similar to: anyone getting corruption under GPLPV after a bug check?

On Sun, Jun 8, 2008 at 3:28 PM, James Harper <james.harper@bendigoit.com.au> wrote: > I''ve just uploaded 0.9.8 to http://www.meadowcourt.org/downloads > > As a reminder, the wiki page is > http://wiki.xensource.com/xenwiki/XenWindowsGplPv > > This release fixes a bug which could be hit under high disk load (high > number of outstanding requests with fragmented

Hello, I installed the signed drivers from http://wiki.univention.de/index.php?title=Installing-signed-GPLPV-drivers and I ran into a BSOD on a Windows 2008 Server R2 Enterprise domU with a large number of vcpu''s. The BSOD is related to xennet.sys. After some trials I found that it runs fine up to 15 cores. From 16 or more, the BSOD kicks in when booting the domU. The hardware (4 times

I have a strange problem with these drivers. I have a host that has 31 VM''s running on it, all windows. They are running the same template, which has the latest GPLPV drivers installed. The problem occurred today when I went to add the 32nd VM, again from the same template. Now when the VM boots up I get a BSOD. I tried a different template to confirm that it was not template

Trying to install them on Xen 3.4.0, Intel E5345 Processors, Server 2008 64bit. I get the BSoD on boot with the 0x0000007B stop message. I''ve got a bunch of 2003 32bits running on the same host with the 0.10.0.69 drivers and those are totally happy. I tried the boot once with NOGPLPV idea mentioned in another thread, that didn''t do the trick. Ideas anyone? pace

I have installed the 210 gplpv (debug), when I try to update them with current gplpv I get a BSOD even so when I try to uninstall them. Now I have made a bootentry that specifies NOGPLPV, what gives me a bootable system after such a crash, I found (uninstalling the leftover driver packages after getting bsod during uninstall of the main package) that uninstalling the net driver leads to bsod. Now

Hello. I have encountered a problem with GPLPV drivers for windows. It is similar (if not the same) as http://old-list-archives.xen.org/archives/html/xen-users/2011-02/msg00709.html Host is running 14 virtual machines with Windows XP. When I''m trying to start 15-th windows VM it crashes with code 0x0000007b. Booting to safe mode or with /nogplpv works ok. 15-th VM works fine if

Hi, During the install of the univention.de-signed GPLPV drivers (gplpv_Vista2008x64_signed_0.11.0.308.msi) on my Windows 7 guest, I get a BSOD "DRIVER_IRQL_NOT_LESS_OR_EQUAL" in xenvbd.sys. Afterwards, Windows won''t start. I''m now trying to do a System Restore. I will try not installing the VBD driver afterwards and see if the others do work. Full BSOD:

Hello. I''m trying to get the lastest GPLPV binary (rev 238) working on an Ubuntu Server host with Xen 4, but I''ve got some problems. The guest is a 64 bit Windows 2008 R2. After enabling test mode and rebooting, installing and rebooting again (with /NOGPLPV) I can see all the Xen devices, but two (out of three) Xen Block Device Driver have an exclamation mark; I don''t

Hi, I just tested booting Windows 2008 server 64 bit using GPLPV drivers. It seems to work with qemu traditional, but with Qemu upstream (1.1-stable) there is a BSOD when using the most recent signed GPLPV drivers (paging fault in non-paged area). -- Stay in touch, Mark van Dijk. ,--------------------------------- -----------------------------'' Sat Sep 08 08:14

Hello, I have Xenserver 5.0. When i install a new VM with Windows Server 2003 X64 Standard (R2) and install all windows-updates, it gives me a BSOD when i install the PV 0.9.12pre3 drivers. Steps to reproduce: - Install Xenserver 5 (light/free or Enterprise/trial) - Install a Windows Server 2003 x64 R2 VM from a ISO or CD - Install all windows updates - Download the GPLPV 0.9.12pre3 .exe file

Hi, I''ve noticed that on a Xen cluster with three nodes (two E5620 CPUs and one E5140 CPU) live migration works perfectly in between to two E5620 nodes, but fails to and from the E5140. The error message is about a HVM context not being able to be set. I strongly suspect the use 238 GPPVL drivers, but I cannot uninstall them at this point because someone else needs the server. Could

ok thanks for your answer so quickly !! Cheers Rémi ----- Original Message ----- From: "James Harper" <james.harper@bendigoit.com.au> To: "Rémi BERNIER" <R.BERNIER@grelier.com>; <xen-users@lists.xensource.com> Sent: Thursday, October 29, 2009 9:49 AM Subject: RE: [Xen-users] How to hide Realtek card with GPLPV 0.10.0.130 > > Hi everyone, >

1. Shouldn''t the GPLPV drivers take care of the (bad) clock drift I''m experiencing in my Windows XP HVM? Or is there some other way around this problem that I haven''t been able to find on Google? How can I tell if the GPLPV drivers are active? I''ve added the /gplpv switch to the boot.ini file and the virtual NIC is definitely using the GPLPV version but other

I''ve just uploaded 0.9.11-pre7. save/restore should be working for 32 bits on both SMP and UP, and maybe for 64 bits although it''s not tested. If someone could test migration it would be much appreciated. The installer seems to not install the drivers under 64 bit environment... but they can then be installed manually. Not sure why at this point.

I''ve just uploaded 0.9.11-pre7. save/restore should be working for 32 bits on both SMP and UP, and maybe for 64 bits although it''s not tested. If someone could test migration it would be much appreciated. The installer seems to not install the drivers under 64 bit environment... but they can then be installed manually. Not sure why at this point.

Hello James, I am doing quite rigorous torture tests with Xen and GPLPV. Let me first repeat the test setup: Use Xen 4.1.1 and kernel 2.6.32.36 (commit ae333e9). Configure 2 HVMs called VM1 and VM2 as follows (per HVM): 2 VCPUs, 2 virtual disks, 1024 MB RAM, viridian=1 Install Windows 2008 R2 SP1, do install everything twice - never clone. Install GPLPV, iometer 2006.07.27, prime95 26.6 x64,

I am rewriting the TX path in the GPLPV drivers and in its current form I am readily able to crash the system (eg Dom0 and everything else running) from DomU. xen is 3.3.1, linux is at most a week behind the 3.3.1 release date. My Windows DomU boots up, fails to get an IP address (yes, the TX path is broken), and then a short time later the system has rebooted. I don''t know exactly

I have some real problems with the xennet, when disable and try to enable the nic I get a BSoD due to ndis.sys Further more the system still fails to get an IP using dhcp. The box is after a lot of cleanup, now on the 217 GPLPV. I could provide additional details on demand next week. (I''m unsure to get the machine earlier in my reach due to an on site power outage) thx, Florian

> Date: Tue, 6 Jan 2009 13:58:55 +1100 > From: "James Harper" <james.harper@bendigoit.com.au> > Subject: RE: [Xen-users] GPLPV drivers problem > To: "Nick Couchman" <Nick.Couchman@seakr.com>, "Venefax" > <venefax@gmail.com>, <xen-users@lists.xensource.com>, > <lfernandes@lojav.pt> > Message-ID:

Hi, I just installed gplpv drive for my windows 2003 domU, but not sure if it works right, in my device manager, there is a unknown pci device, do you know what''s that? Thanks. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users