Frank Thommen
2017-Apr-24 21:57 UTC
[CentOS] kickstart: dracut-initqueue fails due to unresolvable hostname even though network config looks perfectly ok
Hi,
kickstarting fails due to problems with host resolution, even though the
network seems to be properly configured through DHCP. eno1 and eno2 are
both attached to the network, but only eno1 gets an IP via DHCP. Still
`curl` cannot resolve the mirror host and the kickstart host during
dracut-initqueue:
rdsosreport.txt
------------------------------------------------
[...]
[ 14.780428] localhost kernel: IPv6: ADDRCONF(NETDEV_UP): eno1: link
is not ready
[ 19.977052] localhost kernel: tg3 0000:0b:00.0 eno1: Link is up at
1000 Mbps, full duplex
[ 19.977118] localhost kernel: tg3 0000:0b:00.0 eno1: Flow control is
off for TX and off for RX
[ 19.978880] localhost kernel: tg3 0000:0b:00.0 eno1: EEE is disabled
[ 19.980693] localhost kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eno1:
link becomes ready
[ 19.829468] localhost dracut-initqueue[992]: dhcp: PREINIT eno1 up
[ 19.853734] localhost dhclient[1393]: DHCPDISCOVER on eno1 to
255.255.255.255 port 67 interval 6 (xid=0x4df19201)
[ 26.030151] localhost dhclient[1393]: DHCPDISCOVER on eno1 to
255.255.255.255 port 67 interval 13 (xid=0x4df19201)
[ 26.033472] localhost dhclient[1393]: DHCPREQUEST on eno1 to
255.255.255.255 port 67 (xid=0x4df19201)
[ 26.033668] localhost dhclient[1393]: DHCPOFFER from 10.128.196.98
[ 26.038851] localhost dhclient[1393]: DHCPACK from 10.128.196.98
(xid=0x4df19201)
[ 26.067534] localhost dracut-initqueue[992]: dhcp: BOND setting eno1
[ 28.082735] localhost dhclient[1393]: bound to 10.128.196.20 --
renewal in 21301 seconds.
[ 28.456131] localhost kernel: tg3 0000:0b:00.1: irq 153 for MSI/MSI-X
[ 28.456149] localhost kernel: tg3 0000:0b:00.1: irq 154 for MSI/MSI-X
[ 28.456165] localhost kernel: tg3 0000:0b:00.1: irq 155 for MSI/MSI-X
[ 28.456180] localhost kernel: tg3 0000:0b:00.1: irq 156 for MSI/MSI-X
[ 28.456196] localhost kernel: tg3 0000:0b:00.1: irq 157 for MSI/MSI-X
[ 28.570450] localhost kernel: IPv6: ADDRCONF(NETDEV_UP): eno2: link
is not ready
[ 34.024621] localhost kernel: tg3 0000:0b:00.1 eno2: Link is up at
1000 Mbps, full duplex
[ 34.026347] localhost kernel: tg3 0000:0b:00.1 eno2: Flow control is
off for TX and off for RX
[ 34.028069] localhost kernel: tg3 0000:0b:00.1 eno2: EEE is disabled
[ 34.029776] localhost kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eno2:
link becomes ready
[ 33.803606] localhost dracut-initqueue[992]: dhcp: PREINIT eno2 up
[ 33.827664] localhost dhclient[1570]: DHCPDISCOVER on eno2 to
255.255.255.255 port 67 interval 7 (xid=0x1e8bdc4b)
[ 41.000199] localhost dhclient[1570]: DHCPDISCOVER on eno2 to
255.255.255.255 port 67 interval 15 (xid=0x1e8bdc4b)
[ 55.588353] localhost dhclient[1570]: DHCPDISCOVER on eno2 to
255.255.255.255 port 67 interval 18 (xid=0x1e8bdc4b)
[ 74.172423] localhost dhclient[1570]: DHCPDISCOVER on eno2 to
255.255.255.255 port 67 interval 12 (xid=0x1e8bdc4b)
[ 86.446514] localhost dhclient[1570]: DHCPDISCOVER on eno2 to
255.255.255.255 port 67 interval 9 (xid=0x1e8bdc4b)
[ 95.253443] localhost dhclient[1570]: No DHCPOFFERS received.
[ 95.253648] localhost dhclient[1570]: No working leases in persistent
database - sleeping.
[ 95.282175] localhost dracut-initqueue[992]: dhcp: FAIL
[ 95.353255] localhost dracut-initqueue[992]: RTNETLINK answers: File
exists
[ 102.502688] localhost dracut-initqueue[992]: Warning: can't find
installer mainimage path in .treeinfo
[ 102.517568] localhost dracut-initqueue[992]: % Total % Received %
Xferd Average Speed Time Time Time Current
[ 102.525942] localhost dracut-initqueue[992]: Dload Upload Total
Spent Left Speed
[ 102.534277] localhost dracut-initqueue[992]: 0 0 0 0 0
0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Transient
problem: timeout Will retry in 1 seconds. 3 retries left.
[ 103.527190] localhost dracut-initqueue[992]: 0 0 0 0 0
0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Transient
problem: timeout Will retry in 2 seconds. 2 retries left.
[ 105.533677] localhost dracut-initqueue[992]: 0 0 0 0 0
0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Transient
problem: timeout Will retry in 4 seconds. 1 retries left.
[ 109.542329] localhost dracut-initqueue[992]: 0 0 0 0 0
0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not
resolve host: our.centos.mirror; Unknown error
[ 109.551613] localhost dracut-initqueue[992]: Warning: Downloading
'http://our.centos.mirror/7.2.1511/os/x86_64/LiveOS/squashfs.img'
failed!
[ 109.615143] localhost dracut-initqueue[992]: % Total % Received %
Xferd Average Speed Time Time Time Current
[ 109.624698] localhost dracut-initqueue[992]: Dload Upload Total
Spent Left Speed
[ 109.625018] localhost dracut-initqueue[992]: 0 0 0 0 0
0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Transient
problem: timeout Will retry in 1 seconds. 3 retries left.
[ 110.624800] localhost dracut-initqueue[992]: 0 0 0 0 0
0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Transient
problem: timeout Will retry in 2 seconds. 2 retries left.
[ 112.631351] localhost dracut-initqueue[992]: 0 0 0 0 0
0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Transient
problem: timeout Will retry in 4 seconds. 1 retries left.
[ 116.639935] localhost dracut-initqueue[992]: 0 0 0 0 0
0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not
resolve host: our.kickstart.server; Unknown error
[ 116.650727] localhost dracut-initqueue[992]: Warning: failed to fetch
kickstart from http://our.kickstart.server/ks.cgi
[ 242.126427] our.client dracut-initqueue[992]: Warning:
dracut-initqueue timeout - starting timeout scripts
[... 120 times this warning ...]
[ 304.648460] our.client systemd[1]: Received SIGRTMIN+20 from PID 991
(plymouthd).
[ 304.650862] our.client dracut-initqueue[992]: Warning: /dev/root does
not exist
[ 304.659840] our.client systemd[1]: Starting Dracut Emergency Shell...
[ 304.684459] our.client systemd[1]: Received SIGRTMIN+21 from PID 991
(plymouthd).
[... exiting to emergency shell ...]
dropped to the emergency shell, the network config looks absolutely ok:
$ ip route
default via 10.128.196.97 dev eno1
10.128.196.0/24 dev eno1 proto kernel scope link src 10.128.196.20
169.254.95.0/24 dev enp0s20u1u5 proto kernel scope link src
169.254.95.120
$
`ip a` shows the correct IP address for eno1 and /etc/resolv.conf has
all required nameservers. From the emergency shell both hostnames
(our.centos.mirror and our.kickstart.server) are perfectly resolvable
and accessible.
The used PXE config is:
LABEL CentOS-7
kernel centos-7.2/vmlinuz
append initrd=centos-7.2/initrd.img ip=dhcp
inst.repo=http://our.centos.mirror/7.2.1511/os/x86_64 inst.ks.sendmac
inst.ks=http://our.kickstart.server/ks.cgi
Any idea, why curl cannot resolve the two hostnames or how I can debug
this further?
Cheers
frank
Frank Thommen
2017-May-15 13:04 UTC
[CentOS] kickstart: dracut-initqueue fails due to unresolvable hostname even though network config looks perfectly ok
This problem still bites us. I've tried to play around with DHCP settings (rd.net.timeout.dhcp, rd.net.dhcp.retry) to no avail. I'm happy about /any/ hint. Cheers frank On 04/24/2017 11:57 PM, Frank Thommen wrote:> Hi, > > kickstarting fails due to problems with host resolution, even though the > network seems to be properly configured through DHCP. eno1 and eno2 are > both attached to the network, but only eno1 gets an IP via DHCP. Still > `curl` cannot resolve the mirror host and the kickstart host during > dracut-initqueue: > > rdsosreport.txt > ------------------------------------------------ > [...] > [ 14.780428] localhost kernel: IPv6: ADDRCONF(NETDEV_UP): eno1: link > is not ready > [ 19.977052] localhost kernel: tg3 0000:0b:00.0 eno1: Link is up at > 1000 Mbps, full duplex > [ 19.977118] localhost kernel: tg3 0000:0b:00.0 eno1: Flow control is > off for TX and off for RX > [ 19.978880] localhost kernel: tg3 0000:0b:00.0 eno1: EEE is disabled > [ 19.980693] localhost kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eno1: > link becomes ready > [ 19.829468] localhost dracut-initqueue[992]: dhcp: PREINIT eno1 up > [ 19.853734] localhost dhclient[1393]: DHCPDISCOVER on eno1 to > 255.255.255.255 port 67 interval 6 (xid=0x4df19201) > [ 26.030151] localhost dhclient[1393]: DHCPDISCOVER on eno1 to > 255.255.255.255 port 67 interval 13 (xid=0x4df19201) > [ 26.033472] localhost dhclient[1393]: DHCPREQUEST on eno1 to > 255.255.255.255 port 67 (xid=0x4df19201) > [ 26.033668] localhost dhclient[1393]: DHCPOFFER from 10.128.196.98 > [ 26.038851] localhost dhclient[1393]: DHCPACK from 10.128.196.98 > (xid=0x4df19201) > [ 26.067534] localhost dracut-initqueue[992]: dhcp: BOND setting eno1 > [ 28.082735] localhost dhclient[1393]: bound to 10.128.196.20 -- > renewal in 21301 seconds. > [ 28.456131] localhost kernel: tg3 0000:0b:00.1: irq 153 for MSI/MSI-X > [ 28.456149] localhost kernel: tg3 0000:0b:00.1: irq 154 for MSI/MSI-X > [ 28.456165] localhost kernel: tg3 0000:0b:00.1: irq 155 for MSI/MSI-X > [ 28.456180] localhost kernel: tg3 0000:0b:00.1: irq 156 for MSI/MSI-X > [ 28.456196] localhost kernel: tg3 0000:0b:00.1: irq 157 for MSI/MSI-X > [ 28.570450] localhost kernel: IPv6: ADDRCONF(NETDEV_UP): eno2: link > is not ready > [ 34.024621] localhost kernel: tg3 0000:0b:00.1 eno2: Link is up at > 1000 Mbps, full duplex > [ 34.026347] localhost kernel: tg3 0000:0b:00.1 eno2: Flow control is > off for TX and off for RX > [ 34.028069] localhost kernel: tg3 0000:0b:00.1 eno2: EEE is disabled > [ 34.029776] localhost kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eno2: > link becomes ready > [ 33.803606] localhost dracut-initqueue[992]: dhcp: PREINIT eno2 up > [ 33.827664] localhost dhclient[1570]: DHCPDISCOVER on eno2 to > 255.255.255.255 port 67 interval 7 (xid=0x1e8bdc4b) > [ 41.000199] localhost dhclient[1570]: DHCPDISCOVER on eno2 to > 255.255.255.255 port 67 interval 15 (xid=0x1e8bdc4b) > [ 55.588353] localhost dhclient[1570]: DHCPDISCOVER on eno2 to > 255.255.255.255 port 67 interval 18 (xid=0x1e8bdc4b) > [ 74.172423] localhost dhclient[1570]: DHCPDISCOVER on eno2 to > 255.255.255.255 port 67 interval 12 (xid=0x1e8bdc4b) > [ 86.446514] localhost dhclient[1570]: DHCPDISCOVER on eno2 to > 255.255.255.255 port 67 interval 9 (xid=0x1e8bdc4b) > [ 95.253443] localhost dhclient[1570]: No DHCPOFFERS received. > [ 95.253648] localhost dhclient[1570]: No working leases in persistent > database - sleeping. > [ 95.282175] localhost dracut-initqueue[992]: dhcp: FAIL > [ 95.353255] localhost dracut-initqueue[992]: RTNETLINK answers: File > exists > [ 102.502688] localhost dracut-initqueue[992]: Warning: can't find > installer mainimage path in .treeinfo > [ 102.517568] localhost dracut-initqueue[992]: % Total % Received % > Xferd Average Speed Time Time Time Current > [ 102.525942] localhost dracut-initqueue[992]: Dload Upload Total > Spent Left Speed > [ 102.534277] localhost dracut-initqueue[992]: 0 0 0 0 0 > 0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Transient > problem: timeout Will retry in 1 seconds. 3 retries left. > [ 103.527190] localhost dracut-initqueue[992]: 0 0 0 0 0 > 0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Transient > problem: timeout Will retry in 2 seconds. 2 retries left. > [ 105.533677] localhost dracut-initqueue[992]: 0 0 0 0 0 > 0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Transient > problem: timeout Will retry in 4 seconds. 1 retries left. > [ 109.542329] localhost dracut-initqueue[992]: 0 0 0 0 0 > 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not > resolve host: our.centos.mirror; Unknown error > [ 109.551613] localhost dracut-initqueue[992]: Warning: Downloading > 'http://our.centos.mirror/7.2.1511/os/x86_64/LiveOS/squashfs.img' failed! > [ 109.615143] localhost dracut-initqueue[992]: % Total % Received % > Xferd Average Speed Time Time Time Current > [ 109.624698] localhost dracut-initqueue[992]: Dload Upload Total > Spent Left Speed > [ 109.625018] localhost dracut-initqueue[992]: 0 0 0 0 0 > 0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Transient > problem: timeout Will retry in 1 seconds. 3 retries left. > [ 110.624800] localhost dracut-initqueue[992]: 0 0 0 0 0 > 0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Transient > problem: timeout Will retry in 2 seconds. 2 retries left. > [ 112.631351] localhost dracut-initqueue[992]: 0 0 0 0 0 > 0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Transient > problem: timeout Will retry in 4 seconds. 1 retries left. > [ 116.639935] localhost dracut-initqueue[992]: 0 0 0 0 0 > 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not > resolve host: our.kickstart.server; Unknown error > [ 116.650727] localhost dracut-initqueue[992]: Warning: failed to fetch > kickstart from http://our.kickstart.server/ks.cgi > [ 242.126427] our.client dracut-initqueue[992]: Warning: > dracut-initqueue timeout - starting timeout scripts > [... 120 times this warning ...] > [ 304.648460] our.client systemd[1]: Received SIGRTMIN+20 from PID 991 > (plymouthd). > [ 304.650862] our.client dracut-initqueue[992]: Warning: /dev/root does > not exist > [ 304.659840] our.client systemd[1]: Starting Dracut Emergency Shell... > [ 304.684459] our.client systemd[1]: Received SIGRTMIN+21 from PID 991 > (plymouthd). > [... exiting to emergency shell ...] > > > dropped to the emergency shell, the network config looks absolutely ok: > > $ ip route > default via 10.128.196.97 dev eno1 > 10.128.196.0/24 dev eno1 proto kernel scope link src 10.128.196.20 > 169.254.95.0/24 dev enp0s20u1u5 proto kernel scope link src > 169.254.95.120 > $ > > `ip a` shows the correct IP address for eno1 and /etc/resolv.conf has > all required nameservers. From the emergency shell both hostnames > (our.centos.mirror and our.kickstart.server) are perfectly resolvable > and accessible. > > The used PXE config is: > > LABEL CentOS-7 > kernel centos-7.2/vmlinuz > append initrd=centos-7.2/initrd.img ip=dhcp > inst.repo=http://our.centos.mirror/7.2.1511/os/x86_64 inst.ks.sendmac > inst.ks=http://our.kickstart.server/ks.cgi > > > Any idea, why curl cannot resolve the two hostnames or how I can debug > this further? > > > Cheers > frank > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos
Tru Huynh
2017-May-15 17:30 UTC
[CentOS] kickstart: dracut-initqueue fails due to unresolvable hostname even though network config looks perfectly ok
Hi, On Mon, May 15, 2017 at 03:04:03PM +0200, Frank Thommen wrote:> This problem still bites us. I've tried to play around with DHCP > settings (rd.net.timeout.dhcp, rd.net.dhcp.retry) to no avail. > > I'm happy about /any/ hint.1) ip route seems ok, but what does your /etc/resolv.conf looks like? 2) could you try with 7.3.1611, 7.2.1511 is no longer supported. Tru> > 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not > >resolve host: our.centos.mirror; Unknown errorcurl: (6) Could not resolve host: our.centos.mirror; Unknown error -- Tru Huynh http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: <http://lists.centos.org/pipermail/centos/attachments/20170515/031df765/attachment-0001.sig>
Maybe Matching Threads
- kickstart: dracut-initqueue fails due to unresolvable hostname even though network config looks perfectly ok
- anaconda/kickstart: bonding device not created as expected
- nmcli: unwanted secondary ip-address
- After upgrade to CentOS 8.1 default gateway missing
- DNS question