similar to: Problems setting up Ali USB controller

Hi I have an Asus M2N32 WS Pro, 4G Ram, AthlonX264 4600+. I Installed SuSE 10.3 (64bit) on Dom0, LVM on Raid 5. All domU''s boot off LVM, using same Suse 10.3. I have a firewall (fw) domU running shorewall and a domU name-dhcp-server (nds). Somewhere in between 10 and 16 hours the network stalls. In dns, I can see dhcp queries and offers, but these never make it to the clients in the

Hi, once again, Problems with pciback and pci passthrough the system -------------------------------------------------------------------------------- DOMAIN0:~# lspci -tv -[0000:00]-+-00.0 nVidia Corporation nForce3 250Gb Host Bridge +-01.0 nVidia Corporation nForce3 250Gb LPC Bridge +-01.1 nVidia Corporation nForce 250Gb PCI System Management +-02.0

I am a bit confused on the PCI stuff. PASSTHRU-- does this mean that pcifront is not needed? Or only that the PCI is not limited as it is with slot. In general, none of the docs are getting me anywhere with xen 3.0.3. Example: I run this: echo -n 0000:2:0.1>/sys/bus/pci/drivers/pciback/new_slot echo -n 0000:2:0.0>/sys/bus/pci/drivers/pciback/new_slot echo -n bind 0000:2:0.0 >

Hello, I''m trying to do a pci passthrough for a perc 5/i raid controller and i have 2 problems (i haven''t used linux systems recently so i may be a bit rusty) : On the hardware part i''m using an ASUS M4A89TD PRO motherboard with iommu enabled in bios (and i can see with "xm dmesg" that I/O Virtualization seems enabled by xen). On the software part i

Hi, I have a PC with 3 ethernet interfaces. I am trying to a) assign 2 ethernet interfaces exclusively to one domU by using the late binding method and b) to use a bridge between the third interface and dom0 (that works fine). The goal is to not to have to use bridges for the exclusively assigned interfaces. Is it possible? (If not, no need to read the rest) The problem I have is that I

I am using the latest xen unstable and trying to install this 00:19.0 Ethernet controller: Intel Corporation 82562V 10/100 Network Connection (rev 02) since xen uses 2.6.16.29 it does not support it yet, someone said (on google) that 2.6.18.3 supports it. So I want to boot 2.6.18.3 in domU and enable it with the pciback thing. my seize commands are: echo -n 0000:00:19.0 >

Hello, I´m trying to map one network interface of a Dual-Port e1000 Server Adapter to a DomU (firewall). In Dom0 the adaper is seen with lspci as: 06:00.0 Ethernet controller: Intel Corporation 631xESB/632xESB DPT LAN Controller Copper (rev 01) 06:00.1 Ethernet controller: Intel Corporation 631xESB/632xESB DPT LAN Controller Copper (rev 01) My goal is to map only 06:00.1 to DomU so I used this

Trying to set up PCI pass through with xen 3.2.1 on Debian Lenny, with xen Kernel 2.6.26... having no luck. I have the following configured... i) Virtualization and vt-d are both enabled in the bios, I have power cycled after making these changes. ii) I have these option in grub menu; iommu=1 pciback.permissive pciback.hide=(07:01.0)(01:00.0) vtd=1 iii) I have this in my cfg file

Hello everybody, for just one week I try to install three servers on an OpenSuSE 10.3 dom0 equipped with 4 NICs. One server is an OX using the onboard NIC via xenbr0. This server runs!! For my IPCop server I intended to use the three remaining NICs (Intel Pro100/S, 3Com 3C590, Realtek RTL-8139). These three NICs should be used natively by my IPCop. So I tried to use the pciback driver. I wrote a

Hi! As dom0 I''m running Ubuntu Hardy withe xen 3.3 from backports. Reason to using xen 3.3 is that I could get Intrepid stock kernel to work as domu with xen 3.2. Now the problem I have is that I can''t passthrough PCI-devices to my domu. If I run lspci in the domu nothing is returned. I''ve tried to use the kernel from Hardy (2.6.24-21-xen) and stock kernel from

Hi all! I want to assign a physical network card (e100) to a domU: I think Dom0 is ok but domU does not recognize the pci nic. into DomU I don''t know wath should I see: I have nothing in dmesg nor in messages... Into Dom0 I have this modules.conf: options pciback hide=(0000:03: 08.0) install e100 /sbin/modprobe pciback; /sbin/modprobe --ignore-install e100 This is dmesg: pciback

On 3/22/23 04:23, nospam at godawa.de wrote: > Jim Fehlig schrieb: >> >> What is the libvirt version? > > It's the "latest and greatest" I get from this source: > > [root at xen1 ~]# virsh --version > 6.6.0 > > [root at xen1 ~]# libvirtd --version > libvirtd (libvirt) 6.6.0 > > [root at xengfs1f ~]# yum list | grep libvirt >

Hi there, After updating a server from CentOS 5.3 to 5.4 my Xen pci-passthru setup has some troubles. The server has two NICs, one used by dom0 and the other assigned to a domU and one SCSI controler assigned to another domU. It has been working fine since CentOS 5.1, when I did the initial setup. After upgrading to 5.4, I get this error when starting the domU with one of the NICs assigned:

I''ve been trying to set up a VGA-passthrough on my Ubuntu 12.04 box to run Windows (for gaming) while leaving my RAID-5 array available (managed by Linux). First, here are the machine specs: CPU: AMD A8-3870K 3.4GHz Quad-Core APU GPU: APU-integrated AMD Radeon 6550 (shared memory) Mobo: ASUS F1A75-V EVO with AMD-virtualization enabled in UEFI-BIOS RAM: 8GB DDR3 1866 G-Skill Sniper

Hi All, Please help me. I am now installing the XEN on my PC and trying to config the pci pass through. My motherboard is intel DQ45CB which is vtd enabled. I downloaded the latest xen4.0 source from xen.org which is the latest release. I downloaded stable-2.6.32-x dom0 kernel source from jeremy''s repository. After compiling the xen and dom0 kernel, I could play it. I could create

Hi All, Please help me. I am now installing the XEN on my PC and trying to config the pci pass through. My motherboard is intel DQ45CB which is vtd enabled. I downloaded the latest xen4.0 source from xen.org which is the latest release. I downloaded stable-2.6.32-x dom0 kernel source from jeremy''s repository. After compiling the xen and dom0 kernel, I could play it. I could create

I have post a message about this topic @questions but I have not get feed back. My laptop has an ALi M5451 Sound Card. I am using FreeBSD4.8-STABLE with the "device pcm" activated in the kernel. At boot time I get this output from the kernel: pcm0: <Acer Labs M5451> at device 4.0 on pci0 pcm0: unable to map register space device_probe_and_attach: pcm0 attach returned 6 Searching

Hi I have 2 port T1 card in asterisk server. I am facing following problem, Span 1 is connected to e&m circuit with wink-start Span 2 is connectecd to e&m circuit with feature group d Is I activate the span two then I faced the following problem. 1 call come on channel 26 then all of a sunnden asterisk try to run the automated menu on different channel (i.e 31)

Sorry to duplicate my issues onto the list - I thought I had looked through this thread before and seen a different error, but apparently Adam and I are running into much the same thing. I'm seeing exactly the same "Failed to assign device to IOMMU" along with the "Device not owned by PCI Back End or pci-stub" in these scenarios. I have not gone back to previous versions,

Despite what Keir said on your timing requirements, I guess you get the famous co-assignment message. See at the end of this: http://www.nabble.com/xen-3.3.0-pv-pci-passthrough-co-assigned-problem-td20008460.html BR, Carsten. ----- Originalnachricht ----- Von: mdlabriola@yahoo.com Gesendet: Mit, 15.4.2009 13:56 An: xen-devel <xen-devel@lists.xensource.com> Betreff: [Xen-devel] 3rd party