similar to: Could not obtain handle on privileged command interface

Hi, I did a git pull on pv_ops tree this morning and now get a crash when eth0 is started, here is the full boot log: Booting ''Xen 3.4 / Linux 2.6.29-rc6-tip'' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /xen.gz com1=115200,8n1 console=com1,vga iommu=1 [Multiboot-elf, <0x100000:0x131748:0x8e8b8>, shtab=0x2c0078, entry=0x100000] module

Hi All, I am trying to get the pv_ops Xen dom0 kernel working with Xen 3.4 but with no success. I have been at this for 2 weeks now with different problems. Initially I could not get dom0 to boot when using LVM, so I reinstalled and didn''t use LVM. Now I am getting stack overran or currupted errors. Here is the boot log; From <IRQ 0> to the last line keeps on repeating until

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-4 Severity: normal Tags: squeeze When the monitor is being restored from power saving mode via DPMS, X will lock up/restart. This only occurs when running Xen hypervisor. Running just 2.6.32-5 -xen-amd64 doesn't produce this effect. Note that both 2.6.32-5-xen-amd64 and 2.6.32-5-xen-amd64 with Xen 4.0.1 are running with nopat (to workaround

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-1 Severity: normal My 32Bit Dom0-crashes with error "Out of SW-IOMMU space for 65536 bytes" after doing moderate I/O on the local storage, which is a software-raid1 over 3 harddrives, connected to the builtin Perc H200 controller with ext3-fs. The error is reproduceable with "dd if=/dev/zero of=bigfile bs=1024 count=1000000"

Hi, I have a system based on a Supermicro X8DTH-i motherboard and a Xeon E5506 CPU. It was previously running Debian lenny with xen-hypervisor-3.2-1-amd64 (3.2.1-2) / linux-image-2.6.26-2-xen-amd64 (2.6.26-29) without incident. I upgraded it to Debian squeeze, with xen-hypervisor-4.0-amd64 (4.0.1-4) / linux-image-2.6.32-5-xen-amd64 (2.6.32-45) and now it does not complete a boot of the dom0

Hi all! After upgrading to Squeeze, I am watching a Xen VMHost that after a while it hangs. This did not happen when I was using Xen with Debian Lenny (in this case as with Squeeze, the Xen components are from Debian repositories). In each case I connected a keyboard and monitor to the computer and the screen remained black without answering any key. This problem seems to also affect domUs,

Did a ''git pull'' a few minutes ago and tried to rebuild my kernel and was given this error: make CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm -> include/asm-x86 CALL scripts/checksyscalls.sh CHK include/linux/compile.h CC drivers/acpi/acpica/hwsleep.o drivers/acpi/acpica/hwsleep.c: In function

Hello, I''m using Xen 4.0.0 compiled from source with the 2.6.31.13 kernel that it pulls down on its own. I added support for the aacraid driver to the kernel using ''make menuconfig'' from the build-linux-2.6-pvops_x86_64 subdirectory, and then built and installed the whole thing using ''make install'' from the xen-4.0.0 directory. I compiled this

Hi, i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19 with xen-4.0.1rc5. Due some reason the system freezes from time to time. I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn''t write anything to serial console so there are no errors or something like that. Perhaps there is something to see from the logs ... Hardware Board: Intel DQ45CB CPU:

I have the xensource 3.1.0 x86_64 tarball installed over a RHEL5 clone distribution. The "ethtool" utility only returns the following information: [root@fermigrid5 etc]# ethtool eth0 Settings for eth0: Link detected: yes [root@fermigrid5 etc]# Since I have no vanilla-installed rhel5 machines with which to compare, I am not sure if I am dealing with a bug in the ethtool (whose

Package: xen-hypervisor-3.4-amd64 and linux-image-2.6.32-5-xen-amd64 Version: 3.4.3-1 and 2.6.32-15 Hello all, GRUB-PC does not automatically populate Xen related parameters in /boot/grub/grub.cfg so I added them manually (see below). All the packages involved on my Dell PowerEdge R710 running Debian GNU/Linux Squeeze AMD64 are from the Squeeze repository. There are four (4) 1TB SATA HDD

Hello, I''m attempting to boot Xen 4.0.1 on a SuperMicro H8DGi-F motherboard and having not much luck. I can boot the 2.6.32.26 (or .27) kernels alone, but when I add Xen into the mix, I get consistent boot failure. I''ve tried Xen 4.0.1-release, 4.0.2-rc1-pre and 4.0.2-rc2-pre, all get the same failure. xen/next-2.6.37 works and boots great, but since netback isn''t

Hey all, Just downloaded the new Xen 4.0 and ran Make xen Make tools Make stubdom Copied the new files from dist/install Im already running pv_ops 2.6.31.6 kernel. When I boot i get (XEN) Panic on CPU 0: (XEN) IO-APIC + timer doesn''t work! I have tried booting with noapic boot option but makes no difference. The system worked fine on 3.4.2 CPU is AMD.

I am trying to get a pv_ops dom0 working for testing, but I am running into an elf_init error: (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_init: not an ELF binary Full output attached. >From what I have read on the mailing lists, it seems that it is usually a problem with either grub or a corrupt dom0 kernel. Attached is my kernel config (2.6.28-rc6-tip). I followed the instructions on:

OK, I need to do something like this to io_apic.c - split the hardware specific parts out under mach-default, so we can override them for other subarchitectures. It's not finished, needs header file and makefile work. Would you be willing to take this if I do it? I'm not going to bother if you're not, such refactorings are a pig to maintain out of tree. Frankly, io_apic.c needs a

OK, I need to do something like this to io_apic.c - split the hardware specific parts out under mach-default, so we can override them for other subarchitectures. It's not finished, needs header file and makefile work. Would you be willing to take this if I do it? I'm not going to bother if you're not, such refactorings are a pig to maintain out of tree. Frankly, io_apic.c needs a

int.patch: - Supports only level-triggered interrupts. Edge interrupts support will be added shortly (should be fairly simple) - Change polarity trick: in order to reflect the external device''s assertion state, the ioapic pin gets its polarity changed whenever an interrupt occur. So an interrupt is generated when the _external_ line is asserted (then,

Use their proper counterparts in include/acpi/actbl*.h instead. Signed-off-by: Jan Beulich <jbeulich@suse.com> --- a/xen/arch/ia64/xen/dom_fw_common.c +++ b/xen/arch/ia64/xen/dom_fw_common.c @@ -347,7 +347,7 @@ struct fake_acpi_tables { struct acpi_table_header dsdt; uint8_t aml[8 + 11 * MAX_VIRT_CPUS]; struct acpi_table_madt madt; - struct acpi_table_lsapic lsapic[MAX_VIRT_CPUS]; +

Remove unused and pointless bits from mpparse.c (and other files where they are related to it). Of what remains, move whatever possible into .init.*, and some data items into .data.read_mostly. Signed-off-by: Jan Beulich <jbeulich@novell.com> --- 2011-03-09.orig/xen/arch/x86/acpi/boot.c +++ 2011-03-09/xen/arch/x86/acpi/boot.c @@ -177,7 +177,8 @@ acpi_parse_x2apic(struct acpi_subtable_h

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-1 Severity: important The amd64 Dom0 crashes in early boot-stage. For debugging purpose I logged Kernel-Dump with minicom over Serial Console: System is: Dell Poweredge R710 2x Intel XEON X5650 96GB RAM Perc H200 SAS Controller 3x SAS-Drive I see a possible conjunction with Bug #600241 but acpi=off doesn't solve this problem. Regards,