similar to: BROADCOM 5708 ON POWER EDGE 1955

Dear all, since it could be of interest for the list, here I post a link to compiled kernel for XEN 3.1 on a DELL PowerEdge 1950 compiled with gcc (GCC) 4.1.2 20061115 (prerelease) (Debian 4.1.1-21) on a Debian4 distribution. This is provided AS IS AND WITHOUT ANY SUPPORT AND/OR ANY RESPONSIBILITY :-) The first link (7 MB) pack all the files you should have in /boot. The second link (12 MB)

I totally agree with Luc Boudreau about this problem. On modern branded server they ALL use Broadcom chipset... I must admit that: a) lot of people are experiencing the problem but can tolerate it or b) someone already experienced this problem and solved it Lets'' approach the problem pragmatically... just start with a survey on the list. ... hope we solve this issue soon. Ivan

I have a new x3655 IBM and whenever the /etc/xen/scripts/network-bridge script starts, the ethernet would no longer work. This post isn''t about the cause, but the fix. I did a lot of tcpdumps and Googling, but I''ll spare you that. All they do is prove that yes, there is an issue. :) I tried Debian 4.0 i386/amd64 and Ubuntu 7.04 Server i386/amd64 and they all exhibit the

Hi all, I have a root server on which I am using Xen to segregate various tasks (mail/www...) At the moment I have the various domains all bridged and talking to the world via their own IP addresses (dom0 has one IP, the others are in a different subnet). I would like that much of the network to remain the same, but to have a second, virtual network, to allow me to have home directories

Hi all, some results from my configuration. I''ve this configuration (I''m not interested in raw top performances but in reliability.. so, I can accept slow MB/sec and prefer to rely on a RAID6, for example): 1 Infortrend iSCSI Array A16E-G2130-4 with: - 1GB DDR cache - RAID6 - 7 x 500GB sataII Seagate ST3500630NS with 16mb (no budget for SAS) - one of the logic volumes (about

Hi, Everything compiled correctly for the ocfs2 package, but so far the modules will not load with the "well known" module symbol error. FATAL: Error inserting ocfs2 (/lib/modules/2.6.16.27-0.6-smp/kernel/fs/ocfs2/ocfs2.ko): Unknown symbol in module, or unknown parameter (see dmesg) Okay not sure what is up here, any suggestions? BTW, this is the correct module location and I

Has anyone successfully built Asterisk with linux 2.6.9 kernel? It fails in my zaptel build trying to find a Makefile in the /lib/modules/2.6.9/build directory - thanks.

Hello All, I have one CentOS 6 KVM virtualization server that I built around a year ago (best I can tell it was in October 2012) at which time I would have been installing 6.3 [0]. That particular install used the Consistent Network Device Naming [1] conventions (PCIe NICs are p1p1, p1p2). I started to build out a new KVM virt server (kickstarting a 6.4 install now as compared to 6.3 back then)

Hi, I have been playing this weekend with bonding on PCI netcards and found that all of netcards I have, but old 3com, do not support MII. So bonding is not going to happen with them. Do you have some pci netcards supporting MII successfully running on bonging? Thanks, David Hrb??

> -----Original Message----- > From: Gordon Messmer > Sent: Monday, August 31, 2015 12:15 PM > > On 08/31/2015 03:51 AM, Jason Pyeron wrote: > > I feel like this is an issue of libvirt starting before networking, > > but I am a fish out of water with systemd. > > Are you using the "network" or "NetworkManager" service to > configure your

Hi all, I have a problem when from domU I need to configure a network interface. My system configuration is the next: dom0: xen 3.4.3 with 2.6.18-238.9.1.el5xen kernel, making pci back from a network card. All ok. This is the result from "lspci -v -s 09:00.0" 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) Subsystem: Broadcom

I installed 64-bit xen 3.1.0 (from xensource.com tarballs) on three new machines today, using a configuration setup that I''ve used successfully many times before. However, I encountered a new problem. These are Dell Poweredge 1950 servers, by the way. >From lspci 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 08:00.0 Ethernet

Hello Looking to build CentOS based micro EC2 instance bootable from Amazon EBS. Want that the image be minimal, so that I can add only the rpms I want. Despite looking could not find a way to import a CentOS image from scratch or an existing minimal CentOS image that is bootable from EBS. My server must must persist, as I cannot handle issues with a dynamic server, so I want to use a server

Howdy, I hit a snag trying to install Xen4CentOS on a Supermicro based system (X9DRD-7LN4F with the Broadcom/LSI 2308 chipset). I spent a few hours on this today, I'm posting this here in case it helps anyone else and saves them the frustration I dealt with. On this system I did a fresh install of CentOS 7, updated it, rebooted it, then installed Xen. The system was booting fine using the

Does anyone have some tips for setting up Broadcom's 802.3AD support or just getting their driver compiled / installed? First off, I noticed redhat claims the broadcom bcm5708 driver has been added to the rhel4 kernel. But I don't see /proc/net/nicinfo which broadcom claims the driver creates when it's successfully initialized. So, I'm trying to build the driver based on the

Hi, I have a Dell PowerEdge 1950 with two NICs Broadcom NetXtreme II BCM5708 1000Base-T. I installed CentOS 5.1 and Xen 3.0.3 (RPM). One of my virtual machines has Windows 2003 Server. In this virtual machine my NICs appears like "Realtek RTL8139 Family PCI Fast Ethernet NIC". The problem is that when I ping to other machines sometimes the reply time value is very high: C:>

Hi, I don't have ifcfg-eth1 in my /etc/sysconfig/network-scripts. But when I do ifconfig eth1 I can see output as below. If I do ifconfig eth12 , I don't see anything which i am assume is normal. eth1 Link encap:Ethernet HWaddr 00:24:E8:44:DB:CC BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0

Patch supplied by Mikhail Gordeev, posting for review. I have compile tested it and checked the code and it looks all fine to me, so ACK from my point of view. I did not actually run it because I don't have an ALT Linux install, but it doesn't seem as if it would affect any other distro. Rich.

Hello folks, I have a compiler written with LLVM 2.6 by a student that produces .ll files, It behaved fine at the time. Trying to take the work over using version 3.0, I run into the problem that "malloc" in the IR is no longer valid: semac1 menu > llvm-as Carre.ll llvm-as: Carre.ll:68:14: error: expected instruction opcode %_malloc = malloc i8, i32 %2 ;

Hello list, I have two differents installation Xen Hypervisor on two identical physical server, on the same switch : The problem is on my new server (Xen 4.0.1 with pvops kernel 2.6.32.24), I have bad performance on bandwidth I have test with a files copy and "iperf". Result iperf average: Transfert Bandwidth XEN-A -> Windows