similar to: HVM Support

I'm looking into doing an HA setup for a Asterisk 1.4 install on Centos. I've seen a number of different pointers to packages for this some of which are packages that seem quite dated from an update perspective (Ultra Monkey links I've seen haven't been updated in a while). What is the current best practice on this for this platform? My first foray into any of the

Hi, I have installed an TE110P but forgot to change the jumper settings to E1. I don't have easy physical access to ther server at the moment so I wonder if it will be possible to run it without changing the jumper settings with a configuration like below or will it be impossible to use the card at all before I fix the jumper? I can't try it myself yet since the operator isn't ready

My local Dom(0) network stops working as soon as network-bridge is started. I''m running centos 5.3 and installed xen from repository via yum. I have a LinkSys 10/100/1000 PCI card in my machine. Driving me crazy! Any ideas? I''ve stumbled upon a couple possibles regarding using ethtool which seems to then render my bridge unusable. Any help appreciated for someone

Hi @ll, i use an intel S5000VSA server board with two xeon cpus. I installed a debian squeeze amd64 system with debian xen and qemu packages. Before i installed xen i check out successfully the virtualization flag of cpus by grep "vmx" /proc/cpuinfo After installation of xen (http://wiki.debian.org/Xen#Installation_on_squeeze) i can not run a hvm domu. xm dmesg | grep -i vmx shows

I''ve looked long and hard for an answer to this and am stuck. I have setup a Windows XP DomU on Xen 3.2-1 running on Debian and I can connect fine to the instance via VNC but I get no networking within the windows instance as it says the IP address conflicts with another on the network. All my linux instances network fine, and I''m confused as to the issue. Can anybody provide

I am having problems with silent data corruption on (some) drives connected to an MCP55 SATA controller. I have two servers, both running RELENG_7_0/amd64. One has the 570 Ultra chipset, the other has 570 SLI. Both chipsets have the MCP55 SATA controller. The server with 570 Ultra chipset has a bunch of older 250GB SATA-150 drives hooked up to the MCP55 controller and it is working just fine.

Does anyone know if I could use modprobe command to find out rather than set the jumper on a Digium PRI card? I want to find out the jumper settings on the card without opening the box which will cause down time. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I want to run a HVM domU. I have a Dell Optiplex 755: model name : Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz I have enabled VT in BIOS settings under performance. However, after I boot into a linux kernel (not under Xen), grep vmx /proc/cpuinfo returns nothing. When I boot under Xen, I get (XEN) Intel VT-d has been enabled (XEN) [VT-D]iommu.c:1700: Queued Invalidation hardware not

After contacting Asus, MSI and Gigabyte, this is what I got back. Only motherboards with the QXX chipsets and certified with the Intel VPro support the Vt-d virtualization technology. I''m not sure about MSI though, because this is what I got from their support: "Almost board could support. Please refer to our website, http://www.msi.com/product/mb/." The problem is that

my server has intel q9550 cpu (which supports intel-vt) and intel s3200 motherboard. BIOS has enabled intel virtualisation. centos 5.4, 64bit [root@localhost ~]# uname -a Linux localhost.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:03:03 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux [root@localhost ~]# grep vmx /proc/cpuinfo flags           : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36

Hello, I am looking into building a workstation using Xen to host several operating systems. Looking at the pci passthrough requirements of Xen4.1 on the VTdHowTo<http://wiki.xensource.com/xenwiki/VTdHowTo>page, I am a little puzzled with the fact that only Intel Core2Duo (with VT-x), Core2Quad, i7 and Core i5 (vPro Brand) CPU''s are supported while motherboards with the i55x0

I am using a Asus M2A-VM mainboard with Athlon X2 2300 cpu. The mainboard features a AMD 690G chipset. I thought this hardware is amd-v compatible. While using xen with hvm I get the message: root@pluto:/etc/xen# xm create /etc/xen/win.cfg -c Using config file "/etc/xen/win.cfg". Error: HVM guest support is unavailable: is VT/AMD-V supported by your CPU and enabled in your BIOS?

I have a supermicro AOC-SAT2-MV8 and am having some issues getting drives to work. From what I can tell, my cables are to long to use with SATA2. I got some drives to work by jumpering them down to sata1, but other drives I can''t jumper without opening the case and voiding the drive warranty. Does anyone know if there is a system setting to drop it back to SATA1? I use zfs on a raid2 if

On 2020-05-08 1:34 p.m., Xun Li wrote: > Hi, > > I was looking into the implementation of TailRecursionElimination, and > noticed that we have the constrain that if any call uses a local, even > though it doesn't capture the local, it would still prohibit TCE. This > contain seems unnecessary and overly limiting? I think it's a necessary limitation. The idea is that

I just downloaded Debian Squeeze and installed Xen from packages, following the instructions here: http://wiki.debian.org/Xen I am able to get PV guests up and running easily, but HVM guests will not even boot. The HVM I am currently trying to run is Debian sarge, which I installed into a disk image and configured using qemu. I am running on an HP Proliant ML150G6, which has Intel-VT hardware

Hi all, I've got a Junghanns QuadBRI card which I'm going to install on a system in Germany Anyone give me some tips on the Jumper settings? I'm guessing it's going to be NT mode with p2p? I haven't used ISDN before. I'm going to also put a Digium TDM400P card in there to plug the analog phones into. I'm just worried about the jumpers and modes. Suggestions

Hi! I''ve got a motherboard (Gigabyte GA-G33-DS3R) where the Ethernet port has been broken. I''ll buy a new motherboard, but wants to keep all my other equipment (CPU, Memory, TV-cards etc). The requirements/wishes on the new motherboard are 2 Ethernet ports and 2 PCI slots. It would also be good if it would support VT-d. I''ve found two boards that would fulfill my

i try another xen experiance on a AMD-Opteron 165 processor, but this happens: VmError: HVM guest support is unavailable: is VT/AMD-V supported by your CPU and enabled in your BIOS? cat /proc/cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 35 model name : Dual Core AMD Opteron(tm) Processor 165 stepping : 2 cpu MHz : 1000.000

On 2020-05-08 2:58 p.m., Xun Li wrote: > Eli, > Yes I was referring to AllCallsAreTailCalls. I will take a look at how > to improve this. > > Nick, > Thanks. I agree that's the proper constrain to mark a call as > tailcall, however not being able to mark a call as tailcall shouldn't > completely kill TCE. (i.e. AllCallsAreTailCalls seems overly > limiting). I

Hello everybody, i have a problem setting up a DomU with Windows XP. I get the following error: xen:/etc/xen# xm create windows.hvm Using config file "./windows.hvm". VNC= 1 Unexpected error: exceptions.OSError Please report to xen-devel@lists.xensource.com Traceback (most recent call last): File "/usr/lib/xen-3.1-1/bin/xm", line 7, in ? main.main(sys.argv) File