virtual interface, so that I would be able to install VMs on the corresponding subnets using PXE. The problem is that the two DHCP servers (my local server and dnsmasq) are conflicting with each other causing the boot process to either fails or takes ages untill a VM can

Hi all, I am trying to configure a Dom U to act as a firewall and therefore I need to pass one of the two ethernet cards to the Dom-U. I configured the Xen kernel to build pciback as a module and I am passing the hide option via boot parameters. I boot the pv machine via pygrub and I am able to see the ethernet device in Dom U as follows: Dom-U#lspci 02:00.0 Ethernet controller: Broadcom

Hey folks! I want to add a CentOS 5.2 domU to an existing server (Fedora 8) which was setup by another company. The Dom0 does not provide any other services but a BIND-DHCP-server (they deleted dnsmasq and installed bind). Don''t ask my why they did that. My new DomU is connected to eth0, which is a bridge. BIND also listens on eth0 to serve other machines. I start the install of centos

Hi list, Are there any problems with the if_re ? After upgrade RELENG_7 on my laptop NIC stopped to work:( uname -a: FreeBSD notebook.minsk.domain 7.2-PRERELEASE FreeBSD 7.2-PRERELEASE #3: Fri Apr 10 20:38:55 EEST 2009 root@notebook.minsk.domain:/usr/obj/usr/src/sys/tiger-asus-a6m i386 notebook# dhclient re0 DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on re0 to

All, i have this very weird and annoying problem in my clustered setup: every ~24 hours the vista clients cant login, or even unlock there screens anymore. The error they receive is "currently no logon services available" this is very odd, because i have 2 samba 3.5.8 servers available, running and configured to handle login requests. in the mean time the people that are logged in

Hi Sebastian, It boils down to this: The previous heuristic solver could return infinite cost solutions in some rare cases (despite finite-cost solutions existing). The new solver is still heuristic, but it should always return a finite cost solution if one exists. It does this by avoiding early reduction of infinite spill cost nodes via R1 or R2. To illustrate why the early reductions can be a

Hi, I''ve run into the following error when trying to create a domU: root@jupiter:/etc/xen# xm create node0-mgmt -c Using config file "node0-mgmt". Error: Device 0 (vif) could not be connected. Hotplug scripts not working. root@jupiter:/etc/xen# Excerpt from xend.log: [2006-09-25 14:55:48 xend 2015] DEBUG (DevController:110) DevController: writing

Hello list! Just pulled down ocfs2 this morning and installed it on two RHEL 4 2.6.9-34 systems. I have followed the manual, but am not seeing some things it describes and am not sure what the problem is. I guess my first question is - do I need to have a partition formatted as ocfs2 on all nodes in the cluster for this to work? I have formatted a partition via ocfs2console on node1, and

hi Michael Adam: Thanks for you work on samba. Here I am looking for some advice and your help. I have been stuck in continuous availability of samba 4.3.9 for two weeks. Continuous availability in SMB3 is an attractive feature and I am strugling to enable it. smb.conf, ctdb.conf are attached. Cluster file system is cephfs and mount to /CephStorage client: Windows 8 Pro root at node0:~# samba

Hi, kickstarting fails due to problems with host resolution, even though the network seems to be properly configured through DHCP. eno1 and eno2 are both attached to the network, but only eno1 gets an IP via DHCP. Still `curl` cannot resolve the mirror host and the kickstart host during dracut-initqueue: rdsosreport.txt ------------------------------------------------ [...] [ 14.780428]

The free DHCP solution, ISC, seems to be having scaling issues (i.e. handling only about 200 DHCPDISCOVER and 20 DHCPRENEW requests), and I was wondering if anyone had any open source suggestions of solutions that could scale much better? (Ideally, I could find a free version of a solution like Nominum, but I know that's asking for much.) Anyone have any suggestions? -- Also on LinkedIn??

Hi All, Debian squeeze, Xen 4.0, 2.6.32-5 I successfully installed opensolaris, but when trying to convert to pygrub it just hangs. root@vhost2:/var/log/xen# xm create /etc/xen/opensolaris.cfg -c Using config file "/etc/xen/opensolaris.cfg". root@vhost2:/etc/xen# xm list Name ID Mem VCPUs State Time(s) Domain-0

Hello Samba Team ! First at all. It's seems that my problem is NOT (or not only) a Samba Winbind problem. But I need to understand what's happen to send good reports to correct maintainers. What's I'm trying to achieve : ------------------------------------------ Gnome gdm introduced a great feature that suspend the system on logout. This help a lot reducing the electric

Hi Lang, I'm surprised about the fact that you omit R1/R2 reductions in some cases. Can you give a more detailed description of the bug (e.g. a PBQP dump)? Best regards, Sebastian Lang Hames wrote: > Hi Sachin, llvm-dev, > > I've just committed a new PBQP solver which, among other things, > should take care of this bug. > > Please let me know how it works out for you.

Hello list, I have two differents installation Xen Hypervisor on two identical physical server, on the same switch : The problem is on my new server (Xen 4.0.1 with pvops kernel 2.6.32.24), I have bad performance on bandwidth I have test with a files copy and "iperf". Result iperf average: Transfert Bandwidth XEN-A -> Windows

I'm pretty new to KVM and have a KVM CentOS 7.1 hypervisor running a few VMs. I'm moving all my VMs from an ESXi host as I want to use KVM in future. Most of my VMs are working except for one which is running a Sophos UTM router (Sophos UTM is similar to products like pfSense <https://www.pfsense.org/>, Smoothwall <http://www.smoothwall.org/> etc). The host has 3 physical NICs

Dear folks, We are installing a large diskless cluster using CentOS 5.1. The hardware is pretty new - Supermicro X7DWT boards with Harpertown CPUs. Unfortunately we have some PXE-related problems described by the following scenario: 1) Set up DHCP, TFTP and NFS on a server, prepare PXE kernel and initrd - fine. 2) Start up the node using PXE for the first time - fine. 3) Reboot the node - PXE

Hi, I'm not sure what sort of diagram you mean, but I'll have a try. Does this help? It sounds like I need to do something to enable routing on what I've labelled "NIC3" on the diagram - can you please explain what I need to do? [image: Inline image 1] Regards, Phill On Tue, Sep 1, 2015 at 4:53 PM, Ajey Gore <ajeygore@gmail.com> wrote: > Can you please drop a

Hi folks, I met a problem: when 6 VM reboot at the same time, 3:00 morning, the Dom0 reboot it self: Xen version is 4.0.0, VMs are windows 2003 with redhat pv, they will update and reboot itself every 3:00 AM. # last ... ... admin pts/0 10.247.1.1 Fri Jun 25 03:40 - 04:30 (00:50) reboot system boot 2.6.31.13 Fri Jun 25 11:16 (00:-3) admin pts/0